How To Fetch Data Before Inserting A New ROW If We Are Using Identity Column??????
Apr 21, 2008
Hi,
I am using SQL Server 2005 Mobile Edition & Merge Replication
in this I want to insert a record into table,
in that table I have taken UserID coloumn as auto incrementing Identity type.
In a book I read that,
If you are using an Identity column, you must find the next available number and reseed before an insert can be successful. You will also have to set up ranged identity columns on the published database to prevent errors when the new data is merged.
Now I want to ask here that, how should I ressed that value before inserting?????
any help in a form of CODe will be appriciated.....
thanks in advance...
View 8 Replies
ADVERTISEMENT
Jul 25, 2015
I have a four tables called plandescription, plandetail and analysisdetail. The table plandescription has the columns DetailQuestionID which is the primary and identity column and a QuestionDescription column.
The table plandetail consists of the column PlanDetailID which the primary and identity column, DetailQuestionID which is the foreign key attribute of plandescription table and a planID column.
The third table analysisdetail consists of a analysisID which the primary and identity column, PlanDetailID which is the foreign key attribute of plandetail table and a scenario.
Below is the schema of the three tables
I have a two web form that will insert, update and delete data into these three tables in a two transaction. One web form will perform CRUD operations in plandescription and plandetail table. When the user inserts QuestionDescription and planid in this web form, I will insert the QuestionDescription Value in the plandescription table and will generate a DetailQuestionID value and this value is fed to the plandetail table with the planid. Here I will generate a PlanDetailID.
Once this transaction is done, I will show the second web form in which the user enters the scenario and this will be mapped with the plandescription using the PlanDetailID.
This schema cannot be changes as this is the client requirement. When I insert values I don’t have any problem. However when I update existing data, I need to delete existing PlanDetailID in the plandetail table and recreate PlanDetailID data for that DetailQuestionID and planID. This is because, the user will be adding or deleting a planID associated with the QuestionDescription.
Once I recreate PlanDetailID for that DetailQuestionID and planID, I need to update the old PlanDetailID with the new PlanDetailID in the third table analysisdetail for the associated analysisID.
I created a #Temp table called #DetailTable to insert the values analysisID, planid and old PlanDetailID and new PlanDetailID so that I can have them in update statement once I delete the data from plandetail table for that PlanDetailID.
Then I deleted the plandetailid from the plandetail table and recreate PlanDetailID for that DetailQuestionID. During my recreation I fetched the new PlanDetailID’s created into another temp table called #InsertedRows
After this I am running a while loop to update the temp table #DetailTable with the newly created PlanDetailID for the appropriate planID’s. The problem is here. When I have the same number of planID’s for example 2 planID’s 1,2 I will have only two old PlanDetailID and new PlanDetailID for that planID and analysisID.But When I add a new PlanID or remove a existing planID I am getting null value for that newly added or deleted planID. This is affecting my update statement of analysisdetail table as PlanDetailID cannot be null.
I tried to remove the Null value from the #DetailTable by running the update statement of analysis detail in a while loop however its not working.
DECLARE @categoryid INT = 8
DECLARE @DetailQuestionID INT = 1380
/*------- I need the query to run for the below three data.
Here i'm updating my planids that already exists in my database*/
DECLARE @planids VARCHAR(MAX) = '2,4,5'
[code].....
View 2 Replies
View Related
Jun 19, 2008
Hi,
I am having problem in bulk update of a sql server table haning identity column from a datatable( has no identity column) using sqlbulkcopy. I tried several approaches, but it does not show any error nor is the table getting updated. But the identity value seems to getting increased every time.
thanks.
varun
View 6 Replies
View Related
Jan 2, 2001
Hi Friends
Happy new year 20001.
Is it requires DBO Permission for do 'SET IDENTITY_INSERT FARRentalUnit ON'
or Write permission is enough.
I don't want give dbo perivilage to user.
