How To Cancel A Sql Query Running From Front End
May 31, 2001how do i cancel and sql query running through stored procedure
which is called from the front end.
please help me
ADVERTISEMENT
SQL Server 2012 :: How To Cancel A Query If A Condition Is Not Met
Apr 23, 2015Is it possible to stop a query from running if a condition is not met?
I have a stored procedure that returns some email addresses. A condition is that a load of new data should have happened in the current month.
If a load of new data hasn't happened I want the stored procedure to stop and return an error message instead of returning the email addresses.
I have a variable that finds the maximum data load date and I thought I could use an IF... ELSE... to check if new data had been loaded. Like this:
DECLARE @MaxLoadDate as date = (select max(load_date)
from #table)
IF @MaxLoadDate<Dateadd(month, Datediff(month, 0, Getdate()), 0) --First Day of Current Month
<Something here to kill the query>
ELSE
SELECT email_address
FROM... etc
I've tried a couple of things like PRINT 'Error', and SET NO EXEC ON, but the query seems to happily carry on past the IF condition and return the email addresses. I know that data hasn't been loaded this month, so it should fail.
Front Page 2002 And SQL Query
Jul 23, 2005I am using a very basic query in Front Page 2002 against a SQL table inSQL 2000SELECT * FROM tablename WHERE (f_docnumber = ::f_docnumber::)and f_docnumber is a search form field.When I run I getDescription: The precision is invalid.Number: -2147467259 (0x80004005)The field is defined in the table as numberic 9(10,0)Any ideas?
View 1 Replies View RelatedSDS Selecting Even Though I Cancel
Sep 5, 2006Hello,I have a gridview bound to a sqldatasource control. I have an emptydatatemplate setup. In the selecting event, I make sure that an actual select has been performed (and not on null data); however, I have cancelselectonnullparameters set to true to stop it, because initially it will be null.However, the selecting event runs, even when I cancel it, the emptydatatemplate shows up. How do I prevent that from occuring?
View 2 Replies View RelatedCancel Rollback
Sep 21, 2007I have canceled a update statement that was running against a very large table.
Now it is attempting to rollback all of the changes. Is there any way to cancel this?
The table contains test data I would just like to drop it and recreate it, however I am getting an error when I attempt to drop the table because it is attempting a rollback.
How To Kill A Long Running Query Running On A Background Thread.
Sep 1, 2006
If I start a long running query running on a background thread is there a way to abort the query so that it does not continue running on SQL server?
The query would be running on SQL Server 2005 from a Windows form application using the Background worker component. So the query would have been started from the background workers DoWork event using ado.net. If the user clicks an abort button in the UI I would want the query to die so that it does not continue to use sql server resources.
Is there a way to do this?
Thanks
How To Cancel A Processing Request?
Jun 5, 2007Hello ,
I've execute a wrong sql request from an ETL. This request is inserting lots of rows in a table. I want to cancel that process, is it possible to do this? If yes, how can I cancel that request?
Thanks,
How To I Disable The Cancel Button During Installation
Nov 9, 2007I am running SQLEXPR.EXE with an ini setup file from a command line so it installs automatically.
I tried specifying the /qb! on the command line so that the Cancel button gets disabled during the automatic installation, but it doesn't work.
Here is a command line that works:
SQLEXPR.EXE /qb /settings "C:SQLMySetup.ini"
Here is the command line I tried to use to disbale the Cancel button, but didn't work:
SQLEXPR.EXE /qb! /settings "C:SQLMySetup.ini"
Anyone know how I can make this work?
Cancel Synchronization = Database Corruption? Identity Ranges Problem
May 30, 2008Hi all,
I have a SQL Server 2005 Compact Edition database that synchronizes with a SQL Server 2005 Standard database via merge replication.
The problem I have is when I cancel a synchronization, the database is left in such a state that I cannot add any new records. I dug around a bit and have found that in the INFORMATION_SCHEMA.COLUMNS view, AUTOINC_MAX has been incorrectly set to the same value as AUTOINC_MIN for the primary keys, which explains the 'out of range' error I get in my program when running off such a database.
