hello i am new to sql server 2000.
i am one of the user of database and in that user i created store procedures.
now i want to create another user and give that user to permission of excute all my proceudres and i also give him privillages such a way that user can also modify my procedures...
so can u assist me on that...
thanks in advance...
I am creating a login with a user in one database. The id has to
create procedures in the dbo schema, execute them, and grant execute on them to other users.
BOL says to
GRANT ALTER ON SCHEMA::DBO TO username ;
GRANT CREATE PROCEDURE TO username ;
I did that. User can now create procedures, but cannot execute what he creates. And cannot grant execute on the sp to anybody.
I don't want to give this id a lot of priviledges.
Hey guys,I'm pretty new to SQL configuration, and I need to give EXECUTEpersmissions for one of the SQL user roles. I am running SQL 2005Management Studio Express - free version. I found the list of mystored procedures, but I can not locate any permissions screen. Cansomeone help point me in the right direction? Thanks!
View 7 Replies View RelatedOn our production SQL 2005 servers I want to give developers readonly access to each user database and also give them the ability to see stored procedures. Readonly is handled through db_datareader, but how do I give them the ability to see stored procedures without granting permission to execute them?
Thanks, Dave
GRANT SELECT ON [dbo].[TblAreaCatmap] TO [admin] prevent grant from being automaticly add to each column?
Is there a way when you issue a grant select to a table or a view to not also grant select for each column.
The problem is when you use the grant command it automaticly adds the grant command to each column. I want to grant the permission at the table level so when the table is scripted it only has a single grant command instead of a grant for the table and a grant for each column which is not needed.
The sql managemnt studion interface will allow you to do this but onlt by using the interface. If you issue the above command from a query window it also creates A GRANT FOR EVERY COLUMN. How can I stop this behavior.
I am writing a stored procedure which updates a table, but when I run the stored procedure using a login that I have granted execute privileges on, then I get a message that I cannot run an update on the table. This would happen in dynamic sql... while my SQL has parameter references, I don't think it is considered dynamic SQL?
sproc:
CREATE PROCEDURE [schemaname].[SetUserCulture]
@UserID int
, @Culture nvarchar(10)
AS
UPDATE dbo.SecUser
SET Culture = @Culture
WHERE UserID = @UserID
execute SQL:
EXEC schemaname.SetUserCulture @UserID = 9, @Culture = N'x'
error:
The UPDATE permission was denied on the object 'SecUser', database 'DatabaseName', schema 'schemaname'.
In SQL Server 2005 SP2 I want to grant the ability to create views to a user but in order to do this it requires that the users has the ability to grant alter on a schema.
Is there any way to grant this privilage without granting alter on schema also?
Have a certificate and symmetric key that i have used the following to GRANT to logins. How can I find out which SQL logins have the GRANT CONTROL and GRANT VIEW DEFINTION?
GRANT VIEW DEFINITION ON SYMMETRIC KEY:: Symetric1 TO Brenda
GRANT CONTROL ON CERTIFICATE:: Certificate1 to Brenda
hi everyone :)
I've got a store procedure(sp) on the database side ( MS SQL 2000 )
and want to access the sp via ASP.net
so simply I have got few textboxs, which I am getting the values from and I need to pass this data to my sp and get an output of a string from my sp.
I've tested the SP and it does work fine
can you just give me a template of how to access the sp from ASP.net
mant thanks indeed
M
Can anyone plz tell me what kind of store procedures DBA's needs to write or DBA needs to know?
View 2 Replies View RelatedHi:Does anyone know if IBM (or any other IT Software company) offers storeprocedure classes anywhere in the country?ThanksMarc
View 2 Replies View RelatedHi guys, I want to know if it is possible to retrieve the fieldnames that a
Stored Procedure return, without executing this StoreProc.
Thank you
All,
I have beating my head over this and have asked questions to clear this up in small bits.
