How To Insert Data Into Sql Table In Desired Format
Jan 25, 2008
Hello,
I have a problem the scenario is :
I have data in an excel file and now I am reading data from that file and insert that data into sql database. this is well.
but the problem is that I have few fields with date time data in excel sheet. In my database I have varchar type data type for these data columns.
I want to read these data columns from the excel sheet and insert only time into the data base.
how can I do this I am using the following line of code for selelcting only time from the excel file.
string qry = "Select CONVERT(CHAR(5),datetime,114) from [" + objStr[0] + "];";
this gives me error message.
help me to read the data from excel file and insert it into the sql table in desired format.
Thanks in advance,
junior
View 1 Replies
ADVERTISEMENT
May 5, 2008
Query:
Select convert(CHAR(45),surname+','+fname) Name from beneficiary
Output from the above query:
Name
---------------------------------------------
BICKFORD ,ROSA
KOCH ,ERIC
I am desired Results as follows: Please help
Name
---------------
BICKFORD,ROSA
KOCH,ERIC
View 8 Replies
View Related
Mar 18, 2015
Can we bulk insert only the desired column from a flat file to a table?
I am using SSIS to bulk insert from a file with more than 200 columns. I am trying to find a way I can bulk insert them to multiples table through SSIS.
The one way I can think is pre map the columns from the file to the destination tables. Build numerous Bulk Insert tasks to achieve that. But not sure if SSIS will let me do that.
View 4 Replies
View Related
May 23, 2008
Hi Guys,
Below is example of the current structure of table1 I have at run time:
------------------------
GroupName Resourcename Week1 Week2 ..cont.. dynamically
Associates A1 0 80 ......
Assocaites A2 20 40 ......
Associates A3 50 100 ......
Principal P1 20 100 ......
Principal P2 0 0 ......
Principal P3 0 100 ......
------------------------
I want to change the above to something like below table2:
---------------------------
GroupName Status Week1 Week2 ....cont
Associates Assigned 2 3
Associates NotAssigned 1 0
Principal Assigned 1 1
Principal NotAssigned 2 1
---------------------------
I will try to explain how I am deriving table2 from table1. I have to count the number of Resource name against each Groupname for a particular week column(Weeki i 1 to n dynamic) where value of Week column is 0, then use this numbber against NotAssigned and the complementary number to be stored as Assigned.
The table formaating is lost in HTML view but just consider any gaps between fields as next column value.
Am I clear in what i am asking , if not please ask me.
Any help will be highly appreciated.
View 2 Replies
View Related
Jun 28, 2007
Help please!
I have an asp page with some simple vbscript to add a record to a table, the record has a datefield (dob).
the insert results in a US formated date if I add a record to a dynamic recordset but a UK formated date if I insert direct to the table ?????
i.e.
if request("dob") is "01/11/2007" (1st november 2007)
set conn = server.createobject("adodb.connection")
set rs = server.createobject("adodb.recordset")
rs.open "tez", mc, 2, 2 rs.addnew
rs("dob") = request("dob")
rs.update
11 jan 2007 stored in table
while
set trs = Server.CreateObject("ADODB.RecordSet")
qfn= "insert tez values('"+request("dob")+"')"
trs.Open qfn,mc
results in
1 november 2007 is written to the table.
Both of these methods are used in the same asp page.
This is on a windows2003 server, sql2005,iisv6, asp.netv2
I have tried every setting I can find in iis,asp,sql server to no avail.
I need the recordset method to work correctly.
Terry
View 8 Replies
View Related
Apr 4, 2007
Hi. I am sitting here as a newbie programming my first web application.I have in my tables a column ‘Birthday’ declared as a smalldatetime (I only want to store year, month and day).Where Year, Month ans Days are dropdownlist.
Inserting the data I use this code:
Dim Birthday As New DateTime(Int32.Parse(Year.SelectedValue), Int32.Parse(Month.SelectedValue), Int32.Parse(Days.SelectedValue))-and then I use Birthday in my stored procedures.