In contrast, a non-corrupted database has AUTOINC_MAX set to AUTOINC_MIN + 999, presumably because of my subscriber identity range of 1000.
If this is the only thing that has gone wrong, all I need to do is programmatically set the AUTOINC_MAX values to AUTOINC_MIN + 999, however I can't find out where to do this (and INFORMATION_SCHEMA.COLUMNS is a view so it can't be updated obviously.)
I have also heard that 'compacting' the database may help, but I don't know how to do this either!
Any help would be immensely appreciated!
Regards,
Jonathan.
Re-display Result Set Without Re-running Query In Query Analyzer?
Apr 9, 2006I hope I am not asking about something that has been done before, but Ihave searched and cannot find an answer. What I am trying to do is torun a query, and then perform some logic on the rowcount and thenpossibly display the result of the query. I know it can be done withADO, but I need to do it in Query Analyzer. The query looks like this:select Varfrom DBwhere SomeCriteriaif @@Rowcount = 0select 'n/a'else if @@Rowcount = 1select -- this is the part where I need to redisplay the resultfrom the above queryelse if @@Rowcount > 1-- do something elseThe reason that I want to do it without re-running the query is that Iwant to minimize impact on the DB, and the reason that I can't useanother program is that I do not have a develpment environment where Ineed to run the queries. I would select the data into a temp table, butagain, I am concerned about impacting the DB. Any suggestions would begreatly appreciated. I am really hoping there is something as simple as@@resultset, or something to that effect.
View 6 Replies View RelatedSQL Server Admin 2014 :: Does Security-admin Role Plus Deny Alter Any Login Cancel Each Other Out
Aug 27, 2015I want to set up a database role so that users can use sp_readerrorlog through SSMS. It does a check on membership in the securityadmin role.
I have tested it and can see you can grant execute on xp_readerrorlog but the SSMS GUI uses sp_readerrorlog.
I thought I could create a user/certificate and add the signature to sp_readerrorlog but it's not permitted (likely because it's not a normal database object).
So the other solution is to add the users to the securityadmin role but then explicitly deny alter any login (best done with a custom server role in 2012+ but otherwise just manually in 2008). I tested this out and it works, I'm not able to alter any logins or increase my own permissions, I also did a check of what's reported from fn_my_permissions(null, null) and it shows minimal permissions like I'd expect.
Very Slow Running Update Query Query
Nov 19, 2004I have an update query running which to just now has been running for 22 hours running on two tables 1 a lookuptable that has just been created within the batch the other a denormalised table for doing data analysis on
the query thats causing teh problem is
--//////////////////////////////////// this is the one thats running
Print 'Update Provider 04-05 EmAdmsCount12mths : ' + CAST(GETDATE() AS varchar)
GO
Update Provider_APC_2004_05
set EmAdmsCount12mths =
(Select COUNT(*)-1
from Combined_Admissions
where ((Combined_Admissions.NHSNumber = Provider_APC_2004_05.NHSNumber) or
(Combined_Admissions.PASNUMBER = Provider_APC_2004_05.PDDISTNO)) and
(Combined_Admissions.AdmDate BETWEEN DateAdd(yyyy,-1,Provider_APC_2004_05.AdmDate) AND Provider_APC_2004_05.AdmDate) AND
Combined_Admissions.AdmMethod like 'Emergency%')-- and
-- CA.NHSorPrivate = 'NHS'))
FROM Provider_APC_2004_05, Combined_Admissions
any help in improving speed would be most welcome as there are 3 more of these updates to run right after this one and the analysis tables are almost double the size of this one
Dave
Running Query After Query And Input Variables
Jul 8, 2013I have 2 requests for desperate Hélio..
1) is there any way to run a query over a query without having to create a table with the results of the first query? (would drop table work? If so, how?
