How To Get A Report To Show A Mismatch In System And DNS Names

Feb 5, 2014

I am new to SQL programming and I am trying to figure out how to get a report to show a mismatch in System Names & DNS Names. Both of the columns are in a table called nodes.

System Name router-1-dc and the DNS would be router-1-dc.domain I am trying to find Nodes that don't match to the "." prior to the domain example for this would be System Name "router-1-datacenter" and DNS Name "router-1-dc.domain" I would want this example to show on the report page.

Here is the SQL Query I built however it does not appear to be working as I need it too.

SELECT N. NodeID, N.Caption, N.SysName, N.DNS, N.IP_Address, N.Device_Type
FROM (
SELECT Nodes.NodeID, Nodes.Caption, Nodes.SysName, Nodes.DNS, Nodes.Device_Type, Nodes.IP_Address
FROM Nodes

code]...

View 4 Replies


ADVERTISEMENT

Show Field Names/Schema

Jan 15, 2004

I can't seem to find a sample code, either here or on the net - - so I'll go ahead and ask...

What I'm looking for is a sample of how to query a database, so that I can populate a listbox with the table names from a database - - and then, populate another listobx with the field names from the database, in order to build a user-driven sql statement builder....

either of the above (at least the field name part) - either a code sample, or a link, will be greatly appreciated) - -

Thanks

View 1 Replies View Related

Analysis :: Show Dimension Names In MDX Query Result

Oct 28, 2015

I am facing an issue in MDX Query. I have a custom MDX query, When I run the query I am getting results too. Now my requirement is to show the dimension names in the query result, So that I can get those header names in the cell set itself. Please see the below image.

In this image I need to show 'Fiscal Year' and 'Fiscal Quarter' in that highlighted area. Is there any custom query for this?

View 3 Replies View Related

How Do You Show Your Source Code Using A System St

Feb 28, 2008

In SQL Server 2005, how do you list your source code of a specific procedure using a system stored procedure?

Thank you for the help!

View 1 Replies View Related

List The System Names Has Sql Server Installed

Jun 30, 2005

hi,I need to display the system names which has sql Server installed. How it can be done in vb.net. Help me plzregardsSomu

View 1 Replies View Related

How Do I Build An Ad-hoc Report To Show Top 50 Using Only Report Builder?

May 25, 2007

Hi all,



I'm very new to report builder and I don't even know if this is possible. Some of my users have asked if they can build an ad-hoc report to show say top 50 annual salaries. This has to be done soley with whatever report builder has for building ad-hoc reports as that's all the users have access to.

Any help would be most appreciated. Thanks.

View 1 Replies View Related

SQL Security :: Server Won't Start After Mistyped System Database Names When Moving Them To New Location

Apr 24, 2015

I'm using SQL Server 2012 and was attempting to move the msdb, model, and tempdb databases to a new location and accidentally gave their log files an mdf extension instead of ldf when providing the new pathfilename.  After the server wouldn't start I checked my script and noticed my error.  I have good backups of my system databases, so I was hoping to start the MSSQLSERVER service in single-user mode (using the -m startup parameter) and then just restore master using sqlcmd. 

Unfortunately the service was starting but I couldn't connect via sqlcmd using any of the three protocols (it said the server was not found or not accessible each time).  I also tried using the dedicated Admin connection but I got the same error.  Then I went into the Templates folder and copied the master, msdb, model, and tempdb templates into the DATA folder and tried to restart SQL Server but still no luck (now the MSSQLSERVER service won't start at all).  Is there an easy way to fix this mess without having to reinstall from the setup application?

View 8 Replies View Related

How To Acces Report Of Other System From My System.

Feb 10, 2007

Hi,
Im Designed a Webpage .It consosts of a Button, whenever i click on
Button report must generated.When the report is in my system report
generated successfully.when I try to access a report from other
system.I cudnot able to access report.Can any1 hlp me inthis aspect
.any procedure in order to access the report of other system.wht shud
be url for Reportserverurl and reportpath.In short



When i click on btn i shud get report of other system.what previleges shud be given for other system in other to access





With regards,

mahender

View 3 Replies View Related

Report Does Not Show A Table

Jun 8, 2007

Hi,



We have a report published to two report servers ( same configuration). this report displays data in two side by side tables. on server 1, the left side table does not get displayed where as both the tables show fine on server 2.



