hi everyone:
the report show two tables two matrixs
how can i control the distance between them
I want to set the same distance between the table and matrix
or (table and table )
Hi All,
I am placing a Matrix inside the table control for grouping requirements,but when we export the report to the Excel, the contents inside the table cell are ignored. Is there any way to get the full report exported, as per the Requirement.Please help me with this issue.
With Thanks
M.Mahendra
All,
Is it possible to Group data in a Matrix exactly similar to Table Control. For example, my table control would group data as follows:
Region Country City $ales
North America
USA
Chicago 4 MM
LA 10 MM
NYK 6 MM
Canada
Toronto 4 MM
while the matrix would display as:
North America USA Chicago 4MM
LA
NYK
Canada Toronto ...
Do you see the problem? The matrix is starting the subgroup at the same level as the parent group. How do I make a sub group start at the row below the parent group row in matrix just like in the table above?
Hi all,
I'm using matrix control as my reporting tools.
But i found one trouble, how can i do my matrix become like this.
Product A
Product B
Customer
Price
Qty
Price
Qty
Customer A
10
10
140
160
Customer B
12
120
120
160
Customer C
10
10
110
140
The price and qty is the static column, and i would like to make the static row also. (show in red color) but i can't.
Please help...
Thanks
Kendy
Hi all,
Can the matrix configure to show total rows and total columns? If yes, how?
Regards,
Farouk Yew
Just wondering when is it preferred to use Matrix control as opposed to a table? Also, on a related note, can a table control be used for displaying information from one data set or could information coming from multiple data sets be bound to a single table in such a way that there could be logically different sections within the same table?
Thanks.
Hi there.
I am creating a report that the requirements need different background colors based on the row or column as shown below:
Community
Total # of Respondents
Resident's Overall Satisfaction Rating
Quality of Repair
May '07
41
3.6
5.0
April '07
14
1.8
3.0
Q2 '07
55
2.7
4.0
March '07
36
3.6
3.0
February '07
28
4.0
1.2
January '07
22
2.2
4.0
Q1 '07
86
3.3
2.7
YTD '07
141
3.0
3.2
December '06
33
3.8
4.2
November '06
27
2.6
5.0
October '06
42
1.8
3.0
Q4 '06
102
2.7
4.1
September '06
58
4.0
2.2
August '06
84
2.0
1.6
July '06
52
3.2
3.4
Q3 '06
194
3.1
2.4
June '06
40
2.4
4.2
May '06
41
3.6
5.0
April '06
14
1.8
3.0
Q2 '06
95
2.6
4.1
March '06
67
N/A
3.8
February '06
38
N/A
2.8
January '06
N/A
3.8
N/A
Q1 '06
105
3.8
3.3
YTD '06
496
2.9
3.5
Rolling 12 Month Average
477
2.9
3.3'
I can get the row colors to work great with an expression, but when I try to add the gray column with conditional formatting for the Resident's Overall Satisfaction Rating question, it clobbers my row formatting. I am thinking that I will have to do some gnarly expression in each of the rows and columns using the InScope function. Does that sound about right, or is there an easier way?
Thanks, Mike
All,
I am able to display the data in matrix, however I need to place it next to a table report item, so that the rows in table and matrix together would represent the data for same entity. In order to accomplish that, the Matrix rows need to be properly aligned with Table rows. But thats not happening. For some reason, in the Layout view they align properly, but when I Preview the report, the rows are not aligned. I have checked the cell sizes of both in the properties, they are both identical. So, I am very surprised why the Matrix row size is growing less than Table row size when the report is generated. Any ideas how to fix this?
Thanks.
Hello All,
In my report, I have a Matrix control placed next to a table. It renders properly and displays data aligned in two controls in Visual Studio Preview. However, when I deploy to production, it wraps the matrix control below the table, in fact puts the entire matrix control underneath the table. Why such strange behavior and not in the Preview of the report but only in Production? Any ideas how to fix this?
In VS Env. Preview --> [Table][Matrix]
In Report Svr Prod --> [Table]
[Matrix]
Thanks,
When I created a Table control, I was able to read things like .Color, FormattedValue, etc. from SSAS. This was great, because I could control all existing and future reports' formatting via one change in the cube.
