I am setting up a web application, where the application needs to access a
database. I have created the user (for the application) and it can log in to
the SQL 2005 Sp2 server, but when I try to open the required database using
Server Management Studio, it says "The database [name] is not accessible.
(ObjectExplorer)"
How do I make a database accessible to a login, using Server Management
Studio?
hi
how can i make a user give it a name ReportUser and a password msdn for a certain database named on the sql server 2000 and thank you for your help and oyur time
This is my first time to deploy an asp.net2 web site. Everything is working fine on my local computer but when i published the web site on a remote computer i get the error "Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a local user profile on the computer. The connection will be closed" (only in pages that try to access the database)
Help pleaseee
Hi,
i use sql server express 2005. There are several databases which all works fine.
My problem is: when i try to expand one database in Management Studio express, i get for that database (not for others):
"the database 'mydb' is not accessible (microsoft.sqlserver.objectexplorer)" and that's it. I can't see tables nor any objects of that db, while the application still can insert records into tables of that db.
When i run this query: select * from master..sysdatabases
i see all the databases (also 'mydb') with the same mode, status ...
Thanks
Tartuffe
Last week we reset the Model datable to autogrow. Now I get an error when I try to go into it. (I discovered this since I can no longer go into the interface of the program). I wasn't here when the changes were made to the Database Model, but the change was made because the transaction log was filled up.
Help.. I'm such a newbie.
anke
Hi everybody,
There are times when the database (SQL 7.0) cannot be accessed ( backup, routine maintenance, etc....) from asp page.
In those cases i am getting an ugly asp error message.
Is there a way ( code ) which will trap that error and return a nicer custom message for user or something like that.
Thanks a lot,
Hi,
I've a very basic doubt about database mirroring. I did setup a database mirroring session with the help of SQL Server Management Studio between the server A (db1) and B(db1). When is stop database mirroring by using the command button "Stop Mirroring" available in the mirroring page of SQL Server Management Studio , the mirror database{ B(db1) } goes to state "Restoring...". After stopping the mirroring i'm not able to access the mirror database.
Can you please tell me how to bring mirror database B(db1) to operation mode so that we can start working with that database?
Regards,
Gopi
I was using windows authentication and later changed to SQL server authentication so that i can connect to java netbeans.i went to the security and login under the object explorer to set a username and password for the sql server authentication.it successfully login but cant open any of the my database created earlier.it gives database not accessible error.
View 2 Replies View RelatedHi,
How do we make a normal Windows NT user as DBO in Sql server 2000?
Thanx
when we display hierarchies, we'd like the user to have the option of expanding a column for wider viewing, perhaps by dragging a border. Is this possible?
View 3 Replies View Related
Hi all,
I'm kinda stuck with the following issue and would apreciate some help with it.
Basically i need to have a user within SQL that has rights to restore databases and is the owner of that database so it can alter the data. The problem i face is that at this moment i see no other way then making that user either member of the server role "sysadmin" or "serveradmin".
Anyway, these roles have to much rights. I tried using the dbcreator role which will make a the needed user db_owner but only when a new database is created, not when a database is restored.
Tried to resolve this with a DDL trigger and then temporarily run as a user with serveradmin rights, however there is no system event for restore database, so that doesn't work either.
Anybody got any suggestions?
Hi,
Please give the T-SQL script for this ? Thanks
Shanth
I actually work in an organisation and we have to find a solution about the data consistancy in the database. our partners use to send details to the organisation and inserted directly in the database, so we want to create a new database as a buffer database to insert informations from the partners then make an update to the main database. is there a better solution instead of that?
View 6 Replies View RelatedWe some how is not able to entre to sql executive with the sa name and password and so not able to see the context of the database. we are not able to access the databeses either. We want a solution whereby I can change the SA login or give him the administrator right to do everything with the database.
Anindya Mukherjee
I changed the Administrator Password on our Server. I also changed the sa password for the SQL Server to match. Ever since then, if one of my web pages attempts to retrieve data, the user get the error:
SQL Server does not exist or access denied.