In trying to get all of my business processes in stored procedures versus in the ASP pages. The ASP page is as follows:
--Normal ASP header
<%
myquery = "Exec MainSysLogQuery '6ED178C0-0202-4F8D-9C04-4C7B83A14190'
'Set Conn = Server.CreateObject("ADODB.Connection")'Set Connection Variable
Set SysMainQuery=Server.CreateObject("ADODB.Recordset" )
SysMainQuery.open "Select * from tbl_Date", strDSNPath
howmanyfields=SysMainQuery.fields.count -1
response.write "<table border='1'><tr>"
'Put Headings On The Table of Field Names
FOR i=0 to howmanyfields
response.write "<td NOWRAP><Font Size=2><b>" & SysMainQuery(i).name & "</b></td>"
NEXT
response.write "</tr>"
' Now loop through the data
DO WHILE NOT SysMainQuery.eof
response.write "<tr>"
FOR i = 0 to howmanyfields
fieldvalue=SysMainQuery(i)
If isnull(fieldvalue) THEN
fieldvalue="n/a"
END IF
If trim(fieldvalue)="" THEN
fieldvalue=" "
END IF
response.write "<td valign='top' NOWRAP><Font Size=2>"
response.write fieldvalue
response.write "</td>"
next
response.write "</tr>"
SysMainQuery.movenext
'howmanyrecs=howmanyrecs+1
LOOP
response.write "</table></font><p>"
' close, destroy
SysMainQuery.close
set SysMainQuery=nothing
%>
</body></html>
The stored procedure takes the input an returns the sql statement:
Alter Procedure MainSysLogQuery
@myDates nvarchar(200) = '',
As
declare @oSql nvarchar(4000)
declare @viewtmp nvarchar(3000)
declare @querytmp nvarchar(3000)
declare @wheretmp nvarchar(3000)
declare @ordertmp nvarchar(3000)
declare @tmplen int
Set @wheretmp = ''
Set @tmplen = 0
if @myDates != ''
Set @wheretmp = @wheretmp + 'tbl_All_SysDATA.dateid = ''' + @myDates +''''
If len(@wheretmp)>0
Set @wheretmp = ' WHERE ' + @wheretmp
print @wheretmp
Set @viewtmp = 'SELECT *'
Set @querytmp = ' FROM tbl_All_SysData'
Set @ordertmp = ' ORDER BY LongDate DESC'
Set @oSQL = @viewtmp + @querytmp + @wheretmp + @ordertmp
PRINT @oSQL
Exec(@oSQL)
Go
The problem is I keep getting:
Error Type:
ADODB.Recordset (0x800A0E78)
Operation is not allowed when the object is closed.
It returns the recordset when I call it from SQL Query Tool but not in the ADO object. If I use a regular SQL statement it works get but not with a Stored Procedure....
The Errors are on on the recordset.eof, recordset.movenext, etc....
Has anyone ever run into this?
Thanks
~Lee
How would you set up a group of developers-application programers in SQL 6.5 to let them have authority so that they all can store, update, delete, & execute each others stored procedures, within a particular database.
They are not permitted to modify the table structures within a data base, but I can not seem to let them have authority so that
they can work on and execute any of their sp's unless the DBO actually does the sp modifications? They do not want to modify any code by putting the sp owners name in front of the sp name (I don't blame them), otherwise Error 2812 results.
TIA for all you responses
hi,
what is the different between store procedure and function?
when it is right to use sp and when functions?
thanks in advanced
I am developing a complex database-driven application with SQL Server 2000. My database has dozens of stored procedures, and whenever I want to rename a database field, I have to go through my stored procedures, finding where that field is used. This is a laborious and error-prone process, even when I look up depenencies.
Is there an easier way to work stored procedure code – some tool to search/replace the text perhaps?
Hello, can anyone offer any advice on this problem related to store procedures.
The following 2 chunks of SQL illustrate the problem
--1
declare @lsFilt varchar(16)
select @lsFilt = 'fil%ter'
select * from sysobjects where name like @lsFilt
--2
declare @lsQuery varchar(128)
select @lsQuery = 'select * from sysobjects where name like ''fil%ter'''
exec (@lsQuery)
When I view the execution plan the cost % breakdown is approx 82%, 18%. The second query does a bookmark lookup and an index seek while the first slow query does a clustered index seek and takes approx 5 times longer to do.
