How To Delete A Row In Excel
Apr 14, 2008
Hi everybody,
i have a package that imports some data into an excel file that has an header section and a data section with different formatting.
I use an excel template file with the header and a blank data row and then a pull my data into a copy of this template, because this is the only way i've found to correct formatting the data row, but it seems to be a problem for my client who want this blank row to be deleted. How can i do this?
Please help me...
TIA,
Gianni
View 7 Replies
ADVERTISEMENT
Jan 31, 2008
How to delete rows in an excel worksheet?
I have the following code in the exeutesqltask but i keep getting a syntx error.
'DELETE FROM 4DialMeters'
Remeber that this is an Excel source and I need to find out what the correct syntax is for the DELETE Statement in Excel.
View 5 Replies
View Related
May 15, 2008
Hey all
I am exporting table rows (based on a query) into an excel file but I don't want to append to the file. I would like to delete the rows that were previously added and then add the new data. The file has column headings and I would like these to exist all the time.
I know how to export the data but don't know how to delete 'old' data rows from excel.
Any guidance will be highly appreciated.
Many thanks,
Rupa
View 5 Replies
View Related
Jul 23, 2005
I have a DTS package that needs to refresh data in 3 separate Excelspreadsheets on a daily basis. The problem is that unless I manuallydelete the previous day's data, it appends rather than replaces.I can't delete the excel files on a daily basis, as they have to bethere for the DTS package to be able to export to Excel. What I wantto do is create a VBScript (ActiveX Control) to delete all the rows ofdata except the first row within each spreadsheet as the first step ofthe DTS package. Then the remaining steps would run and thespreadsheets would only have the current day's data at the end of theprocess.Thanks for any help offered.
View 1 Replies
View Related
Feb 23, 2008
Hello,
I would like to delete all data from an excel sheet except the headers row.
Is there any way to do this using Openrowset with JET or something like that?
Thanks
Philippe
View 26 Replies
View Related
May 5, 2006
Hi everyone,
I have a task to create a dts package, which will delete records in a SQL table, which are present on a sheet tab in Excel. I know how to transfer records from Excel to SQL table and vice versa, but not sure how I can delete the records in SQL table, which are present in Excel. Note that there are just 2 columns - one is a key and the other name.
Thank you all in advance,
Saurav
View 1 Replies
View Related
Jun 18, 2007
Hi :1. I import data into sqlserver, from an excel file, from a worksheetwithin it, named 'input_data'2. then i scrub the data in sqlserver3. then i export some data into the same excelfile but into anotherworksheet named 'output_data'I have got it working and this is how i am doing it right now. I amhaving a problem in the few steps identified below :1. I delete the worksheet 'output_data' using an execsql taskDROP TABLE `output_data'2. Then i have another execsql task to create itCREATE TABLE `output_data`3. Then i have datapump task to put data into worksheet.The work fine, but i am running into a problem, when the output_dataworksheet doesnt exist.So i need to write a query tellingIF `output_data` doesnt exist, then DROP ITHow do i do thisI am open to doing this in ActiveX Script(vbscript) and ExecSQL taskAlso i do not have excel dll or runtime in my dbserver.Please let me knowthanksRS
View 1 Replies
View Related
Oct 15, 2015
I am getting 3 sheets in an excel file. But only the sheet1 contains data and the rest are blank. I want to delete Sheet2 and Sheet3 from excel file using SSIS.
View 3 Replies
View Related
Oct 2, 2007
I have an excel sheet and I want to transfer data from this sheet to a table.But the sheet has some irrelevant rows at the beginning,I want to delete them.How do I do this using script task or any other task?
Since I am just a beginner,it would be nice if you could provide some code samples or a helpful link
Thanks in advance.
View 7 Replies
View Related
Apr 27, 2015
I need to delete the second row in an excel file in my SSIS package. Is that possible to do?
View 2 Replies
View Related
Feb 5, 2007
Hi,
Question pls. I have an MS SQL local package where it exports data from SQL table to Excel file. My question is, how can erase all the records in my excel file before i export the new data from SQL table?
