Hiya
I'm trying to run the below but getting errors on the convert statement, can anyone point me in the right direction?
exec PurgeRevisionsByDate convert(datetime,'01/01/2005',103)
Error message
Server: Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'convert'.
Thanks
Bav
OK Here is what I am trying to do... In one of my processes I need to take a field IE CREATE_DATE and change that from an EPOCH (number of seconds since Jan 1, 1970) to a human readable date... IE a 04/02/2008 08:23:36 AM and stuff... Now I do know how to use the dateadd... However all my times are coming up as GMT I need them to be EST/EDT... How can I script this to automagically subject 5 or 4 from the hour depending on if we are in daylight savings. This has been plagueing me for the longest time.
Thank you all for any help you can give.
Hello,I am receiving a text file that is produced from a mainframe that isout of my control. I am attempting to find a (hopefully clean) way toimport it into a SQL Server database in an automated fashion. I amnot really concerned about how many tables it requires or what theschema looks like as long as the data remains related and ends up inits respective fields (I will probably use scratch tables for this).The data is given to me in a format that is meant to be printed outand read by human eyes (in a text file). The format looks somethinglike this:Begin File:-------------------------------------------------------------------------------1234 1234 1234 1234 XYZ Company 01/01/2003.......More stuff related to XYZ company for a couple of lines ..............(this stuff can easily be parsed by position).......MCARD VISA AMEX DISC-------------------------------------------------------------------------------TOTAL 11111.11 4444.44 5555.55 30.01TRANS FEE .20 .20 .15 .15TRANS AMOUNT 2222.22 888.89 833.33 4.50DISC .0165 .0165 .0365 .0355-------------------------------------------------------------------------------ANOTHER HEADER............More stuff related to XYZ Company................End File:Well, this isn't the exact format, but just an example. The point isthat all of the data in each column is related and should end up inthe same record which is related to the parent record of XYZ Company(or all in a single record in a single table if that is the closest Ican get).Also, the rows are not always present. For example, if TRANS FEEdoesn't apply to anything in the row, then the entire row willcollapse and TRANS AMOUNT would be the next line after TOTAL.I was looking at the bcp utility and dts, but dts doesn't seem to havethe performance capabilities (or reliability for that matter) I amlooking for. Bcp seems like it might work if there is some advancedformatting commands that I can't find in the documentation - Anyone?The best I can come up with is to use a high level language such as C#or VB.NET to parse the text file into another text file that is commadelimited, and then use the bcp utility (or bulk insert) to import itinto SQL Server where I can then use TSQL to manipulate it how I want.I am trying to eliminate the high level language parse and just gostraight from file to database. Does anybody know an easier route?TIA
View 1 Replies View RelatedUsing DTS package in 2000 version, I am dumping TXT file contents into SQL Table,
I have one column having date in format YYYYMMDD(20070929) and corresponding column in SQL is datetime, but it fails on data type mismatch.
I have no choice of making date column in SQL to string or Varchar etc,
is there any way to make that date column in SQL to convert the value upon transformation from format (YYYYMMDD) to M/DD/YYYY (9/29/2007).
many many thanks,
Hi,
I Have this simple convertion in a Script component
Dts.Variables("dateOfProcess").Value = CDate(lineMCF.Substring(30, 2) + "/" + lineMCF.Substring(28, 2) + "/" + lineMCF.Substring(24, 4))
this works fin in my development environment which has a spanish version of SQL Server and uses "DD/MM/YYYY" as date format.
but the production environment has an english version of SQL Server and "MM/DD/YYYY" date format, so the package crashes in this server.
How do I convert the string to date not depending on the SQL server language.
thanks.
I have a table in which a date value is stored as varchar.some of these values are stored ina dd/mm/yyyy format and other values are stored in a yyyy-mm-dd format..Now I wish to retrieve some data by querying between two dates. However I need to convert the varchar date value to datetime in order to do this but since the date value is in two different formats, the following doesn't work.
select date_value
from my_table
where CONVERT(DATETIME, date_value, 103) between @date1 and @date2
How can you convert the date value to datetime when its stored in mutiple formats. I can't change the table itself as I dont have admin privelages.