Please reply soon.
Thanks for reply in advance.
Murali
View 3 Replies
View Related
Jul 26, 2007
I have a database that has a tble with a field that autoincrements as a primary key. meanig that the field type is BigInteger and it is set up as my Identity Column. Now when I insert a new record that field gets updated automaticly.
How can I get this value in the same operation as my insert? meaning, in 1 sub, I insert a new record but then need to retieve the Identity Value. All in the same procedure.
Waht is the way to achive this please?
Marc
View 2 Replies
View Related
May 2, 2007
Hi All
Is it possible to insert the identity cloumn in a table via SSIS. I've an ID (Identity) column is a table and I am importing data in the table using Excel sheet. I want to insert the value of ID column as Identity(1,1).
View 10 Replies
View Related
Jan 16, 2006
Hi, All:Please help. I use sql server as back end and Access 2003 as front end(everything is DAO).A table on SQL server has an identity column as the key.We have trouble on adding records to this table using the following SQL.strSQL = "INSERT INTO myTableOnSQLServer (A, B, C, D, E) SELECT A, B, C, D,E FROM myTableonAccessLocal"db.execute strSQLThe schema of the table "myTableOnSQLServer" and the schema of the table"myTableonAccessLocal" are all the same except that the "myTableOnSQLServer"has an identity column (ID). The key of the "myTableOnSQLServer" is "ID" andthe table "myTableonAccessLocal" does not have a key.When we try to run the query, it gives errors indicating the key is violatedor missing.Should I figure out the autonumber for it first and then add to the SQLserver table?Many thanks,HS
View 1 Replies
View Related
Apr 24, 2015
I am writing an Instead of Insert trigger. I would like to fire an error when inserting into an 'Identity' column. Since UPDATE([ColumnName]) always returns TRUE for insert statements, is there an easy/fast way around this? I don't want to use:Â
IF(EXISTS(SELECT [i].[AS_ID] FROM [inserted] [i] WHERE [i].[AS_ID] IS NULL))
here is my pseudo-code...
CREATE VIEW [org].[Assets]
WITH SCHEMABINDING
[Code] .....
-- How does this statement need to be written to throw the error?
--UPDATE([AS_ID]) always returns TRUE
IF(UPDATE([AS_ID]))
RAISERROR('INSERT into the anchor identity column ''AS_ID'' is not allowed.', 16, 1) WITH NOWAIT;
-- Is there a faster/better method than this?
IF(EXISTS(SELECT [i].[AS_ID] FROM [inserted] [i] WHERE [i].[AS_ID] IS NOT NULL))
RAISERROR('INSERT into the anchor identity column ''AS_ID'' is not allowed.', 16, 1) WITH NOWAIT;
-- Do Stuff
END;
-- Should error for inserting into [AS_ID] field (which is an identity field)
INSERT INTO [org].[Assets]([AS_ID], [Tag], [Name])
VALUES(1, 'f451', 'Paper burns'),
(2, 'k505.928', 'Paper burns in Chemistry');
-- No error should occur
INSERT INTO [org].[Assets]([Tag], [Name])
VALUES('f451', 'Paper burns'),
('k505.928', 'Paper burns in Chemistry');
View 7 Replies
View Related
Aug 29, 2007
I do an insert of the xml into the table and that works fine, but how do I split the tags to different tables. I have tried SSIS and a XML Source to an OLEDB Source, but since the xml file contains different groups that do not work.
The xml is created by Infopath and it seems like the groups are created if the components belongs to different sections.
Table1
id int,
xmltag xml
I am starting to be desperate, I really need some help solving this one way or another.
View 2 Replies
View Related
May 5, 2008
I am trying to build a Windows application using: Windows XP Pro ; VS Pro 2005, C# and SQL2005.
