How To Back Up Certain Table Or Files

Mar 31, 2008

hello everyone... i need ur help... how can i back up only a certain table that i want using sql server management studio?? or mbe some commands...???

View 10 Replies


ADVERTISEMENT

How To Back Up Certain Table Or Files

Mar 31, 2008

hello everyone... i need ur help... how can i back up only a certain table that i want using sql server management studio?? or mbe some commands...???

View 5 Replies View Related

How To Come Back MDF And LDF Files

Aug 16, 2005

hi..

I had to re-install my operation system.. and I did

I had no time to backup my sql data..

to reinstall OS was surprise for me!

I opened my computer but my OS didn't start


now, mssql datas are another partition.

they are like below

Quote: tbl1_Data.MDF
tbl1_Log.LDF
Quote: tbl2_Data.MDF
tbl2_Log.LDF

is there any way to use them again

I installed mssql in new OS, I picked the folder that has my old datas as my new SQL data folder..

but it doesn't work..

View 2 Replies View Related

Back-up DB But Keep The Files For 3 Days?

Jun 17, 2006

Hi
I
have created a job to backup all our database. It works fine and
creates .bak files in default folder. I have scheduled the task to run
every 4 hours.

My question is how can i modify or program this
backup plan to keep the backup files for only last 3 days and delete
older backup files?

Mits

View 26 Replies View Related

Getiing The Database Back From MDF Files

Jan 31, 2000

Hello All!
Here is an intresting and challenging question to you all.
One of our idiot admin happens to reinstall the SQL Server with out realizing that other are have databases on that server.
I have the MDF files on the server. Is there any way I can create the databases and point to that MDF files so that they can have the data and the table structures back. Itired to create the database that way the databse gets created but its having trouble actibvating those files. Some please help.
Regards

View 1 Replies View Related

SBS 2003 And SQL Server Back Up Files

Nov 13, 2007



I am trying to figure out how the back up is performed on my sql as I seem to have quite a few very large BAK files that I want to know if I can delete them.

These files have grown to about 85Gs

The IT group told me that the were going to set up the SQL to back up as a file and then SBS 2003 would back up this file onto the USB drive. The IT people that set this up have really sold me a lot of BS about so much that I have decided to get control of all aspect of the SBS2003.

How to I verify that the SQL is being backed up and can I delete these really big old dated BAK files?
Thanks Kevin..

View 8 Replies View Related

Full Back Does Not Release Used Space Of Log Files

Sep 14, 2000

SQL7: After doing a full backup Enterprise
Admin still shows "Transaction log space"
in use. Isn't it that way that full backup
releases all space formerly used by
log files?

Greetings from Mannheim, Germany
Ricardo

View 3 Replies View Related

Accidentally Deleted A Table In My Local SQL Server How Can I Get Back The Table

Jan 13, 2004

Hi,

I accidentally deleted a table in my local server. How can I get back the table? I did not do it as a transaction!

Thanks in Advance

View 1 Replies View Related

Table Scans - More Rows Brought Back Than In Table

Jul 20, 2005

I have a query which is quite complex. It's based on a set of data ina complex view which takes the data from several tables.In this complex query, if I allow the various parts of the query towork on the results of the view (MISView), it can take 15 minutes torun (eek !), however, if I create a temporary table with the data fromthe view and then use that for the remainder of the query, it runs inapprox 20 seconds.Now, I have examined the execution plan (my new favourite toy) andthere is a difference (as expected). However when looking at the partof the query that takes up most of the time, it shows that it bringsback 109,645,866 records from a table (Credit) that contains 13,002records. This table is one that is referenced in the view (MISView)which contains 13,653 records and does get some of it's data from thetable which is scanned (Credit).For the record, we don't have any tables with over 100,000 records in,so 109 million rows is going some for us. The part of the query thatruns slow does reference another copy of itself but this is necessaryfor the equation that is being run.Now I'm OK with why it's doing the table scan, but why does it bringback substantially more data than is in the table ? Is it somemultiple of the number of records that it's trying to work out. Iassume it tries to run a seperate plan for the view as part of it'sprocess.Ideally, I'm still going to go down the route of the temporary table,but I would like to understand more about what it does first as Idon't like leaving things unanswered.Any help would be appreciated.

View 6 Replies View Related

Table Back Up

Apr 14, 2008

Please suggest me how to take table back up from a database.