Whan I look into my tabel is ses the value is stored like this: 12.01.1996 00:00:00
This is also the result if I change the column declaration from smalldatetime to DateTime.Is 12.01.1996 00:00:00 (mm.dd.yyyy) the correct value in my DB. I whould have expecetd dd.mm.yyyy or yyyy.mm.dd ?
Please avise.
View 4 Replies
View Related
Feb 26, 2015
I am writing a query to return some production data. Basically i need to insert either 1 or 2 rows into a Table variable based on a decision as to does the production part make 1 or 2 items ( The Raw data does not allow for this it comes from a look up in my database)
I can retrieve all the source data i need easily but when i come to insert it into the table variable i need to insert 1 record if its a single part or 2 records if its a twin part. I know could use a cursor but im sure there has to be an easier way !
Below is the code i have at the moment
declare @startdate as datetime
declare @enddate as datetime
declare @Line as Integer
DECLARE @count INT
set @startdate = '2015-01-01'
set @enddate = '2015-01-31'
[Code] .....
View 1 Replies
View Related
Jul 23, 2005
Is there a way in SQL Server 2000 to extract data from a table, such thatthe result is a text file in the format of "Insert Into..." statements, i.e.if the table has 5 rows, the result would be 5 lines of :insert into Table ([field1], [field2], .... VALUES a,b,c)insert into Table ([field1], [field2], .... VALUES d, e, f)insert into Table ([field1], [field2], .... VALUES g, h, i)insert into Table ([field1], [field2], .... VALUES j, k, l)insert into Table ([field1], [field2], .... VALUES m, n, o)Thanks in advance
View 5 Replies
View Related
Dec 5, 2006
With "bcp MyDatabase.dbo.MyTable out C:MyFile.Dat -n -T" command line, I could get an exported data file. And I can also import this file into MyTable using 'BULK INSERT MyDatabase.dbo.MyTable FROM 'C:MyFile.dat' WITH (DATAFILETYPE='native');' query statement.
Now, I want to make my own data file just like made by bcp above. Although I could make file of 'char' type, 'native' type file is needed for performance and other reasons. And the format file should not be used.
Any one help?
View 5 Replies
View Related
May 16, 2005
I have a problem...I have two tables, patient_tran and patient_plan. Patient_tran has case_entry_date and patient_id,patient_plan has patient_id, plan_Id, plan_eff_date and plan_term_date. I need to join these two tables and get the patient_id, plan_id but the plan_id should be the plan_id where the entry_date falls between plan_eff_date and plan_term_date. If doesn't match the criteria then pick up the plan_id where the plan_term_date is null, if there's no null plan_term_date then pick up the plan_id with the most recent plan_term_date. In patient_plan table, there's could be more than one plan per patient. How can I do this? Can anyone please help, will be most appreciated.
Thanks in advance!!
View 6 Replies
View Related
Mar 2, 2004
Hello dbforums,
I are using a BULK INSERT to insert the data from a ascii file to a sql table. The table has a ProductInstanceId column that exists in the tables but does not exist in the ascii DICast data. I am setting the ProductInstanceId to a Guid that will be used for Metrics. I would like to create the Guid in C++ and then set it somehow during the BULK INSERT DICastRaw1hr and DICastRaw6hr. I am calling the BULK INSERT from C++/ADO. I do not see how you can set a static data in the BULK INSERT for a column that exists in the table but does not the source data ... seems there should be a way to do this with the format file?
The other way to do this is with a TRIGGER. I have the TRIGGER below. Prior to the calling the BULK INSERT using ADO I will use ADO to ALTER the TRIGGER with the new Guid. When the BULK INSERT runs the ProductInstanceId will be populated with the new Guid.