I have a database table as follows:
eg
1) myGameRecency which contains columns : GameId (identity specification column/primary key/not null), Date (not null), [1], [2], [3], [4]
Using the myGameRecencyAllBalls table ---
I wish to insert a date into a new row but have not been able to determine how to with the identity specification on the GameId column.
Can anyone please assist?
Thank you.
lpbcorp
sqlCmd.CommandText = "DECLARE @date datetime SET @date = '" + Date +
"DECLARE @lastRowGameId int " +
"DECLARE lastrow_gameidcursor CURSOR SCROLL FOR " +
"(SELECT GameId FROM " + DBGameName.ToString() + "RecencyAllBalls) " +
"OPEN lastrow_cursor " +
"FETCH LAST FROM lastrow_gameidcursor INTO @lastRowGameId " +
"' INSERT INTO " + DBGameName.ToString() + "RecencyAllBalls.Date VALUES (@date) WHERE GameId = @lastrow_gameidcursor + 1";
sqlCmd.ExecuteScalar();
View 6 Replies
View Related
Oct 17, 2007
I have a column name "DESC" in SQL Server table and I am getting an error when trying to insert data into this column. I cannot rename this column as it's not in my hand.
Please anybody reply me with good solution I am new to SQL.
Thanks
View 4 Replies
View Related
Aug 18, 2007
I need to put .doc data into a varbinary column for full text searching. I have created the db and columns but am unsure as to how to insert the varbinary data. I have found some discussions about inserting images but nothing explicitly on .doc files. Can anyone suggest resources or sample code?
View 3 Replies
View Related
Sep 26, 2013
I'm inserting data from a c# webservice into a table via a stored procedure, but I get a Column does not allow nulls on the @alert_id column/field. It is set as int and allow nulls is not ticked.
Here's the sql:
USE [aren]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [aren1002].[ArenAlertInsert]
[Code] ....
View 7 Replies
View Related
Sep 29, 2007
Hi,
I have a data file in the folloing format
SubjectId1|class1
SubjectId2|class2
SubjectId3|class3
I just wanted to insert only SubjectIds into my table 'Subjects' which has the follwing schama ignoring the classes
The row delimeter is "
" and the column delimeter is ' | '
Table Subjects
{
ID (Autoincrement)
SubjectId varchar(20)
}
Can any one provide the format file for doing this or suggest anyway to do this?
Please do note that the file may contain millions of records
Thank u
~mohan
View 5 Replies
View Related
Nov 13, 2000
Whenever I import (or even append from another table) data to a table that has an Identity column, I get an error: Cannot insert NULL values in Identity column.
Isn't the Idenity column supposed to incement automatically without me having to provide a value? Using INSERT provides an Identity value automatically, using import however doesn't.
How can I overcome this problem? (I now delete and recreate the Identity column - really BAD practice!)
Thank you.
View 4 Replies
View Related
Feb 6, 2008
Hi,
I need to insert data into a table using data flow task. Unfortunately this table's priamry key column (integer column) is not identity column. I am looking a way to get the primary key value for the new records. Please advice. Thanks
View 5 Replies
View Related
Dec 12, 2007
I'll preface this by saying I'm pretty new to SSIS; I'm coming over from Coldfusion and don't have much DTS experience to draw from either. That said....
I've got a package that I run to migrate data from a bunch of older databases into a "flat" new schema. The new schema is not identical to the old, in other words, so it's not a simple mapping of existing columns. All the data flow tasks have finally gotten to a working state, with much trial-and-error. Now, suddenly one of the tasks is throwing this error:
"...Cannot insert the value NULL into column 'the_id', table 'the_table'; column does not allow nulls. INSERT fails."
The column is an identity column in the new table; it is NOT NULL as it is the primary key. I've triple-checked that identity is on. Basically it's generated anew each time this package is run. In the data flow task, mappings are set to ignore for this column; also, Keep identity and Keep nulls are on (although since this column is not in the source I can't see how this affects anything.)