View 6 Replies View Related

Back Up Table

Mar 17, 2008

dear db gurus,

can you help me how to get back up for
the table in a database...

regards
dass

View 4 Replies View Related

Having Difficulty Setting Back Up To Back Up File Wihout Datetime Stamp SQL 2K

Apr 24, 2007

Hello,I'm trying to create a simple back up in the SQL Maintenance Plan that willmake a single back up copy of all database every night at 10 pm. I'd likethe previous nights file to be overwritten, so there will be only a singleback up file for each database (tape back up runs every night, so each daysback up will be saved on tape).Every night the maintenance plan makes a back up of all the databases to anew file with a datetime stamp, meaning the previous nights file stillexists. Even when I check "Remove files older than 22 hours" the previousnights file still exists. Is there any way to create a back up file withoutthe date time stamp so it overwrites the previous nights file?Thanks!Rick

View 5 Replies View Related

How To Back Up Table In SQL 2000

Jul 6, 2001

How to Back up table in SQL 2000

View 3 Replies View Related

Bring A Table Back

Feb 25, 2004

Hello, everyone:

I have deleted a static table accidentally in production. How will I bring it back? Thanks a lot.

ZYT

View 2 Replies View Related

Mirroring :: Principal Database Get Role Back After Being Back On Line

May 14, 2015

New to Database Mirroring and I have a question about the Principal database server. I have a Database Mirroring setup configured for High-safety with automatic fail over mode using a witness.

When a fail over occurs because of a lost of communication between the principal and mirror, the mirror server takes on the roll of Principal. When communication is returned to the Principal server, at some point does the database that was the previous Principal database automatically go back to being the Principal server?

View 2 Replies View Related

Reporting Services :: Run Two Reports Back To Back Without Page Eject?

Jun 9, 2015

I need to run two reports each of A5 Size to run back to page and print on single A4 paper means in 1st half Sale bill will be printed and in second half Gate Pass Will Be Printed both report will be on same page and size and shape should be maintained. How to do it.

View 4 Replies View Related

Copy Table Data Back And Forth

Mar 16, 2006

This is probably a dumb question.. but here goes.

I'd like to make a copy of several tables before changes are made to them so that I can 'roll back' if necessary.

What I 'thought' i could to was this:

select * into mytable_temp from mytable

and then to roll back..

truncate table mytable

Select * into mytable from mytable_temp

When I try and select back into my original table, it says I can't because the object already exists.. What is a better way to accomplish this????

View 14 Replies View Related

Pass Back One Value From UDF Having Found It In A Table

Feb 8, 2007

How do I pass back only one value, such as TotalJobPrice from the tblJobRecords when I know which JobID to Select. All I want is the TotalJobPrice returned from the UDF, not a record from the table. I can write a UDF that will return a table, but I don't know how to get the one field of data from that table of one row that can be returned from a UDF that returns a table. I want to be able to write something like this: @TotalJobPrice = fnTotalJobPrice(@JobID)
Hope that is clear.
Thanks in advance,

View 7 Replies View Related

Write A Date Back To A Table In An Expression

Mar 12, 2008

Help,

I have a package that maps the current getdate to a variable.

I then want to be able to write that variable back to a table using a sql task using the following expression:

"INSERT INTO CONTROL_BATCH_HEADER VALUES (
" + (DT_STR, 10, 1252) @[Control::intAdtBatchId] + ",
'" + @[Control::strSubjectArea] + "',
convert(datetime, '" + (DT_STR, 30, 1252) @[Control::dteRunDate] + "',131))"


The problem is the date is being written back in the wrong format. I've tried changing the mask to 121 but the month is being written as the day.

Help, how can I make this work regardless of the locals. In oracle I would just put a to_char(date,'dd-mm-yyyy') but not sure what to do here.

Thanks for your help

Stapsey

View 1 Replies View Related

How To Insert Back Salesh Into Table Using Query?

Jun 16, 2007

Hi ,
i am working with .net and as backhand using mySql.
i have done all configration to use the database drive, my problem is i want to insert a path of my xxx selected file from open dialog box. we all know very well that paht has back salesh like "c:data estfilename" that is cause of my problem when ever i insert a path into my table of mysql it accesses all put in different way like "catatestfilename".
that is what i hope u understood what i want to know.
any one who has some idea please mail me.
i will thankfull for your's concern.
bye
keep thinking.

View 3 Replies View Related

Write To A Table In A Rolled Back Transaction.

Mar 4, 2008



Hi,

Is there a way to write to a log-table inside a transaction which is rolled back without rollback of this log-entry.

thanks in advance
Raimund

View 9 Replies View Related

Sending Sql 2005 Table Back To DB2 AS400

Apr 10, 2008

I am trying to send a file from SQL 2005 back to our AS400 DB2 db. First time trying to get this to work in SSIS.