ALTER TRIGGER DICastRaw1hrInsertGuid
ON Alphanumericdata.dbo.DICastRaw1hr
FOR INSERT AS UPDATE dbo.DICastRaw1hr SET ProductInstanceId = '4f9a44eb-092b-445b-a224-cc7cdd207092'
WHERE modelrundatetime = (select max(modelrundatetime) from Alphanumericdata.dbo.DICastraw1hr(NOLOCK))
More Questions:
- The Trigger is slow. The Bulk Insert without the Trigger runs in about 10 sec ... with the Trigger in about 40 sec. I tried to use the sql code below in the TRigger but it was only doing the UPDATE on the last row. The TRIGGER must run after the BULK INSERT is complete. Now I am using the select (bad). Any comments ...
ALTER TRIGGER DICastRaw1hrInsertDate
ON Alphanumericdata.dbo.DICastRaw1hr
FOR INSERT
AS
DECLARE @ID as integer
SELECT @ID = i.recordid from inserted i
UPDATE dbo.DICastRaw1hr SET ProductInstanceId = '4f9a44eb-092b-445b-a224-cc7cdd207092'
WHERE recordid = @ID
- I understand that I could set the Guid in the Default Value part of the table definition using the NEWID() function. I need the Guid to be the same for all the rows that are inserted during the BULK INSERT (all have the same modelrundatetime) ... how would I do this?
Thanks,
Chris
View 6 Replies
View Related
Apr 20, 2008
On my site users can register using ASP Membership Create user Wizard control.
I am also using the wizard control to design a simple question and answer form that logged in users have access to.
it has 2 questions including a text box for Q1 and dropdown list for Q2.
I have a table in my database called "Players" which has 3 Columns
UserId Primary Key of type Unique Identifyer
PlayerName Type String
PlayerGenre Type Sting
On completing the wizard and clicking the finish button, I want the data to be inserted into the SQl express Players table.
I am having problems getting this to work and keep getting exceptions.
Be very helpful if somebody could check the code and advise where the problem is??
<asp:Wizard ID="Wizard1" runat="server" BackColor="#F7F6F3"
BorderColor="#CCCCCC" BorderStyle="Solid" BorderWidth="1px"
DisplaySideBar="False" Font-Names="Verdana" Font-Size="0.8em" Height="354px"
onfinishbuttonclick="Wizard1_FinishButtonClick" Width="631px">
<SideBarTemplate>
<asp:DataList ID="SideBarList" runat="server">
<ItemTemplate>
<asp:LinkButton ID="SideBarButton" runat="server" BorderWidth="0px"
Font-Names="Verdana" ForeColor="White"></asp:LinkButton>
</ItemTemplate>
<SelectedItemStyle Font-Bold="True" />
</asp:DataList>
</SideBarTemplate>
<StepStyle BackColor="#669999" BorderWidth="0px" ForeColor="#5D7B9D" />
<NavigationStyle VerticalAlign="Top" />
<WizardSteps>
<asp:WizardStep runat="server">
<table class="style1">
<tr>
<td class="style4">
A<span class="style6">Player Name</span></td>
<td class="style3">
<asp:TextBox ID="PlayerName" runat="server"></asp:TextBox>
</td>
<td>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server"
ControlToValidate="PlayerName" ErrorMessage="RequiredFieldValidator"></asp:RequiredFieldValidator>
</td>
</tr>
<tr>
<td class="style5">
<td class="style3">
<asp:DropDownList ID="PlayerGenre" runat="server" Width="128px">
<asp:ListItem Value="-1">Select Genre</asp:ListItem>
<asp:ListItem>Male</asp:ListItem>
<asp:ListItem>Female</asp:ListItem>
</asp:DropDownList>
</td>
<asp:RequiredFieldValidator ID="RequiredFieldValidator2" runat="server"
ControlToValidate="PlayerGenre" ErrorMessage="RequiredFieldValidator"></asp:RequiredFieldValidator>
</td>
</tr>
</table>
Sql Data Source
<asp:SqlDataSource ID="InsertArtist1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" InsertCommand="INSERT INTO [Playerst] ([UserId], [PlayerName], [PlayerGenre]) VALUES (@UserId, @PlayerName, @PlayerGenre)"
ProviderName="<%$ ConnectionStrings:ConnectionString.ProviderName %>">
<InsertParameters>
<asp:Parameter Name="UserId" Type="Object" />
<asp:Parameter Name="PlayerName" Type="String" />
<asp:Parameter Name="PlayerGenre" Type="String" />
</InsertParameters>
</asp:SqlDataSource>
</asp:WizardStep>
Event Handler
To match the answers to the user I get the UserId and insert this into the database to.protected void Wizard1_FinishButtonClick(object sender, WizardNavigationEventArgs e)
{
SqlDataSource DataSource = (SqlDataSource)Wizard1.FindControl("InsertArtist1");
MembershipUser myUser = Membership.GetUser(this.User.Identity.Name);
Guid UserId = (Guid)myUser.ProviderUserKey;String Gender = ((DropDownList)Wizard1.FindControl("PlayerGenre")).SelectedValue;
DataSource.InsertParameters.Add("UserId", UserId.ToString());DataSource.InsertParameters.Add("PlayerGenre", Gender.ToString());
DataSource.Insert();
}
View 1 Replies
View Related
Oct 12, 2007
Hi,
i have a file which consists data as below,
3
123||
456||
789||
Iam reading file using bulk insert and iam inserting these phone numbers into table having one column as below.
