How To Enforce Precedence At Data Flow Level?
Aug 6, 2007
I wish to use the same data to update 2 different tables.
There is no green arrow output from the OLE DB data destination, so I can't have another component following on from the first insert.
This means I have to use the Multicast to 'copy' the data prior to the first table insert.
I can then use the data to perform inserts to both tables.
However, there is an FK constraint between these two tables, so I need to wait until the first table insert has finished before performing the second table insert.
How can I do this? How can I make the second insert dependent on the first?
View 9 Replies
ADVERTISEMENT
Dec 13, 2007
Hi,
I'm building a package wherein I perform a SQL task(A) if the error log is not empty. This same SQL task(A) is also being used by another data flow task(B). The precedence points from B to A bottom to top. When I execute, all the tasks in the downward direction (precedence pointing downward/sideways) execute but this one doesnt as it points updwards. I can copy and paste task A and make B point to A downward, but I dont want to duplicate A in the same package.
Is there any other approach?
If you dont understand the above, see the flow:
X (SQL task) ----on success-------------> A (SQL task)
| ^
| |
...(sequence of steps) |
| |
| |
B(Data Flow Task) ---------failure --------|
Execution flow doesnt move from B to A, even though its a failure condition. Hope this explains the problem.
Thanks and Regards,
Subha Fernando
View 6 Replies
View Related
Aug 16, 2007
Hi,
I use lookups to map surrogate of level 1 dimensions to my fact tables in SSIS.
But how to handle a level 2 dimension with a ValidFrom and a ValidUntil date field?
I do not use an IsCurrent column, because this could problem with late arriving facts.
- In dts I used an SQL statement like this:
update SA
SET SA.DimProdRef = Dim.RecordID
FROM SAWarenEingang SA, DimProd Dim
where SA.ProduktNumber = Dim.ProduktNumber
and SA.ArtikelkontoBewegungsdatum between Dim.ValidFrom and Dim.ValidUntil
Now in SSIS I want to handle the whole thing in the data flow without using a staging table:
- Using Lookups: I would have to pass the date column for each inside the fact table into the lookup. That does not work.
- Using Execute SQL in the data flow: would be very slow, because the statement will be executed for any line in the dataflow
Any ideas?
Best regards,
Stefoon
View 10 Replies
View Related
Aug 29, 2007
Hello,
Is it possible to use existing data flow components (Merge Join, aggregation,...) in a custom data flow component?
Thanks,
Yoann
View 15 Replies
View Related
Feb 14, 2006
Hi, All,
I need to pass a parameter from control flow to data flow. The data flow will use this parameter to get data from a Oracle source.
I have an Execute SQL task in control flow to assign value to the Parameter, next step is a data flow which will need take a parameter in the SQL statement to query the Oracle source,
The SQL Looks like this:
select * from ccst_acctsys_account
where to_char(LAST_MODIFIED_DATE, 'YYYYMMDD') >?
THe problem is the OLE DB source Edit doesn€™t have anything for mapping parameter.
Thanks in Advance
View 2 Replies
View Related
Mar 9, 2007
I have an Execute SQL Task that returns a Full Rowset from a SQL Server table and assigns it to a variable objRecs. I connect that to a foreach container with an ADO enumerator using objRecs variable and Rows in first table mode. I defined variables and mapped them to the columns.
I tested this by placing a Script task inside the foreach container and displaying the variables in a messagebox.
Now, for each row, I want to write a record to an MS Access table and then update a column back in the original SQL Server table where I retreived data in the Execute SQL task (i have the primary key). If I drop a Data Flow Task inside my foreach container, how do I pass the variables as input to an OLE DB Destination on the Data Flow?
Also, how would I update the original source table where source.id = objRects.id?
Thank you for your assistance. I have spent the day trying to figure this out (and thought it would be simple), but I am just not getting SSIS. Sorry if this has been covered.
Thanks,
Steve
View 17 Replies
View Related
Jan 17, 2008
Dear All!
My package has a Data Flow Task. In Data Flow Task, I use a Script Component and a OLE BD Destination to transform data from txt file to database.