2) how can i define input variables the same way i do in excel? I am trying to run a couple of simulations based on 2 core inputs (in excel i would just do a data table)
Help Running A Query Please
Apr 10, 2008Hi guys. I'm looking for help to run a query that should come out looking like this
unit reports_to
Development Dept Representative Div
Systems Group Development Dept
Design Section Systems Group
Production Spec Section Systems Group
Proposal Section Systems Group
This is the table i have to work from
UNITNOORGNAME PARENTBUDGET
2000Representative Div1000459000.0000
2100Development Dept2000391000.0000
2110Systems Group 2100332000.0000
2111Proposal Section211087000.0000
2112Design Section 2110132000.0000
2115Production Spec Sect211068000.0000
I can't see any way of doing this query though I know the PARENT is the reports_to column and that the UNITNO is the Department but can't find any way to run the query. Hoping you guys can help
Thanks
Re-Running Query
Jun 20, 2007Presumably, an RDL data set is only queried once before generating a report. And presumably, this is true even if the data set feeds a list control. However, I'd like to know if I can cause a data set to be queried repeatedly from a list control. I need to do this, because the data set contains aggregate functions that would be impacted by each "pass" the list control would make.
Is it possible to make a data set queried repeatedly in this fashion?
Long Running Query - Only From .NET
Aug 22, 2007I have a pretty complex query that aggregates lots of data and inserts multiple rows of that data into a reporting table. When I call this SPROC from SQL Server Management Studio, it executes in under 3 seconds. When I try to execute the same SPROC using .NET's SqlCommand object the query runs indefinitely until the CommandTimeout is reached. Why would this SPROC behave differently with the same inputs, but being called from .NET? Thanks for your help!
View 3 Replies View RelatedWhy Is The Query Running For So Long?
Feb 7, 2003When I execute the following stored procedure it runs for about a minute.
CREATE PROCEDURE EquipmentListByProduct
(
@iProdTypeId int
)
AS
SET NOCOUNT ON
DECLARE@iError int, @iRows int
SELECT pn.prodTypeId, pn.prodId, pn.prodName
FROM prodNames pn
WHERE pn.prodTypeId = @iProdTypeId
SELECT@iError = @@ERROR, @iRows = @@ROWCOUNT
IF ( @iError <> 0 )
BEGIN
RETURN@iError
END
IF ( @iRows = 0 )
BEGIN
RETURN-1
END
RETURN@iError
GO
The table only has 22 records.
Do I need to index the table? If so how do I do this?
SQL Query Running Much Slower Than EM
Jun 12, 2002Ok,
here's a funky one That I can't find an expanation for. If I go into EM and choose a table from a database and return all rows, I get immediate results and can start browsing records. If I go into query analyzer and do a select * on the same table, it takes up to 20-25 minutes to return the result set. This used to only take like 5 mins. What gives? Anyone seen this before?
Running Query From Two Sql Sever
Aug 24, 2004Hi Everybody,
I have two SQL server one in the office and other on remote location. I have some data on SQL in the office and some data on remote location and need to query the data.
how can I do that ?
Thanks for your help in advacne
Error While Running Query
Mar 2, 2004Hi,
SQL Server 7
When i ran a query in query analyzer i am getting the below error.
once i closed and opened the query analyzer and ran the same query it worked fine.
pls the error which i got in first time.
Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
Pls help me in this
TIA
Adil
Query Running On A Schedule
Apr 29, 2008Can someone please let me know how i can set up a query to execute once a week lets say on tuesdays at 6 am...
i do not see how i can set this. can anyone help me please
Query Analyser Not Running
Mar 18, 2006Hi
I am install sql 2000, Server is running properly
but query analyer is not working...
Thanks
ASM
Running Query On All Databases Within An SQL
Oct 3, 2007Hi,
I'm running SQL 2000 SP4.
On this server I have a few databases. I need to run the below query against each database. Since the server has approx 50 databases this will take time.