I have a couple fields that are datetime in SQL Server and see SQL server sees datetime fields from DB2 as string so I am converting them to Strings using derived columns. That part seems to work fine. Get no errors on that part.

The conversions seem like they are working but it is faling when it tries to send it to as/400. I get the following error: any ideas on what is wrong?

[OLE DB Destination [1569]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "IBMDA400 File Rowset" Hresult: 0x80004005 Description: "CPF5029: Data mapping error on member DSSCNTL. ". An OLE DB record is available. Source: "IBMDA400 File Rowset" Hresult: 0x80004005 Description: "CPF5035: Data mapping error on member DSSCNTL. ". An OLE DB record is available. Source: "IBMDA400 File Rowset" Hresult: 0x80004005 Description: "CPF5035: Data mapping error on member DSSCNTL. ".


I even created a sql table with same field sizes as one I am sending to AS400 and its sucessful there. So seem like it mght have somthing to do with sending to AS400 but not sure what.

Any ideas?

Stacy

View 1 Replies View Related

How Do I Back-up &> Truncate &> Shrink &> Back-up SQL 2000

Jul 20, 2005

Hello,I am hoping you can help me with the following problem; I need to process the following steps every couple of hours in order to keep our Sql 2000 database a small as possible (the transaction log is 5x bigger than the db).1.back-up the entire database2.truncate the log3.shrink the log4.back-up once again.As you may have determined, I am relatively new to managing a sql server database and while I have found multiple articles online about the topics I need to accomplish, I cannot find any actual examples that explain where I input the coded used to accomplish the above-mentioned steps. I do understand the theory behind the steps I just do not know how to accomplish them!If you know of a well-documented tutorial, please point me in the right direction.Regards.

View 2 Replies View Related

Data Access :: Adding Back Constraints To Table

Nov 11, 2015

I have removed all constraints of a table.I have a copy of the database as back up, now how can i add back the constraints to the removed table.

View 6 Replies View Related

How Do You Grab Keys From Dimensions And Store Them Back Into Your Table

Nov 16, 2006

I have run into an issue that seems very simple but I am new to SSIS and DBs in general and therefore cannot solve it. I would like to take data from a SQL Server table, lookup a key from a dimension table and update the same SQL Server table with this data. Is there anyway to do an update using SSIS?

Thanks,

Curtis

View 1 Replies View Related

Transact SQL :: Get Back (Identity) ID To The Other Table In SSIS Data Flow?

Jul 17, 2015

Table 1:

-------     -----                ----          ----
Name       Add                  No         RowID
-------     -----                 ----         -------

aa     #a-1,India                              10
bb     #a-1,India                              11                
aa     #a-1,India                              12

----------------------------------------------------

 table 1 inserting to Table 2 (Using 1st Data flow)

Table 2:

-------     -----                ----
Name       Add                 ID(Note:Here Identity1,1)
-------     -----                 ----
aa     #a-1,India                 1
bb     #a-1,India                 2
aa     #a-1,India                 3

----------------------------------------------------

My Requirement is Update  Table 1 set Column::No=Table 2.ID
                                                                       
based on Exact Match of
                                                                        
Table1.Name=Table2.Name  and
                                                                        
Table1.Add=Table2.Add

It means Get back the Id for Source Table 1

 2nd Data flow
             Source(Table1:Name, Add,No)
                          |

   --LOOKUP(Table2:Name, Add::Matched Look Columns Name, Add and
Tick Mark on ID)
                         |(Match)

   -->OLEDB Command: update Table1 set N0=? where  RowID=?(Here Param_0= NO ,Param_1=RowID)

Here My Issue is if  Table 1 had Duplicates(same Name, Add, but Row Id is different it is Updating Same ID for Table 1.No It means Get Back ID correctly not updating Result::

Table 1:

-------     -----                ----          ----
Name       Add                  No         RowID
-------     -----                 ----         -------
aa     #a-1,India                1              10
bb     #a-1,India                2              11                
aa     #a-1,India              1 12

----------------------------------------------------

My correct Output is     3      instead of Result:Table1 1.NO  1   where RowID =12

It caused by LOOKUP , It picking Top1 ID while Matching Look on fields.

How Should I update the (Identity) Get Back Table 2.ID to Source Table1. NO  in Above logic in SSIS?

View 11 Replies View Related

Saving A Stored Procedure As A Csv File Back Into A Table In The Database

Feb 25, 2008

I have a table that has 5 values that I want to MSSQL to create a csv file for. After it is created, dump that csv file back into the database as a binary file. Is this possible?

View 1 Replies View Related

How Do You Roll Back Transactions For A Single Table From The Current Transaction Log?

