How To Do Update Of Select Columns Based On...
Jun 21, 2007
the following criteria.
i have the selection all done but am trying to figure out how to do the following:
if column4 < 0 then add column4 to column3, move 0 to column4;
if column3 < 0 then add column3 to column2, move 0 to column3;
if column2 < 0 then add column2 to column1, move 0 to column2;
add column3 to column4;
move column2 to column3;
move column1 to column2;
if column0 > 0 move column0 to column1, move 0 to column0 else move 0 to column1;
these are all numeric data types.
View 7 Replies
ADVERTISEMENT
Apr 8, 2008
I have 4 rows below in file tblTEST, and I want to be able to transfer the CODE from the MAIN location to the INT location (replacing all existing "A" codes), preceeded by an "I".
ID LOC CODE
-- ----- ------
11 MAIN B
11 INT A
22 MAIN C
22 INT A
I want the result to be:
ID LOC CODE
-- ----- ------
11 MAIN B
11 INT IB
22 MAIN C
22 INT IC
I am stumped as to how to do this - any help or advice would be appreciated.
The only thing I've come up with is:
UPDATE S
SET s.code = B.code
FROM tbltest B
LEFT OUTER JOIN tbltest S ON B.id = S.id
WHERE (S.loc = 'INT')
But when I run it, it says "0 rows affected".
View 5 Replies
View Related
Apr 23, 2008
I have built an Advanced Search page which allows users to select which columns to return (via checkbox) and to enter search criteria for any of the selected columns (into textboxes). I build the SQL statement from the properties of the controls. Works great.
My problem is getting my gridview control to play nicely. At first I used a SqlDataReader and bound the gridview to it, thus giving me the ability to run new SQL statements through it (with different columns each time). Worked nicely. But, per Microsoft, sorting can only be done if the gridview is bound to a datasource control like the SqlDataSource. So I wrote the code to handle sorting. No big deal; worked nicely. But I could not adjust the column widths programmatically unless bound to a datasource control like the SqlDataSource. And could not figure out a work around.
So, I decided to use the SqlDataSource. Works great. Except, I cannot figure out how to run a new SELECT statement through the SQLDataSource and have the gridview respond accordingly. If I try to return anything other than the exact same columns defined declaratively in the html, it pukes. But I need to be able to return a new selection of columns each time. For example, first time through the user selects columns 1,2,3,4 – the gridview should show those 4 columns. The second time the user selects columns 2,5,7 – the gridview should those 3 columns (and ONLY those 3 columns). Plus support selection and sorting.
I am desperate on this. I've burned 2.5 days researching and testing. Does anyone have any suggestions?
Thanks,
Brad
View 9 Replies
View Related
Oct 31, 2014
‘Trying to SELECT INTO a new table all columns of a table based on a DISTINCT value of one column so for example:
SELECT *
INTO new_table
FROM old_name
WHERE old_table.column IS DISTINCT’
View 4 Replies
View Related
Jul 31, 2015
I have a table #vert where I have value column. This data needs to be updated into two channel columns in #hori table based on channel number in #vert table.
CREATE TABLE #Vert (FILTER VARCHAR(3), CHANNEL TINYINT, VALUE TINYINT)
INSERT #Vert Values('ABC', 1, 22),('ABC', 2, 32),('BBC', 1, 12),('BBC', 2, 23),('CAB', 1, 33),('CAB', 2, 44) -- COMBINATION OF FILTER AND CHANNEL IS UNIQUE
CREATE TABLE #Hori (FILTER VARCHAR(3), CHANNEL1 TINYINT, CHANNEL2 TINYINT)
INSERT #Hori Values ('ABC', NULL, NULL),('BBC', NULL, NULL),('CAB', NULL, NULL) -- FILTER IS UNIQUE IN #HORI TABLE
One way to achieve this is to write two update statements. After update, the output you see is my desired output
UPDATE H
SET CHANNEL1= VALUE
FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER
WHERE V.CHANNEL=1 -- updates only channel1
UPDATE H
SET CHANNEL2= VALUE
FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER
WHERE V.CHANNEL=2 -- updates only channel2
SELECT * FROM #Hori -- this is desired output
my channels number grows in #vert table like 1,2,3,4...and so Channel3, Channel4....so on in #hori table. So I cannot keep writing too many update statements. One other way is to pivot #vert table and do single update into #hori table.
View 5 Replies
View Related
Jul 14, 2014
I have a table that holds notes for item's. I'm want to do a select statement where one of my columns assigns a sequential value to each row based on the item number. Would like data to look like this where doc_no would be my row_number function:
item_no seq_no note doc_no
ABC 1 blah 1
ABC 2 blahh 1
ABC 3 bla3 1
XYZ 1 more n 2
XYZ 2 another 2
EFG 1 blahhh 3
View 2 Replies
View Related
Apr 6, 2008
Using SQL Server 2005 Express:
I'd like to know how to do a SELECT Query using the following tables:
Miles Table:
Date/Car/Miles/MilesTypeID
===============
(some date)/Ford/20/1
(some date)Ford/20/2
(some date)Chevy/30/1
(some date)Toyota/50/3
(some date)Ford/30/3
Miles Type Table
MilesTypeID/MilesType
=================
1/City
2/Highway
3/Off-Road
I'd like the results to be like this:
Date/Car/City Miles/Highway Miles/Off-Road Miles
=====================================
(date)-Ford-20-0-0
(date)-Chevy-0-20-0
(date)-Ford-20-0-0
(date)-Toyota-0-0-50
(date)-Ford-0-0-30
Anyone? Thanks in advance!
View 3 Replies
View Related
Jul 24, 2015
Update statement based on the results from this SELECT:
SELECT RELQ_REL_VERSION_NM,
RELQ_RELEASE_Q_ID,
RELQ_STATUS_CD,
RELSP_RELEASE_STEP_ID,
RELSP_STEP_TYPE_CD,
RELSP_STATUS_CD
FROM RELEASE_QUEUE WITH (NOLOCK)
[Code] ....
I need to update all records where the
RELEASE_STEPS.RELSP_STATUS_CD = 'SKPD'TORELEASE_STEPS.RELSP_STATUS_CD = 'CMPS'
I imagine that the UPDATE statement will be something like:
UPDATE RELEASE_STEPS SET dbo.RELEASE_STEPS.RELSP_STATUS_CD = 'CMPS'
WHERE (
SELECT RELQ_REL_VERSION_NM,
RELQ_RELEASE_Q_ID,
RELQ_STATUS_CD,
RELSP_RELEASE_STEP_ID,
RELSP_STEP_TYPE_CD,
[Code] .....
View 4 Replies
View Related
Jan 3, 2006
I have a GridView dispalying from a SQLServerDataSource that is using a SQL Select Union statement (like the following):
SELECT FirstName, LastNameFROM MasterUNION ALLSELECT FirstName, LastNameFROM CustomORDER BY LastName, FirstName
I am wondering how to create Update and Insert statements for this SQLServerDataSource since the select is actually driving from two different tables (Master and Custom). Any ideas if or how this can be done? Specifically, I want the Custom table to be editable, but not the Master table. Any examples or ideas would be very much appreciated!
Thanks,
Randy
View 5 Replies
View Related
Feb 14, 2008
hi !!!!!!!!!!!!!!!!!!!!!!!
I have 3 tables
let say Employee,Employee_temp,emp_approval
i want to update employee table by selecting columns from employee_temp
i do that using oracle but i want it using sql server 2000
Sample syntax Below: for oracle
update employee e set (col1,col2,col3,col4)=
(select t1.col1,t1.col2,t1.col3,t1.col4 from employee_temp t where t.col1=:new.col1) where e.col1=:new.col1
this syntax for oracle....
plsease provide sql 2000 syntax and sql 2005 syntax please.........
thank you.