Is there any way for me to modify this so as it will automatically
run against each database one at a time and then create a single output file with all the results.
I do not want it to run against all of the databases at the same time as it will kill my server so it must run and gather results on each database at a time.
QUERY to be run
SELECT RelativeFileName
FROM Collection, Saveset
WHERE Collection.CollectionIdentity = Saveset.CollectionIdentity
Running A Query On Two Databases
Mar 31, 2008Hello all,
Can anyone please tell me what query to use for joining two tables in two databases together?
Basically, we have two databases called 'system' and 'site' respectively. The 'system' database has a table called 'users' and each user has a unique id which is also linked to the tables in the 'site' database.
The only problem i have got is, I want to be able to get the actual user names not the unique id and the only way to get this from my SQL statement is to be able to link the uniqueid for each user in the 'site' database to their corresponding uniqueid in the 'system' database.
Please, how can I do this?
Running A DLL In The Query Analyzer
Nov 23, 2007Hi,I have a DLL that I want to run from the Query Analyzer. I tried thefollowing:USE master;EXEC sp_addextendedproc BLAH, '\Other-ServerPathToBlahBlah.dll'and I get the error:ODBC: Msg 0, Level 16, State 1Cannot load the DLL \Other-ServerPathToBlahBlah.dll, or one ofthe DLLs it references. Reason: 126(The specified module could not befound.).The DLL was written in Cobol. The "Other-Server" in the Path above isthe server that Cobol (and the DLL) is located on.I looked at the dependencies for the DLL and it includes (notsurprisingly) Cobol Dll's. It should find those on the other server.What can I do?Thanks!
View 5 Replies View RelatedError While Running A Query
Dec 12, 2007I have recieved the following error message while running a query on SQL2k5 on a Windows 2003 64-bit EE server
"The operating system returned error 1450(error not found) to SQL Server during a write at offset 0x00001c32062000 "
I will be grateful if anyone can point me in the right direction on what this can be.
Thanks
Long Running Query
Jun 2, 2006Hi,
I'm trying to optimize a long running (several hours) query. This query is a cross join on two tables. Table 1 has 3 fields - ROWID, LAt and Long. Table 2 has Name, Addr1,Addr2,City,State,Zip,Lat,Long.
Both tables has LatRad - Lat in radians, LonRad- Lon in Radians. Sin and Cos values of Lat and Lon are calulated and stored to be used in the distance formula.
What I'm trying to do here is find the nearest dealer (Table 2) for each of Table 1 rows. The Select statement takes a long time to execute as there are about 19 million recs on table 1 and 1250 rows in table 2. I ran into Log issues- filling the transaction log, so I'm currently using table variables and split up the process into 100000 recs at a time. I cross join and calculate the distance (@DistValues) and then find the minimum distance (tablevar2) for each rowid and then the result is inserted into another Table (ResultTable).
My Code looks like this:
Declare @DistValues table (DataSeqno varchar(10),Lat2 numeric(20,6),Lon2 numeric(20,6),StoreNo varchar(60), Lat1 numeric(20,6),Long1 numeric(20,6),Distance numeric(20,15))
Declare @MinDistance table (DataSeqno varchar(10) primary key,distance numeric(20,15))
Insert into @DistValues
Select DataSeqno,T.Lat Lat2,T.Lon Lon2,S.StoreNo,S.Lat Lat1,S.Long Long1,
distance=3963.1*Case when cast(S.SinLat * T.SinLat + S.CosLat * T.cosLat * cos(T.Lonrad - s.Lonrad) as numeric(20,15)) not between -1.0 and 1.0 then 0.0 else acos(cast(S.SinLat * T.SinLat + S.CosLat * T.cosLat * cos(T.Lonrad - s.Lonrad) as numeric(20,15))) end
from dbo.TopNForProcess T , dbo.Table2 S where Isnull(T.Lat,0) <> 0 and Isnull(T.Lon,0)<> 0
Insert into @MinDistance
Select DataSeqno,Min(distance) From @DistValues Group by DataSeqno
Insert into ResultTable (DataSeqno,Lat2,Lon2,StoreNo,LAt1,Long1,distance)
Select D.DataSeqno, D.Lat2, D.Lon2, D.StoreNo, D.LAt1, D.Long1, M.distance from @DistValues D Inner Join @MinDistance M on D.DataSeqno = M.DataSeqno and D.Distance = M.Distance
I created a View called TopNForProcess which looks like this. This cut down the processing time compared to when I had this as the Subquery.