Now, I've decided that a Matrix control is superior for various reasons. However, I notice that I MUST apply an aggregate function to get a cell value...well, it appears that this means there's no longer any way for me to read my SSAS formatting.
I tried =First(Fields!DataValue.FormattedValue), =Max(...), etc.
I also tried it with the color property, etc. Nothing worked.
Are there any workarounds? I'd hate to embed the formatting into each of my 40 reports, because the user is likely to change his/her mind after the fact.
Thank you,
Bert
Hi all
I have taken Marix control in my report,But i am unable to increse Rows and cols.
How can i make it?
Reagards.
I have deleted the entry
<RenderingExtension>HTMLOWC</RenderingExtension>
from the rsreportserver.config file
but I still can't see HTML OWC in the export drop down.
what else do I need to do?
I need to design a report like as below
Location jan feb mar april total %
abc 1 2 1 1 5 % calculated value
ddd 1 1 1 1 4 % calcualtedvalue
------------------------------------------------------------------------------------------------------
total 2 3 2 2 9 total(%calculated value)
i was able to get everything except last column. i am using Matrix control. can any one help me how to another column after sub total in matrix control.
hii
Everybody
In my report i have a matrix,but i want to show only 10 columns in one page and rest of the data should come in next page?
so is there anyway to control the number of columns in a matrix to be shown in the priview?
please help me with some suggestions.
its orgent
thanks in advance
Mahasweta
I have a matrix report:
My Expression in the data fields inside design mode is:
IIF(Fields!Row_num.Value mod 2 ,"White","LightGrey")
I am using a Dense rank Function at the dataset level in order to group id column wise. So Fields!Row_num.Value comes from that set.
Earlier it was BLANK values: Please see below for reference.
Tried IsNull on SQL Server already and does not work because there are no NULLs in the data I am retrieving. The empty cells happen when the matrix creates the crosstab report - where there is no data for a column. Everything else works well except the BLANK values being not colored as you see in the screen shot, im using ISNOTHING function to achieve those 0's if NULLS inside the report. But though we have a value inside the cell coming from report it does not colour the entire group.
My requirement is coloring the entire column group irrespective of the NULLs' or Blanks.
Have also tries several functions, but of no use. I am missing with a tiny thing I guess which I am unable to figure out.
Other Functions Tried:
=IIF(VAL(ReportItems!ROWCOLOR.Value) MOD 2,"WHITE","LightGrey")
=iif(RunningValue(Fields!City.Value,CountDistinct,Nothing) Mod 2, "LIGHTBLUE", "SILVER")
=iif(RunningValue(Fields!DQLogDateTime.Value,CountDistinct, Nothing) MOD 2, "LightGrey","White")
I was hoping someone could help out with this issue....I've got a report I created in Reporting Services 2000 SP2 where I am nesting table elements within the row and detail sections of the matrix. This allows me to have multiple items within my "row" data with column headings, and works perfectly fine within the designer, and viewer, and whenever I export it to any format other than Excel. Exporting to excel results in a "Specified cast is not valid" error.
To me this seems to be a bug in the Excel rendering extension, since it seems to be supported in RDL. Has anyone else run into this? Is there a fix to the renderer or a workaround that anyone is aware of?
I'd be happy to post the RDL if anyone is interested.
Thanks,
Casey
Hey Everyone,
I am trying to create a table that will list data for me. The problem that I have is that my data has been separated across multiple stored procedures. The way I want to display the items are as follows:
title1 title2 title3 title4 title5 title6 title7
item1 item2 item3a item4 item5 item6a item7
item3b item6b
item3c item6c
As you can see, items3 & 6 contain significantly more rows than the others. In order to prevent duplicating items1, 2, 4, 5, and 7, I had to split the statement up into 3 stored procedures; all three procedures take parameters, item 3 and 6 taking item1 as a parameter. How will I display data like that in a report? In the design view, I am only able to use 1 dataset, let alone link them up together.
If this cannot be done, is there a query that I can perform that will omit repeated items? Basically, it will look exactly like about. I thought it was the GROUP BY, but I was way off.