What could be the reason for this



Any help greatly appreciated.



Thanks,

Phani

View 3 Replies View Related

Report Sometimes Just Doesn't Show

Jan 18, 2008



Hello,

Since a week we have a strange problem.
We are using SQL Server 2005 with SP2 on a Windows Server 2003 updated last time in November. We have 2 servers like this, one is a virtual machine and the second one, a physical one.

Since a week, sometimes, the reports in the web report viewer just don't show. They keep loading for hours without showing anything. Beside, everything's fine, the server has plenty of free resources (CPU, RAM...), Visual Studio works normally, SSMS too. We can even go in http://localhost/reports and http://localhost/reportserver and see the folders, files etc... but when trying to load a report (what ever it is, even a small one) nothing comes, not even the message "Report is loading".

It happens not every day, sometimes two or three times a day at different hours.
In the Windows event viewer, nothing.
In the SSRS logs, nothing (as far as I can understand these logs).

It looks as if a job or a process was running and was blocking the reports or a service which would stop automatically.
To have it work again, a reboot of the server works or within 2 or 3 hours, it comes back to normal state.

If someone has an idea of what can be the problem or some tips, please feel free because we are running out of ideas.

Thanks in advance

View 10 Replies View Related

Compute Sum Result Cannot Show In Report?

Aug 23, 2014

How to display sql compute sum command their result in amount and qty in report?

I am try this query is successful show the total amount and qty in studio management server and show in screen. But run this query on report is without to show last column of qty and amount, why ?

select
xsodetail.shopcode,xsodetail.memono,xsodetail.txdate,
xsodetail.sku,xsoheader.depositamt,xsopayment.paymentcode,xsopayment.paymentamt,
xsodetail.itemamt,xsodetail.salesqty

from xsoheader
inner join xsodetail on xsoheader.shopcode + xsoheader.memono = xsodetail.shopcode + xsodetail.memono
inner join xsopayment on xsoheader.shopcode + xsoheader.memono = xsopayment.shopcode + xsopayment.memono
where (xsodetail.sku = 'L000254' or xsodetail.sku='L000256') and xsoheader.voidflag='N' and xsodetail.txdate = CONVERT(varchar(100), GETDATE(), 112)
compute sum(xsopayment.paymentamt) , sum(xsodetail.salesqty)

View 2 Replies View Related

Report Doesn't Show Up Any Values

Jan 28, 2008

Hi,

I've designed a report and assigned it a datasource that binds with a SP with a parameter. In the XML code of the dataset I can see the input parameter has been recognised by the wizard. Then, I built a report with that Dataset as the source. Everything is fine till this time. Now through my aspx code I pass on the value of the parameter to the report. But the report doesn't show any values at all. The aspx code is like



Code Snippet
Dim reportParameter As New ReportParameter("@UserID", Convert.ToInt32(TextBox1.Text), True)
Dim test() As ReportParameter = {reportParameter}
ReportViewer1.LocalReport.SetParameters(test)

Any ideas what I could be doing wrong?
VS 2005 & SSRS 2005.
TIA.

View 2 Replies View Related

How To Show 2 Or More Multy Row Reports On In One Report

Oct 26, 2007

I have two seperate reports that have parameter clientkey in common. I want to show on one report these 2..first the one, then the 2nd below it. I've tried jsut using 2 tables but they overlap. I'm now trying a subreport, but I'm not sure how to do this or even if it is the right method.

View 1 Replies View Related

Is There A Way To Have A Hide All/Show All In Drill-down Report ?

Apr 10, 2007

Hi all,



I was wondering whether there was a way to implement a "Hide all/show all" option in the report. are there any examples that I could refer to ?



Thanks !