(***For anyone wondering why in the heck I'd need this column at all, offhand I can't recall if later tasks use it or not...I'm actually wondering if it's even needed in this read-only table if it's not used as a foreign key somewhere else...however, I'd like to figure out this issue regardless... )
I've had a hard time finding anyone with the same problem out there...usually people with NULL issues simply are trying to insert into a NOT NULL column. The big difference here is that the column is identity.
Thanks,
Rick
View 3 Replies
View Related
Oct 7, 2015
I have table contains more columns  and first column have ID  int not null primary key  and auto increment by 1 seed by 1 the ID 165000 record  and instant Jump to 166000 and increment by 1 ...
View 5 Replies
View Related
Aug 12, 2009
when i alter non identity column to identity column using this Query alter table testid alter column test int identity(1,1) then i got this error message Msg 156, Level 15, State 1, Line 3 Incorrect syntax near the keyword 'identity'.
View 2 Replies
View Related
Feb 17, 2006
Hi,
I have a indexing problem. I have a sequence that needs to has a index number. I want to use a table data type and have a working sample BUT I cannot reseed the table when needed. How do I do this.
This works only for the first ExitCoilID then I need to RESEED.
Here is my code:
DECLARE
@EntryCoilCnt AS INT,
@ExitCoilID AS INT,
@SubtractedFromEntyCoilCnt AS INT
DECLARE
@ExitCoilID_NotProcessed TABLE
(ExitCoilID int)
INSERT INTO @ExitCoilID_NotProcessed
SELECT DISTINCT ExitCoilID
FROM
dbo.TrendEXIT
where
ExitCoilID is not null and
ExitCnt is null
order by
ExitCoilID
DECLARE
@ExitCoilID_Cnt_Index TABLE
(ExitCoilID int, ExitCnt int IDENTITY (1,1))
IF @@ROWCOUNT > 0
BEGIN
DECLARE ExitCoilID_cursor CURSOR FOR
SELECT ExitCoilID FROM @ExitCoilID_NotProcessed
ORDER BY ExitCoilID
OPEN ExitCoilID_cursor
FETCH NEXT FROM ExitCoilID_cursor
INTO @ExitCoilID
WHILE @@FETCH_STATUS = 0
BEGIN
INSERT INTO @ExitCoilID_Cnt_Index
SELECT ExitCoilID
FROM dbo.TrendEXIT
WHERE
ExitCoilID = @ExitCoilID
ORDER BY
EntryCoilID, Cnt
select * from @ExitCoilID_Cnt_Index
--truncate @ExitCoilID_Cnt_Index
--DBCC CHECKIDENT ('@ExitCoilID_Cnt_Index', RESEED, 1)
FETCH NEXT FROM ExitCoilID_cursor
INTO @ExitCoilID
END
CLOSE ExitCoilID_cursor
DEALLOCATE ExitCoilID_cursor
select * from @ExitCoilID_Cnt_Index
END --IF @@ROWCOUNT <> 0
View 8 Replies
View Related
Sep 27, 2007
Someone asked me the other day about creating a table with one column that is an identity field and doing an insert so they can capture the SCOPE_IDENTITY() to use across seferal tables. I've never done anything like it and it seemed trivial at the time, but I'm not seeing how to make an insert work. So, for example, we have a table defines as: DECLARE @Bar TABLE (ID INT IDENTITY(1, 1) NOT NULL)
Now, how do you write a simple insert statement that will add a row to the table?
Basicaly, this is an acedemic exercise, but I can't seem to make it work unless I add another column to the table. Any ideas? Maybe I'm not caffinated enough..? :)
View 14 Replies
View Related
Feb 12, 2008
Hi All,
I have two tables.
Table A contains a unique column of some Keys.
Table B contains Key column,Value column and Entry_Time column.
Now I need the most recently entered value for each of the Keys in table A using table B.
I dont need any repeatation of Keys in my result.