BULK INSERT TABLE_NAME FROM 'FILE_PATH'
WITH (KEEPNULLS,FIRSTROW=2,ROWTERMINATOR = '||')
but i want to insert the data into table having two columns. if iam trying to insert the data into table having two columns its not inserting.
can anyone help me how to do this?
Thanks,
-Badri
View 5 Replies
View Related
Apr 4, 2006
Hi
I am trying to export an table data to csv format. The problem here is the table columns are dynamic. The DTS exports only the columns available during the DTS design time and it ignores if any new columns are added after the design. I need solution for this asap.
Thanks
SqlJerin
View 5 Replies
View Related
Oct 31, 2006
Hello,
I need to convert a SQL table or SQL table data to XML format. I tried using the Import Export Wizard in SQL 2005 (used SQLXMLOLEDB and SQLXMLOLEDB 4.0 as the source). However, it didn't work. Any way you know how I can convert and obtain data in XML format?
Thanks all in advance,
Saurav
View 2 Replies
View Related
May 5, 2014
declare @xml table (xmldata xml)
insert @xml select
N'<parseObject name="Motel">
<fields>
<field name="vehicleno" fieldType="int" fieldSize="">
[Code] ....
I want to extract data in in table format
ParseObjectName FieldType FieldSizeGrammar
Motel VehicleNo Int NULL div.biz-page-subheader li > span.i-phone-biz_details-wrap
mapbox-icon span.biz-partno[/size]
View 2 Replies
View Related
Mar 27, 2007
Hello All,
I uploaded custtable under the database, the data looks fine except that the name that apprears has a lot of distance e.g
it should be :
firstname lastname however the format appears very strange:
firstname lastname
firstname lastname
fistname lastname
Same is the case with the address, I need to adjust or format the apperance that appears on the cell. Is there a way/ sql statement to format the data under the table so that the apprearence looks okay.
I will really appreciate any sort of help on this one.
Thanks,
Rashi
View 1 Replies
View Related
Jun 4, 2015
I have 900000 rows of data in a table and a sample of it is as shown below.Now I need to convert data into the format shown.
View 6 Replies
View Related
May 10, 2015
I would like to know what is the preferred format for form submissions to a SQL table.
View 5 Replies
View Related
Sep 15, 2015
I want to select custom format from table?
View 7 Replies
View Related
Mar 20, 2008
I have several bcp output files I need to import into tables. I do not have format files for them. As far as I know they are in native format. I do not know the layout of the destination table they would populate.
1) how can I determine from the bcp file itself the schema of the destination table? Once I know that I should be able to import the data into the table.
Thanks
View 6 Replies
View Related
Sep 18, 2014
A column of a table has values in the format - 35106;#Grandbouche-Cropp, Amy.
I need to format the column data in such a way that only the text after # (Grandbouche-Cropp, Amy) remain in the column.
