How To Display Data Retrieved In DataGridView Using SQL With Vb.net?
Feb 27, 2008hi, could anyone tell me how to display data retrieved using sql in DataGridView?
View 6 Replies
ADVERTISEMENT
DataGridView: How Can I Update Data In A DataGridView?
Jan 11, 2007Hi guys,
Im having some issues understanding how to manipulate the data that is in my DataGridView
The View is created by calling a stored procedure from VB code and works on two tables:
people
pswds
The columns required from Table people are (personid, userid and sort).
The columns required from Table pswds are (comment and activeuser).
Table people is parent table while pswds is the child table.
The Relationship works between both tables using primary keys from both tables: which is called personid in both.
The link below shows the Relationship Diagram for the Two tables:
http://cale.csd.anglia.ac.uk/~csd03ib/images/RelationTables.bmp
The code for the Stored procedure can be found at the following Link:
http://cale.csd.anglia.ac.uk/~csd03ib/images/StoredProcedure.bmp
Now the DataGridView returned by the Stored procedure produces the following output found at this link:
http://cale.csd.anglia.ac.uk/~csd03ib/images/DataGridView.bmp
Of course there are many more results returned for this DataGridView but i have only shown a few of them. What i really need to know is:
Can this view be made to be editable?
I need to be able to update the both the Active user Check box and the Comment Columns from this view
I hope someone can help
Thx Flakky
Populating DataGridView With Data From Two Tables?
Oct 11, 2007I am sorry for asking such a broad question, but I have been working on this and from what I can gather it can be done. My problem is that much of it has gone right over my head and I am getting more confused the more I read... I'm really, really confused...
Basically, I have a dataGridView that is populated with a number of fields from Table1 (ID, NameID, Status, Phone, Notes). This works fine, BUT I would like to access Table2 and have, where ID in Table2 = NameID in Table1, it load the First Name & Last Name into the dataGridView. I am able to load the information from Table 2 like so: SELECT NameFirst + ' ' + NameLast from Table2", but I can't get both Tables to work correctly.
I would like the dataGridView to be layed out like this:
ID NameID Name (NameFirst + NameLast) Status Phone Notes
I can't for the life of me understand or get this to work (Or for that matter even understand what I am trying to do...
Also, I am using Access 2007.
I would greatly appreciate some help, and possibly some explanation in laymans terms so that I might be able to understand this. I have read a lot about this, but for whatever reason it is just soooooo over my head that I can't follow it whatsoever.
Here is the code as it stands now:
//Populate the DataGridView
string conString = @"Provider=Microsoft.ACE.OLEDB.12.0;Data Source=" + Environment.CurrentDirectory + @"DB.accdb;Jet OLEDBatabase Password=MyPassword;";
// create and open the connection
OleDbConnection conn = new OleDbConnection(conString);
OleDbCommand command = new OleDbCommand();
command = conn.CreateCommand();
// create the DataSet
DataSet ds = new DataSet();
// run the query
command.CommandText = "SELECT ID AS [#], NameID AS [Name], Status AS [Status], Phone AS [Phone], Notes AS [Notes] FROM Table1 WHERE ID = " + textBox13.Text + ";";
OleDbDataAdapter adapter = new OleDbDataAdapter();
adapter = new OleDbDataAdapter(command);
adapter.Fill(ds);
// close the connection
conn.Close();
bindingSource1.DataSource = ds.Tables[0];
dataGridView1.DataSource = bindingSource1;
// set the size of the dataGridView Columns
this.dataGridView1.Columns[0].Width = 10;
this.dataGridView1.Columns[1].Width = 100;
this.dataGridView1.Columns[2].Width = 100;
this.dataGridView1.Columns[3].Width = 100;
this.dataGridView1.Columns[4].Width = 176;
Any help and information is greatly appreciated.
Thanks Again,
T-SQL (SS2K8) :: How To Get Data Retrieved From Exec Function
Aug 14, 2014How can I get the data retrieved from the exec function below into Excel
DECLARE @columns NVARCHAR(MAX) ,
@columns_n NVARCHAR(MAX) ,
@sql NVARCHAR(MAX);
SET @columns = N'';
SET @columns_n = N'';
SELECT @columns += N', X.' + QUOTENAME(aaTrxDim)
[code]....
Can Sqldatasource Automatically Sort Retrieved Data From Stored Procedure ?
Jan 6, 2006Hi,
This is my problem :
I have listBox1, listBox2 controls bound to sqldatasource1 and sqldatasource2.
I wrote one stored procedure to retrieve data from my sql database like :
select Id, Name,Address,Amount from KalakaDB
Now I want my listBox1 to display Name By name and my listBox2 to display Amount by decrease order
how can i connect my sqldatacontrol to the stored procedure ?
Thanks
Reporting Services :: Display Columns When There Is No Data To Display
Apr 30, 2015I would like to display a portion of report where there is data or no data
There is data subreport display
Product Name Latex Gloves
Product ID
xxxx5678
There NO data in the subReport
Product Name
Product ID
Analysis :: Order Of Rows In Tabular Table Not In Same Order Data Was Retrieved?
May 19, 2015I never paid much attention to this before but I noticed this today in a new table I was creating.
For tables defined in the tabular model the table properties have something like SELECT Blah FROM TableName ORDER BY Blah Then in the tabular model the table's data is in the same order it was ordered by in the data source for the table.
I have a date table I setup and I noticed it is NOT respecting the sort order.
I have it sorted by DateID which sorts with the oldest date first and newest date as last row.However, the table that is imported and stored in the data model is not in that order.
I can of course manually sort the rows in BIDS/DataTools, but I find this discrepancy odd.
Would this have negative impacts on the EARLIER function for example if the data rows are not in the order specified?
Datagridview Problem
Feb 18, 2008Hi.
i created a small database with a table to store two numbers and the sum. num1,num2 and sum column. In sql i used the computed columns specification to assign sum as num1+num2.
running the database, everything works fine. i input the numbers and the sum is auto calculated.
i try to do same thing by bring the table in a vb 2008 form using a datagrid view. when i run the application i can just enter the two values(num1 and num2) in the datagrid but the sum is not calculated despite pressing enter or tab and also the data entered is not saved.
any help
Binding Multiple Sources To Datagridview
May 20, 2008Hello, I have a datagridview setup right now to display data from one table in my database. However, I am going to need it to pull certain columns from certain tables and put them all into one datagrid. The three tables are demographics, financial, and procedures. Can someone give me an example on how I'd go about doing this? I'm using vb.net.
The procedures table is a list of options that will be displayed in a combo box, depending on the option selected, other cells in the datagrid will be filled with certain data, this data is in the procedures table as well. All of this data will be alongside a customer id located in the demographics table, and will all be recorded into the financial table.
How Do I Insert Values Into CE From A DataGridView Row/rows?
Mar 19, 2007
Hi all... can someone tell me why this does not work and how to make it work????
SELECT SQLkey, CreateDateTime, Alias, PropDNumb, PropDRevNumb, PropDItem, PropDMfg, PropDCat, PropDList, PropDCost, PropDGMDollar, PropDGM,
PropDSellPrice, PropDXSellPrice, PropDItemTotal, PropDShipQty, PropDStatus, create_timestamp, update_timestamp, update_originator_id,
create_date
FROM ProposalDetail
INSERT INTO temp
(
SQLKey, CreateDateTime, Alias, PropDNumb, PropDRevNumb, PropDItem, PropDMfg, PropDCat, PropDList,
PropDCost, PropDGMDollar, PropDGM, PropDSellPrice, PropDXSellPrice, PropDItemTotal, PropDShipQty, PropDStatus,
create_timestamp, update_timestamp,update_originator_id, create_date
)
VALUES
(
'1', '3/20/2007 8:13:10 AM', 'SomeUser', 'b1', '4', '0761046', 'APP', 'Miscellaneous Options',
'54.000', '27.00', '27.00', '50.00', '54.00', '54.00', '54.00', '1', 'Active', '3/20/2007 8:13:10 AM', '3/20/2007 8:13:10 AM', '0',
'3/20/2007 8:13:10 AM'
)
WHERE (PropDNumb = 'b1') AND (PropDRevNumb = '1')
Thanks a ton!
Select The CheckBox Inside The DataGridView
Feb 29, 2008Hi,
Can anybody help me fetch "True" & "False" value from a CheckBox inside a DataGridView row.
I tried the following code:-
But the cell.Selected doesnot take the correct value.
objGrid = (System.Windows.Forms.DataGridView)controlObj[0];
foreach (DataGridViewRow row in objGrid.Rows)
{
DataGridViewCheckBoxCell cell = row.Cells[0] as DataGridViewCheckBoxCell;
if (cell.Value != cell.FalseValue)
{
if (cell.Selected == true)
{
///Some Code;
}
}
}
Kindly Help ASAP
Thanks
Queries With Different Statements - Show Results In Datagridview
Oct 19, 2015I have made a couple of queries I want to use into a Visual studio project, Now is my problem:
All my queries have different statements. I believe the best is to show the results in a Datagridview
How to view them there? I know how to do it... but I have got about 30 queries
Here is my code so far:
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
ComboBox1.DataSource = MyDB_DevDataSet.DataSetName.
Dim connectionString As String = "Data Source=myDBmySRV;Initial Catalog=Teknotrans_dev;Integrated Security=True"
Dim sql As String = "SELECT * FROM CompanyMain"
[Code] ....
DataGridView/SQL Express - Updating Record Using Seperate Form
Dec 7, 2006Hi,
I am currently using VC++/Cli 2005. In a project, I'm using a DataGridView control to show records from a SQL Express 2005 table. Instead of updating a specific item directly within DataGridView control, I would like to open a new form and allow user to update selected record/item within that form. The reason to update this way is conditionned by the fact that I have 3 levels of detail as following:
Level 0 Level 1 Level 2
1:N 1:N
Furniture --> Component --> Component
You all understand that update form of Level1 will/must include, as Level0 do, another DataGridView control to display/detail all related items issued from next level. This explains why I can't allow user to update Level 1 directly from DataGridView control.
I've searched in MSDN and even bought a few books on subject but unfortunately I found nothing on how to do it this way. All articles on DataGridView control were only showing how to update record directly from control.
My approach, I think, would be to transmit to my level1 updating form, as a single parameter, the selected DataRow object (or a brand new one if currently adding) issued from DataGridView and let user update it's content. When User finally leaves level0 update form, then I presume that DataGridView corresponding table would be automatically updated according to DataGridView's content.
What would be the proper way to do it? I would certainly appreciate to hear you view on this.
Also, what can I do if I want to refresh DataGridView's content when coming back from update form. Is it done automatically? I would certainly be sure that it reflects the reality, not only when I update it myself but also especially when other users could concurrently update same records?
Thanks in advance,
Stéphane
Can A Value Be Retrieved From An Insert?
Aug 12, 2005I need to return the "autoID" number that is created at the time of an insert. Is there way of doing that?
Thanks,
Ed
How Do You SUM The Fields Retrieved By COUNT?
Mar 15, 2004I am trying to do this in MS Access actually but it is an SQL question.
This query:
SELECT LoanNo, COUNT(LoanNo) AS 'Count'
FROM DedupTest031504
GROUP BY LoanNo
HAVING COUNT(LoanNo) > 1;
returns:
LoanNo Count
46690128 2
46861821 2
47762138 3
47762154 3
48257239 2
48257663 2
48257719 2
48258143 2
48258167 2
which is correct but how do you SUM the COUNT field? In other words, I want the total number of duplicate records in the table. Is there another way alltogether?
I tried:
SELECT LoanNo, SUM(COUNT(LoanNo))
FROM DedupTest031504
GROUP BY LoanNo
HAVING COUNT(LoanNo) > 1;
but I get a "CANNOT HAVE AGGREGATE FUNCTION IN 'SUM(COUNT(LoanNo))' error.
Thanks.
ddave
Increment The Retrieved Value Using @@identity
Jul 12, 2007hi,
i really need ur help..
I am creating an a stored procedure which could insert new records, the identity of the primary key in my table is not incremented. i want to increment the id when adding a new record in the stored procedure. what would be the system for that?
thanks
Funnyfrog
Security Context Could Not Be Retrieved
Mar 23, 2006some time back i had problem with sending the service broker messages on remote machine,
I had some security issues and they were resolved by the help of Remusu.
since the ip of the remote machine was changed in between so i just re-executed the same scrips which used to successfully send messages on the remote machine.(I just updated the IP in the route )
To my surprise same script did not work now where as no change have been made.
I am doing the following:
1.Created the certificate and end point on the sender side. back up the certificate in a file and copied to the other machine.
same step was repeated for receiving side as well.
2.both the side i created the certificates using the back up files from other sidend proper authorization
3.Then I created the database,route,messagetypes,contract,queues,services etc both the side.
4. then i setup dialog security(ie.created the dialog security certificates both the sides and back up them). Later I copied these back up files to each other, create some dialog user and create certificate using authorization to these remote dialog users created.
5.I also created remote service binding on both the sides and granted send permission to the remote dialog user.
When i send the message from sender to the receiver, and run the profiler, I see that on the sending side none of the broker event gives any error.
In the recever side I get the followng Event:
Broker:Message Undeliverable
This message could not be delivered because the security context could not be retrieved.
Error 11229.
I m surprised that the same script was run in the same order,Why was it running before and not now.
I also checked the End points using telnet and they seem to be fine. Also the firewall was "Off" on both the machines i.e. there was no change in system state also.
Please provide the solution. Thanks in advance.
Updating Retrieved Records SQL Problem
Feb 15, 2008Hello,
I am retriving records on a page, I am able to make changes cuase the data is displayed in textboxes, my question is how to save the changes I made in the database.
Also in my below code for retriving the data what statement do I need to add so that I can use a QuerryString to filter the results. ex (default.aspx?CID=1) and only records that
match that would display.
Here is my code: for retriving data
Private Sub displayrecord()SqlConnection1.Open() Dim SqlDataAdapter1 As New SqlDataAdapter("SELECT * FROM table1", SqlConnection1) Dim objReader As SqlDataReader Dim SqlCommand1 As New SqlCommand("SELECT * FROM table1", SqlConnection1) SqlDataAdapter1.Fill(dsMember) objReader = SqlCommand1.ExecuteReader() objReader.Read() txtbox_confirmpass.Text = objReader("MemberPassword") txtbox_name.Text = objReader("MemberName") txtbox_birthdate.Text = objReader("MemberDOB") txtbox_email.Text = objReader("MemberEmail") Dropdown_Gender.SelectedValue = objReader("Gender") objReader.Close() SqlConnection1.Close() End Sub
Private Sub btnUpdate_Click
Track All Records Retrieved From Search
Jun 29, 2004Hi,
I have a table full of items which can be searched.
I also have another table with the ID of each item and columns for no of times details shown, no of times saved etc.
What I would like to do is increment a value in this second table for each item every time it is returned in a search.
What would be the best way to do this?
(Im using a Stored Procedure)
Thanks in advance,
Pete
Saving The Rows Retrieved From Sql Svr 05 In Excel
May 17, 2008Hi,
I need to save all the rows that are retrieved from the sql server 2005 db into any external file such as excel.
Can any one give me any clue?
Gaurish Salunke
Software Developer
OPSPL
Wrong Record Retrieved After Move To SQL Svr
Jul 20, 2005I've moved the database tables from the .mdb file to Sql Svr and now I havean *intermittent* problem. When I select a record from a combo box, it willintermittently pull up the wrong record. The code that does the search isbelow. I have a column named 'ProsId' that is a unique number (identitycolumn). The error -- when it happens -- seems to only happen on higherProsId numbers. At first it appeared to me as some sort of data conversionthing, but I'm not so sure now. Here's some examples:Record selected Record actually displayed---------------- -------------------------100,000 41,85959,073 15,79457,000 11,27357,001 11,27445,000 45,000 <--- appears to return correctvalue every time. Numbers lower than this also seem to return the correctrecord every time.Private Sub cboFindProsName_AfterUpdate()' Find the record that matches the control.Dim rs As ObjectIf Len(Trim(Me.cboFindProsName.Text)) > 0 ThenSet rs = Me.Recordset.Cloners.FindFirst "[ProsId] = " & (Me![cboFindProsName])Me.Bookmark = rs.BookmarkEnd IfEnd SubMany Thanks!
View 5 Replies View RelatedEnd Conversation : Security Context Could Not Be Retrieved
Apr 13, 2007HI
I have a service broker setup between 2 remote server. The message send does get sent to the target, but I am having a problem where the end conversation message from the target is failing. I did a trace on both the target and the source server. here's what I found
On the Target Server:
on Broker: Message undeliverable --- This message could not be delivered because it is a duplicate
On the Source Server
on Broker: Message undeliverable --- This message could not be delivered because the security context could not be retrieved,
I do not understand why the message is delivered, but the end conversation message is not getting thru. On the Target transmission_queue. I have millions of messages like this
conversation_handle to_service_name is_end_of_dialog message_body transmission_status
E0C69E8F-37E9-DB11-AB7A-00145E7A209C source 1 NULL
I reinstalled the broker several times, but always get this problem.
thanks
Paul
Display Hirearchy Data Using Data Region
Jul 9, 2007I am trying to display hirearchical data using data region. For eg. the first level will be a list of customer names. The second level will be a list of Invoices under each customer. The third level will be a list of product names that were sold under each invoice.
I used a list for the data region and in each hireachy, there is a textbox in each list to display the data. I am trying to associate each data region with a datatable (I will provide the logic to populate the datatable with appropiate data). I do not want the ReportViewer to interact directly with a database because this is a 3 tier design and I am using the ReportViewer in local mode. I couldn't find any example of these. Can anybody help? Also I would like to see an example of the .rdlc file in these situation. Thanks very much.
Kam
SQL 2012 :: Query Becoming Slower When Records Are Retrieved?
Nov 10, 2014 Following is my db table
student_id student_code student_parent_id student_name
1 11 0 a
2 111 1 b
3 1111 2 c
4 11111 3 d
I want to generate following op
student_id student_code student_parent_id student_name Hierarchy
1 11 0 a 11
2 111 1 b 11-111
3 1111 2 c 11-111-1111
4 11111 3 d 11-111-1111-11111
Following is the query
i want to retrieve around 10000 in one go.. its taking around 8 seconds.. how to make it faster?
even if i retrieve 1 record or 10000 records, its taking around 8 seconds...
--- create table
create table test(sid bigint, scode nvarchar(50), parentid bigint, sname nvarchar(50))
---- insert records
insert into test values (1, '11', 0, 'a')
insert into test values (2, '111', 1, 'b')
insert into test values (3, '1111', 2, 'c')
insert into test values (4, '11111', 3, 'd')
---- result query
;WITH SInfo AS
(
SELECTsId
,scode
,ParentId
,sName
,CONVERT(nvarchar(800), scode) AS Hierarchy
[Code] .....
Login Failed - Catalog Information Cannot Be Retrieved
Jul 20, 2005When I try to connect to a MS Access 2000 database inenterprise Manager , i getan error "Login failed -Catalog information cannot be retrieved". I get thiserror message in a dialog box about 5 or 6 times. Thedatabase file location ends up in the file location box. Ican click "Test Connection" and the connection succeedswith a series of dialog boxes with the message "Loginfailed - Catalog information cannot be retrieved"Any help is appreciated greatly.--Posted via http://dbforums.com
View 2 Replies View Related2 Records Not Showing In Report But They Can Be Retrieved From DB Using Same SQL Statement
Jan 21, 2008Hi,
I have a report with 5 filters which can be applied to it. The records are grouped by the Rotation programme there are on, with a subtotal for each unique programme name.
The report seems to work fine, but upon closer inspection - we noticed that 2 of the records are not being displayed. As a result, the total count is out by 2.
We tracked down the missing records so I ran the SQL query with a Where clause, and it was able to find the two records.
What could possibly cause this behaviour? Please see included SQL statement :
Code Block
SELECT Posts.PostNumber,COUNT(Posts.PostNumber) AS RPCount, Incumbents.Name AS IncumbentName, Grades.GradeTitle, Specialties.SpecialtyTitle,
Hospitals.Name AS Hospital, Genders.Gender, [Incumbent History].YearGraduated, COUNT([University Origins].Origin) AS OriginCount,
Incumbents.Nationality AS NationalityID, Countries.[Country Name] AS Nationality, [Rotation Programmes].[Programme Name],
Posts.[Post Approved for Training], [University Origins].Origin, Posts.OldPostNumber, [Rotation Programmes].[Programme ID]
FROM Posts INNER JOIN
Incumbents ON Posts.PostNumber = Incumbents.PostNumber INNER JOIN
[Incumbent History] ON Incumbents.[Incumbent ID] = [Incumbent History].IncumbentID INNER JOIN
Grades ON Incumbents.[Official Grade] = Grades.GradeID INNER JOIN
Specialties ON Posts.Specialty = Specialties.SpecialtyID INNER JOIN
Hospitals ON Posts.HospitalID = Hospitals.[Hospital ID] INNER JOIN
Genders ON Incumbents.GenderID = Genders.GenderID INNER JOIN
Countries ON Incumbents.[Country Of Birth] = Countries.[Country ID] INNER JOIN
[Rotation Programmes] ON Posts.[Rotation Programme] = [Rotation Programmes].[Programme ID] INNER JOIN
[University Origins] ON [University Origins].[Uni Origin ID] = Incumbents.[University Origin]
GROUP BY [Rotation Programmes].[Programme Name], Posts.PostNumber, Incumbents.Name, Grades.GradeTitle, Hospitals.Name, Genders.Gender,
[Incumbent History].YearGraduated, [University Origins].Origin, Incumbents.Nationality, Countries.[Country Name], [University Origins].Origin,
Posts.[Post Approved for Training], Posts.OldPostNumber, Specialties.SpecialtyTitle, [Rotation Programmes].[Programme ID]
Login Failed - Catalog Information Cannot Be Retrieved
Aug 26, 2008I am trying to connect to a SQL database on a Windows Server 2003 machine via a Microsoft Data Link on an XP machine.
I select Microsoft OLE DB Provider for SQL Server on the provider tab of the Data Link.
On the connection tab I input the IP of the server and select "Use Windows NT Integrated securty"
However when I test the connection I get the following errors:
[DBNETLIB][ConnectionOpen(COnnect()).]SQL Server does not exist or access denied.
followed by the error: "Login failed. Catalog information cannot be retrieved"
The firewalls on both machines have been dropped but this did not work. The XP machine can ping the Server 2003 machine and connect to a C$ share.
I am using SQL Server Express 2005 on the Server. I can connect to the database using SQL Server Management Studio Express on the server. However the XP client machine is not having any luck connecting via the Microsoft Data Link.
New To Stored Procedures: Where To Find The Recordset Retrieved?
Aug 8, 2006Hi,
This may be a really silly question, but I am starting to experiment with stored procedures for the first time and I am not really sure about how they work. I am working in SQL Server Management Studio Express...
When putting a SELECT query statement into a stored procedure and executing it, how or where can you get or find the actual record set supposedly retrieved?
Thanks for any help..
--------------------------set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [petrander].[DynamicQuery] @taxparent int = 1ASBEGIN SET NOCOUNT ON; SELECT ID, TaxonID, Taxon FROM QueryView WHERE ParentID1 = COALESCE(@taxparent, ParentID1) AND ParentID2 = COALESCE(@taxparent, ParentID2) AND ParentID3 = COALESCE(@taxparent, ParentID3) AND ParentID4 = COALESCE(@taxparent, ParentID4) AND ParentID5 = COALESCE(@taxparent, ParentID5) AND ParentID6 = COALESCE(@taxparent, ParentID6) AND ParentID7 = COALESCE(@taxparent, ParentID7) AND ParentID8 = COALESCE(@taxparent, ParentID8)END
Dattime Format Problems When Retrieved On FreeBSD Server
Feb 25, 2007I'm using MSSQL with PHP and this works fine on a Windows server.
When i move to a FreeBSD server, the date formatting is not working.
FreeBSD retrieves the date as: mon dd yyyy hh:mi:ss:mmmAM - and php's functions for formatting date fails.
I've tried using: Convert(varchar(10), Date, 103) AS Date, and the date is formatted fine - BUT sorting on date does NOT work.
Are there any way i can do changes to datetime behaviour on server side? I NEVER wants the date in mon dd yyyy hh:mi:ss:mmmAM. I don't need milliseconds, and i want 24h format - not AM/PM. Are there any settings on the SQL server for this?
Suppress Report Printing If No Rows Retrieved From Database Server
Sep 5, 2007Hi,
In Crystal Reports, you could suppress the printing of a report if no rows were retrieved from the database server (ie: zero pages would be sent to the printer). This was done by opening the Report Properties dialog in the report designer and setting the "Suppress Printing if No Records" to true.
Is there a way I can reproduce this behavior in SQL 2005 Reports?
Thanks!
Stephen
SELECT Statement With Two Retrieved Columns Originating From The Same Dbase Fields
Jul 20, 2006Hello,
I've been busy all night searching and reading trying to figure out how I can do the following.
I have a table that tracks user IDs in multiple fields. When I select
records from this table I need a way to resolve those ID fields back
into user names by referencing the users table. SQL statement thus
far...
SELECT A.Username as NameA, B.Username As NameB, FROM theTable, Users As A, Users As B WHERE theTable.UserIDA ???
How do I resolve theTable.UserIDA and theTable.UserIDB back to
Users.Username so that the records returned fill the fields NameA and
NameB?
Your help is greatly appreciated.
Thanks,
-Mike
Display Data From Database
Oct 10, 2006I've always bound data to a dataset...how do I display data without a dataSet? This is how i usually display data... SqlConnection myConnection = new SqlConnection(conn); string sqlQuery = "SELECT * FROM questions"; SqlDataAdapter myCommand = new SqlDataAdapter(sqlQuery, myConnection); DataSet ds = new DataSet(); myCommand.Fill(ds, "questions"); MyDataGrid.DataSource = ds.Tables["questions"].DefaultView; MyDataGrid.DataBind(); <%# DataBinder.Eval(Container.DataItem, "answer3")%>
View 1 Replies View RelatedDisplay Data Without Binding
May 26, 2006Hi All
I am new to VS 2005 and ASP.NET. I used to use Dreamweaver to design but now I am trying VS.
What I want to do is to display data retrieved with a SqlDataSource in a web page. I know how to do it by binding it to the various controls (Grid, DataList, DetailsView, FormView, Repeater.) available but how can I display it without using any of the mentioned (Grid, DataList, DetailsView, FormView, Repeater)?
Any help apprecited.