Please help me out.I am using DB2.
View 1 Replies
View Related
Apr 26, 2002
I have an odd issue with a stored procedure using output parameters and a database text field.
I am using custom VB6 COM+ objects in the middle tier and SQL Server 2000 on the back end. The stored procedure has an int as it's first parameter; it is an output parameter which gets set to @@IDENTITY after the data is written to the tables. The last parameter is a text.
The COM+ object executes the proc; ADO 2.7 incorrectly identifies the text parameter as an adVarChar, so I explicitely convert it to an adLongVarChar when I detect that the incoming data is > 8000 characters.
The proc writes the data correctly to the database in all cases. However, when the data is > 8000 characters, SQL doesn't appear to correctly set the output variable. No errors are generated, I simply don't get any value written to the variable. I've searched through MS's documentation, but can't seem to find anything on this issue.
Any help or thoughts are appreciated.
View 1 Replies
View Related
Oct 12, 2006
Hi
I need to insert values from a text-file to a table with a primary key as identity. In the text file I have no idea of the primary key values and i get "foreign key constraint violation" when trying to import null values into the column.
How can I solve the problem? With ordinary insert-statement there is no problem since the table generates identity- key values automatically. Is there a possibility to generate identity values with DTS-import?
Björn
View 1 Replies
View Related
Nov 15, 2006
I have a table with the following schema:
CREATE TABLE [itis].[wrk_taxon_authors] (
[wb_taxon_author_id] [int] NOT NULL ,
[taxon_author_id] [int] IDENTITY (1, 1) NOT NULL ,
[taxon_author] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
[kingdom_id] [smallint] NOT NULL
) ON [PRIMARY]
GO
I am trying to insert the following data (as you can see fields are seperated with the | ):
19||Flores-Villela and Sánchez-H., 2003|5|
20||Wiegmann, 1828|5|
16|17482|Gray, 1838|5|
17|9823|(Wiegmann, 1828)|5|
I get the following error:Server: Msg 4869, Level 16, State 1, Line 1
Bulk Insert failed. Unexpected NULL value in data file row 1, column 2. Destination column (taxon_author_id) is defined NOT NULL.
Server: Msg 4869, Level 16, State 1, Line 1
Bulk Insert failed. Unexpected NULL value in data file row 2, column 2. Destination column (taxon_author_id) is defined NOT NULL.
Since I have defined column 2 as an identity column, I don't understand why SQL Query analyzer is upset when I do not have a value in that field. To me, I would think it would auto-insert an integer (starting at seed 1 and incrementing by 1), but it doesn't. Could someone tell me what I'm doing wrong?
View 7 Replies
View Related
Aug 2, 2007
Hi!
I have created a view and one of the columns in the view has an alias assigned to it.
I'm able to read the metadata from INFORMATION_SCHEMA.VIEW_COLUMN_USAGE and also lookup
from which table each column in the view orginated from except for the column that has an alias assigned to it.
Is there any other way to lookup a column that has an alias assigned to it?
Thanks alot!
Adam
View 2 Replies
View Related
Sep 11, 2014
I want to fetch max of Field2 if duplicate records in Field1 and rest of the values of field1 , below is the sample format.
Field1 Field2 Field3 Field4
32 375 abc-xyz A
32 379 xyz-efg A
55 405 abc-xyz B
55 407 xyz-efg B
132 908 abc-xyz C
132 999 xyz-efg C
152 800 abc-xyz D
152 850 xyz-efg D
155 900 abc-xyz E
156 925 abc-xyz F
157 935 abc-xyz G
View 2 Replies
View Related
Jun 12, 2015
MDX query to get the source table and column for a measure from ssas database. i want below highlighted using mdx.
View 4 Replies
View Related
Jan 25, 2015
I have table of three column first column is an ID column. However at creation of the table i have not set this column to auto increment. Then i have copied 50 rows in another table to this table then set the ID column values to zero.
