Hi Guys,
I want to find out if a ceratin column has values with decimal figures populated? for example say column A has values
10.00
20.00
30.00
50.01
in this case the query should let me know that there is one figure (50.01) with a actual decimal value. So the results of the query should be 1 (since one record has decimal figures <>.00)
Cananyone help
Sonny
I have SQL Server 2012 SSIS. I have Excel source and OLE DB Destination.I have problem with importing CustomerSales column.CustomerSales values like 1000.00,2000.10,3000.30,NotAvailable.So I have decimal values and nvarchar mixed in on Excel column. This is requirement for solution.However SSIS reads only numeric values correctly and nvarchar values are set as Null. Why?
CREATE TABLE [dbo].[Import_CustomerSales](
[CustomerId] [nvarchar](50) NULL,
[CustomeName] [nvarchar](50) NULL,
[CustomerSales] [nvarchar](50) NULL
) ON [PRIMARY]
I have one of the sample values in my table. I need to convert below value to Decimal(18,5)
DECLARE @i
VARCHAR
SET @i
= '0.9'
Output i m looking for is 0.90000
I am creating a table on SQL Server. One of the columns in this new table contains whole integer as wells as decimal values (i.e. 4500 0.9876). I currently have this column defined as Decimal(12,4). This adds 4 digits after the decimal point to the whole integers. Is there a data type that will have the decimal point only for decimal values and no decimal point for the whole integers?
View 2 Replies View Related
I need to create the following table in reporting services
PRODUCT April March Feb
2008 2007 2008 2007 2008 2007
chair 8 9 7 4 4 4
table 3 4 5 6 4 6
My problem is the month names are a column in the dataset, but I dont know how to get it to fill as column headers???
Thanks in advance!!!
Hello,
I am receiving the following error:
Column name or number of supplied values does not match table definition
I am trying to insert values into a temp table, using values from the table I copied the structure from, like this:
SELECT TOP 1 * INTO #tbl_User_Temp FROM tbl_User
TRUNCATE TABLE #tbl_User_Temp
INSERT INTO #tbl_User_Temp EXECUTE UserPersist_GetUserByCriteria @Gender = 'Male', @Culture = 'en-GB'
The SP UserPersist_GetByCriteria does a
"SELECT * FROM tbl_User WHERE gender = @Gender AND culture = @Culture",
so why am I receiving this error when both tables have the same
structure?
The error is being reported as coming from UserPersist_GetByCriteria on the "SELECT * FROM tbl_User" line.
Thanks,
Greg.
Hi people,I?m trying to alter a integer field to a decimal(12,4) field in MSACCESS 2K.Example:table : item_nota_fiscal_forn_setor_publicofield : qtd_mercadoria integer NOT NULLALTER TABLE item_nota_fiscal_forn_setor_publicoALTER COLUMN qtd_mercadoria decimal(12,4) NOT NULLBut, It doesn't work. A sintax error rises.I need to change that field in a Visual Basic aplication, dinamically.How can I do it? How can I create a decimal(12,4) field via script in MSACCESS?Thanks,Euler Almeida--Message posted via http://www.sqlmonster.com
View 1 Replies View RelatedWe have SharePoint list which has, say, two columns. Column A and Column B.
Column A can have three values - red, blue & green.
Column B can have four values - pen, marker, pencil & highlighter.
A typical view of list can be:
Column A - Column B
red - pen
red - pencil
red - highlighter
blue - marker
blue - pencil
green - pen
green - highlighter
red - pen
blue - pencil
blue - highlighter
blue - pencil
We are looking to create a report from SharePoint List using SSRS which has following view:
red blue green
pen 2 0 1
marker 0 1 0
pencil 1 3 0
highlighter 1 1 1
We tried Sum but not able to display in single row.
I have an SSIS package that imports data from an Excel file, replaces any value in Excel that reads "NULL" to "", then writes the data to a couple of databases.
What I have discovered today, is I have two columns of dates, an admit date and discharge date column, and what I need to do is anywhere I have a null value in the discharge date column, I have to replace it with the value in the admit date column.
I have searched around online and tried a few things using the Replace funtion in Derived columns but no dice so far.
Hi,
I have got a table where i want to display sum of count(Column1), count(Column2) in another column.How can this be done?
for example
SELECT SUM(Count(pxInsName)+Count(pxFlowName)) AS "pySummaryCount(1)" , Count(pxInsName) AS "pySummaryCount(2)" , Count(pxFlowName) AS "pySummaryCount(3)" , pxAssignedOrg AS "pxAssignedOrg" , pxAssignedOrgDiv AS "pxAssignedOrgDiv" , pxAssignedOrgUnit AS "pxAssignedOrgUnit" FROM pc_assign_worklist WHERE pxObjClass = ? GROUP BY pxAssignedOrg , pxAssignedOrgDiv , pxAssignedOrgUnit ORDER BY 'pySummaryCount(1)' DESC
But sum function can not be used on aggregate function.