What i want is to delete the rows in the destination file before inserting new records.
Thanks a lot.
View 7 Replies
View Related
Jan 28, 2008
Hi,
i hv made a rdl having 2 tables.My requirement is to display the tables on different sheets of excel, so i hv inserted "Page Break At End" in table1.
As a result im getting tables in different sheets but second table (in sheet2) is starting from 2nd row of the sheet i.e. 1st row is coming as hidden, and i want to remove this row as client feed's this excel file in some other application.
If anyone is aware of the solution pl. reply ASAP.
Thank u.
View 3 Replies
View Related
May 28, 2015
i need to Delete/Overwrite Rows in Excel without using Script Task in SSIS.
View 4 Replies
View Related
Sep 11, 2015
I have some simple files but they are failing because the delete history task is failing as it is looking for files in a non existent directory.
It is looking for files in C:Program FilesMicrosoft SQL ServerMSSQL10_50.INSTANCEMSSQLLog whereas it should be looking in C:Program FilesMicrosoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLLog
how I can get this corrected so I can get the Maintenance Plans to run correctly.
I have tried deleting and recreating the Plan but to no avail
View 0 Replies
View Related
May 19, 2012
I am using Master Data Service for couple of months now. I can load, update, merge and soft delete data in MDS. Occasionally we even have to hard delete data from MDS. If we keep on soft deleting records in a MDS table eventually there will be huge number of soft deleted records. Is there an easy way to hard delete all the soft deleted records from all MDS tables in a specific Model.
View 18 Replies
View Related
Oct 23, 2004
Hello:
Need some serious help with this one...
Background:
Am working on completing an ORM that can not only handles CRUD actions -- but that can also updates the structure of a table transparently when the class defs change. Reason for this is that I can't get the SQL scripts that would work for updating a software on SqlServer to be portable to other DBMS systems. Doing it by code, rather than SQL batch has a chance of making cross-platform, updateable, software...
Anyway, because it needs to be cross-DBMS capable, the constraints are that the system used must work for the lowest common denominator....ie, a 'recipe' of steps that will work on all DBMS's.
The Problem:
There might be simpler ways to do this with SqlServer (all ears :-) - just in case I can't make it cross platform right now) but, with simplistic DBMS's (SqlLite, etc) there is no way to ALTER table once formed: one has to COPY the Table to a new TMP name, adding a Column in the process, then delete the original, then rename the TMP to the original name.
This appears possible in SqlServer too --...as long as there are no CASCADE operations.
Truncate table doesn't seem to be the solution, nor drop, as they all seem to trigger a Cascade delete in the Foreign Table.
So -- please correct me if I am wrong here -- it appears that the operations would be
along the lines of:
a) Remove the Foreign Key references
b) Copy the table structure, and make a new temp table, adding the column
c) Copy the data over
d) Add the FK relations, that used to be in the first table, to the new table
e) Delete the original
f) Done?
The questions are:
a) How does one alter a table to REMOVE the Foreign Key References part, if it has no 'name'.
b) Anyone know of a good clean way to get, and save these constraints to reapply them to the new table. Hopefully with some cross platform ADO.NET solution? GetSchema etc appears to me to be very dbms dependant?
c) ANY and all tips on things I might run into later that I have not mentioned, are also greatly appreciated.
Thanks!
Sky
View 1 Replies
View Related
Nov 13, 2006
I am having great difficulty with cascading deletes, delete triggers and referential integrity.
The database is in First Normal Form.
I have some tables that are child tables with two foreign keyes to two different parent tables, for example:
Table A
/
Table B Table C
/
Table D
So if I try to turn on cascading deletes for A/B, A/C, B/D and C/D relationships, I get an error that I cannot have cascading delete because it would create multiple cascade paths. I do understand why this is happening. If I delete a row in Table A, I want it to delete child rows in Table B and table C, and then child rows in table D as well. But if I delete a row in Table C, I want it to delete child rows in Table D, and if I delete a row in Table B, I want it to also delete child rows in Table D.
SQL sees this as cyclical, because if I delete a row in table A, both table B and table C would try to delete their child rows in table D.