Now my real question is suppose I have an store procedure to run a similar query. Should be writing my SPs along the lines of
create proc SP2Style
@psFilter varchar(16)
AS
declare @lsQuery varchar(128)
select @lsQuery = 'select * from sysobjects where name like ''' @psFilter + ''''
exec (@lsQuery)
GO
instead of
create proc SP1Style
@psFilter varchar(16)
AS
select * from sysobjects where name like @psFilter
GO
Is there another way to write similar store procedures without using dynamic query building or the exec but keep the faster execution speed?
thanks
Paul
I recently set up a new sql 2005 standard edition and planning to mirgrate our production sql 2000 data. but only the tables were migrated from the copy data or import / export task. I cannot find a way to recreate the store procedures and views on the new server without create one view and one store procedure at a time unless all hundreds of views and procedures were rescripted. can anyone help
Thank
Andy Wong
awong@virginiadare.com
Can any one please tell me where i am going wrong..
Code Snippet
create proc SP_PercentageRMU
as
SELECT cast (sum([Usage Qty]) as [decimal] (28,8))as 'TUsageQty'
,RAW_MATERIAL
into #TZMelt_Pound
FROM [LatrobeOCT].[dbo].[ZMelt_Pound]
group by RAW_MATERIAL
GO
select [Usage Qty],(case when r.raw_material = z.raw_material
then cast ((r.[usage QTY] / z.TUsageQty) as decimal (28,8))
else 0
end) as '%UsageQty'
,r.[PRODL]
,r.RAW_MATERIAL
,r.[GRADECODE]
into #PZMelt_Pound
FROM [LatrobeOCT].[dbo].[ZMelt_Pound]r
inner join #TZMelt_Pound z on r.raw_material = z.raw_material
drop table #TZMelt_Pound
go
error
Msg 208, Level 16, State 0, Line 2
Invalid object name '#TZMelt_Pound'.
I am trying to call DB2 stroe procedure from within SQL server 2000 using DTS. I have the IBM odbc driver installed on the server. I have created an ACtiveX script to run in DTS and it fails staing it could not findor load the DB2 store procedure.
Has anyone come across doing this and how they did it?
THanks for the help....
Our company purchased a app. Is there any way to find out which store procedures were fired once a button was clicked?
View 3 Replies View RelatedI do have very old versions of duplicate store procedures on my databases. I know there is no "safe" way to do this using DMVs, so I am planning to combine that with a trace. But I would like to get others opinions about that.
Here's the DMV I am planning to use:
SELECT
CASE WHEN database_id = 32767 then 'Resource' ELSE DB_NAME(database_id)END AS DBName
,OBJECT_SCHEMA_NAME(object_id,database_id) AS [SCHEMA_NAME]
,OBJECT_NAME(object_id,database_id)AS [OBJECT_NAME]
,cached_time
,last_execution_time
,execution_count
[Code] ....
I will save that on a local table and run it every 5 min maybe? Or at an interval equal or lower than PLE?
Hi
all i need little help regarding stored procedure.
i have some job say ".one." that runs daily on sql server agent But i have some holiday schedule as well in database
suppose if a holiday come and i want to stop that job on sql server agent on that particular holiday.
can anybody help me writing it ..
how to do it by calling SQL server agent to stop and start with date in stored procedure.
Regards
Hi guys , may I know is that possible to create multiple store procedures in 1 time using 1 SQL statement? Thx for the assistance.
Best Regards,
Hans
In a report called ICD_PrivateHospital, I have designed to show output to two table from two store procedures. 1st store proc: usp_RPT_Private and 2nd store proc: usp_RPT_Private2.
I have created both the store procs and it is executing successfully. I also have designed the Crystal Report in Visual Studio 2008.
I have added both the store procs in the crystal report with no error. I only wants to show top 20 records. It is running successfully when I add the fields and parameters from the first store procedure. But when I add the 2nd store procedures fields into the report, duplication occurs for both the results in store proc 1 and store proc 2. How to solve this issue?
Hello there
I have several developers working on different systems but same database; these developers make Store Procedures and all utilize these SP€™s; at the moment our SP list grows and keeps about 200 + SP's, whereas I expect a lot more to come.
Now I want to organize the SP''s under certain folders; example by the System and underneath by User name so that traceability of the work can be easy as well as organization of the SP's will be achieved.
I cannot find any way how to customize the Store Procedure node; and create folder underneath.
I know the filter option helps for searching the SP's but we also have remote users who are working somewhere away from us; so I want to get their work only by filtering the folder of these user name and also sometimes I need to know who made these SP's so that that developer can fix or alter the procedures.
We may do this using security instead of dbo, the developer who is creating the procedure will carry his name; but this needs tight security and we are in the phase of testing and lot of changes occurs on daily basis which requires little loose security till we pass this phase.