Is there any other way.
I want to add $ symbol to column values and convert the column values to western number system
Column values
Dollar
4255
25454
467834
Expected Output:
$ 4,255
$ 25,454
$ 467,834
My Query:
select ID, MAX(Date) Date, SUM(Cost) Dollars, MAX(Funded) Funding from Application
COST is the int datatype and needs to be changed.
Hi Guys
I have a table that contains codes for commodities.Some of the codes in this table have changed and some of them have not.So now i want to design a solution that enable me to map the new codes in a different mapping table to the old ones in the other table.I also want to retain the old codes because most of the archived data used the old codes.
The New code is the new code to which the Code must be mapped to.Where there is no new code, the current code is being retained.How do i design my table and queries so that i can use the new codes as if i was using the old code.I want to select products with a certain code but using the new code and mapping to the old codes or vice versa.
Please help.
The structure of the data is like this.
New Code
Code
Name
GO01CCN
Gas Oil
XAA
AA
AA
XAL
AL
Aluminium
XMA
ALM
ALM
XAL
ALT
Aluminium in tonnes
XAR
AR
AR
AUD
Australian Dollars
AUJPY
AUJPY
??
CAQ
CAQ
XCC
CC
CC
XCU
CCF
CCF
CER
Carbon Emmission Reduction
Coal
COAL
XCR
CR
Copper Repo
XCT
CT
CT
XCU
CU
CU
XCU
CUC
CUC
Thanks in advance
numbers 2 4 2Above is an example of my table with a single column. My problem is how to add all the numbers in that column to make it 8? The rows are also dynamic. Your help is highly appreciated.
View 4 Replies View RelatedHi, I would appreciate your help on this-
am trying to generate a new column Field2 from an existing column Field1, using a SELECT statement
e.g. if
Field1
3
2
6
1
then the new column is the first-difference in values of the original column:
Field2
<null>
-1
4
-5
is there an easy way to use the select statement, e.g.
SELECT Field1 - Field1~-1 AS Field2 FROM....
Thanks a lot,
Ned
can we define a stored procedure parameter which holds a table's column values?
And can we loop in it in a stored procedure?
If yes, could you give a little sql code sample?
Thanx
I need to write a statement that returns the name, city, and state of each vendor that’s located in a unique city and state. In other words, I can not include vendors that have a city and state in common with another vendor.
Any help?
Thanks.
Hi,
I'm loading millions of rows into a database table. This data contains a lot of dedcimal values of 4 or 6 decimal places somtimes more.
I've found that storing them as floats is inaccurate, and I'm storing as decimals of the appropriate length.
I'm concerned whether this is the right way to do this ?
Can anyone make any suggestions, perhaps an article that I should take a look at ?
Sean
I need to calculate a median on a column in a table. The code I have is:
Code:
Select gender,
CASE
when gender = 'F' then 'Female'
when gender = 'M' then 'Male'
else 'Unknown'
end as test,
datediff(day, [admit_date], getdate()) as 'datediffcal',
from [tbl_record]
How do I calculate the median on the datediffcal column?
It doesn't matter if the resultset only shows the median result. So if the output shows:
median
15
that's fine. Minimally, I need the median value.
Hi, I have a question regarding how to insert one column values into a table by selecting from different table..Here is the syntax..
------------
insert into propertytable values (select lastvalue+incrementby from agilesequences where name='SEQPROPERTYTABLE', 13926, 0, 4, 1, 451, 1, 8, 1)
the first column in the propertytable will be... select lastvalue+incrementby from agilesequences where name='SEQPROPERTYTABLE'
How do I do that..Help PLZ..
How to resolve the below task
create table #temp ( idx int identity(1,1), col1 int, col2 int )
Here i want a flag success or fail on basis of below conditions.
I need to take all the col1 values and then i need to compare to each other.
if any difference found, i need to check difference more than 30, then it should raise the flag as "Failure".
if all the col1 values are ok , then we need to check Col2 values same as above.
--case 1
insert into #temp(col1,col2)
select 16522,18522
union all
select 16522,18522
union all
select 16582,18522
--select * from #temp
--truncate table #temp
Because of difference in col1 values . the value of flag should be fail.
--case 2
insert into #temp(col1,col2)
select 16522,18522
union all
select 16522,18522
union all
select 16522,17522
Here also the col1 is ok but col2 values have difference so it should be Fail.
Otherwise it should be success.
HI ALL,
CAN ANYBODY HELP ME TO SOLVE THE ISSUE
I WANNA UPDATE A RECORD OF ONE TABLE WITH VALUES THAT ARE PRESENT IN A COLUMN OF ANOTHER TABLE
OR
CAN I DO THE SAME USING INSERT QUERY
THANKS IN ADVANCE
Arif writes "I want to insert values in to a table which is having identity column, how? can you help me out from this problem.