View 6 Replies
View Related
Jul 20, 2005
I need to send the result of a procedure to an update statement.Basically updating the column of one table with the result of aquery in a stored procedure. It only returns one value, if it didnt Icould see why it would not work, but it only returns a count.Lets say I have a sproc like so:create proc sp_countclients@datecreated datetimeasset nocount onselect count(clientid) as countfrom clientstablewhere datecreated > @datecreatedThen, I want to update another table with that value:Declare @dc datetimeset @dc = '2003-09-30'update anothertableset ClientCount = (exec sp_countclients @dc) -- this line errorswhere id_ = @@identityOR, I could try this, but still gives me error:declare @c intset @c = exec sp_countclients @dcWhat should I do?Thanks in advance!Greg
View 4 Replies
View Related
Jan 9, 2015
Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
View 4 Replies
View Related
Jun 27, 2007
I have query which retrieves multiple column vary from 5 to 15 based on input parameter passed.I am using table to map all this column.If column is not retrieved in the dataset(I am not talking abt Null data but column is completely missing) then I want to hide it in my report.
Can I do that??
Any reply showing me the right way is appricited.
-Thanks,
Digs
View 3 Replies
View Related
Aug 12, 2014
MS SQL 2008 R2
I have the following effectively random numbers in a table:
n1,n2,n3,n4,SCORE
1,2,5,9,i
5,20,22,25,i
6,10,12,20,i
I'd like to generate the calculated column SCORE based on various scenarios in the other columns. eg.
if n1<10 and n2<10 then i=i + 1
if n4-n3=1 then i=i + 1
if more than 2 consecutive numbers then i=i + 1
So, I need to build the score. I've tried the procedure below and it works as a pass or fail but is too limiting. I'd like something that increments the variable @test1.
declare @test1 int
set @test1=0
select top 10 n1,n2,n3,n4,n5,n6,
case when (
n1=2 and
n2>5
)
then @test1+1
else @test1
end as t2
from
allNumbers
View 5 Replies
View Related
Aug 4, 2015
I have a report that uses different datasets based on the year selected by a user.
I have a year_id parameter that sets a report variable named dataset_chosen. I have varified that these are working correctly together.
I have attempted populating table cell data to display from the chosen dataset. As yet to no avail.
How could I display data from the dataset a user selects via the year_id options?
View 4 Replies
View Related
Aug 16, 2007
Dear All
I need to cerate a SP that SELECTS all the records from a table WHERE the first letter of each records starts with 'A' or 'B' or 'C' and so on. The letter is passed via a parameter from a aspx web page, I was wondering that someone can help me in the what TSQL to use I am not looking for a solution just a poin in the right direction. Can you help.
Thanks Ross
View 3 Replies
View Related
Apr 29, 2015
I have a business need to create a report by query data from a MS SQL 2008 database and display the result to the users on a web page. The report initially has 6 columns of data and 2 out of 6 have JSON data so the users request to have those 2 JSON columns parse into 15 additional columns (first JSON column has 8 key/value pairs and the second JSON column has 7 key/value pairs). Here what I have done so far:
I found a table value function (fnSplitJson2) from this link [URL]. Using this function I can parse a column of JSON data into a table. So when I use the function above against the first column (with JSON data) in my query (with CROSS APPLY) I got the right data back the but I got 8 additional rows of each of the row in my table. The reason for this side effect is because the function returned a table of 8 row (8 key/value pairs) for each json string data that it parsed.
1. First question: How do I modify my current query (see below) so that for each row in my table i got back one row with 19 columns.
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*
FROM PRODUCT A
CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B
If updated my query (see below) and call the function twice within the CROSS APPLY clause I got this error: "The multi-part identifier "A.ITEM6" could be be bound.
2. My second question: How to i get around this error?
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*, C.*
FROM PRODUCT A
CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B, fnSplitJson2(A.ITEM6,NULL) C
I am using Microsoft SQL Server 2008 R2 version. Windows 7 desktop.
View 14 Replies
View Related
Aug 27, 2014
I'd like to first figure out the count of how many rows are not the Current Edition have the following:
Second I'd like to be able to select the primary key of all the rows involved
Third I'd like to select all the primary keys of just the rows not in the current edition
Not really sure how to describe this without making a dataset
CREATE TABLE [Project].[TestTable1](
[TestTable1_pk] [int] IDENTITY(1,1) NOT NULL,
[Source_ID] [int] NOT NULL,
[Edition_fk] [int] NOT NULL,
[Key1_fk] [int] NOT NULL,
[Key2_fk] [int] NOT NULL,
[Code] .....
Group by fails me because I only want the groups where the Edition_fk don't match...
View 4 Replies
View Related
Sep 10, 2007
I am working on a Statistical Reporting system where:
Data Repository: SQL Server 2005
Business Logic Tier: Views, User Defined Functions, Stored Procedures
Data Access Tier: Stored Procedures
Presentation Tier: Reporting ServicesThe end user will be able to slice & dice the data for the report by
different organizational hierarchies
different number of layers within a hierarchy
select a organization or select All of the organizations with the organizational hierarchy
combinations of selection criteria, where this selection criteria is independent of each other, and also differeBelow is an example of 2 Organizational Hierarchies:
Hierarchy 1
Country -> Work Group -> Project Team (Project Team within Work Group within Country)
Hierarchy 2
Client -> Contract -> Project (Project within Contract within Client)Based on 2 different Hierarchies from above - here are a couple of use cases:
Country = "USA", Work Group = "Network Infrastructure", Project Team = all teams
Country = "USA", Work Group = all work groups
Client = "Client A", Contract = "2007-2008 Maint", Project = "Accounts Payable Maintenance"
Client = "Client A", Contract = "2007-2008 Maint", Project = all
Client = "Client A", Contract = allI am totally stuck on:
How to implement the data interface (Stored Procs) to the Reports
Implement the business logic to handle the different hierarchies & different number of levelsI did get help earlier in this forum for how to handle a parameter having a specific value or NULL value (to select "all")
(WorkGroup = @argWorkGroup OR @argWorkGrop is NULL)
Any Ideas? Should I be doing this in SQL Statements or should I be looking to use Analysis Services.
Thanks for all your help!
View 1 Replies
View Related
Feb 3, 2008
I know this may have been asked before but can someone pls hel mw out here. i even tried to use the Crosstab SP that i found out on this site but it is not for what i need.
I have a Table/View called [Shipment] with the data below.
ShipNo Supplier
=================
1 CFA
1 TFA
2 LRA
2 LRB
3 ABC
4 TFA
I want the following as my result.
ShipNo Supplier1 Supplier2
==========================
1 CFA TFA
2 LRA LRB
3 AB
4 TFA
Thx.
Rav
View 6 Replies
View Related
May 28, 2008
Hello.
I have three INT columns in a table that record the users birth year, month, and day.
BDAY_DAY (INT)
BDAY_YEAR (INT)
BDAY_MONTH (INT)
I'd like to include a function in my query that will return their Age in years based on these three columns.
I found this function on the internets, but I'm not sure how to build a DATETIME object using the three int date columns to pass to the function. If you could help me there it'd be most appriciated.
Create FUNCTION dbo.GetAge (@DOB datetime, @Today Datetime) RETURNS Int
AS
Begin
Declare @Age As Int
Set @Age = Year(@Today) - Year(@DOB)
If Month(@Today) < Month(@DOB)
Set @Age = @Age -1
If Month(@Today) = Month(@DOB) and Day(@Today) < Day(@DOB)
Set @Age = @Age - 1
Return @AGE
End
Usage (how do i pass the three columns into this function??)
SELECT Last_Name, First_Name, ssn, dob
FROM Employee_Data e (nolock)
WHERE Cust_Id = 'Customer1'
and dbo.GetAge(e.Date_Of_Birth, getdate()) >= 21
View 3 Replies
View Related
Jun 9, 2008
I'll show my schema first, then I'll explain what I'm doing:
--------------------------------------------------
Events
--------------------------------------------------
ID | E_Title
--------------------------------------------------
--------------------------------------------------
EventOptionGroups
--------------------------------------------------
ID | EOG_EventID | EOG_OptionGroupID
--------------------------------------------------
--------------------------------------------------
OptionGroups
--------------------------------------------------
ID | OG_Title
--------------------------------------------------
--------------------------------------------------
Options
--------------------------------------------------
ID | O_OptionGroupID | O_Description
--------------------------------------------------
--------------------------------------------------
EventRegistration
--------------------------------------------------
ID | ER_EventID | ER_Name
--------------------------------------------------
--------------------------------------------------
RegistrantOptions
--------------------------------------------------
ID | RO_EventRegistrationID | RO_OptionGroupID | RO_Selection
--------------------------------------------------
There are several events. Each event has several different sessions (stored in EventOptionGroups), and each session has a certain number of options (stored in Options).