Bernard

View 8 Replies View Related

Show/hide Report Columns

Aug 29, 2006

Hello,

I'm currently investigating whether SQL Reporting Services might be the right solution to some reporting requirements I have been given (web reports).

There is a requirement that some of the columns are hidden to begin with and can be shown by clicking on the header of one of the other columns. E.g. There is a list of clients and a "Total Revenue" column, clicking on the "Total Revenue" column header would show an additional 5 or so columns which show a breakdown of different figures that make up the total revenue.

So my question is this: Is it possible to show/hide columns by clicking on the headers of other columns in the report?

Thanks,

Lachlan

View 6 Replies View Related

How Can I Show My Report As An HTML File?

Aug 4, 2006

How can I create a script so that the field, when hyperlinked in the report, will open as an HTML file?

View 2 Replies View Related

Report To Show Last Time All SQL Reports Were Run

Oct 4, 2007

I was curious to know if there is a way to create a report that will show when the last time all reports on our server were run. We have a lot of reports on our server made by multiple people that may or may not be in use anymore and we're trying to clean this up a bit. I am currently running SQL Server 2000. I realize there is a history that each report has and I'm wondering if it's possible to pull from that if it is stored somewhere that is accessible. Any help or direction would be much appreciated as I am not even sure where to start.....

View 9 Replies View Related

Two Different Datasets With Same Field Names Used In Same Report

Oct 10, 2007

I am having two datasets in the same report, the column names are the same, in both the datasets, Now How can I use the individual fields in same report.
If I use (Fields!xyz.Value, "dsDataSet1") and (Fields!xyz.Value, "dsDataSet2")
It is giving me syntax error.

How can I use both these fieds, I do not want any aggregates

View 7 Replies View Related

Report Model Attribute Names

Jan 25, 2008

Hi,

I have many lookup tables in my report model. I have tried renaming these fields to more accurately represent the attributes meaning to the end user but I'm having trouble with it.

Here's an example:

I have a table which contains two fields; OfficalGrade and SpecifiedGrade. Both are FK integer values pointing to a Grades lookup table with GradeID as the PK.

In the report builder, the official grade and specified grade fields are both being displayed as GradeID so it's impossible for the user to tell which is which.

In the report model, the Grades Entity has a role for Offical Grade and another for Specified Grade. I've checked both of their properties but I cannot find a setting which will allow me rename the value that is available to the end user.

I'd greatly appreciate any advice on fixing this!
John

View 4 Replies View Related

How Do You Get The Last Child Of A Report Parameter To Show Up As A Default

Jan 1, 2007

Dataset "FromTimeDimension" is a report parameter and has values (yyyymm)= 200601,200602,200603,2000604....... I would like to always have the default for this parameter to always be the latest month...ie November is the most recent month in our cube, so I would want the parameter to default to "200611". However, when I try to use the "last" function, the error says that aggregate function cannot be used.

View 3 Replies View Related

How To Show Partial Report Based On User

Mar 18, 2008

Hi, I am new to SSRS. Is there a way to show part of a report based on User. Say we have a report consisting data for all department. When a department director view it, the report only display data for his/her department. Can this be achieved in SSRS? Thank you in advance for your help.

View 3 Replies View Related

Report Manager And The Show Details Button

Jan 24, 2008

I've read posts that state it is impossible to remove the "Show Details" button on the tool bar in Report Manager.

I created a new role assignment for an individual on a folder with the "Browse" role only.

When that individual navigates to the folder and clicks the "Show Details" button, the "Delete" and "Move" buttons also appear on the tool bar, with a checkbox next to each report item.

I can't have a folder where my users have the ability to delete or move my published reports!

Am I missing a setting? Again, the user has the "Browse" role only on the folder.

Thanks.

View 10 Replies View Related

ReportViewer Does Not Show Report In Aspx Page

Jul 13, 2007

I created a report with a parameter. The parameter was created using a dataset in the report designer. This works fine. I deployed the report (webhost4life) and the report runs fine in the report manager. I am able to select my casenumber click on the default view report button and it works.