Hi
How do I get a nearest distance of a point? For example, I have two tables A and B and I want to find the nearest distance between the records of the two tables. In addition, one of the tables should also give me the distance. The data I have geo spatial data. Can this be done in SQL
Help will be appreciated
Is there a recommended practice for mirroring in regards to distance? Is it best practice to mirror with both nodes at the same physical location and use another method for failing over to a remote location or can one just put the other node in the mirror a few thousand miles away? I'm suspecting not.
Any comments??
Hi,
please, it is possible to know the edit distance used in the fuzzy lookup/grouping.
On this forum I read fuzzy lookup use 4-gram with fix size.
Does exist any document explaining how fuzzy lookup calculate the similarity? In other word, what kind of edit distance, algorithm is used by fuzzy lookup/grouping?
I hope I was enough clear with my poor english.
Thanks All
I'm trying to run a dyncamic query that returns all records within a specific distance of a certain point. The longitude and latitude of each record is stored in the database. The query is constructed from two dynamic variables $StartLatitude and $StartLongitude with represent the starting point.
SELECT UserID, ACOS(SIN($StartLatitude * PI() / 180) * SIN(Latitude * PI() / 180) + COS($StartLatitude * PI() / 180) * COS(Latitude * PI() / 180) * COS(($StartLongitude - Longitude) * PI() / 180)) * 180 / PI() * 60 * 1.1515 AS Distance
FROM HPN_Painters
HAVING (Distance <= 150)
It runs fine until I add the 'HAVING (Distance <= 150)' clause, in which I recieve the error: Invalid column name 'Distance' It seems that Distance cannot be referenced in the HAVING clause.
I'm looking to find out how I'd go about setting up a database where avisitor to my site could punch in their postal code, and find out how farthey are from another postal code. For example, AutoTrader has this featureI believe to tell you how far the vehicle is from you. Dating sites havethem so you can do proximity searches.Anyone have any ideas where I could start? I'm thinking the post office,but if anyone else has suggestions, I'm open to hear them.Thanks!
View 4 Replies View RelatedVarious posts have noted that mirroring over distance is not advisable or that either async connections should be used.
Are there any limits/recommendations i.e. if two datacenters are a couple of files part with 10GBs fibre links and <50ms response times would this be acceptable for high-availability mirroring?
I am new to data mining so please excuse my ignorance. Lets assume
- i have created a cluser model
- identified 3 clusters ( a, b, c)
- each record consists of 15 columns
- collecting new records( 15 variables) real time
what i would like to do is plot these new records programmatically as i collect them realtime. I assume this new record will belong to one of these three clusters. I believe we can find the cluster this new record belongs to by ' SELECT Cluster()....' and distance from the center of the cluster by ClusterDistance(). To plot this on a 2-dimentional space i need (x, y).
ClusterDistance() could be Y but what will be X.
thanks.
I have a user defined function, I want to determine the distance between the 2 points. I have it working but i'm having a problem getting to print.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Code Snippetcreate function dbo.Distance( @lat1 float , @long1 float , @lat2 float , @long2 float)
returns float
as
begin
declare @DegToRad as float
declare @Ans as float
declare @Miles as float
set @DegToRad = 57.29577951
set @Ans = 0
set @Miles = 0
if @lat1 is null or @lat1 = 0 or @long1 is null or @long1 = 0 or @lat2 is
null or @lat2 = 0 or @long2 is null or @long2 = 0
begin
return ( @Miles )
end
set @Ans = SIN(@lat1 / @DegToRad) * SIN(@lat2 / @DegToRad) + COS(@lat1 / @DegToRad ) * COS( @lat2 / @DegToRad ) * COS(ABS(@long2 - @long1 )/@DegToRad)
set @Miles = 3959 * ATAN(SQRT(1 - SQUARE(@Ans)) / @Ans)
set @Miles = CEILING(@Miles)
return ( @Miles )
end
DECLARE @RC float
EXEC Distance '39.943762', '-78.122265', '32.334709', '-96.633546'
PRINT @RC /* in miles */
hi all,
i wonder if could accomplish this problem in sql..
say i wanna total sum up some qty in table 1, and the sum up qty appear in table 2.. means everytime qty in table 1 change, it will sum up automatically total qty in tbl1 :-
table 1
id qty
1 5
2 5
2 5
1 5
table 2
id SumQty
1 10
2 10
note: table 2 will sum up automatically, isit possible to do this?