Within Data Flow Task, I want to call File System Task to move file to a folder or any Task of "Control Flow" Tab. So, Does SSIS support this task? Please show me if any
Thanks
View 3 Replies
View Related
May 17, 2007
Hi everyone,
Primary platform is 64 bit cluster.
How to move information allocated in SSIS variables from Data Flow to Control Flow layers??
We've got a SSIS package which load a value into a variable inside a Data Flow. Going back to Control Flow how could we retrive that value again????
Thanks in advance and regards,
View 4 Replies
View Related
Jan 12, 2006
I'm currently setting variables at the package level with an ExecuteSQL task. This works fine. However, I'm now starting to think about restartability midway through a package. It would be nice to have the variable(s) needed in a data flow set within the data flow so that I only have to restart that task.
Is there a way to do that using an SQL statement as the source of the value in a data flow?
OR, when using checkpoints will it save variable settings so that they are available when the package is restarted? This would make my issue a moot point.
View 2 Replies
View Related
Jul 22, 2007
Hi all! I recently started working with SSIS and one of the things that is puzzling me the most is what's the best way to go:
A small control flow, with large data flow tasks
A control flow with more, but smaller, data flow tasksAny help will be greatly appreciated.
Thanks,
Ricardo
View 7 Replies
View Related
Dec 28, 2007
Hi,
I'm trying to implement an incremental data pull (Oracle to SQL) based on Andy's blog:
http://sqlblog.com/blogs/andy_leonard/archive/2007/07/09/ssis-design-pattern-incremental-loads.aspx
My development machine is decent: 1.86 GHz, Intel core 2 CPU, 3 GB of RAM.
However it seems the data flow task gets hung whenever I test the package against the ~6 million row source, as can be seen from these screenshots. I have no memory limitations on the lookup transformation. After the rows have been cached nothing happens. Memory for the dtsdebug process hovers around 1.8 GB and it uses 1-6 percent of CPU resources continuously. I am not using fast load to insert new records into my sql target table. (I am right clicking Sequence Container 3 and executing this container NOT the entire package in the screenshots)
http://i248.photobucket.com/albums/gg168/boston_sql92/1.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/2.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/3.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/4.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/5.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/6.jpg
The same package works fine against a similar test table with 150k rows.
http://i248.photobucket.com/albums/gg168/boston_sql92/7.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/8.jpg
The weird thing is it only takes 24 minutes for a full refresh of the entire source table from Oracle to the SQL target table.
Any hints,advice would be appreciated.
View 18 Replies
View Related
Aug 5, 2015
I want to return a BIT from an outer join. I want the result type to be BIT. However, the usage of ISNULL is forbidden by code standards. The first expression returns an INT. Which of the bottom expressions do you think would work best in a query?
And why would ISNULL be absolutely forbidden? I was told that Microsoft deprecated it along with TINYINT, which I'm often prevented from using even when it's the appropriate data type.
DECLARE @x BIT;
DECLARE @default BIT = 1;
DECLARE @something sql_variant;
SELECT @something = COALESCE(@x, 1);
SELECT SQL_VARIANT_PROPERTY(@something, 'BaseType');
SELECT @something = COALESCE(@x, @default);
SELECT SQL_VARIANT_PROPERTY(@something, 'BaseType');
SELECT @something = COALESCE(@x, CAST(1 AS BIT));
SELECT SQL_VARIANT_PROPERTY(@something, 'BaseType');
View 4 Replies
View Related
Nov 24, 2006
Hi, all here,
Thank you very much for your kind attention.
I am wondering if it is possible to use SSIS to sample data set to training set and test set directly to my data mining models without saving them somewhere as occupying too much space? Really need guidance for that.
Thank you very much in advance for any help.
With best regards,
Yours sincerely,
View 5 Replies
View Related
Mar 20, 2007
Good morning, all,
I am working on importing an Excel workbook, saved as multiple CSV flat files, that has both group level data and related detail row on the same sheet. I have been able to import the group data into a table. As part of the Data Flow task, I want to be able to save the key value for the group, which I will use when I insert the detail rows.