This is strange because my pages do not use the sa account in order to retrieve data. I have a copy of MS Access installed locally on the server. Using it I can access the SQL Server data with linked tables. So the SQL Server is obviously servicing internal requests.
I tried changing the passwords back again, but the problem still persists.
Anybody any ideas?
Hi.
I am almost wrapping up a project of my own and I will have the option to restore the database, so dropping the existing one and then running the SQL script to create the database, tables, stored procedures and so on.
My question is, (using .NET 2.0 C#) - what is the best way to resolve the "cannot drop database as it is currently in use" message, or some message of the similar sort?
Even though I specified "USE MASTER" in the commandText string, there will be somewhere, in a situation, where the database will still be in use.
How can I forcefully make it NOT in use, drop it and do other things I like to?
What is the best way?
Many thanks!
Hi,
trying to input
create table T (c1 nvarchar(max));
in MS SQL Server Manangement Studio Express results in an error :
Fehler beim Analysieren der Abfrage. [ Token line number = 1,Token line offset = 30,Token in error = max ]
create table T (c1 nvarchar(4000));
is processed w/o errors.
I´ve installed SQL Server 2005 Express Ed. SP2
Microsoft SQL Server Management Studio Express 9.00.3042.00
Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158)
Microsoft MSXML 2.6 3.0 4.0 5.0 6.0
Microsoft .NET Framework 2.0.50727.42
Betriebssystem 5.1.2600
Any ideas?
Thanks in advance
Werner
I am trying to expose a stored procedure on SQL Server 2005 as a web service. So I just have an end point created with the procedure as my web method. Now when I try to reference this web service in my C# windows application, I am only able to see the procedure definition by requesting for the WSDL http://servername/path?wsdl. But when I try to reference it, I get the error 501/505 - Not Implemented or not supported. Any ideas what the issue here could be? Would really appreciate the help here as I am kinda stuck! - Thanks, Manmeet
View 2 Replies View RelatedHi all,
We installed RS on a non default website on our IIS server. When targeting the Reports page from the server itself (http://site:8015/Reports) we can see the welcome page. However if we try to access that same page from another machine we get a generic IE message: IE cannot open the specified page check your internet connection etc. Because the error is so generic I have no idea as to what can be the cause: IIS or RS config ? I suspect IIS because no RS error is raised but then I don't see what I could've missed on that level...
Any ideas of what could be the cause of this ?
thanks a lot
Notes:
- the DB and the RS instance are on the same server
- other sites hosted on the same server are accessible from the client machine
- Anonymous access is enabled on the site level, and on the Reports / ReportServer level. I tried unsetting it but it didn't change anything for the remote client.
- I tried changing the account RS is running under: it used to be LocalSystem, I now set it to NT AuthorityNetworkService but no difference.
Environment: SQL Express Advanced & Windows Server 2003
Hi:
I have installed sql server 2005 express and SQL Server Management Studio Express
How can I generate a database from another copying the structure and data?
For example I have a database named Customers, I need to make a copy of Customers named Customers2. Customers2 also will be attached to the same Database Engine Server where Customers is attached.
How I Can do it?
Thanks!
P.S.
I tryied to make a copy of mdf an ldf files from Windows Explorer and renamed these files but I could not attach to the same Database Engine Server because I got an error.
Hi,
at work all the databases i use are only accessible via the local network, i am wanting to take a copy of the databases and save them as a database file so i can burn them onto cd and take home with me so i can get some extra work done on the weekend (i'd also like to start doing this so i have backed up copies of the database incase anything happens to it)
i was wondering how i can do this? are there any tutorials on the web that someone can point me to? i have SQL Server 2005 Management Studio Express.
TIA
Hi!
Do you now if it is possible to make database unavailable for users after business hours and how.
Thank you in advance,
Elena.
No, I don't need a step-by-step (necessarily). I've been looking at W3Schools tutorial and it says to:
Code:
CREATE TABLE Person
(
LastName varchar,
FirstName varchar,
Address varchar,
Age int
)
But what is that? A text file saved with a .sql extension. Something typed at a command prompt? Is there an SQL interface?