Thanks in advance
Jamal"
Hi,
I want a column in a database table to store comma separated values.
So can I store it as a string type(varchar,nchar) using commas?
What are the other alternatives provided in Sql Server 2005
--Subba Rao
Hi,
I am mapping an entity from SQL 2005 to another entity in another system on SQL 2000. Since the destination system has its own ID generator, I want to keep the generated ID for each row of my table in a column of my table in SQL 2005. The new column is in the dataset now , but I don't know how to update my table to have that column values (The OleDbDestination just insert new items.)
Samy
How do I update the OrderGUID column in Table B with Values from OrderGUID column in Table A. I have already populated the OrderGUID column in Table A using NEWSEQUENTIALID(). Now I need to populate the OrderGUID column in Table B with Matching GUID values from the OrderGUID Column in Table A.
Does any one have a script to accomplish this task. thanks
The values that are being fetched from the database are not being read as is , when there are decimal values with 10 or more digits after the point, the values are truncated (approximated) to 8 digits
The approximation is not consistent in all the cases
Some times depending on the numbers for example 0.434000001 is truncated to 0.434.
This is happening when i read the values from the sql database using the SqlDataReader.GetValue method into an ArrayList in C# .NET
Hi All,
I have a table Saleshistory with 89481412 records. I have a field Sales of nvarchar type, all the records in this field are numeric, and the records are with 2 decimal places. I expect all the records to be ending at .00 (for example 5.00,345.00,25.00), but I want to verify if something is for example 5.6 etc.
So in short I want to check if any Salesrecords have more than zero values in the decimal. How can I check this.
Please help.
Thanks,
Zee
Hi
I have an SQL search that is converting two values to type money. I want it to show two digits after the decimal point but am getting inconsistent results. The first value is as follows:
tblInventoryItem.itemcost as originalcost (the column is datatype money)
This displays correctly i.e. 2000.00 or 150.70 etc
The second value is this:
tblInventoryItem.itemcost + tblUpgrades.ItemCost as totalcostincupgr (both columns are datatype money)
But this displays as 2000 or 150.7
How can I get the second value to show two decimal places even when the digits are zeros?
Thanks!
Hi. I I'm importing a text file with lot's of decimal values with this format xx.xx. The problem is that my locale is Portugal and the points are being striped off and are not being considered as decimal separators (for example I have values like 0.04 and in the sql server database i see 4). I have tried to change the locale but i receive a message saying that the locale is not installed in my system.
Any help on this ? tnks in advance
I have a table 'wRelated' with the following columns
[related_id] [int]
[channel_id] [int]
[mui] [varchar]
[price_group_id]
[type_id] [int]
[related_mui] [varchar] (100)
[date_started] [smalldatetime]
[date_ended] [smalldatetime]
[date_entered] [datetime]
[deleted] [tinyint],
[rank] [int]
data in column [mui] is repeated as the table has more than one entries for the same [mui],
The requirement is to select the distinct[mui] but value in all the other columns for the same mui should be select in the next row with null for the same [mui]
The recordset expected should be something like this.
[mui],[related_mui],[price_group_id],[date_entered],[date_ended] m123,rm345,'pr','12-10-2003',12-12-2004'
null,rm789,'ar','12-1-2003',26-2-2004'
null,rm999,'xy','14-12-2002',12-2-2004'
m777,rm889,'pr','12-12-2004',12-12-2004'
null,rm785,'yy','1-10-2002',12-12-2004'
m888,rm345,'pr','2-8-2003',12-12-2004'
null,rm345,'tt','30-7-2002',12-12-2004'
I have tried Unions and temporary table inserts.
I have a table with a column AttributeNumber and a column AttributeValue. The data is like this:
OrderNo. AttributeNumber AttributeValue
1.-Order_1 2001 A
2.-Order_1 2002 B
3.-Order_1 2003 C
4.-Order_2 2001 A
5.-Order_2 2002 B
6.-Order_2 2003 C
So the logic is as follows:
I need to display in my query the values are coming from Order_1, means AttributreValues coming from AttibuteNumbers: 2001,2002,2003...and Order_2 the same thing.
Not sure how to create my Select here since the values are in the same table
Hello,i have a table and if a record is inserted i will test a numeric valuein this table. If the this value is greather as 1 million, than anstatus column should be changed from 'A' to 'B'.Yes and sorry, this is a newbie question.On Oracle this work simple:create trigger myTrigger on tableXasbeginif :old.x 100000 then:new.y:='B'end if;end;ThanksMaik
View 2 Replies View RelatedHi, all,
I have a question about adding a unique key column to an existing table.
what i trying to do is that: I have already created a table, now i wanna add a ID column to this table, and generate the values for ID column from 1 to the existing row number. How can I get this done?
Thanks a lot in advance for any guidance.