My Data Flow has the following components: The flat file with the data, which goes to a derived column transformation to strip out extraneous dashes, which leads to the OLEDB Destination component.
I want to save the value as a package level variable, so that I can reference it in another dataflow.
Is this possible, and if so, at what point do I save the value?
Thanks,
Kathryn
View 1 Replies
View Related
Apr 13, 2004
Hi,
We testing our security.
For NT logins user password complexity and expiration enforced by NT
1.Any way to enforce password complexity and expiration for standard sql login ?
2.any way to check if existing sql login passwords less then N number of characters?
Thank you
Alex
View 3 Replies
View Related
Oct 22, 2007
I have recently restored an SQL Server 2000 database on SQL Server 2005
A number of constraints on the database had previously been disabled
A monthly process that is carried out, imports data into 'Table A'.
This process now crashed, being unable to truncate table as it referenced by 'Table B'
Although when i check the properties of the constraint the 'enforce foreign key constraints' is set to no.
Is there a known issue with restoring databases on 2005,
Any help greatly appreciated.
Micheal
View 2 Replies
View Related
Oct 12, 2014
how to i write a trigger to enforce this constraint..A rental can be made only if the customer is registered with the company and the car is not currently rented out. If not, the rental will not be successful.
View 1 Replies
View Related
Mar 20, 2007
I have a 3 node cluster running windows 2003 x64 sp1 and SQL Server 2005 version 9.00.2153. My problem is the following...
This Saturday I migrated a web application's database to this server. After restoring the database I created the sql login for the service account, set the password and disabled the password policy for this login. I then ran sp_change_users_login to attach the already existing db user with the same name to the login. I changed the connection string for the application, tested the application connectivity and functionality then detatched the old database on the old server. Everything went like clockwork, no problems at all.
Come Monday morning at 8:35 I started getting alerts that the web site was down. I tested the site and sure enough it was down. I then attempted to connect to the database server using the login that was created for the app and the connection failed. I logged in with my ID and got in fine. Nothing showing to be wrong with the DB, I checked the new login and somehow the "Enable Password Policy" had been set for the new login. I disabled it and still no connection. I went to the database and checked the DB user and somehow the link between it and the login no longer existed. I reran the sp_change_users_login and restested the web site and verified that that web site was back online.
My question is this, is there any stored proc that resets these values back to default for some reason, a series of events that might revert the "Enable Password Policiy" to the default for a login, or is there a particular domain level operation that might occur such as Security Polcies that would affect these settings in SQL?
No one else was on the machine when I went to check it out at 8:40 so it has left me puzzled.
Any help would be appreciated.
Thanks.
Zach
View 3 Replies
View Related
Dec 28, 2007
I've got a table that includes:CREATE TABLE [dbo].[Content] ( [Id] int IDENTITY(1, 1) NOT NULL, [ParentId] int NULL,
I'm wanting to make sure that a ParentId must be in the table as Id someplace else. When I try to do it by making it a foreign key get the error:
--------------- SQL ---------------
ALTER TABLE [dbo].[Content]ADD CONSTRAINT [Content_fk3] FOREIGN KEY ([Id]) REFERENCES [dbo].[Content] ([ParentId]) ON UPDATE NO ACTION ON DELETE NO ACTIONGO
---------- ERROR MESSAGE ----------
There are no primary or candidate keys in the referenced table 'dbo.Content' that match the referencing column list in the foreign key 'Content_fk3'.Could not create constraint. See previous errors.
Any ideas?