SELECT TOP (100000) DataSeqno, lat, Lon, LatRad, LonRad, SinLat, cosLat, SinLon, CosLon FROM Table1 WHERE (DataSeqno NOT IN (SELECT DataSeqno FROM dbo.ResultTable)) AND (ISNULL(lat, 0) <> 0) AND (ISNULL(Lon, 0) <> 0)
I have indexes on table table1 - Rowid and another one with Lat and lon. Table2 - Lat and Long.
Is there any way this can be optimized/improved? This is already in a stored procedure.
Thanks in advance.
Running Sums Query
Oct 18, 2007I am trying to write a query that gets daily sales for each of our stores plus WTD and MTD totals
columns would be
Store date daily_total wtd_total mtd_total
the query need to produce a row per store per day and have the wtd sum reset for each week so that it
sums up sales day by day for that week
Is there a good way to do this?
Query Running Slow
Aug 24, 2007hi
if suppose one query is running slow than what steps we can follow to optimize it...
this question is asked me in interview.
thanx
Running Query Problem
Sep 20, 2007
Hi,
I have a query that has cursor loop.
in each loop there is many sql update commands.
it runs good in sql2000.
now when i run it in sql2005 it continue for a long time and not finish.
when i run each command that within the loop alone it runs good, but when i run it all together its not finish running.
i dont get any error. i think maybe the table that i'm bulk updating is in some lock and this is why it stuck in the running and not finish.
Is there a way to make sure that there is no lock on a table before i update it during my running.
Thanks.
Automatically Running Sql Query Every Week
Aug 14, 2007I have a simple query (a select statement which retrieves results from 2 tables via join). I run this query every week and just copy the results from Management Studio (Ctrl-A) and then open Microsoft Excel and just paste it there.
Is there a way I can automatically run this every week and generate the Excel from the results? If so what steps I have to do?
I use SQL Server 2005 Express Edition.
Running An Insert Query Using A Button
Jan 22, 2008Hey, I have created a webpage using visual web developer and i want to use it as a frontend to a database. I want to be able to insert a new line into a table using a drop down menus then a 'submit' button. How do I get the submit button to run the following sql query?
insert into master_training_table (user_rec_no,Course_rec_no,Planned_date,Inserted_date) select @user_rec_no,id_training,convert(smalldatetime,convert(varchar(12),getdate()))+planned_date,getdate() from tbl_training tb join tbl_user_groups tg on tb.groups_id = tg.groups_id where tg.groups_id = @groups_id
thanks for your help
Running Query For Linked Server
May 23, 2001I have created a linked server using an ODBC connection to an Access database. The command I used for this was:
EXEC sp_addlinkedserver
@server = 'Testaccess',
@srvproduct = '',
@provider = 'MSDASQL',
@datasrc = 'test'
GO
where 'Testaccess' is the name of the linked server and 'test' is the name of the ODBC connection. [The ODBC connection stores the name of the Access datbase.]
I can run sp_tables_ex and view the table_schem, table_cat etc etc
BUT when I try to run a query on the linked server, I get the following message:
"7312 - Invalid use of schema and/or catalog for OLE DB provider '%ls'. A four-part name was supplied, but the provider does not expose the necessary interfaces to use a catalog and/or schema."
I am attempting/using the following command specifying the linked server name.database name.owner.table name in the FROM clause:
select a.*
from testaccess.testdb.dbo.temptable a
Any ideas what I am doing wrong??
thanks
Jan