Problem: I embedd the report into an aspx page frmReports1.aspx. I call this page from another page (form). the frmReports.aspx page comes up and displays the default drop down list box with the casenumbers (fine). I select the casenumber and click on the view report button and NOTHING. I here the postbacks taking place but all that happens is the default value appears in the drop down list box and the toolbar shows. I checked permissions and everything is fine. I searched the forum and thought i found the solution with the inLine HTML and Async (still nothing) I can only think that something is not going right with the parameter. Here is my html, and code behind code. any help would be greatly apprcieated.



Zachary



<%@ Page Language="VB" AutoEventWireup="false" CodeFile="frmReports1.aspx.vb" Inherits="frmReports1" %>

<%@ Register Assembly="Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"

Namespace="Microsoft.Reporting.WebForms" TagPrefix="rsweb" %>



<%@ Register Assembly="Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"

Namespace="Microsoft.Reporting.WebForms" TagPrefix="rsweb" %>





<html xmlns="http://www.w3.org/1999/xhtml" >

<head runat="server">

<title>Untitled Page</title>

<style>html,body,form {height:100%}</style>

</head>

<body>

<form id="form1" runat="server">

<div>

<rsweb:ReportViewer ID="rvTest" runat="server" Width="600px" ProcessingMode="Remote" AsyncRendering="false" Height="75%" >

<ServerReport

DisplayName="Billable Hours"

ReportPath="/sddmtech/SnowandIce/rptHoursWorked"

ReportServerUrl="http://sqlreport01.mysite4now.com/Reportserver" />

</rsweb:ReportViewer>

&nbsp;



</div>

</form>

</body>

</html>



aspx code behind

Imports System.Net

Imports System.Security.Principal

Imports Microsoft.Reporting.WebForms

Partial Class frmReports1

Inherits System.Web.UI.Page

Protected Sub rvTest_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles rvTest.Init

End Sub

<Serializable()> _

Public NotInheritable Class MyReportServerCredentials

Implements IReportServerCredentials



Public ReadOnly Property ImpersonationUser() As WindowsIdentity _

Implements IReportServerCredentials.ImpersonationUser

Get

Return Nothing

End Get

End Property

Public ReadOnly Property NetworkCredentials() As ICredentials _

Implements IReportServerCredentials.NetworkCredentials

Get

' Put your login and password here this works fine

Dim userName As String = ""

Dim password As String = ""

Dim domain As String = ""

Return New NetworkCredential(userName, password, domain)

'********************************************************************************

End Get

End Property

Public Function GetFormsCredentials(ByRef authCookie As System.Net.Cookie, ByRef userName As String, ByRef password As String, ByRef authority As String) As Boolean Implements Microsoft.Reporting.WebForms.IReportServerCredentials.GetFormsCredentials

End Function

End Class

Public Function GetFormsCredentials(ByRef authCookie As Cookie, _

ByRef userName As String, _

ByRef password As String, _

ByRef authority As String) _

As Boolean

authCookie = Nothing

userName = Nothing

password = Nothing

authority = Nothing

'Not using form credentials

Return False

End Function



Protected Sub form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles form1.Load

'ReportViewer1.ServerReport.ReportServerCredentials = New MyReportServerCredentials()

'rvTest.ServerReport.Refresh()

End Sub

Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load

rvTest.ServerReport.ReportServerCredentials = New MyReportServerCredentials()

End Sub

End Class

View 6 Replies View Related

Subreport Doesn't Show On The Main Report

Jun 5, 2007

Here's my problem. I have a subreport that shows data and labels if data is returned. However, if no data is returned, the subreport doesn't show at all. I have a message on the subreport I would like to show if no data is returned, but the subreport won't show at all. Any ideas??



Thanks

View 1 Replies View Related

Show The Data Of A Report For Previous Month

Nov 14, 2007

Can we show the data of a report for previous month? The report is supposed to run montly basis. But once it is run, it shows the data only for the previous month.

we can show it if its only for previous day. In this case it is like this;

cdtable.SubmittedDate = GETDATE () - 1

But I dont find function like GETMONTH() or smthing.