A user can sign up for an event, and their information is stored in EventRegistration. They can choose an option for each session in the event. For each option they choose, a new row is added to RegistrantOptions.
For each row in EventRegistration, I want to output the user's information, and then the option they chose for each session in the event. Like this:
----------------------------------------------------------------------
E_Title | ER_Name | OG_Title1 | OG_Title2 | OG_Title3
----------------------------------------------------------------------
Event | Bob | O_Description1 | O_Description2 | O_Description3
So in that example, that event had 3 sessions.
Right now, I can only output E_Title and ER_Name, I don't know how to output the session information
View 2 Replies
View Related
Dec 19, 2013
Product IdIsPrimaryQuantity
P0011
P001.102
P001.204
P001.305
P0021
P002.106
P002.207
P002.309
P002.4010
P002.5011
Need the query for result each group shows multiplied value of group quantity and last row of the group is shown with NULL
Product IdSubProductQuantity
P001 40
P001 P001.3NULL
P002 41580
P002 P002.5NULL
This is same as [URL] ....
View 5 Replies
View Related
Sep 10, 2014
I’m trying to figure out a way to sum columns for similar IDs, based on the contents of a single field. For example, if I’m calculating attendance percentages for students, and codes P and T count as Present, and codes A and E count as Absent, I would want to total Present and Absent codes separately, in their own columns. I would then like to use those totals to calculate percentage, but I can do that. It’s the SUM based on column value (by ID) that is giving issue.
If I have the following view:
IDLNFNCDTotal
123456MearsBenP12
123456MearsBenA2
123456MearsBenT6
234567NortonSusanP15
234567NortonSusanA2
234567NortonSusanT2
234567NortonSusanE1
I would like something like this:
IDLNFNPresentAbsentPercentage
123456MearsBen18290.0
234567NortonSusan17385.0
I’ve been playing around with nested queries, but nothing’s working. This is a glimpse of the mess that I’ve created trying to sort this out. Many errors.
I just noticed that I used a simpler example than the SQL I included, so I modified it a bit. There are additional fields that I'll need to include, but I want to get the logic working correctly. From there, I can handle the rest. So here's a more appropriate code example showing the direction I'm trying to go with this.
SELECT ID, [Last Name], [First Name], CD, Present, Absent, CAST(LEFT(Present / (Absent + Present) * 100, 5) AS varchar) + '%' AS Percentage
FROM (SELECT ID, CD, TotalAHD, CAST
((SELECT SUM(TotalAHD) AS Expr1
FROM SumAHDforAttndPercentages AS p
[Code] ...
View 2 Replies
View Related
Oct 15, 2007
Newbie alrt...
I am trying to create an asp page that will update an Access 2000 database. I need to update records if the user exists and create a new record if the user does not exist. Most of the variables are pulled from a separate "post" form.
I am using 2 pieces of info to find duplicates, as employee numbers can be assigned to multiple employees. Right now I have the page check for a duplicate employee id number then check for a duplicate last name. Unfortunately it is running each check separately, so if the last name is duplicated anywhere, it is sending a duplicated value.
here is the chunk of code in question... all RF_variables are request.form variables
cnt="SELECT COUNT(emp_id) AS Xnum FROM " & RF_course
cnt=cnt & " WHERE emp_id='" & RF_emp_id & "'"
set again=conn.Execute(cnt)
dup=again("Xnum")
if dup>=1 then
cnt="SELECT COUNT(lname) AS Xnum FROM " & RF_course
cnt=cnt & " WHERE lname='" & RF_lname & "'"
set again=conn.Execute(cnt)
dupl=again("Xnum")
if dupl=1 then
upd="UPDATE " & RF_course & " SET "
upd=upd & "section" & RF_section & "='" & RF_score & "'"
upd=upd & " WHERE emp_id='" & RF_emp_id & "'"
upd=upd & " AND lname='" & RF_lname & "'"
on error resume next
conn.Execute upd
else
ins="INSERT INTO " & RF_course
ins=ins & " (lname,fname,emp_id,cname,"
ins=ins & "section" & RF_section & ")"
ins=ins & " VALUES "
ins=ins & "('" & RF_lname & "',"
ins=ins & "'" & RF_fname & "',"
ins=ins & "'" & RF_emp_id & "',"
ins=ins & "'" & RF_cname & "',"
ins=ins & "'" & RF_score & "')"
on error resume next
conn.Execute ins
end if
else
ins="INSERT INTO " & RF_course
ins=ins & " (lname,fname,emp_id,cname,"
ins=ins & "section" & RF_section & ")"
ins=ins & " VALUES "
ins=ins & "('" & RF_lname & "',"
ins=ins & "'" & RF_fname & "',"
ins=ins & "'" & RF_emp_id & "',"
ins=ins & "'" & RF_cname & "',"
ins=ins & "'" & RF_score & "')"
on error resume next
conn.Execute ins
end if
Hopefully this is understandable.