The text before ;# (35106) should be inserted in to another column of the same table.
Below is the table structure:
create table [HR_DEV_DM].[CFQ_TEST].sp_CFQ_Commercial_Referrals
(
ID int identity,
PromotionalCode nvarchar(4000),
QuoteNumber nvarchar(100),
CreatedBy nvarchar(100),
Created datetime,
ModifiedBy nvarchar(100),
Modified datetime,
CreatedBy_SalesRepSharePointID int,
ModifiedBy_ModBySharePointID int
)
View 2 Replies
View Related
Apr 28, 2014
I'm sending report based on below DB Mail query from mentioned data format table. But i'm getting invalid format output in csv file.
Table Data:
CREATE TABLE Sales_Data
(
ITEM_CODE varchar(25),
Price float,
Purchased_Date Datetime
[code]...
View 5 Replies
View Related
Aug 4, 2015
how to import data from word document into sql server table in SSIS.
View 18 Replies
View Related
Aug 12, 2014
I want Compare two Table data and insert changed field to the third table ...
View 9 Replies
View Related
May 18, 2006
Hi all,
I have SQL Server Management Studio Express (SSMS Express) and SQL Server 2005 Express (SS Express) installed in my Windows XP Pro PC that is on Microsoft Windows NT 4 LAN System. My Computer Administrator grants me the Administror Privilege to use my PC. I tried to use SQLQuery.sql (see the code below) to create a table "LabResults" and insert 20 data (values) into the table. I got Error Messages 102 and 156 when I did "Parse" or "Execute". This is my first time to apply the data type 'decimal' and the "VALUES" into the table. I do not know what is wrong with the 'decimal' and how to add the "VALUES": (1) Do I put the precision and scale of the decimal wrong? (2) Do I have to use "GO" after each "VALUES"? Please help and advise.
Thanks in advance,
Scott Chang
///////////--SQLQueryCroomLabData.sql--///////////////////////////
USE MyDatabase
GO
CREATE TABLE dbo.LabResults
(SampleID int PRIMARY KEY NOT NULL,
SampleName varchar(25) NOT NULL,
AnalyteName varchar(25) NOT NULL,
Concentration decimal(6.2) NULL)
GO
--Inserting data into a table
INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration)
VALUES (1, 'MW2', 'Acetone', 1.00)
VALUES (2, 'MW2', 'Dichloroethene', 1.00)
VALUES (3, 'MW2', 'Trichloroethene', 20.00)
VALUES (4, 'MW2', 'Chloroform', 1.00)
VALUES (5, 'MW2', 'Methylene Chloride', 1.00)
VALUES (6, 'MW6S', 'Acetone', 1.00)
VALUES (7, 'MW6S', 'Dichloroethene', 1.00)
VALUES (8, 'MW6S', 'Trichloroethene', 1.00)
VALUES (9, 'MW6S', 'Chloroform', 1.00)
VALUES (10, 'MW6S', 'Methylene Chloride', 1.00
VALUES (11, 'MW7', 'Acetone', 1.00)
VALUES (12, 'MW7', 'Dichloroethene', 1.00)
VALUES (13, 'MW7', 'Trichloroethene', 1.00)
VALUES (14, 'MW7', 'Chloroform', 1.00)
VALUES (15, 'MW7', 'Methylene Chloride', 1.00
VALUES (16, 'TripBlank', 'Acetone', 1.00)
VALUES (17, 'TripBlank', 'Dichloroethene', 1.00)
VALUES (18, 'TripBlank', 'Trichloroethene', 1.00)
VALUES (19, 'TripBlank', 'Chloroform', 0.76)
VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51)
GO
//////////Parse///////////
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '6.2'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'VALUES'.
////////////////Execute////////////////////
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '6.2'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'VALUES'.