Ok, so I thought, no biggie, I'll just use delete triggers. So I created delete triggers that will delete child rows in table B and table C when deleting a row in table A. Then I created triggers in both Table B and Table C that would delete child rows in Table D.
When I try to delete a row in table A, B or C, I get the error "Delete Statement Conflicted with COLUMN REFERENCE". This does not make sense to me, can anyone explain? I have a trigger in place that should be deleting the child rows before it attempts to delete the parent row...isn't that the whole point of delete triggers?????
This is an example of my delete trigger:
CREATE TRIGGER [DeleteA] ON A
FOR DELETE
AS
Delete from B where MeetingID = ID;
Delete from C where MeetingID = ID;
And then Table B and C both have delete triggers to delete child rows in table D. But it never gets to that point, none of the triggers execute because the above error happens first.
So if I then go into the relationships, and deselect the option for "Enforce relationship for INSERTs and UPDATEs" these triggers all work just fine. Only problem is that now I have no referential integrity and I can simply create unrestrained child rows that do not reference actual foreign keys in the parent table.
So the question is, how do I maintain referential integrity and also have the database delete child rows, keeping in mind that the cascading deletes will not work because of the multiple cascade paths (which are certainly required).
Hope this makes sense...
Thanks,
Josh
View 6 Replies
View Related
Nov 17, 2006
I'm trying to clean up a database design and I'm in a situation to where two tables need a FK but since it didn't exist before there are orphaned records.
Tables are:
Brokers and it's PK is BID
The 2nd table is Broker_Rates which also has a BID table.
I'm trying to figure out a t-sql statement that will parse through all the recrods in the Broker_Rates table and delete the record if there isn't a match for the BID record in the brokers table.
I know this isn't correct syntax but should hopefully clear up what I'm asking
DELETE FROM Broker_Rates
WHERE (Broker_Rates.BID <> Broker.BID)
Thanks
View 6 Replies
View Related
Nov 26, 2007
this is my Delete Query NO 1
alter table ZT_Master disable trigger All
Delete ZT_Master WHERE TDateTime> = DATEADD(month,DATEDIFF(month,0,getdate())-(select Keepmonths from ZT_KeepMonths where id =1),0) AND TDateTime< DATEADD(month,DATEDIFF(month,0,getdate()),0)
alter table ZT_Master enable trigger All
I have troble in Delete Query No 2
here is a select statemnt , I need to delete them
select d.* from ZT_Master m, ZT_Detail d where (m.Prikey=d.MasterKey) And m.TDateTime> = DATEADD(month,DATEDIFF(month,0,getdate())-(select Keepmonths from ZT_KeepMonths where id =1),0) AND m.TDateTime< DATEADD(month,DATEDIFF(month,0,getdate()),0)
I tried modified it as below
delete d.* from ZT_Master m, ZT_Detail d where (m.Prikey=d.MasterKey) And m.TDateTime> = DATEADD(month,DATEDIFF(month,0,getdate())-(select Keepmonths from ZT_KeepMonths where id =1),0) AND m.TDateTime< DATEADD(month,DATEDIFF(month,0,getdate()),0)
but this doesn't works..
can you please help?
and can I combine these 2 SQL Query into one Sql Query? thank you
View 1 Replies
View Related
Feb 16, 2008
I'm using SqlDataSource and an Access database. Let's say I got two tables:user: userID, usernamemessage: userID, messagetextLet's say a user can register on my website, and leave several messages there. I have an admin page where I can select a user and delete all of his messages just by clicking one button.What would be the best (and easiest) way to make this?Here's my suggestion:I have made a "delete query" (with userID as parameter) in MS Access. It deletes all messages of a user when I type in the userID and click ok.Would it be possible to do this on my ASP.net page? If yes, what would the script look like?(yes, it is a newbie question)
View 2 Replies
View Related
Sep 16, 2013
The requirement is: I should allow single row delete from a table but not bulk delete. An audit table should get updated if there is any single delete or single update. So I wrote the triggers as follows: for single and bulk delete
ALTER TRIGGER [dbo].[TRG_Delete_Bulk_tbl_attendance]
ON [dbo].[tbl_attendance]
AFTER DELETE
AS
[code]...
When I try to run the website, the database error I am getting is:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 0, current count = 1.
View 3 Replies
View Related
Aug 20, 2007
I ran the following query in Query Analyzer on a machine running SQL Server 2000. I'm attempting to delete from a linked server running SQL Server 2005:
DELETE FROM sql2005.production.dbo.products
WHERE vendor='Foo'
AND productId NOT IN
(
SELECT productId FROM sql2000.staging.dbo.fooProductList
)
The status message (and @@ROWCOUNT) told me 8 rows were affected, but nothing was actually deleted; when I ran a SELECT with the same criteria as the DELETE, all 8 rows are still there. So, once more I tried the DELETE command. This time it told me 7 rows were affected; when I ran the SELECT again, 5 of the rows were still there. Finally, after running this exact same DELETE query 5 times, I was able to remove all 8 rows. Each time it would tell me that a different number of rows had been deleted, and in no case was that number accurate.
I've never seen anything like this before. Neither of the tables involved were undergoing any other changes. There's no replication going on, or anything else that should introduce any delays. And I run queries like this all day, involving every thinkable combination of 2000 and 2005 servers, that don't give me any trouble.
Does anyone have suggestions on what might cause this sort of behavior?
View 3 Replies
View Related
Nov 20, 2007
Hi,
I have a problem with one report on my server. A user has requested that I exclude him from receiving a timed email subscription to several reports. I was able to amend all the subscriptions except one. When I try to remove his email address from the subscription I receive this error:
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
For more information about this error navigate to the report server on the local server machine, or enable remote errors
Online no help couldn't offer any advice at all, so I thought I'd just delete the subscription and recreate it again, but I receive the same message. "Okay, no problem, I'll just delete the report and redeploy it and set up the subscription so all the other users aren't affected", says I. "Oh, no!", says the report server, and then it give me this message:
System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.Data.SqlClient.SqlException: Only members of sysadmin role are allowed to update or delete jobs owned by a different login. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.DBInterface.DeleteObject(String objectName) at Microsoft.ReportingServices.Library.RSService._DeleteItem(String item) at Microsoft.ReportingServices.Library.RSService.ExecuteBatch(Guid batchId) at Microsoft.ReportingServices.WebServer.ReportingService2005.ExecuteBatch() --- End of inner exception stack trace ---
What's even weirder is that I'm the owner and creator of the report and I'm a system admin and content manager on the report server and I set up the subscription when the report was initially deployed. Surely I should have sufficient rights to fart around with this subscription/report as I see fit?
I have rebooted the server, redeployed the report, checked credentials on the data source and tried amending and deleting from both the report manager and management studio but still I am prevented from doing so.
Any help would be much appreciated.
Thanks in advance,
Paul
View 3 Replies
View Related
Feb 23, 2006
First, this is not my code.
This one is weird and I am missing something fundamental on this one. A developer was getting a timeout with this...