I'm using SQL 7.0 SP1.
I am using DTS to read in a date with the format of YYYYMMDD. I am trying to convert this date to MM/DD/YYYY and then use the CDate function with the following code to load it into a Datetime column in SQL Server:
Function Main()
strDate = DTSSource("Col002")
strYear = Left(strDate, 4)
strMonth = Mid(strDate, 5, 2)
strDay = Right(strDate, 2)
strHoldDate = strMonth + "/" + strDay + "/" + strYear
DTSDestination("DateName") = strHoldDate
Main = DTSTransformStat_OK
End Function
My DTS package will execute without errors, but it does not add the row. I have been successful using CDate when the source date is in the format MM/DD/YYYY.
Also, do you have any tips on how to debug DTS? How to see what's in a variable, etc.?
Thanks!
Lisa
In our ERP system we have a field which is a date-picker in the user front end, but the value is stored in an NVARCHAR field and not always consistently. How can I convert this to a date (preferably in the format YYYY-MM-DD HH:MM) that I could use in a calculation?
select code, spec_value from spec_checklist_remind where spec_checklist_id = 17
code spec_value
------------ -----------------------------------------------------------------------
05MC0001 22/07/2014
05MC0002 23/07/2014
06MT0001 01-May-2014
06MT0002 01-May-2014
06MT0006 01/05/2014
06MT0007 01-May-2014
06MT0008 01/05/2014
i have a sql statement that i created in code and it is sending a query to the database
when i dim the variable a datetime variable it says that it cant convert it
if i make the variable a varchar it works but it only returns one result when it should be returning about 10
here is the code
Public Function dbDGQSSearch(ByVal BatchID As String, ByVal CreatedBy As Integer, ByVal CreatedFor As Integer, ByVal DateCreatedMod As Integer, ByVal DateCreated As String, ByVal DateCompletedMod As Integer, ByVal DateCompleted As String, ByVal DateStartedMod As Integer, ByVal DateStarted As String, ByVal SearchType As Integer, ByVal Completed As Integer, ByVal PriorityMod As Integer, ByVal Priority As Integer, ByVal RemainingCallsMod As Integer, ByVal RemainingCalls As Integer, ByVal TotalCallsMod As Integer, ByVal TotalCalls As Integer, ByVal Bonus As Integer, ByVal Keyword1 As String, ByVal Keyword2 As String, ByVal Keyword3 As String, ByVal Keyword4 As String, ByVal Keyword5 As String)
Dim strQueSearch As String
strQueSearch = "SELECT tlkup_Rep.RepID, tlkup_Rep.PositionID, tlkup_Rep.RepFName, tlkup_Rep.RepLName, tlkup_Rep.RepPassword, tlkup_Rep.RepUserName, tlkup_Rep.RepFName + ' ' + tlkup_Rep.RepLName AS RepName, t_Que.QueID, t_Que.BatchID, t_Que.AdminID, t_Que.Manager, t_Que.BonusID, t_Que.QueCompleted, t_Que.QueDate, t_Que.QueNotes, t_Que.QuePriority, t_Que.QueQuantity, t_Que.QueStartDate, t_Que.Mail, t_Que.QueDateComplete, t_Que.QueTotal FROM t_Que INNER JOIN tlkup_Rep ON t_Que.Manager = tlkup_Rep.RepID AND t_Que.Manager = tlkup_Rep.RepID WHERE BatchID<>'' and BatchID<>'2' and BatchID<>'3' and BatchID<>'4' "
'Creates statement for selecting the add to batch data where the criteria appear
If BatchID <> "" Then
strQueSearch = strQueSearch + " and t_Que.BatchID= @BatchID "
End If
If CreatedBy > 1 Then