Any Idea or suggestions to make it viewable and accessible and copy the work of the specific users right away; rather than searching his Sp's, with the coordination of the user or with the maintained documentation.
How does one pass into a Stored Procedure an array of numbers to be used in an IN clause? If I pass "1,2" in a VARCHAR, the stored procedure sees only the first number (1 in this case).
I'm using VB and ADO.NET, but I don't know how to set up the stored procedure for an array. Is there a parsing function to do this?
CREATE PROCEDURE TestInClause( @TeamList VARCHAR)ASSELECT Name FROM Teams WHERE TeamID IN (@TeamList); /* sees only 1st number */GO
who i can to list the content of all store procedures and funtions in text file ?
View 3 Replies View RelatedHow does MicroSoft store the stored procedures in seperate files.What tools are used.Cause that's what I like to do too.Arno de Jong,The Netherlands.(SCPTFXR does not have the option to store the stored procedures indifferent filesI think)
View 2 Replies View Related
I am able to use user data types for creating local temporally tables in store procedures, but I receive an error at run-time about the user data type.
Msg 2715, Level 16, State 7, Procedure SP_SAMPLE_TEST, Line 4
Column, parameter, or variable #1: Cannot find data type D_ORDER_NUMBER.
The same user data type is used as parameters in several other store procedures, and they work perfect. It is also used in several table definitions.
What am I doing wrong?
Thanks in advance to any one who can help me with this problem.
Diego Sierra
how i can do a script to export tables,store procedures and data in SQL Server Management Studio Expres
I just arrive to do a script for tables and stores procedures
help please
I have tried and tried to get this to work and I'm doing something dumb.I'm going to include sample data and my format file. Can someone helpme figure out my dumb mistake on a bulk insert using a format file?Don't worry about data types, I'll handle that later. Thanks a lot!!!CSV File:ID,NAME,SPEC_ORIGINAL,SPEC,CATEGORY,ADDRESS1,CITY, STATE,ZIP,PHONE,COMPETITOR,PLAN,HARVESTDATE,EIDs,EIDCount,sourceIds,minS core,maxScore,hasContract,matchFilter,matchFilterBGR,matchFilterCAS,matc hFilterMTV,forceMatch,forceMatchUserId,paymentPlatforms,matchStatusColor ,recordId,dupId,NetworkComparedTo1,name1,Family Practice General Practice,FP,PCP,address1,DeerfieldBeach,FL,33442,phone1,C1,PPO,5/15/2004,1000067851,2,BADG_0874992,9,14.4,Y,Y,Y,Y,Y,0,,3,G,1, ,netcomp12,name2,Family Practice GeneralPractice,FP,PCP,address2,Margate,FL,33063,phone2,C 2,PPO,5/15/2004,1000067851,2,BADG_0874992,9,10,Y,Y,Y,Y,Y,0,,3,G,2, ,netcomp23,name3,General Practice,GP,PCP,address3,DeerfieldBeach,FL,33442,phone3,C3,PPO,5/15/2004,1000067851,2,BADG_0874992(14.4Y)|BADG_1901859,9,14.4,Y,Y,Y,Y,Y,0,,3,G,3, ,netcomp34,name4,ReproductiveEndocrinology,OBEN,OB,address4,Davie,FL,33328,phon e4,C4,PPO,5/15/2004,1000083687,1,CAS_650410436,10.3,10.3,Y,N,N,N,N,0,,0, Y,4, ,netcomp4Format File:8.0311 SQLCHAR 0 1 "
" 0 quote Latin1_General_CI_AS2 SQLCHAR 0 3000 "," 1 Provider_Raw_ID Latin1_General_CI_AS3 SQLCHAR 0 3000 "," 0 none_name Latin1_General_CI_AS4 SQLCHAR 0 3000 "," 0 none_Spec_orig Latin1_General_CI_AS5 SQLCHAR 0 3000 "," 3 SpecialtyCode Latin1_General_CI_AS6 SQLCHAR 0 3000 "," 2 Category Latin1_General_CI_AS7 SQLCHAR 0 3000 "," 0 none_Address Latin1_General_CI_AS8 SQLCHAR 0 3000 "," 0 none_City Latin1_General_CI_AS9 SQLCHAR 0 3000 "," 0 none_State Latin1_General_CI_AS10 SQLCHAR 0 3000 "," 0 none_Zip Latin1_General_CI_AS11 SQLCHAR 0 3000 "," 0 none_Phone Latin1_General_CI_AS12 SQLCHAR 0 3000 "," 0 none_Competitor Latin1_General_CI_AS13 SQLCHAR 0 3000 "," 0 none_Plan Latin1_General_CI_AS14 SQLCHAR 0 3000 "," 0 none_HarvestDate Latin1_General_CI_AS15 SQLCHAR 0 3000 "," 0 none_EIDs Latin1_General_CI_AS16 SQLCHAR 0 3000 "," 5 EIDCount Latin1_General_CI_AS17 SQLCHAR 0 3000 "," 0 SourceIds Latin1_General_CI_AS18 SQLCHAR 0 3000 "," 6 minScore Latin1_General_CI_AS19 SQLCHAR 0 3000 "," 7 maxScore Latin1_General_CI_AS20 SQLCHAR 0 3000 "," 8 hasContract Latin1_General_CI_AS21 SQLCHAR 0 3000 "," 9 matchFilter Latin1_General_CI_AS22 SQLCHAR 0 3000 "," 10 matchFilterBGR Latin1_General_CI_AS23 SQLCHAR 0 3000 "," 11 matchFilterCAS Latin1_General_CI_AS24 SQLCHAR 0 3000 "," 12 matchFilterMTV Latin1_General_CI_AS25 SQLCHAR 0 3000 "," 13 forceMatch Latin1_General_CI_AS26 SQLCHAR 0 3000 "," 14 forceMatchUserId Latin1_General_CI_AS27 SQLCHAR 0 3000 "," 15 paymentPlatforms Latin1_General_CI_AS28 SQLCHAR 0 3000 "," 16 matchStatusColor Latin1_General_CI_AS29 SQLCHAR 0 3000 "," 17 recordId Latin1_General_CI_AS30 SQLCHAR 0 3000 "," 18 dupId Latin1_General_CI_AS31 SQLCHAR 0 3000 "," 4 NetworkComparedTo Latin1_General_CI_ASHere's a script for the table!if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[Provider_Results]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)drop table [dbo].[Provider_Results]GOCREATE TABLE [dbo].[Provider_Results] ([Provider_Raw_ID] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_ASNULL ,[Category] [varchar] (3000) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[SpecialtyCode] [varchar] (3000) COLLATE SQL_Latin1_General_CP1_CI_ASNULL ,[NetworkComparedTo] [varchar] (3000) COLLATESQL_Latin1_General_CP1_CI_AS NULL ,[EIDCount] [varchar] (3000) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[minScore] [varchar] (3000) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[maxScore] [varchar] (3000) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[hasContract] [varchar] (3000) COLLATE SQL_Latin1_General_CP1_CI_ASNULL ,[matchFilter] [varchar] (3000) COLLATE SQL_Latin1_General_CP1_CI_ASNULL ,[matchFilterBGR] [varchar] (3000) COLLATE SQL_Latin1_General_CP1_CI_ASNULL ,[matchFilterCAS] [varchar] (3000) COLLATE SQL_Latin1_General_CP1_CI_ASNULL ,[matchFilterMTV] [varchar] (3000) COLLATE SQL_Latin1_General_CP1_CI_ASNULL ,[forceMatch] [varchar] (3000) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,[forceMatchUserId] [varchar] (3000) COLLATESQL_Latin1_General_CP1_CI_AS NULL ,[paymentPlatforms] [varchar] (3000) COLLATESQL_Latin1_General_CP1_CI_AS NULL ,[matchStatusColor] [varchar] (3000) COLLATESQL_Latin1_General_CP1_CI_AS NULL ,[recordId] [varchar] (3000) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[dupId] [varchar] (3000) COLLATE SQL_Latin1_General_CP1_CI_AS NULL) ON [PRIMARY]GOThanks again. I am dying on this one. With everything includedhopefully someone (smarter than me) can figure it out.Thanks,Andrew*** Sent via Devdex http://www.devdex.com ***Don't just participate in USENET...get rewarded for it!
Jag har installerat sql server 2008 (I have installed sql server)
I cannot find enterprise manager - I think that the sql server is useless unless there is a manager.