CREATE PROCEDURE p_CM_DeleteBatch
(
@SubmitterTranID VARCHAR(50)
)
AS
DECLARE
@COUNT INT,
@COMMIT INT
SET @COUNT = 0
SET @COMMIT = 1 --DO NOT CHANGE THIS. The Operation will be commited only when this value is 1
select @COUNT = COUNT(*) from claimsreceived
where (claimstatus NOT IN ('Keyed', 'Imported')) AND
SubmitterTranID = @SubmitterTranID
IF (@COUNT = 0) --This means that that Claims under this Batch have not been adjudicated & it is safe to delete
BEGIN
BEGIN TRANSACTION
DELETE FROM INVOICECLAIMMAPPING WHERE CLMRECDID IN (SELECT DISTINCT CLMRECDID FROM CLAIMSRECEIVED WHERE SUBMITTERTRANID = @SUBMITTERTRANID)
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsPayment WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsPaymentServices WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsreceivedPayorServices where ClmRecdPyID in (SELECT ClmRecdPyID
FROM ClaimsReceivedPayors
WHERE SubmitterTranID = @SubmitterTranID)
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceivedPayors WHERE ClmRecdid in (SELECT ClmRecdID
FROM ClaimsReceived
WHERE SubmitterTranID = @SubmitterTranID)
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceivedServices WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceived WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM BATCHLOGCLAIMS WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
IF (@COMMIT = 1)
BEGIN
--ROLLBACK TRANSACTION --For Testing Purpose ONLY
COMMIT TRANSACTION
RETURN (0)
END
ELSE
BEGIN
ROLLBACK TRANSACTION
RETURN (-1)
END
END
ELSE
BEGIN
RaisError ('This Batch cannot be deleted. It has claim(s) which has been Adjudicated', 16, 1)
END
GO
I applied a couple of indices and got ride of the uncorrelated subqueries
CREATE PROCEDURE p_CM_DeleteBatch
(
@SubmitterTranID VARCHAR(50)
)
AS
DECLARE
@COUNT INT,
@COMMIT INT
SET @COUNT = 0
SET @COMMIT = 1 --DO NOT CHANGE THIS. The Operation will be commited only when this value is 1
select @COUNT = COUNT(*) from claimsreceived
where (claimstatus NOT IN ('Keyed', 'Imported')) AND
SubmitterTranID = @SubmitterTranID
IF (@COUNT = 0) --This means that that Claims under this Batch have not been adjudicated & it is safe to delete
BEGIN
BEGIN TRANSACTION
DELETE INVOICECLAIMMAPPING
FROM INVOICECLAIMMAPPING
JOIN CLAIMSRECEIVED
ON INVOICECLAIMMAPPING.CLMRECDID = CLAIMSRECEIVED.CLMRECDID
WHERE CLAIMSRECEIVED.SUBMITTERTRANID = @SUBMITTERTRANID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsPayment
WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsPaymentServices WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE ClaimsreceivedPayorServices
FROM ClaimsreceivedPayorServices
JOIN ClaimsReceivedPayors
ON ClaimsreceivedPayorServices.ClmRecdPyID = ClaimsReceivedPayors.ClmRecPyID
WHERE ClaimsReceivedPayors.SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE ClaimsReceivedPayors
FROM ClaimsReceivedPayors
JOIN ClaimsReceived
ON ClaimsReceivedPayors.ClmRecdid = ClaimsReceived.ClmRecdid
WHERE ClaimsReceived.SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceivedServices WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceived WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM BATCHLOGCLAIMS WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
IF (@COMMIT = 1)
BEGIN
--ROLLBACK TRANSACTION --For Testing Purpose ONLY
COMMIT TRANSACTION
RETURN (0)
END
ELSE
BEGIN
ROLLBACK TRANSACTION
RETURN (-1)
END
END
ELSE
BEGIN
RaisError ('This Batch cannot be deleted. It has claim(s) which has been Adjudicated', 16, 1)
END
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
Suddenly this constraint was being violated with the change
ALTER TABLE [dbo].[ClaimsReceivedPayorServices] ADD CONSTRAINT [FK_ClaimsReceivedPayorServices_CLAIMSRECEIVEDPAYOR S] FOREIGN KEY
(
[ClmRecdPyID]
) REFERENCES [CLAIMSRECEIVEDPAYORS] (
[CLMRECPYID]
)
Is the delete on ClaimsReceivedPayors starting before the delete on ClaimsreceivedPayorServices finishes? If so why would it matter between the join and subquery? This one is making me depressed because I can not explain it.
View 2 Replies
View Related
Apr 3, 2008
Hi all
Need some advice solving a little problem I have with my database!
Current setup:
I have a person table that is made up of 39 columns. I also allow for person records to be deleted but I do this by having another table I call LogicallyDeletedrecords. This table is made up of the PersonId, Reason for deletion/suppression and a date time stamp. To access Live records I created a view based on my Person table which contains a WHERE clause to exclude records that exist in the LogicallyDeletedrecords. Similarly, I have another view DeadPersonData which contains Person records that have been removed. Hope it all makes sense so far! Now on to my worries!