ALTER TABLE [dbo].[Content]ADD CONSTRAINT [Content_fk3] FOREIGN KEY ([Id]) REFERENCES [Content].[dbo] ([ParentId]) ON UPDATE NO ACTION ON DELETE NO ACTIONGO
View 3 Replies
View Related
Sep 28, 2005
Hi I have a problem. I have a replicated database. Now I have a couple of tables within the database where I delete the content row by row and caluted the new record and insert them. Now when I do this on the development system that is unreplicate it is fine. However on production that is replicated I get this error:
System.Web.HttpUnhandledException: Exception of type System.Web.HttpUnhandledException was thrown. ---> System.Data.SqlClient.SqlException: INSERT statement conflicted with COLUMN FOREIGN KEY constraint 'FK_VARLISTS_USERVARLISTS'. The conflict occurred in database 'BHP', table 'USERVARLISTS', column 'AutoID'.
INSERT statement conflicted with COLUMN FOREIGN KEY constraint 'FK_VARLISTS_USERVARLISTS'. The conflict occurred in database 'BHP', table 'USERVARLISTS', column 'AutoID'.
INSERT statement conflicted with COLUMN FOREIGN KEY constraint 'FK_VARLISTS_USERVARLISTS'. The conflict occurred in database 'BHP', table 'USERVARLISTS', column 'AutoID'.
Now I persume this is caused by the foreign key being contrained by the replicated database. I had though about unticking the box 'Enforce Relationship for replication' but I am not sure what problems this may cause.
Woudl this fix my problem? If not do you have any idea what would.
Thanks Ed
View 1 Replies
View Related
Jul 23, 2005
Hi,I have two tables Table A and B, below with some dummy data...Table A (contains specific unique settings that can be requested)Id, SettingName1, weight2, lengthTable B (contains the setting values, here 3 values relate to weightand 1 to length)Id, Brand, SettingValue1, A, 1001, B, 2001, null, 3002, null, 5.3(There is also a list of Brands available in another table). No primarykeys / referential integrity has been setup yet.Basically depending upon the Brand requested a different setting valuewill be present. If a particular brand is not present (signified by anull in the Brand column in table B), then a default value will beused.Therefore if I request the weight and pass through a Brand of A, I willget 100If I request the weight but do not pass through a brand (i.e. null) Iwill get 300.My question is, what kind of integrity can I apply to avoid the userspecifying duplicate Ids and Brands in table B. I cannot apply acomposite key on these two fields as a null is present. Table B willprobably contain about 50 rows and probably 10 of them will be brandspecific. The reason its done like this is in the calling client code Iwant to call some function e.g.getsetting(weight) .... result = 300Or if it is brand specificgetsetting(weight,A) ..... result = 100Any advice on integrity or table restructuring would be greatlyappreciated. Its sql 2000 sp3.Thanksbrad
View 9 Replies
View Related
May 22, 2008
Hello,
I am building a winforms .net 3.5 application which connects to a SQL Server 2005 database with SQL server authentication. Is it possible to access the SQL Server password policy and expiration through the .NET 3.5 framework? I would like add the following functionality to my login form:
Ensure passwords meet policy standard.
Prompt a user to change their password when it is due to expire in 5 days or less.
Thanks in advance.
View 1 Replies
View Related
Jun 13, 2006
Hi everyone,
I have to extract, dayly a list of contacts on a exchange server in a table on our EDW on sql server 2005. Is it possible to get the information directly from a dataflow or i will have to developpe a script task ?
Need help desperatly !!!
View 3 Replies
View Related
Jun 19, 2007
Hello,
I have noticed that for one of my data-flows, the process is really long during the phase "the final commit data insertion has started".
To be accurate, the process is fast until it reaches this phase. It happens often when I load millions of lines.
The extraction is done from a database SQL Server 2005 to a database SQL Server 2005, on the same server (with the SQL Server native provider).
I used a SQL Server destination but I have tried with an OLE DB destination and it is the same situation.
Why the process could be so long during this phase?
There is a way to optimised my package to avoid that?
Any idea is welcome.
Thanks.
Guillaume
View 6 Replies
View Related
Mar 28, 2008
Hi All,
I want to export data from SQL Server2005 to an Excel spreadsheet thru "Data Flow Task". I am using OLE DB for SQL Server for the source connection and a Connection To Excel as my destination source. The Excel spreadsheet (2003) exists and has the first row with column names. I don't have any warnings before trying to execute.