View 7 Replies
View Related
Feb 9, 2012
I'm trying to insert data into a table from two tables into a single table along with a hard coded value.
insert into TABLE1
(THING,PERSONORGROUP,ACCESSRIGHTS)
VALUES
((select SYSTEM_ID from TABLE2 where
AUTHOR IN (select SYSTEM_ID from TABLE2 where USER_ID
=('USER1'))),(select SYSTEM_ID from TABLE2 where USER_ID
=('USER2')),255)
I get the following-
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
The statement has been terminated.
Do I need to use a cursor?
View 5 Replies
View Related
Jul 20, 2005
Hi thereApplication : Access v2K/SQL 2KJest : Using sproc to append records into SQL tableJest sproc :1.Can have more than 1 record - so using ';' to separate each linefrom each other.2.Example of data'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;3.Problem - gets to lineBEGIN TRAN <---------- skipsrestINSERT INTO timesheet.dbo.table14.Checked permissions for table + sproc - okWhat am I doing wrong ?Any comments most helpful......CREATE PROCEDURE [dbo].[procTimesheetInsert_Testing](@TimesheetDetails varchar(5000) = NULL,@RetCode int = NULL OUTPUT,@RetMsg varchar(100) = NULL OUTPUT,@TimesheetID int = NULL OUTPUT)WITH RECOMPILEASSET NOCOUNT ONDECLARE @SQLBase varchar(8000), @SQLBase1 varchar(8000)DECLARE @SQLComplete varchar(8000) ,@SQLComplete1 varchar(8000)DECLARE @TimesheetCount int, @TimesheetCount1 intDECLARE @TS_LastEdit smalldatetimeDECLARE @Last_Editby smalldatetimeDECLARE @User_Confirm bitDECLARE @User_Confirm_Date smalldatetimeDECLARE @DetailCount intDECLARE @Error int/* Validate input parameters. Assume success. */SELECT @RetCode = 1, @RetMsg = ''IF @TimesheetDetails IS NULLSELECT @RetCode = 0,@RetMsg = @RetMsg +'Timesheet line item(s) required.' + CHAR(13) + CHAR(10)/* Create a temp table parse out each Timesheet detail from inputparameter string,count number of detail records and create SQL statement toinsert detail records into the temp table. */CREATE TABLE #tmpTimesheetDetails(RE_Code varchar(50),PR_Code varchar(50),AC_Code varchar(50),WE_Date smalldatetime,SAT REAL DEFAULT 0,SUN REAL DEFAULT 0,MON REAL DEFAULT 0,TUE REAL DEFAULT 0,WED REAL DEFAULT 0,THU REAL DEFAULT 0,FRI REAL DEFAULT 0,Notes varchar(255),General varchar(50),PO_Number REAL,WWL_Number REAL,CN_Number REAL)SELECT @SQLBase ='INSERT INTO#tmpTimesheetDetails(RE_Code,PR_Code,AC_Code,WE_Da te,SAT,SUN,MON,TUE,WED,THU,FRI,Notes,General,PO_Nu mber,WWL_Number,CN_Number)VALUES ( 'SELECT @TimesheetCount=0WHILE LEN( @TimesheetDetails) > 1BEGINSELECT @SQLComplete = @SQLBase + LEFT( @TimesheetDetails,Charindex(';', @TimesheetDetails) -1) + ')'EXEC(@SQLComplete)SELECT @TimesheetCount = @TimesheetCount + 1SELECT @TimesheetDetails = RIGHT( @TimesheetDetails, Len(@TimesheetDetails)-Charindex(';', @TimesheetDetails))ENDIF (SELECT Count(*) FROM #tmpTimesheetDetails) <> @TimesheetCountSELECT @RetCode = 0, @RetMsg = @RetMsg + 'Timesheet Detailscouldn''t be saved.' + CHAR(13) + CHAR(10)-- If validation failed, exit procIF @RetCode = 0RETURN-- If validation ok, continueSELECT @RetMsg = @RetMsg + 'Timesheet Details ok.' + CHAR(13) +CHAR(10)/* RETURN*/-- Start transaction by inserting into Timesheet tableBEGIN TRANINSERT INTO timesheet.dbo.table1select RE_Code,PR_Code,AC_Code,WE_Date,SAT,SUN,MON,TUE,WE D,THU,FRI,Notes,General,PO_Number,WWL_Number,CN_Nu mberFROM #tmpTimesheetDetails-- Check if insert succeeded. If so, get ID.IF @@ROWCOUNT = 1SELECT @TimesheetID = @@IDENTITYELSESELECT @TimesheetID = 0,@RetCode = 0,@RetMsg = 'Insertion of new Timesheet failed.'-- If order is not inserted, rollback and exitIF @RetCode = 0BEGINROLLBACK TRAN-- RETURNEND--RETURNSELECT @Error =@@errorprint ''print "The value of @error is " + convert (varchar, @error)returnGO
View 2 Replies
View Related
Mar 10, 2008
Is it possible to insert data into a table from a temporary table that is inner join?