If anyone can offer any help I would greatly appreciate it.
Thanks
View 1 Replies
View Related
Sep 13, 2007
I am writing a fairly simple sql, and I would like to write something like
Code Snippet
select
firstname as firstname,
case
when firstname = 'Peter' then 'yes'
else
'no'
end as whatever
from
MyTable
where
whatever = 'yes'
And this should then select out the rows where column number 2 is 'yes'.
It doesn't work, and I have to copy the firstname = 'Peter' into the where clause.
But why?
View 4 Replies
View Related
Mar 18, 2007
Hi there, im still learning SQL so thanks in advance.I have a table with columns of customer's information, [customerID], [customerFirst], [customerLast], , [program] ... other columns ... There will be entries where there can be duplicate customerFirst and customerLast names. I would like to just return a single entry of the duplicate names and all associated row information. IE: [customerID], [customerFirst], [customerLast], [ email], [program] 01 Bill Smith bill.smith@hotmail.com ymca 02 Bill Smith bill.smith@hotmail.com Sports 03 jon doe jon.doe@hotmail.com AAA 04 jon doe jon.doe@hotmail.com Ebay 05 Paul Sprite paul.sprite@hotmail.com Rec Desired Returned result: 01 Bill Smith bill.smith@hotmail.com ymca 03 jon doe jon.doe@hotmail.com AAA
05 Paul Sprite paul.sprite@hotmail.com Rec So in my code i have this:dAdapter = new SqlDataAdapter("SELECT * FROM [Poc_" + suffix + "] WHERE (SELECT DISTINCT [CustomerLastName], [CustomerFirstName], [CustomerEmail] FROM [Poc_" + suffix + "])", cnStr); dAdapter.Fill(pocDS, "Data Set"); However this is throwing up an error when i build the app: An expression of non-boolean type specified in a context where a condition is expected, near ')'.
Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException:
An expression of non-boolean type specified in a context where a
condition is expected, near ')'.
Source Error:
Line 52: //dAdapter = new SqlDataAdapter("SELECT DISTINCT * FROM [Poc_" + suffix + "] ORDER BY [CustomerLastName]", cnStr); Line 53: dAdapter = new SqlDataAdapter("SELECT * FROM [Poc_" + suffix + "] WHERE (SELECT DISTINCT [CustomerLastName], [CustomerFirstName], [CustomerEmail] FROM [Poc_" + suffix + "])", cnStr); Line 54: dAdapter.Fill(pocDS, "Data Set");Line 55: Line 56: //Dataset for name comparison 1: Can someone explain to me why this error is happening?2: Can soemone confirm that my intentions are correct with my code?3: If I'm completely off, can someone steer me in the right direction?Thanks alot!-Terry
View 12 Replies
View Related
Mar 6, 2014
I have two columns which needs to repeat based on ID and number of distinct rows in that ID.
ID Date Created
1 1/1/2012 Sudheer
1 1/2/2013 Sudheer
1 3/3/2013 Sudheer
2 1/2/2014 Veera
2 2/5/2015 Veera
Results
ID Date Created Date Created Date Created
1 1/1/2012 Sudh 1/2/2013 Sudh 3/3/2013 Sudh
2 1/2/2014 Veera 2/5/2015 Veera
View 3 Replies
View Related
Jun 20, 2014
This is the logic I need to incorporate in to sql
if the getdate() < term start date then R
if the getdate() > term date date and getdate() < term end date then C
if the getdate() > term end date then H
I have come up with the following type of case statement that will allow me to determine the first two values (to a degree), however , I need to evaluate the end date as well.
Is there a way to look at multiple columns in a case statement?
CASE
WHEN DATEDIFF(DD,GETDATE(),TRM_BEGIN_DTE) >0 THEN 'R' else 'C' end
View 5 Replies
View Related
Feb 25, 2015
I am trying to take the results of a query and re-orient them into separate columns.
select distinct
W_SUMMARYDETAILS.FACILITY_ID,
W_SUMMARYDETAILS.REPORTING_YEAR, (2011 - 2014, I want these years broken out into columns for each year)
W_SUMMARYDETAILS.FACILITY_NAME,
W_DEF_SUMMARYDETAILS.REPORTING_PERIOD (2011 - 2013, I want these years broken out into columns for each year)
From W_SUMMARYDETAILS
full outer join W_DEF_SUMMARYDETAILS
on W_SUMMARYDETAILS.FACILITY_ID=W_DEF_SUMMARYDETAILS.FACILITY_ID and
W_SUMMARYDETAILS.REPORTING_YEAR=W_DEF_SUMMARYDETAILS.REPORTING_PERIOD
As of now the query puts all the years into a single column -- one for DEF_SUMMARY and another for SUMMARY.
I am looking to create 7 additional columns for all the individual years in the results instead of just two columns.
View 9 Replies
View Related
Aug 15, 2015
I have a requirement to Insert Column 1 and Column 2 based on below condition only. Looking for a Store procedure or query
Condition : Allow Insert when column 1 and Column 2 have same values on 2nd row insert. But should not allow insert when Column 2 value is different.
ALLOW INSERT:
Column1 Column2
A0007 12-Aug
A0007 12-Aug
A0007 12-Aug
DONOT ALLOW INSERT: (COLUMN1 ID should not allow different dates)
Column1 Column2
A0007 23-Mar
A0007 02-Feb
FINAL OUTPUT Should be
Column1Column2
A000712-Aug
A000712-Aug
A000712-Aug
B000220-Jun
B000220-Jun
C000330-Sep
Discard Insert when Column1 ID's comes with Different dates.
View 4 Replies
View Related
Aug 12, 2013
I have a database that has a table that contains basic demographics
•First_name
•Last_name
•Address
•City
•State
•Zip phone
•email
•dob
•etc
•etc
Contained in this table are a lot of duplicate names, and even different addresses. I would like to return an entire row of UNIQUE information based upon “first_name + last name”. Now I know just enough of sql to pull out unique first + last names, but not the entire row based upon this unique information.
View 5 Replies
View Related
Jan 30, 2015
My requirement is below.enhancing the T- sql query as I was told not to use SSIS.
Insert data from Table A to Table B with conditions:
1. Truncate gender to one character if necessary.
2. Convert character fields to uppercase as necessary.
3. For systems that supply both residential and mailing addresses, use the residential address if available (both street_address and zip fields have value), mailing address otherwise.
In SSIS I took conditional split with 'ISNULL(res_street_address) == TRUE || ISNULL(res_zip) == TRUE '
default outputname :Consider Res Address; Outputname:Consider mail address.
and mapped as:
(Table A) mail_street_address---street address(Table B)
(Table A) mail_city----------------City(Table B)
(Table A) mail_Zip----------------Zip(Table B)
(Table A) mail_state-------------state(Table B)
(Table A) res_street_address--street address(Table B)
(Table A) res_city---------------City(Table B)
(Table A) res_Zip----------------Zip(Table B)
(Table A) res_state--------------state(Table B)
I want to do the same with T-sql code too:
I came up with below T-SQl but unable to pick(street,city,state,zip columns as I have take combination of street and zip from Table A not individual columns as I wrote in below query) based on above condition(3):
Insert into TABLE B
SELECT
Stats_ID
,UPPER(first_name) first_name
,UPPER(middle_name )middle_name
,UPPER(last_name) last_name
,UPPER(name_suffix) name_suffix
[code]....
View 2 Replies
View Related