The SQL datable fileds are
i) ID - Int
ii) RefID
iii) txtRemarks - nvarchar(MAX)
iv) ddlWaterLevel - nvarchar(50)
While executing the tasks, I got the error
Error: 0xC0202025 at Data Flow Task, Excel Destination [427]: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
Error: 0xC004701A at Data Flow Task, DTS.Pipeline: component "Excel Destination" (427) failed the pre-execute phase and returned error code 0xC0202025.
After analysing I found in the DataFlow --> Excel destination --> Advanced Editor for Excel Destination, the default data type for txtRemarks shows as "Unicode string [DT_WSTR]". But this is supposed to be "Unicode text stream [DT_NTEXT]". Even if I change the data type in the design time, It doesn't accept.
Please do help me out.
thanks
Sanra
View 4 Replies
View Related
Apr 3, 2014
I need to see inside a SSIS 2012 project a new SSIS installed component, but in the SSDT 2010 I cannot see the SSIS Data Flow Items tab for adding data source/data destination respect to the choose toolbox items pane.
View 4 Replies
View Related
Feb 28, 2008
Hi, all experts here,
Do we always have to use SCD component for the loading of data into data warehouse to handle changes of rows?
I am looking forward to hearing from you and thank you very much in advance for your help.
With best regards,
View 4 Replies
View Related
Jan 29, 2008
I need to call a stored procedure to insert data into a table in SQL Server from SSIS data flow task.
I am currently trying to use OLe Db Destination, but I am not sure how to map inputs to OLE DB Destination to my stored procedure insert.
Thanks
View 6 Replies
View Related
May 12, 2006
I am getting the following error running a data flow that splits the input data into multiple streams and writes the results of each stream to the same destination table:
"This operation conflicts with another pending operation on this transaction. The operation failed."
The flow starts with a single source table with one row per student and multiple scores for that student. It does a few lookups and then splits the stream (using Multicast) in several layers, ultimately generating 25 destinations (one for each score to be recorded), all going to the same table (like a fact table). This all is running under a transaction at the package level, which is distributed to a separate machine.
Apparently, I cannot have all of these streams inserting data into the same table at one time. I don't understand why not. In an OLTP system, many transactions are inserting records into the same table at once. Why can't I do that within the same transaction?
I suppose I can use a UnionAll to join them back together before writing to a single destination, but that seems like an unnecessary waste and clutters the flow. Can anyone offer a different solution or a reason why this fails in the first place?
Thanks in advance.
View 3 Replies
View Related
Jan 5, 2006
I need to know what a table's max row Identity is part way thru a data flow. I can't get it at the beginning of the data flow. I need to either (1) add it to the data buffer part way thru or (2) set it into a package variable and then reference the var in a script component.
I've not found a way to add a database column to the data buffer without doing a lookup for each row (too slow and not appropriate here) or some goofy oledb source and then merge join into the data buffer on a contrived join.
I've read questions about referencing package vars in scripts but I can't get that to work. DTS.Variables("varname").Value isn't recognised when I code it up.
Anyone have an idea or solution for either one of these? If you're gonna explain the script code, please include the entire snipet including the INCLUDEs, etc.
View 8 Replies
View Related
Aug 1, 2001
Can someone give me an example on how to enforce cross-database referential integrity with triggers in SQL Server 2000?
Thanks,
Joel
View 1 Replies
View Related
Feb 27, 2015
I have two procedures Sp1 and Sp2. The Sp1 is calling from Sp2. If there come new parameters or removed from the first procedure Sp1 then it will effect the Sp2 and its execution will break if required changes not done. So I want that when any changes making in SP1 then i need alert about the Sp2 changes.
View 3 Replies
View Related
Jul 12, 2007
I am trying to create a login using my application.
The application creates the user and password itself .
when working with sql server 2000 it works fine.
when i try to install my application with sql server 2005 it is displaying the error .
'Password does not meet windows policy requirements
because it is not complex enough'
I want to keep the same password.
Is there any way to disable/uncheck this option by default?
Prashant
View 5 Replies
View Related