Now I have changed the ID column to auto increment seed=1 increment=1 but the problem is i couldn't figure out how to update this ID column with zero value set to each row with this auto increment values so the ID column would have values from 1-50. Is there a away to do this?
View 6 Replies
View Related
Sep 19, 2005
Ok,I just need to know how to get the last record inserted by the highestIDENTITY number. Even if the computer was rebooted and it was twoweeks ago. (Does not have to do with the session).Any help is appreciated.Thanks,Trint
View 2 Replies
View Related
Jul 14, 2014
We are in the conversion process of making the database ints.This is a change from a guid PK to an integer based PK that uses an int Identity. The program still uses the guid, and we are trying to map that guid to the databases int.We insert using TVPs passed from code. Since the identity is being set upon insert I have three things to accomplish:
1) Insert all the data into the dbo table
2) Update the parent Id in the table
3) Pass the SetsId guid, Sets_Id int, ParentSets_Id int back to the program
This is a high transaction table that will have a lot of records (millions).
--Sample table creation. There is a FK between Sets_Id to ParentSets_Id, Clustered PK on the Sets_Id
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[JSets]') AND type in (N'U'))
BEGIN
CREATE TABLE [dbo].[JSets](
[SetsID] [uniqueidentifier] NOT NULL,
[Sets_Id] bigint Identity (1,1) NOT NULL,
[code]...
View 0 Replies
View Related
Apr 2, 2008
I am having troubles trying to copy some rows from a table on my local computer to a table on a remote SQL Server 2005 that is being hosted by one of thos web hosting companies. The problem is that the table has an identity column. I first tried using the the following command:
SET IDENTITY_INSERT [remoteservername].Library2005.dbo.tblLanguages ON
but that results in the error:
Msg 8103, Level 16, State 1, Line 1
Table 'remoteservername.Library2005.dbo.tblLanguages' does not exist or cannot be opened for SET operation.
I read in another topic, that I should change this into the following:
EXECUTE [remoteservername].Library2005.dbo.sp_executesql N'SET IDENTITY_INSERT dbo.tblLanguages ON'
That command executes without error, but the problem is that I cannot perform the actual insert, because it is not within the execute statement. In other words, the following doesn't work:
EXECUTE [remoteservername].Library2005.dbo.sp_executesql N'SET IDENTITY_INSERT dbo.tblLanguages ON'
INSERT INTO [remoteservername].Library2005.dbo.tblLanguages
(colLangID, colEnglish, colGerman, colSpanish)
SELECT colLangID, colEnglish, colGerman, colSpanish FROM tblLanguages
This results in the error:
Msg 7344, Level 16, State 1, Line 2
OLE DB provider 'SQLOLEDB' could not INSERT INTO table '[remoteservername].[Library2005].[dbo].[tblLanguages]' because of column 'colLangID'. The user did not have permission to write to the column.
The remote server is linked correctly on my end via the sp_addlinkedserver and sp_addlinkedsrvlogin. Is there any way to force the remote server to turn IDENTITY_INSERT ON permanently and then let me execute as many INSERTS as I want and then turn it back OFF?
View 2 Replies
View Related
Aug 13, 2015
Below is a XML column data. How to get the Id and respective Names for "Case Manager" Dropdown ONLY in SQL server 2008. I don't want to get anything related to "Intake Staff" drop down.
<DropDown Prompt="Case Manager" Column="case_manager" AddOnly="false" ReadOnly="false" Required="false" CanHaveNotes="no" LabelCssClass="" IndentLevel="1" FirstEntryBlank="false" CssClass="" DefaultValue="" ChoiceType="1">
<Items>
<Item Id="1">ABC</Item>
<Item Id="2">DEF</Item>
<Item Id="3">GHI</Item>
<Item Id="4">JKL</Item>
<Item Id="5">MNO</Item>
[code]....
View 1 Replies
View Related