Thanks

View 1 Replies View Related

Report Builder Doesn't Show Models

Apr 30, 2007

Hello,



When I open Report Builder I do not see any of the models that I've created. The "Select Site or Server" is blank and I cannot get to any of the models. I can't change the dropdown from "Recent Sites and Servers."



I am not sure what I did, because it used to work. I did install SP2 but that did not cause a problem originally.



I can create new models (on both the BIDS and the ReportServer site) and I see that they were created just not in Report Builder. At this point Report Builder is non-functional for me.



The other thing that may be related is that I've never been able to run Report Builder from the website. When I click the button nothing happens. I made a shortcut to ReportBuilder.exe to get around this.



Thank you for the help.



-Gumbatman

View 2 Replies View Related

How To Show Duplicate Rows In Report Builder ?

Mar 30, 2007

Hi!
I've created a report in Report Builder, based on a query. When I run the report in Report Builder, it doesn't show the duplicates rows, even if it works fine in Data source view.

How can I see al rows in Report Builder(even if they're duplicates) ?

Thank you in advance.

Best regards,
VV

View 1 Replies View Related

Show The Data Of A Report For Previous Month

Nov 14, 2007

hi,

Can we show the data of a report for previous month? The report is supposed to run montly basis. But once it is run, it shows the data only for the previous month.

we can show it if its only for previous day. In this case it is like this;

cdtable.SubmittedDate = GETDATE () - 1

But I dont find function like GETMONTH() or smthing.

Thanks

View 3 Replies View Related

Scheduled Report For Database Names And Sizes

Jul 20, 2005

Does anyone has a script which gives all databases names and thereallocated, used sizes in SQLserver2k. I want to schedule this to create adaily report.Thanks,Nasir

View 1 Replies View Related

Using Values Returned From SQL For Report Column Names

Apr 17, 2008

I am building reports against our TFS development db.
One of the reports tracks days spent (Dwell Time) in various status categories (eg: New, Assigned, In Development, Hold, etc) for a given "ticket".
For a fixed list of values from {Work Item].System_State, I can send the results (days in Assigned) to the column named (Assigned) for each status for each event in the [Work Item History], and then sum them for each ticket as:
Ticket ID New Assigned InDev etc
1230001 2 0 0 ...
1230001 0 1 2 ....

SUM 2 1 2 ....
However, I have many different Projects, each of which use their own Status names.
I don't want to duplicate the same basic report, if I can avoid it.

How can I name and generate this data for the unique Status list for each Project?

Simplest analog is: name = First(Fields!Status.Value, "TFSdb")
and allows value for a column name (category) as: =IIF(Fields!Status.Value = First(Fields!Status.Value, "TFSdb"), Fields!Days.Value, 0)
However this fails beause:
1. It only delivers the FIRST status value, and,
2. I cannot SUM an expression which is itself an aggregate (using First).

View 4 Replies View Related

To Get Details Of Column Names From An Existing Report

Mar 25, 2008

All,

I want to retrive the column names from an existing report. The report is deployed on the report server and i want to write a code which will list all the column names of the reports along with the properties.

Is there any way i can do this. If so , please let me know. A code sample should help.

Regards..
Girija Shankar

View 3 Replies View Related

Render RS Report To Excel And Changes Sheet Names

Jun 1, 2006

I am wondering if anyone knows how to change the sheet names in Excel when exporting a report from Reporting Services 2005. In other words, I have a report with approximately 5 page breaks built in. When I render the report to Excel, it creates the 5 sheets as I expect, but it names them "Sheet1", "Sheet2", "Sheet3" etc... Is there a way to specify the name of the sheets? I am currently using a different table in my report for each sheet, but I am open to structuring this differently if needed.

View 9 Replies View Related

Reporting Services :: How To Show Databars Using SSRS Report

Nov 2, 2015

Requirement to display Databar in SSRS report. Refer the below example:

How to achieve the above outcome.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved