Hello guys,
I would like to know how to enable remote connections to my SQLExpress installation? Thank you very much for any help!
Regards,
Fabian
my favorit hoster is ASPnix : www.aspnix.com !
How to enable remote connections by code without "SQL Server Surface Area Configuration" ,implement by .net framework?
View 1 Replies View RelatedHi guys
Apologies if this is the wrong place to be posting this but I have posted on a few forums and have not had any usable answers to this question, so I am hoping you guys will be able to help me.
I have 2 servers that are on the same domain. My ASP.NET application is running off the first which has .NET 2.0 installed, and I have an SQL Server 2000 db on the other. Whenever I try to connect I get the following error:An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
The connection works when I run the project in VS Development Server on my work computer, but as soon as I upload to the server I get this error.
I have scoured Google but all of the sites I come across are for SQL Server 2005 and are just not suitable for solving the issue on 2000.
Any help would be greatly appreciated as I cannot continue my current project until this issue is resolved.
Hermiod
The option:
SQL Server Configuration Manager>SQL Server Network Configuration>Protocol for SQL_xxx (right click)>Properties, we can see two Tabs:
Tab 1: Flags
Tab 2: Certificate
If I set the value of Hide Instance= Yes, does "Force Enctyption", need to be set YES as well?Â
Or Force Enctyption has to be enabled in order to hide instance?
What is the recommend settings?
[URL]
Fellow Devs,
I have an instance of SQL Server Express 2005 running on another box and I have Remote Connections enabled over both TCP/IP and Named Pipes, but on my other box I keep getting the error that the server does not accept Remote Connections.
Any ideas why this might be happening? Is there some other configuration?
How does one enable sql connections limits for user connections per new and existing databases? how to do it on whole server per database but not set a limit per user.Looks like this must be run on each databases but what if you have 100s of databases:
USE AdventureWorks2012 ;
GO
EXEC sp_configure 'show advanced options', 1;
GO
RECONFIGURE ;
GO
EXEC sp_configure 'user connections', 325 ;
GO
RECONFIGURE;
GO
HiI'm going insane.I have a club starter kit on my local server which is working fine.I have migrated the database to my remote host and seems to have transfered ok.For a brief period I was able to connect to the database remotely, but now I cannot I get the following, even though SQL Server Surface Area Config is set to accept remote connections.An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)This is my connection string;<add name="ClubSiteDB" connectionString="Data Source=xx.xxx.xx.xx,xxxx; Network Library=DBMSSOCN; Initial Catalog=tets; User ID=sqladminbob;Password=sqlbob4398;" providerName="System.Data.SqlClient="/>I hav also tried to use aspnet_regsql.exe to add the remote provider but I get the same message. Thanks
View 3 Replies View RelatedHi.,please help.,i get this error.,i made my web and deploy it in a different system which is winserver03, we have in the same network.how will i enable SQL remote access:
Server Error in '/' Application.
An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance
Specified) Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: An error has occurred while establishing
a connection to the server. When connecting to SQL Server 2005, this failure
may be caused by the fact that under the default settings SQL Server does not
allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error
Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800131 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +737554 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +114 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +421 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +133 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +30 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +494 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83 System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770 System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17 System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70 System.Web.UI.WebControls.GridView.DataBind() +4 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82 System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69 System.Web.UI.Control.EnsureChildControls() +87 System.Web.UI.Control.PreRenderRecursiveInternal() +50 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2041
Version Information: Microsoft .NET Framework Version:2.0.50727.1433;
ASP.NET Version:2.0.50727.1433
On my SQL Server 2014 SP1 on Windows Server 2012 R2, allow inbound TCP 1433 and UDP 1434 seems to not be enough for managing remotely any named instance on this server.
View 8 Replies View RelatedHi, I have a SQL Server machine, which has SQL Server 2005 installed in it. I'm able to connect to this server remotely (Remote Desktop Connection)
But when I'm trying to connect this SQL Server using SSMS. I'm getting the following error.
TITLE: Connect to Server
------------------------------
Cannot connect to 10.192.24.253.
------------------------------
ADDITIONAL INFORMATION:
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft SQL Server, Error: -2)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-2&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
-Senthil
hi, all
When i tried to access a report via URL and I got an error page like:
Reporting Services Error
For more information about this error navigate to the report server on the local server machine, or enable remote errors
SQL Server Reporting Services
So, How to enable the remote errors and then I was able to see what is wrong.
Thanks.
How do I enable remote errors for Reporting Services 2005?
View 5 Replies View RelatedDoes someone have a guide or a link to a guide to allow remote connections from a default install?
Just that I'm currently testing my setup on a work laptop but not having much success but thats probably down to the network admins limiting me far too much on here.
However I am getting a new DELL machine, which I'm gonna make sure the network admins get no where near. Once I have this machine I will be forwarding port 1433 to the machine, but need to know what other changes I need to make to allow my friend access to the machine as well.
So I'd need to know what server settings I need to change and also what my friend needs to do as a client.
thanks in advance!
Hi all,
I would like to enable remote connection on SQL Express 2005 using SMO.
How can I do it?
Thanks,
Assaf
Hello community
I have the following problem = /
http://img101.imageshack.us/my.php?image=asdfzv7.jpg
While trying to transfer my website project to another computer I am encountering an error when tryng to run the solution. It gives me a "Does not allow remote connections". Why is this when on the original computer everything worked fine.
Walter
Hi folks,Perhaps every 100 calls to DB i get 1 error message like this:"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)" i am using SQL 2000 and am wondering why this happens.I appreciate your help.Leo.
View 3 Replies View RelatedI am getting the following connection error:An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)When I run the page locally on my develepment environment, the page runs fine. I'm using VS2005 and SQL Server Management Studio Express.When I upload the page to the remote server, I get the connection error indicated above.To further troubleshoot the issue, I created a simple test page with the connection string hardcoded in the code-behind and binded to a dropdownlist using the following code:SqlConnection conn = new SqlConnection("Data Source=xxx.xxx.xxx.xx;network=DBMSSOCN;Initial Catalog=TechCenter;Persist Security Info=True;User ID=xxxxx;Password=xxxxxrx;Asynchronous Processing=True;MultipleActiveResultSets=True");
conn.Open(); SqlDataReader dr; SqlCommand command = new SqlCommand("SELECT RecordID, customer_id FROM Customers WHERE recordtype <> 'F' ORDER BY customer_id ASC", conn); dr = command.ExecuteReader(); while (dr.Read()) { DropDownList1.Items.Add(new ListItem(dr["customer_id"].ToString(), dr["RecordID"].ToString())); } dr.Close(); conn.Close();When I run the test page, it works fine, so I know I'm using the correct connection string properties.When I move the connection string to the web.config file and using a dataset with a tableadapter, I get the error about the sql server not allowing remote connections? I'm stumped. I cannot isolate the cause of the error.The remote server is using sql server 2000 and error indicates it is trying to connect to SQL Server 2005??? Any help would be greatly appreciated.Thank you.
I have a need to connect to a remote (i.e. database on the clients site) SQL Server database from a live application. It is relatively easy under Oracle, but I havent tried to do to an SQL Server. Has anyone done this? The remote SQL Server database in question is 6.5
You can set up odbc connections to remote clients (99% sure on this) so you could go this way. You can also connect directly to a sql box through an IP address in sql7, but I am not too sure how it is with 6.5.
Hi All,
I installed full version of SqlServer 2005. Iam able to Connect to all the systems that are in Intranet. But iam not able to Connect to the external systems (or) remote Connections. I followed all the steps that are in the following URL support.microsoft.com/kb/914277
Still iam getting the problem. Show me a way in this issue.
Thanks&Regards,
SrinivasReddy
Hello ,
The problem is that we are having Problem while making the remote Connection to the Sql Server 2005
Basically We are having a problem connecting to SQL2005 through a package remotely. when we try to connect to a remote data base, we get the following error
[Connection manager "CRA LRRS Development DB"] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. ".
Although by running the configuration manager on the Remote DataBase System we have enable the Remote Connections through name and IP both but still it cant access it.
Please tell us the possible consequences and provide us the feedback.
I will be really obliged if any of you can provide us the feedback on it as soon as possible.
Thanking You,
Yours Sincerely,
Saima Salim
Hello,
In SQL Server 2005 configuration tools, is there a way to set SQL Server to remote connections and to set the TCP Port through c# code?
Thanks for your help.
I am running a standalone WinXP SP2 system with VS 8 and SS 5 Express on it. I have been working very nicely with VB and SSCE, but I want to learn to use Sql Server 5 Express, which I also have on my system from a prior install of VS 5. I am strictly doing this as a learning experience on my own.
I have been trying to install the NW sample database into SS 5 Ex, but it is obviously not configured properly, because I am getting errors stating that the scripts cannot install because they cannot establish a remote connection to SS. So I looked up the FAQ item here on setting up for remote connections (which I am not even sure applies for a standalone system like mine). Anyway, I followed the instructions in the FAQ, using the SAC util to configure for remote connections, but it does not work. Every time I try to start the DB engine, it fails with the following message:
When trying to start Database Engine when configuiriung for remote connections in SAC:
"TITLE: Surface Area Configuration
------------------------------
The service did not respond to the start or control request in a timely fashion, you need
administrator privileges to be able to start/stop this service. (SQLSAC)
Now, I am the admin user on the PC but OK, so I selected the SAC option to set myself as SSadmin, even though this option is supposedly only for Vista users according to the dialog. Anyway, it does not allow me to set myself as SSAdmin, it returns the following error:
When trying to add myself to SQLSAC, even though it is for Vista:
"TITLE: .Net SqlClient Data Provider
------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL
Server 2005, this failure may be caused by the fact that under the default settings SQL Server
does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open
a connection to SQL Server)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtI
D=2&LinkId=20476"
(which help link is no help BTW, because it is not valid). And the setting does not get set, because the next time I open that dialog, I am back to being a non-admin user.
So what is the solution here? Am I going to be able to use SS 5 Ex on my PC? No matter which connection option I select, either local only, or for any of the remote options, I cannot get it to work. Am I supposed to reboot my PC after changing a setting? Or is it just not possible to run SS 5 Ex on a standalone PC like mine?
Or worse, are there a bunch of other configuration settings I must change as well? I note that, when I look in the SS Config Manager at the properties for SS Express, I see that it shows the logon option that uses the built-in account "Network Service"rather than Local System or Local Service; is that correct? BTW the browser is always running in all this.
As you may gather, I know zip nada about SS, but I am an experienced VB/VBA/VC+/FP programmer of many years, did desktop Access databases w/VB6 frontends for a lot of customers, so I am familiar with DB design etc. I just know next to nothing about backend stuff like this, other than a little with BTrieve years ago.
Any help appreciated
Pete B
.
I am having trouble with Report Manager. It seems that every day or every other day we get this message:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No such host is known.) An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections."
To fix this we open the Surface Area Configuration for the server that hosts the Reporting Database and stop and restart the database engine then open up the Surface Area Configuration for the server that hosts the Report Manger database and stop and restart that database engine along with the Reporting Services Browser.
This actually may not be the exact order that we do the stop/starts because we have tried so many different combinations (ie. stop one then start another then restart that one, etc.). Anyway, we usually keep on stoping and restarting until we can get back into Report Manager without getting the error message from above.
Does anyone have any insight as to what this could be??
TITLE: Connect to Database Engine
------------------------------
Cannot connect to FRI-0503SQLEXPRESS.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) (Microsoft SQL Server, Error: 10061)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10061&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I have recieved this error and i have changed the surface area configuration to allow remote connections but it still won't allow them after i start and restart the server service. is there any way to fix this i have reinstalled several times and that has not yet fixed the problem either.
Hi all
This question has probably been asked a few times on the forum but none of the answers work for my situation.
I recently installed SQL Server 2005.
When trying to connect to my server, locally, using Management studio, I get the following error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53).
I have already enabled remote connections in the Surface Area Configuration, using TCP/IP and pipes.
I created exceptions in the Firewall and started the Server Browser service.
Please help
Thanks
I downloaded VS studio express, and created a personal website using the wizard to test drive the thing. When I hit ctr + f5 to run the sample provided, then I get this message:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) "
I tried disabling the firewall (Norton's firewall because Windows is disable always). Any suggestions? This is a brand-new machine, running XP sp2, just downloaded the VS studio express.
I really appreciate your inputs.
Regards,
Carlos
info@paesano.com
Hi,
I'm without a clue when it comes to SQL and how to secure it!
I've set up a SQLExpress running on a dedicated server on the web and I'm using TCP/IP remote connection to connect to the DB from a the web server running the ASP .
Would it be better using named pipes?
Also is there some way I can additionally authenticate a connection based on IP numbers?
I would really appreciate some advice thanks.
Hi,
Attempting to open a new database engine from a Windows 2003
R2 server (x64) which is
running SQL Server 2005 to my desktop PC (XP Pro) which is running SQL 2005 developer
edition.
I€™ve opened up TCP/IP and named pipes and enabled all protocols
within surface area configuration and server
configuration manager but get this€¦
An error has occurred while establishing a connection to the
server. When connecting to SQL Server
2005, this failure may be caused by the fact that under the default settings
SQL Server does not allow remote connections. (provider: TCP Provider, error: 0
- A connection attempt failed because the connected party did not properly
respond after a period of time, or established connection failed because
connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)
Is this a red-herring type message? I ask because the text
states €œthis failure may be caused€? and as far as I can see I€™ve open up my
PC to all connections.
Thanks in advance
Dave
hi,
sql server 2005 express is installed on comp1. my client application is installed on comp2 and comp3. all comps have win xp. when i run my application, it can't connect to sql server express. i got the following message:
an error has occured while establishing a connection to the server. when connecting to sql server 2005, the failure may be caused by the fact that under the default settings sql server does not allow remote connections. (provider: sql network interfaces, error 26 - error locating server/instance specified)
so, how can i solve this problem, to connect to the server?
TITLE: Connect to Database Engine
------------------------------
Cannot connect to FRI-0503SQLEXPRESS.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) (Microsoft SQL Server, Error: 10061)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10061&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
this is the error message i get and i don't know how to correct it. i have tried going into surface area configuration and setting it allow remote connections but that hasn't changed anything. i am at a loss for how to correct this situation.
when i try to add a new data connection from within Visual basic or C#, i get a 'provider: SQL Network Interfaces, error number 26 - error locating server/instance specified.
i have tried to allow remote connections through the sql configuration manager and the surface area configuration.
I've got the following error from running my aspx webpages, trying to communicate to the MSSQL 2005 database.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Shared Memory Provider, error: 40 - Could not open a connection to SQL Server)
I've see and read a lot of chatter on the forum on the topic, but didn't find my solution. I have done a number of things, all of which didn't shake the error.
1) I went into SQL Server Surface Area Configuration for Services and Connections, and set Remote Connections to Local and Remote Connections, using TCP/IP only
2) Disabled Firewall
3) Made exceptions throught the Firewall for SQL Server and SQL Browser
Any other suggestions, thanks in advance.