strQueSearch = strQueSearch + " and t_Que.RepID =@RepID "
End If
If CreatedFor > 1 Then
strQueSearch = strQueSearch + " and t_Que.Manager = @Manager "
End If
If DateCreated <> "" Then
If DateCreatedMod = 0 Then
'>
strQueSearch = strQueSearch + " and t_Que.QueDate >@QueDate "
ElseIf DateCreatedMod = 1 Then
'<
strQueSearch = strQueSearch + " and t_Que.QueDate <@QueDate "
ElseIf DateCreatedMod = 2 Then
'=
strQueSearch = strQueSearch + " and t_Que.QueDate =@QueDate "
End If
End If
If DateCompleted <> "" Then
If DateCompletedMod = 0 Then
'>
strQueSearch = strQueSearch + " and t_Que.QueDateComplete >@QueDateComplete "
ElseIf DateCompletedMod = 1 Then
'<
strQueSearch = strQueSearch + " and t_Que.QueDateComplete <@QueDateComplete and t_Que.QueDateComplete >'1/1/1900' "
ElseIf DateCompletedMod = 2 Then
'=
strQueSearch = strQueSearch + " and t_Que.QueDateComplete =@QueDateComplete "
End If
End If
If DateStarted <> "" Then
If DateStartedMod = 0 Then
'>
strQueSearch = strQueSearch + " and t_Que.QueStartDate >@QueStartDate "
ElseIf DateStartedMod = 1 Then
'<
strQueSearch = strQueSearch + " and t_Que.QueStartDate <@QueStartDate "
ElseIf DateStartedMod = 2 Then
'=
strQueSearch = strQueSearch + " and t_Que.QueStartDate =@QueStartDate "
End If
End If
If SearchType = 0 Then
'Both
'strQueSearch = strQueSearch + " and t_Que.Mail=0 and t_Que.Mail=1 "
ElseIf SearchType = 1 Then
'Mail
strQueSearch = strQueSearch + " and t_Que.Mail=1 "
ElseIf SearchType = 2 Then
'Phone
strQueSearch = strQueSearch + " and t_Que.Mail=0 "
End If
If Completed = 0 Then
'Both
'strQueSearch = strQueSearch + " and t_Que.Mail=0 and t_Que.Mail=1 "
ElseIf Completed = 1 Then
'Yes
strQueSearch = strQueSearch + " and t_Que.QueCompleted=1 "
ElseIf Completed = 2 Then
'No
strQueSearch = strQueSearch + " and t_Que.QueCompleted=0 "
End If
If Priority > 0 Then
If PriorityMod = 0 Then
'>
strQueSearch = strQueSearch + " and t_Que.QuePriority >@QuePriority "
ElseIf PriorityMod = 1 Then
'<
strQueSearch = strQueSearch + " and t_Que.QuePriority <@QuePriority "
ElseIf PriorityMod = 2 Then
'=
strQueSearch = strQueSearch + " and t_Que.QuePriority =@QuePriority "
End If
End If
If RemainingCalls > 0 Then
If RemainingCallsMod = 0 Then
'>
strQueSearch = strQueSearch + " and t_Que.QueQuantity >@QueQuantity "
ElseIf RemainingCallsMod = 1 Then
'<
strQueSearch = strQueSearch + " and t_Que.QueQuantity <@QueQuantity "
ElseIf RemainingCallsMod = 2 Then
'=
strQueSearch = strQueSearch + " and t_Que.QueQuantity =@QueQuantity "
End If
End If
If TotalCalls > 0 Then
If TotalCallsMod = 0 Then
'>
strQueSearch = strQueSearch + " and t_Que.QueTotal >@QueTotal "
ElseIf TotalCallsMod = 1 Then
'<
strQueSearch = strQueSearch + " and t_Que.QueTotal <@QueTotal "
ElseIf TotalCallsMod = 2 Then
'=
strQueSearch = strQueSearch + " and t_Que.QueTotal =@QueTotal "
End If
End If
If Bonus > 1 Then
strQueSearch = strQueSearch + " and t_Que.BonusID =@BonusID "
End If
If Keyword1 <> "" Then
strQueSearch = strQueSearch + " and t_Que.QueNotes like '%'+@Keyword1+'%' "
End If
If Keyword2 <> "" Then
strQueSearch = strQueSearch + " and t_Que.QueNotes like '%'+@Keyword2+'%' "
End If
If Keyword3 <> "" Then