The problem:
My Person table contains 9+ million records. The LogicallyDeletedrecords table has 500k+ but I anticipate further growth over the coming weeks/months. My worry is that my LivePersonData view will be too slow to access as my LogicallyDeletedrecords table grows. What’s more, as part of my Load routine, I have to make sure that Person data loaded on to the system is excluded if that same person exists as a deleted member. Both of these actions could slow down my system as the deleted table grows.
My thoughts:
I’ve been thinking of physically deleting dead Person records from my person table (possibly creating an archive table to hold them). But then if I delete them how do I cross check the details when new Person details get loaded?! As I said, my current LogicallyDeletedrecords table holds the PersonId, ReasonDeleted and CreationStamp. The only way is to add further columns which I use to match Person Details?
Any design suggestions would be welcome!
View 3 Replies
View Related
Aug 12, 2007
I am trying to write one sql statement that deletes from two tables. Is it possible ? If yes, any thoughts ?
View 5 Replies
View Related
Feb 1, 2007
Hi seniors
there are two tables involve in replication let say table1 and replicated table is also rep.table1.
we are not deleting records physically in table1 so only a bit in table1 has true when u want to delete a record but the strange thing is that replication agaent report that this is hard delete operation on table1 so download and report hard delete operation and delete the record in replicated table which is very crucial.
plz let me know where am i wrong and how i put it into right way.
there is no triggers on published tables and noother trigger is created on published table.
regards
Ahmad Drshen
View 6 Replies
View Related
Jul 25, 2015
Trying to upload excel in server where excel is not installed. BIDs was there in the server, when i am trying to craete Excel source I am not able.what the workround for this.. How to upload excel without excel installed on the server.
View 4 Replies
View Related
Nov 19, 2007
I am using a Excel Source to get the data from an excel file to sql server 2005 table. A couple columns are coming in a double precision float, but some values have characters in them, but those values are coming out as null, even though I changed the datatype from float to unicode string. Any inputs on resolving this will be much appreciated.
Thanks,
Manisha
View 4 Replies
View Related
Sep 13, 2015
We have 10 sheets in Excel File and 10 sheet contains errror data. How to load 9 sheets data in to 1 destination and error data in to other destination?
View 4 Replies
View Related
Feb 22, 2006
I am trying to get the contents of the Excel Files dynamically and dumping into the SQL Database using SSIS. Through WMI Event Watcher, I could find when one or more Excel files dumped in a particular folder and using ForEach Loop Container I was able to take all the filenames and pass it through Variables. But at the same time in the Data Flow, I have to pass each Sheet of an Excel File to the Excel Source control and export the data to my SQL Database using OLEDB Destination.
For that I need to get the names of each sheets in an Excel File and pass it to the Excel Source Control through variables. But when I give Data Access Mode as "Table name or view name variable" and provide the variable name in that, then it is giving an error message as "A destination table name has not been provided".
And at the same time, Since I was not able to provide an static Filename (as I am passing through Variables), when I tried to map the columns in the OleDB Destination, it is not allowing me to map the columns.
So all these things I should do at Run-time using Variables in SSIS. I don't want to hard-code any filenames or Sheet names. If any one of you have a solution, please share with me.
Thanks & Regards,
Prakash Srinivasan
View 3 Replies
View Related
Jun 14, 2006
l've the following situation,
l've some excel files controlled by Vendor which changing frequently. The only thing does not change is the header name of each column.
So my question is, is there any way to create a new table based on the excel file selected including the column name in SSIS? So that l can use the data reader as source to select those columns l am interested on and start the integration.
Thanks.
Regards,
Yong Boon, Lim
p/s : The excel header is at the row 7.
View 3 Replies
View Related
Dec 18, 2006
i have an SSIS package that exports to an excel file. This works fine. the problem is that it appends the data instead of overwriting the file. Is there any way to overwrite the file like you can with a flat file? I have to email the file everyweek and don't want to have to clear it out manually. Any help would be appreciated
View 2 Replies
View Related