Can anyone share an example of a stored procedure that can do this?
Thanks,
xyz789
View 2 Replies
View Related
Apr 25, 2006
Hi,
I am having 2 tables. One is main table and another is history table. Whenever I update the main table, I need to insert the all the main table data to History table, before updating the main table.
Overall it is like storing the history of the table updation.
How do i write a stored procedure for this?
Anybody has done this before?
Pls help me.
View 1 Replies
View Related
Oct 5, 2015
I want to insert the data from temp table to other table. Only condition is, it needs to sorted based on tool number and tool date. For example if we have ten records for tool number 1000, it should be order by tool number and then based on tool_dt. Both tables doesn't have any primary keys. Please find below my code. I removed all the unnecessary columns for simple understanding. INSERT INTO tool_summary (tool_nbr, tool_dt) select tool_nbr, tool_dt from #tool order by tool_nbr, tool_dt...But this query is not working as expected. Data is getting shuffled.
Actual Data
Expected Result
1000
1-Aug
1000
1-Feb
1000
1-Jul
1000
[code]....
View 3 Replies
View Related
Oct 8, 2007
I had a function like below :Public Sub Getdata2(ByVal query, ByVal db, ByVal name)
Dim selectSQL As StringDim con As SqlConnection
Dim cmd As SqlCommand
Dim reader As SqlDataReader
Trycon = New SqlConnection("User ID=xxx;password=xxx;persist security info=True;Initial Catalog=database1;Data Source=xxx.xxx.xxx.xxx.xxx,xxxxx;")
Dim username As String
username = Request.QueryString("username")
selectSQL = "SET DATEFORMAT DMY;Insert into table1(hse_num, st_name, proj_name, unit_num, postal, n_postal, flr_area, flr_sf, flr_rate, flr_ra_sf, land_area, land_sf, land_rate, lnd_ra_sf, prop_code, cont_date, title, sisv_ref, r_date, rec_num, source, username, DGP, Remarks, Sub_Code, caveat, consider, age) select hse_num, st_name, proj_name, unit_num, postal, n_postal, flr_area, flr_sf, flr_rate, flr_ra_sf, land_area, land_sf, land_rate, lnd_ra_sf, prop_code, cont_date, title, sisv_ref, r_date, rec_num, source, '" & username & "', DGP, Remarks, Sub_Code, caveat, consider, age from [yyy.yyy.yyy.yyy,yyyy].database2.dbo.table2 where " & querycmd = New SqlCommand(selectSQL, con)
con.Open()
reader = cmd.ExecuteReader()
lbl.Text = selectSQLCatch ex As Exception
lbl.Text = ex.Message
Finally
If (Not con Is Nothing) Then
con.Close()
con.Dispose()
End If
End Try
End Sub
'-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
May i know that how do i retrieve data from [yyy.yyy.yyy.yyy,yyyy].database2.dbo.table2 due to diffrent server, diffrent UID and Password
View 1 Replies
View Related
Jun 4, 2015
I have a table which stores date-of-birth in varchar 19861231(yyyymmdd). A view takes this data. I want to store this date as mmddyyyy in the view. How can we achieve this?
View 18 Replies
View Related