strQueSearch = strQueSearch + " and t_Que.QueNotes like '%'+@Keyword3+'%' "
End If
If Keyword4 <> "" Then
strQueSearch = strQueSearch + " and t_Que.QueNotes like '%'+@Keyword4+'%' "
End If
If Keyword5 <> "" Then
strQueSearch = strQueSearch + " and t_Que.QueNotes like '%'+@Keyword5+'%' "
End If
'makes statement into sqlcommand
C.daQueSearch.SelectCommand.CommandText = strQueSearch
'var declaration
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@BatchID", SqlDbType.VarChar, 12))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@Manager", SqlDbType.Int))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@RepID", SqlDbType.Int))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@QueDate", SqlDbType.VarChar, 20)) '<--- This is what,when i change to datetime, says it cant convert
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@QueStartDate", SqlDbType.VarChar, 20))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@QueDateComplete", SqlDbType.VarChar, 20))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@QuePriority", SqlDbType.Int))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@QueQuantity", SqlDbType.BigInt))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@QueTotal", SqlDbType.BigInt))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@BonusID", SqlDbType.SmallInt))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@Keyword1", SqlDbType.VarChar, 50))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@Keyword2", SqlDbType.VarChar, 50))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@Keyword3", SqlDbType.VarChar, 50))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@Keyword4", SqlDbType.VarChar, 50))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@Keyword5", SqlDbType.VarChar, 50))
'data entry
C.daQueSearch.SelectCommand.Parameters("@BatchID").Value = BatchID
C.daQueSearch.SelectCommand.Parameters("@Manager").Value = CreatedBy
C.daQueSearch.SelectCommand.Parameters("@RepID").Value = CreatedFor
C.daQueSearch.SelectCommand.Parameters("@QueDate").Value = DateCreated
C.daQueSearch.SelectCommand.Parameters("@QueStartDate").Value = DateStarted
C.daQueSearch.SelectCommand.Parameters("@QueDateComplete").Value = DateCompleted
C.daQueSearch.SelectCommand.Parameters("@QuePriority").Value = Priority
C.daQueSearch.SelectCommand.Parameters("@QueQuantity").Value = RemainingCalls
C.daQueSearch.SelectCommand.Parameters("@QueTotal").Value = TotalCalls
C.daQueSearch.SelectCommand.Parameters("@BonusID").Value = Bonus
C.daQueSearch.SelectCommand.Parameters("@Keyword1").Value = Keyword1
C.daQueSearch.SelectCommand.Parameters("@Keyword2").Value = Keyword2
C.daQueSearch.SelectCommand.Parameters("@Keyword3").Value = Keyword3
C.daQueSearch.SelectCommand.Parameters("@Keyword4").Value = Keyword4
C.daQueSearch.SelectCommand.Parameters("@Keyword5").Value = Keyword5
Try
C.ndConnection.Open()
C.daQueSearch.SelectCommand.ExecuteNonQuery()
Catch ex As Exception
lblMainError1.Text = err("dbDGQSSearch " + ex.Source, ex.Message, CurUsr)
lblMainError1.Visible = True
Finally
C.ndConnection.Close()
End Try
FillQSDG()' this fills the datagrid
End Function
Hi,
Can anyone tell me how to convert date and time to string.