Hi Friends,
I am working on a sport site, where i have to create a Calender Like
thing where i have to show which sport is avaible in which month,
we can have any numbers of sports as the club grow it can add 100s of
different sport to itself, so i was not able to understand how to make
a database for this kind of thing, can anyone please help
Games - Jan Feb Mar Apr May Jun Jul …..Dec
Cricket
Yes Yes
Yes No
No No
No .....
Hockey No
Yes Yes
No No
Yes Yes .....
Horse R
Yes No
No No
Yes Yes
Yes .....
Thanks in Advance
Regards
Viking
Is it possible to use table instead of a matrix to achieve similar functionality? Would that require creating a pivot table in SQL query?
View 14 Replies View Related
SK Qty
%
SKU Qty
%
A
AA
Item 1
2
2/4
Item 2
1
1/4
Item 3
1
1/4
AA Total:
4
4/ 10
AB
Item 1
2
2/6
Item 4
3
1/6
Item 5
1
1/6
AB Total:
6
6/10
A Total:
10
10 / 25
B
BA
Item 6
2
Item 7
2
Item 9
3
BA Total:
6
BB
Item 10
2
Item 11
3
Item 13
4
BB Total:
9
B Total:
15
Total:
25
25/25
=======================================================================================
I have a matrix table above, a "%" value is needed to present in the "%" column. But i can't get those value in red color in every row accordingly.
Pls help and thanks so much in advance!
Great Circle distance calculation
Is there any stored procedure or application that implements Great Circle distance calculation
DECLARE @Latitude NUMERIC(9, 6), @Longitude NUMERIC(9, 6)
DECLARE @MyLatitude NUMERIC(9, 6), @MyLongitude NUMERIC(9, 6)
Set @Latitude = 42.329596;
Set @Longitude = -83.709286;
Set @MyLatitude = 42.430883;
Set @MyLongitude = -82.923642;
Question: How do we calculate the distance in miles between the 2 points.
I am trying to write a piece of SQL which gives me a list of enquiries within 10 metre distance of a enquiry.
The idea is to identify possible duplicates.
Table: enquiry
Primary key: enquiry_number
Co-ordinates data fields: enquiry.enquiry_easting and enquiry.enquiry_northing.
I will need to self-search on the same table to find possible enquiries within 10m distance.
See here www.merriampark.com/ld.htm for information about the algorithm. This page has a link (http://www.merriampark.com/ldtsql.htm) to a T-SQL implementation by Joseph Gama: unfortunately, that function doesn't work. There is a debugged version in the also-referenced package of TSQL functions (http://www.planet-source-code.com/vb/scripts/ShowCode.asp?txtCodeId=502&lngWId=5), but this still has the fundamental problem that it only works on pairs of strings up to 49 characters.
CREATE FUNCTION edit_distance(@s1 nvarchar(3999), @s2 nvarchar(3999))
RETURNS int
AS
BEGIN
DECLARE @s1_len int, @s2_len int, @i int, @j int, @s1_char nchar, @c int, @c_temp int,
@cv0 varbinary(8000), @cv1 varbinary(8000)
SELECT @s1_len = LEN(@s1), @s2_len = LEN(@s2), @cv1 = 0x0000, @j = 1, @i = 1, @c = 0
WHILE @j <= @s2_len
SELECT @cv1 = @cv1 + CAST(@j AS binary(2)), @j = @j + 1
WHILE @i <= @s1_len
BEGIN
SELECT @s1_char = SUBSTRING(@s1, @i, 1), @c = @i, @cv0 = CAST(@i AS binary(2)), @j = 1
WHILE @j <= @s2_len
BEGIN
SET @c = @c + 1
SET @c_temp = CAST(SUBSTRING(@cv1, @j+@j-1, 2) AS int) +
CASE WHEN @s1_char = SUBSTRING(@s2, @j, 1) THEN 0 ELSE 1 END
IF @c > @c_temp SET @c = @c_temp
SET @c_temp = CAST(SUBSTRING(@cv1, @j+@j+1, 2) AS int)+1
IF @c > @c_temp SET @c = @c_temp
SELECT @cv0 = @cv0 + CAST(@c AS binary(2)), @j = @j + 1
END
SELECT @cv1 = @cv0, @i = @i + 1
END
RETURN @c
END