--William
I work as a computer repair tech for my company and have been offered the opportunity to do a project. I'm looking to make a database of about 2000 peoples fingerprints (2 copies of each finger). We have Microsoft SQL Server but I have no Idea where to start. The vision is, to have an RFID scanner and have everyone swipe their badge then scan their prints and it automatically associates their prints with the badge number. Is there an easier or more simple way to do this or do you have any pointers on where to start? any help will be greatly appreciated. Thanks.:angel:
View 6 Replies View RelatedI am making a project where I have to add city, agentname, rankofagent, referenceagent name the problem is that who can I make a table where suppose I add member a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p like that
b is joined by a
c is joined by b
d by c, e by d and so on,
What I want here is that how can I get the result suppose i want to see that chain of p. I want result to be printed as a,b,c,d,e,f,g,h,i,j,k,l,m,n,o either result should be in horizontal form or vertical. with or without comma. I am doing this in SQL....
There is a need to make a backup of a database to URL. how to do this.
View 2 Replies View RelatedHello faculties,We've a production database that is being used by one of our clientsas a backend for his website. The database size is around 1GB.Recently we added some tables to our local database which is areplica of the production database. Now we need to apply the samechanges at the production one aslo.I've no clue about what steps should i implement.Please guide me!Thanks in advanceDebian*** Sent via Developersdex http://www.developersdex.com ***
View 3 Replies View RelatedHi
I need to make a copy of a sql server database for test purposes but the database is live
how would i make a copy of it without it being affected?
thanks
Hi there,
I want to create database login and set that login to owner of the database? Can anyone help me?
thanks
Cannot open user default database. Login failed.Login failed for user
'NT AUTHORITYNETWORK SERVICE'. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: Cannot open user default database. Login
failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'. I have This Error When i try to log into My online web site, i have no idea how to fix it,one day it was working and the next it wasnt, is there any way to find out what database the default is and if it's either incorrect or not present change the web.config in a way that will make my system work. i have the NT Authority/Network Service in my Server Properties Permissions, its given the type login and is granted Connect SQL by sa i have 3 colder copies of the web site on my server my question is, how would i use of of these to restore the original site configuration is there a way to restore the original configuration to undo whatever it is i've done to break the system ChrisStressed
Hi, I'm new to SQL Express 2005.
I found information regarding : "Cannot open user default database. Login failed."on this forum but I think that in my case it's a bit different issue.
I have a website (ASP.NET 2.0) accessing DB, in the mean time Windows Service tries to update some data in the same DB (Service runs as NT AUTHORITYLOCAL SYSTEM). The second connection is rejected: "Cannot open user default database. Login failed.Login failed for user ....".
Problem occurs only when both: service and website are running at the same time. So service and website are running without problems when they are connecting DB exclusively.
My connection string is:
"Data Source=.SQLEXPRESS;AttachDbFilename="|DataDirectory|spider-lab.mdf";Integrated Security=True;User Instance=True"
I would be grateful if you can help me
Hi All,
We have two Baan erp servers 1) SQL2005 on windows 2003 server 2) SQL2000 on windows 200 server.
SQL 2005 server has two database instances, one being the default and the other one as a named instance.
We have been trying to access the data in these two database instances from the second server for our baan erp application on it. Now, we are able to see the data for default instance, but if we try to fetch the data from named instance we end up getting dberror 17.
We tried to register the named instance on the second server using "new sql server registration wizard" in sql 2000 enterprise manager, but there also the list only shows the default instance from sql 2005 server. I tried to type in the named instance and register (both windows and sql server authentication), but end up getting error "Database instance doesn't exist or access denied".
So, for some reason, the named instance from sql 2005 server is not getting published on the network. Please suggest some ways to get around this issue.
thanks,
Jatin
Re SQL Server 2005 ExpressWhen I attempt to copy the master file for backing up, it is being used byanother application, even after shutting down the PC completely and poweringit up again. What can I do to make back-ups?Zach
View 2 Replies View Related