I got one field inside my database which contain data like below:
4/16/2004 10:19:01 AM
if i wan to call out a record which have to refer to the data above
Select *
From table_A
where field_date= ???????
what to fill in the ??????
Thanx
I'm importing dates into a table with Bulk insert
SET DATEFORMAT DMY
it works with dates e.g. "14/01/2009"
However sometimes I get dates in the format
"Fri 14/01/2009"
What is the best way to convert these.
I can only think of putting them in a staging table with all date fields as varchars Then updating these varchar fields
LTRIM(REPLACE(dtField, 'Mon', ''))
LTRIM(REPLACE(dtField, 'Tues', ''))
I am trying to convert a date-string of this format (DDMMMYY - ex. 06JAN15) to datetime but I keep on getting errors:
codes that I tried:
convert(datetime, '06JAN15', 6)
convert(datetime, '06JAN15', 112)
What date format code should I use for DDMMMYY?
Hello forum,
Is it possible to convert a date stored as a string into a datetime with integration services 2005? My attempts with the €œdata conversion€? fail. The string type form of the date is €˜yyyy-mm-dd€™ and the desired result for use in a Union All is €˜dd/mm/yyyy 12:00:00AM.€™ This outcome is needs so that match on the date can populate a fact table, as the results are coming from two different databases.
All advice/help welcomed.
Ian
Hello Everyone,
How can I convert the string column to date in SSIS.
Example:
I have a column which is having a value as €œ19890213€?
Basically this values is a date
Now I wanted this value to be a date value as €œ01/01/2007€?
i had try it out by doing this ways
(DT_DATE)(SUBSTRING(DATE_SEEN_SPEC,5,2) + "/" + SUBSTRING(DATE_SEEN_SPEC,7,2) + "/" + SUBSTRING(DATE_SEEN_SPEC,1,4))
but still i'm getting the error message.
I know the this can be achived through type cast in Derived Column compunent, but not sure with which cast please help me out in resoulving this issue.
Thank you
Hi There,
I am trying to create a report that sums up new cases weekly based on the previous 5 months. I have included some sample data below. The only field that displays a date is called monthSubmitted, varchar 7 and not very useful. How can I first convert this firld to a date ddmmyy?
How would you the code it so the user can run the report on demand at any given time and display the data for the last 5 months on a weekly basis? I am not sure as to how the date calculations should be coded.
12-Jan
19-Jan
26-Jan
2-Feb
9-Feb
16-Feb
23-Feb
MSS
New Cases Received
85
84
79
98
79
95
65
S1
30
32
27
40
42
38
29
S2
47
34
37
23
23
37
32
S3
3
7
-
17
4
1
9
Thanks,
Rhonda
Im working with a breaking system and I wont to convert the (FROM) datetime column to accept just time like (4:00:00 AM) without the date (7/23/2004) but it doesn’t have column format like the access ??
I found something in the SQL help :
How to convert the format of a Date Time String transformation (Enterprise Manager)
To convert the format of a Date Time String transformation
1.On the Transformations tab of the Transform Data Task Properties or Data Driven Query Task Properties dialog box, click the Source column containing the date or time to be modified, and then click the Destination column where you want the modified string to be placed.
2.Do one of the following:
•If there is a mapping arrow connecting the two columns, click Delete, and then click New.
•If there is no mapping arrow, click New.
3.In the Create New Transformation dialog box, click DateTime String.
4.Click the General tab, and then click Properties.
5.In the Date Format list, select the format you want.
6.Click Naming to display the Calendar Names dialog box, where you can select long or short day or month names and the A.M. and P.M. designators you want.
7.In the Language list, select the language you want, and then click Set Language Defaults.
But unfortunately I didn't find the "Transformations tab" I look a lot in the SQL Enterprise Manager
Do anybody work with the Transformations or at least know where is it please ???
I have a column value as '201303' for the date. I need to get the output into two columns as 2013 and Mar. The date column is a integer one.
How can I convert this date column in a Data Convertion task.