Nov 1, 2007



Goofed up and ran an update query. It messed up all the data in a single table. I'm trying not to restore the table from a previous backup since the backup is more than 20 GB. It's going to take forever to restore it. Any advice would be much appreciated!

Thanks!
Charles.

View 3 Replies View Related

Problem With Update When Updating All Rows Of A Table Through Dataset And Saving Back To Database

Feb 24, 2006

Hi,
I have an application where I'm filling a dataset with values from a table. This table has no primary key. Then I iterate through each row of the dataset and I compute the value of one of the columns and then update that value in the dataset row. The problem I'm having is that when the database gets updated by the SqlDataAdapter.Update() method, the same value shows up under that column for all rows. I think my Update Command is not correct since I'm not specifying a where clause and hence it is using just the value lastly computed in the dataset to update the entire database. But I do not know how to specify  a where clause for an update statement when I'm actually updating every row in the dataset. Basically I do not have an update parameter since all rows are meant to be updated. Any suggestions?
SqlCommand snUpdate = conn.CreateCommand();
snUpdate.CommandType = CommandType.Text;
snUpdate.CommandText = "Update TestTable set shipdate = @shipdate";
snUpdate.Parameters.Add("@shipdate", SqlDbType.Char, 10, "shipdate");
string jdate ="";
for (int i = 0; i < ds.Tables[0].Rows.Count - 1; i++)
{
jdate = ds.Tables[0].Rows[i]["shipdate"].ToString();
ds.Tables[0].Rows[i]["shipdate"] = convertToNormalDate(jdate);
}
da.Update(ds, "Table1");
conn.Close();
 
-Thanks

View 4 Replies View Related

Reseting The Auto-Number For A Table Back To Zero And Compact/Repair Or Unload/Reload For SQL Server 2000.

Mar 6, 2007

After deleting all the test data from all tables in a SQL 2000 database, is there a way to reset all the auto-incrementing fields back to zero in one shot? In Access, you can run the Compact and Repair option. Also, in Sybase SQL, there was an "unload/reload" option to reduce the database size. Is there a similar function in SQL2000? Thanks for all the help

View 1 Replies View Related

Rolling Back SQL Server 2005 Databases Back To SQL Server 2000

Sep 22, 2006

Does anybody know of a way to rollback SQL Server 2005
databases back to SQL Server 2000? Is there a way of doing it without
resorting to Copy Database Wizard? I love to find a way of attaching a SS 2005 database
to a SS 2000 instance without any issues.



I recently upgraded to SS 2005 and I am very unhappy with the SS 2005 and I
want to rollback to SS 2000, which was a lot more stable. I am having
several major issues that are affecting my whole company's day-to-day
operations and the managers are not happy. Some of the issues include
night time batch running very sluggish for no apparent reason. This is a
biggest problem because it only occurs once or so a week and causes a disturbance
with the daily activities when the night time processing isn€™t completed on
time. The rest of the time, the batch processing runs great, even a little better then on SS 2000. I
don't believe it is a matter of my application needing to be retuned because if
that was the case, then why isn't it running sluggish every night? Also,
it's never the same day that the sluggish behavior occurs. If it was occurring
on the same night, then I would have something to investigate within our
application, but it doesn't. Another issue that I am having involves a
night time job that restores a copy of the production database to the Data
Warehouse server to be used for updating the data warehouse. Again, most
of the time it runs great (~2 1/2 hours), but once or twice a week, it goes
stupid and takes 6 1/2 hours for no apparent reason. Again, it is not happening
the same day either, which could give me something to invesigate. On SS 2000, this same job ran flawlessly. Never I did I run into situation that the
database restoration took that long to run. Even another issue involves a SQL Server Agent Job that was put into suspended
state. What's a suspended state and how can I get it out of suspended
state? I can find no information about suspended state in BOL. I
did a Google and nothing came up. If this suspended state was put
in for security reasons, great, but then tell me how I can remove the suspended
state. I am also not happy with the
fact that I can't get accurate information about the queries that are actively
running at that particular moment. In SS 2000, when I noticed high CPU
usage on the server, I would run the sp_who2 active stored proc and it would
show me all the active thread and how much CPU it was consuming. I would
then find the running threads with the highest CPU numbers and investigate the
query and see if we could improve it. Now in SS 2005, I get in the same
situation and run the sp_who2 stored proc, and there is no smoking gun.
All of the active threads are showing very little CPU usage, which I am very
suspect of. What the heck happen to sp_who2? I looked at some of
the other ways of looking at running processes (i.e... sys.sysprocesses) and
they don't appear to be giving the information that I need.