I have two fields DSRHADTI which is an isodate and DSRHTIME which is 8 char time field in format 10.31.00. I want to take both these fields and put them into a field that is database timestamp so I have converted DSRHDATI to 10 character field. I am then trying to use substring to put both into 18 character field using derived column transformation editor. but it does not like the below. It's red syntax error what am I missing.
(SUBSTRING(Copy of DSRHDATI,1,4) +' /' + SUBSTRING( Copy of DSRHDATI,6,2) + '/ ' + SUBSTRING(Copy of DSRHDATI,9,2)) + SUBSTRING(DSRHTIME,1,2) + '.' + SUBSTRING(DSRHTIME,4,2) + '.' + SUBSTRING(DSRHTIME,7,2)
One I get the above to work I plan on convert 18 char to datetimestamp.
Am I on the right track on how to do this?
Note the code below, running on the version noted.
I just found this today, figured I'd share. Not sure if it's a known bug or a "special" feature. The only difference between the two queries is the 3rd line, everything else is the same. Notice that the sort order changes, yet no errors or warnings are given. I assume that the table aliases are ignored for the order by, unless there are duplicate column names in the results.
I abstracted this from a bug I discovered in one of my apps today, where I have sales reps assigned to their clients with start and end dates. A while back, a developer asked me to format the dates without the time portion, and when I did so, I introduced the problem. I resolved it temporarily by ordering by convert(datetime, startdate) but I found it strange that the column alias match overrides the table alias attempted match in the order by. Another way to get around this would be to change the column aliases, then the sort order would be as desired, but I didn't want to have to change the app code for something so trivial.
My apologies if this is a duplicate.
@@version = Microsoft SQL Server 2005 - 9.00.3054.00 (X64) Mar 23 2007 18:41:50 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
select convert(varchar(10), table_alias.startdate, 101) as startdate,
convert(varchar(10), table_alias.enddate, 101) as enddate
from
(
select convert(datetime, dateadd(mm, -4, getdate()-1)) as startdate, convert(datetime, dateadd(mm, -4, getdate())) as enddate
union
select convert(datetime, dateadd(mm, -3, getdate()-1)) as startdate, convert(datetime, dateadd(mm, -3, getdate())) as enddate
union
select convert(datetime, dateadd(mm, -2, getdate()-1)) as startdate, convert(datetime, dateadd(mm, -2, getdate())) as enddate
union
select convert(datetime, dateadd(mm, -1, getdate()-1)) as startdate, convert(datetime, dateadd(mm, -1, getdate())) as enddate
union
select convert(datetime, getdate()-1) as startdate, convert(datetime, getdate()) as enddate
) as table_alias
order by table_alias.startdate
select convert(varchar(10), table_alias.startdate, 101) as startdate,
convert(varchar(10), table_alias.enddate, 101) as enddate,
table_alias.startdate, table_alias.enddate
from
(
select convert(datetime, dateadd(mm, -4, getdate()-1)) as startdate, convert(datetime, dateadd(mm, -4, getdate())) as enddate
union
select convert(datetime, dateadd(mm, -3, getdate()-1)) as startdate, convert(datetime, dateadd(mm, -3, getdate())) as enddate
union
select convert(datetime, dateadd(mm, -2, getdate()-1)) as startdate, convert(datetime, dateadd(mm, -2, getdate())) as enddate
union
select convert(datetime, dateadd(mm, -1, getdate()-1)) as startdate, convert(datetime, dateadd(mm, -1, getdate())) as enddate
union
select convert(datetime, getdate()-1) as startdate, convert(datetime, getdate()) as enddate
) as table_alias
order by table_alias.startdate
Hello,
I have tried a few different things within a Derived Column transform to convert a unicode yymmdd date string to SQL Server DateTime.
Does anyone have ideas on how to do this?
Thank you for your help!
cdun2
I need to pass in null/blank value in the date field or declare the field as string and convert date back to string.
I tried the 2nd option but I am having trouble converting the two digits of the recordset (rs_get_msp_info(2), 1, 2))) into a four digit yr. But it will only the yr in two digits.
The mfg_start_date is delcared as a string variable
mfg_start_date = CStr(CDate(Mid(rs_get_msp_info(2), 3, 2) & "/" & Mid(rs_get_msp_info(2), 5, 2) & "/" & Mid(rs_get_msp_info(2), 1, 2)))
option 1
I will have to declare the mfg_start_date as date but I need to send in a blank value for this variable in the stored procedure. It won't accept a null or blank value.
With refresh_shipping_sched
.ActiveConnection = CurrentProject.Connection
.CommandText = "spRefresh_shipping_sched"
.CommandType = adCmdStoredProc
.Parameters.Append .CreateParameter("ret_val", adInteger, adParamReturnValue)
.Parameters.Append .CreateParameter("@option", adInteger, adParamInput, 4, update_option)
.Parameters.Append .CreateParameter("@mfg_ord_num", adChar, adParamInput, mfg_ord_num_length, "")
.Parameters.Append .CreateParameter("@mfg_start_date", adChar, adParamInput, 10, "")
Set rs_refresh_shipping_sched = .Execute
End
Please help
I am inserting date and time data into a SQL Server 2012 Express table from an application. The application is providing the date and time as a string data type. Is there a TSQL way to convert the date and time string to an SQL datetime date type? I want to do the conversion, because SQL displays an error due to the
My date and time string from the application looks like : 3/11/2014 12:57:57 PM
Hi!
Is it possible to convert a 'dd.mm.yyyy' string into an mm/dd/yyyy date using convert or cast?The date format set on the sql server is mm/dd/yyyy...
Thanks!
Dear Experts,Ok, I hate to ask such a seemingly dumb question, but I'vealready spent far too much time on this. More that Iwould care to admit.In Sql server, how do I simply change a character into a number??????In Oracle, it is:select to_number(20.55)from dualTO_NUMBER(20.55)----------------20.55And we are on with our lives.In sql server, using the Northwinds database:SELECTr.regionid,STR(r.regionid,7,2) as a_string,CONVERT(numeric, STR(r.regionid,7,2)) as a_number,cast ( STR(r.regionid) as int ) as cast_to_numberFROM REGION R1 1.00112 2.00223 3.00334 4.0044SELECTr.regionid,STR(r.regionid,7,2) as a_string,CONVERT(numeric, STR(r.regionid,7,2) ) as a_number,cast (STR(r.regionid,7,2) as numeric ) as cast_to_numberFROM REGION R1 1.00112 2.00223 3.00334 4.0044Str converts from number to string in one motion.Isn't there a simple function in Sql Server to convertfrom string to number?What is the secret?Thanks
View 4 Replies View RelatedHiI am using SQL 2005, VB 2005I am trying to insert a record using parameters using the following code as per MotLey suggestion and it works finestring insertSQL; insertSQL = "INSERT INTO Issue(ProjectID, TypeofEntryID, PriorityID ,Title, Area) VALUES (@ProjectID, @TypeofEntryID, @PriorityID ,@Title, @Area)"; cmdInsert SqlCommand; cmdInsert=new SqlCommand(insertSQL,conn); cmdInsert.Parameters.Add("@ProjectID",SqlDbType.Varchar).Value=ProjectID.Text; My query is how to detail with dates my previous code wasinsertSQL += "convert(datetime,'" + DateTime.Now.ToString("dd/MM/yy") + "',3), '";I tried the code below but the record doesn't save?string date = DateTime.Now.ToString("dd/MM/yy"); insertSQL = "INSERT INTO WorkFlow(IssueID, TaskID, TaskDone, Date ,StaffID) VALUES (@IDIssue, @IDTask, @TaskDone, convert(DateTime,@Date,3),@IDStaff)"; cmdInsert.Parameters.Add("IDIssue", SqlDbType.Int).Value = IDIssue.ToString();cmdInsert.Parameters.Add("IDTask",SqlDbType.Int).Value = IDTask.Text;cmdInsert.Parameters.Add("TaskDone",SqlDbType.VarChar).Value = TaskDoneTxtbox.Text;cmdInsert.Parameters.Add("Date",SqlDbType.DateTime).Value = date;cmdInsert.Parameters.Add("IDStaff",SqlDbType.Int).Value = IDStaff.Text;Could someone point to me in the right direction?Thanks in advance
View 3 Replies View RelatedIn SQL Server 2000:
How do I convert a Julian date to a Gregorian date?
How do I convert a Gregorian date to Julian?
Examples please.
Many thanks in advance.
Gary Andrews
So I have to build dynamic T-SQL because of a date parameter that will be provided. The Date Parameter will be provided in SSRS in normal MM/DD/CCYY format. So how do I then convert that date to my Oracle format
NUMERIC(8,0) CCYYMMDD?
I tried this...
SET@SQLQuery=@SQLQuery+'ANDMEMBER_SPAN.YMDEFF<='''''+CAST(@AsOfDateASVARCHAR)+''''''+@NewLineChar;
SET@SQLQuery=@SQLQuery+'ANDMEMBER_SPAN.YMDEFF>='''''+CAST(@AsOfDateASVARCHAR)+''''''+@NewLineChar;
but that put it in the format of...
AND
MEMBER_SPAN.YMDEFF<=''2015-04-01''
AND
MEMBER_SPAN.YMDEFF>=''2015-04-01''
Which is close...I think I just need to lose the "-"
Hi there.
I'm trying to extract data from my SQL server & everything in the script I've got is working (extracting correct data) except for one field - which is for the most part it's off by +2 days (on a few occasions - I see it off by just +1 day or even +3, but it's usually the +2 days).
I'm told that it's due to the conversion formula - but - since SQL is not my native language, I'm at a bit of a loss.
The DB table has the date field stored as a type: CHAR (as opposed to 'DATE')
Can anyone out there help?
Please advise. Thanks.
Best.
K7
I have passed createdDate from UI to Stored procedure.createdDate field declared with DateTime.it is having value 2014-07-01.I need to fetch records from the database based upon the created field.but Create_TM in database having value Date with timestamp.so how would i change the createdfield in stored procedure.
ALTER PROCEDURE [dbo].[ByDateRange]
@Feed VARCHAR(50),
@CreatedDate DATETIME
select * from Date_table where Create_TM = @CreatedDate
My source database stores dates as integers (e.g. 20070101). I need to convert to a "real" date for my target system.
I'm guessing I need to create a derived column - could someone help me out with the appropriate expression?
Thanks,
JG
I have the following
Column Name : [Converted Date]
Data Type : varchar(50)
When I try and do month around the [Converted Date] I get the following error message
“Msg 241, Level 16, State 1, Line 2
Conversion failed when converting date and/or time from character string.â€
My Query is
SELECT
month([Created Date])
FROM [FDMS_PartnerReporting].[Staging].[Salesforce_MarketingReporting]
SELECT * ,[Due]
 FROM [Events]
 Where Due >= getdate() +90
This returns the error: Conversion failed when converting date and/or time from character string
Why would this be? How to cast or convert this so that it will work?Â
I asked this question below, but the answer was that the conversion will take place automatically, but I can't get that to happen. I have a flat file with an 8 position field that I identify as string (and I also tried date) that is yyyymmdd and it needs to go into the database field that is datetime format. IS there something I am doing wrong with the definition of it, or do I need to add some kind of conversion, and if so, what and how would that be done. I'm a dts Sql2000 expert, but the SSIS thing is driving me crazy. I have a ton of dts' to convert and the migration tool doesn't work because there are a lot of active X scripts in them. thanks for your help. Boston Rose
View 1 Replies View Related