I am very unhappy and I just want to roll back to SS 2000 and wait a couple of
years before I upgrade to SS 2005.


Dave Brown

View 1 Replies View Related

How To Take Data Out Of Table, Restructure The Table And Then Put The Data Back In

Oct 26, 2005

Hi AllWonder if you could help, I have a bog standard table called STOCKPRICESthat has served me well for a while, but now I need to change the structureof it and because a number of users have used it in it's present form I needto so the following in SQL script:a) Grab a snapshot of the current SQL data.b) Re-structure the STOCKPRICES table.c) Post this grabbed data back, but in the new format.My script plan was to firstly to rename the current STOCKPRICES table toSTOCKPRICESOLD (you can do this can't you), create a new STOCKPRICES tablein the new format and then somehow extract the data from STOCKPRICESOLD andsquirt it into STOCKPRICES.The current schema for STOCKPRICES is as follows:# --------------------------------------------------# Table structure for table 'STOCKPRICES'# --------------------------------------------------DROP TABLE IF EXISTS `STOCKPRICES`;CREATE TABLE `STOCKPRICES` (`STOCKID` VARCHAR(30),`CURRENCYID` VARCHAR(30),`HDNETAMOUNT` DECIMAL(10,3) DEFAULT 0,`HDTAXAMOUNT` DECIMAL(10,3) DEFAULT 0,`RRPNETAMOUNT` DECIMAL(10,3) DEFAULT 0,`RRPTAXAMOUNT` DECIMAL(10,3) DEFAULT 0,`NETAMOUNT` DECIMAL(10,3) DEFAULT 0,`TAXAMOUNT` DECIMAL(10,3) DEFAULT 0,INDEX `indxCUURENCYID` (`CURRENCYID`),INDEX `indxSTOCKID` (`STOCKID`));Like I said it's very basic.My new table wants to be like the following:# --------------------------------------------------# Table structure for NEW table 'STOCKPRICES'# --------------------------------------------------DROP TABLE IF EXISTS `STOCKPRICES`;CREATE TABLE `STOCKPRICES` (`STOCKID` VARCHAR(30),`CURRENCYID` VARCHAR(30),`PRICELEVELID` VARCHAR(30),`NETAMOUNT` DECIMAL(10,3) DEFAULT 0,`TAXAMOUNT` DECIMAL(10,3) DEFAULT 0,INDEX `indxPRICELEVELID` (`PRICELEVELID`),INDEX `indxCUURENCYID` (`CURRENCYID`),INDEX `indxSTOCKID` (`STOCKID`));The new re-structure means that PRICELEVELID will include a unique referenceto the HD, RRP, standard prices (plus 3 others that I'm going to create).I know this probably very simple data architecture to you guys, but I'm sureyou can appreciate why I need to change the structure to this method so thatI'm not creating redundant data fields if the user only enters a standardprice I won't be storing nothing for the 2 x HD and 2 x RRP price fields.I don't think I've got a problem renaming the old one and re-creating thenew one, but how do I get the data from one to another?My problem is that I have:code, currency, hdnet, hdtax, rrpnet, rrptax, net, taxIVP GBP 2.00 0.35 200.00 35.00 100.00 17.50etc...and I need to get it into the format:code, currency, pricelevelid, net, taxIVP GBP hd 2.00 0.35IVP GBP rrp 200.00 35.00IVP GBP standard 100.00 17.50etc...Any ideas?RgdsLaphan

View 4 Replies View Related

Last GASP On Insert Row In Table With Identity Field, And Get New Identity Back ?

Jul 9, 2006

While I have learned a lot from this thread I am still basically confused about the issues involved.

.I wanted to INSERT a record in a parent table, get the Identity back and use it in a child table. Seems simple.

To my knowledge, mine would be the only process running that would update these tables. I was told that there is no guarantee, because the OLEDB provider could write the second destination row before the first, that the proper parent-child relationship would be generated as expected. It was recommended that I create my own variable in memory to hold the Identity value and use that in my SSIS package.

1. A simple example SSIS .dts example illustrating the approach of using a variable for identity would be helpful.

2. Suppose I actually had two processes updating these tables, running at the same time. Then it seems the "variable" method will also have its problems. Is there a final solution other than locking the tables involved prior to updating them or doing something crazy like using a GUID for the primary key!

3. We have done the type of parent-child inserts I originally described from t-sql for years without any apparent problems. (Maybe we were just lucky.) Is the entire issue simply a t-sql one or does SSIS add a layer of complexity beyond t-sql that needs to be addressed?



TIA,



Barkingdog

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved