How To Pass Parameters In Url For A Report Published In Reportserver (report Built On Stocked Procedure) ?
Apr 30, 2007
Hi,
I have created a report with the report server project template.
the report is created from stoked procedure having defaut input parameters.
With visual studio, i publish my report on reportserver. whenever i access to my report on this url :
http://localhost/ReportServer/Pages/ReportViewer.aspx?%2fReport+Project4%2fReport4&rs:Command=Render. the created report is with the default parameters.
I would like to know if i can transmet parameters for the stocked procedure to build the report with the request i want.
I tried to put parameter directly in the url in this way
I am having hard time in sending parameters to the report server through reportviewer control from my application. Could anybody help me on this issue?. Is there any way to send the parameters and also what kind of configuration do i need on my report project so that it can accept parameters from my application.
I have a really cool Budget report which has two matrices on it. One is used/visible if the user selects four levels of grouping, and one is used if the user selects only three levels of grouping. The four choices for grouping are four fields, Par, FERC, Point, and Resource.
Since grouping is optional, I need a way to pass the parameter for a field that is not grouped on from the main report to the drillthrough report. For example if the user chooses to group on all fields but Point, I need to pass the report parameter that was used by the main report for Point to the drillthrough report as a report parameter.
So, I tried testing the three grouping levels values and if none were equal to "Point" then pass in the parameter by putting the following expression in the Parameter Value box for the Point parameter on the Navigation tab of the datacell of the main report that is the drillthrough link:
=iif( Parameters!GroupLevel1.Value <> "Point" and Parameters!GroupLevel2.Value<>"Point" and Parameters!GroupLevel3.Value<>"Point" , Join(Parameters!PNTPoint.Value,",") , Fields!Point.UniqueName )
But this is not working; the drillthrough report shows a blank dropdown for the Point parameter and I have to manually set it. Does anyone see an error in the syntax of the iif statement?
Any references, links, resources or good clean jokes would be greatly appreciated.
Can someone please explain how i would define a multi-valued default parameter within the report Properties -> Parameters. I have an OLAP based report with multi-value parameters. I do not want to set the default values from within BIDS. Instead, I'd like to do this from the ReportServer (after report deployment). I have no problem when i enter a single value as a 'default value', for example: ReportParm1 String [Deal Dim].[Shelf].&[AAM] But, how would i define it with multiple values as a 'default value' ?, for example: ReportParm1 String [Deal Dim].[Shelf].&[ABC] , [Deal Dim].[Shelf].&[DEF] NOTE: It appears that you cannot use expressions, such as the 'split' function in the 'default value' space. Any help would be greatly appreciated. thank you.
Can someone please tell me how to retrieve/query the list of fields from an entity of a report data model that has been published on the reporting server programmatically ?
I am trying to upload a report data model to the reporting server and planning to use that model as the data source and consume it through our existing web application?
I am Creating Click Once Windows Application with Reporting Services 2005.I have created Report and Published on Report Server.In my windows application I am successfully able to view my published report through report viewer control.
Now in my application I am getting a dataset from my custom webservice. I want this dataset data to be added to my report as datasource at runtime on Client Side ,as my report is on Report Server.
In a matrix report with column and row groupings, how to pass the parameters to the drill-through report? The column grouping could open up into multiple columns and the same to the row groupings. I have a navigation link to a drill-through report on a total field in the matrix report and the drill-through report is required three parameters, one from the parameter from the matrix report (this one I can map to easily), second parameter is one of the value from the column grouping field and the third parameter is one of the value from the row grouping field. How to select those values from the column/row grouping.
I have a project where I need to automatically pass 2 sets of parameters to a SSRS report and generate PDF files. I have set the defaults for the parameters based on one set of parameters and created a subscription to automatically generate PDF copy. However, I am not sure how to generate the report automatically using the other set of parameters. Also, I don't want to create two report files to accomplish this.
In the data tab of my report (Reporting Services for SQL Server 2000), I'd like to run a query that requires parameters be passed to it. Is there a way to pass the parameters of the report to that query?
I'm am on the report server as administrator. How can I cleanly delete a report? How can I see what folders and reports I have under the reportserver?
I'm looking under sql management studio and see the reportserver db, now what? I open up the IIS virtual for reportserver, now what? Nothing seems to point to a folder where I know I am able to deploy to and run reports from.
Hi, I have created an report by selecting stored procedure as dataset data source. Now when I run the report, it is asking for the parameter values for my stored procedure, but I want to pass the values from another .aspx page. Could any one please let me how do I pass values to the stored procedure parameters in the report. I tried doing the Local method of reports, but the printer icon is not appearing in that, if I use Reportviewer control of my own. When I use the Remote method of reports, I am facing this problem. Please could any one help me in this.
Don't know if this is possible or not - Need to produce a report and the main report has a grid in it.
For every row in the main report, in one of the grid fields there are n images. So to do this, I am using a sub-report. But there is a problem with going to the database for every row to fetch images that if the user does a report spanning more than about 6 months, there will be thousands of records each with the potential to have many images and the constant round trips to the db server would probably kill it.
So what I want to achieve is to fetch the dataset in the main report with just one trip to the database and then pass the dataset filtered by a uniqueidentifier to each row of the subreport.
Could someone please let me know if this or something like it is possible and how to go about it?
I have been working on parameterised reports for quite a while and have a problem with a report that I cannot fathom despite days spent fiddling. I am hoping someone will be able to spot a silly mistake...
Basically, I am developing my report in VS2005 and it works perfectly. When I publish it to the reporting server I get an error: The 'pSite' parameter is missing a value.
I cannot understand why the report should fail when published.
Before anyone says it, yes I have deleted the published report and re-deployed so there should be no chance of any 'old' deployments messing things up!
Any obvious suggestions before I start posting code?!
I have a data table called STOCKPE which holds stock valuation information at the close of business each day. I wish to use reporting services to extract the data in this table on a daily basis and keep a daily history on the report server. I know I can do this - this isn't my problem.
When I have the history of this table on the report server, can the data that the reports on the report server hold be used as a datasource for another report?
I'm no expert in reporting services, so if this is possible, or if there's a better way of doing it, please use small words and short sentences. No offence intended to all the very well educated SQLRS wizards out there, it's just that I'm not one of them and your answer will be lost on me if you use a lot of abreviations and acronyms.
Code Block CREATE PROCEDURE udsp_td_queryowner @state varchar(10) = NULL, @businesstype varchar(20) = NULL, @size int = NULL, @sortorder varchar(20) = 'state' AS SELECT gl_t.state AS [State], gl_t.business_type AS [Business Type], gl_t.lowsize AS [Low Size], gl_t.highsize AS [High Size], e.InternetAddress AS [Owner] FROM gl_territory gl_t JOIN employee e ON gl_t.employeenumber = e.EmployeeNumber WHERE state = COALESCE(@state, state) AND business_type = COALESCE(@businesstype, business_type) AND COALESCE(@size, lowsize, highsize) between lowsize AND highsize ORDER BY CASE WHEN @sortorder = 'state' THEN gl_t.state WHEN @sortorder = 'business type' THEN gl_t.business_type WHEN @sortorder = 'owner' THEN RTRIM(e.FirstName) + ' ' + RTRIM(e.LastName) END ASC, CASE WHEN @sortorder = 'low size' THEN gl_t.lowsize WHEN @sortorder = 'high size' THEN gl_t.highsize END ASC, CASE WHEN @sortorder = 'statedesc' THEN gl_t.state WHEN @sortorder = 'business typedesc' THEN gl_t.business_type WHEN @sortorder = 'ownerdesc' THEN RTRIM(e.FirstName) + ' ' + RTRIM(e.LastName) END DESC, CASE WHEN @sortorder = 'low sizedesc' THEN gl_t.lowsize WHEN @sortorder = 'high sizedesc' THEN gl_t.highsize END DESC
What it allows me to do is enter in any number of the variables when running the stored procedure. For example, EXECUTE udsp_td_queryowner @state = 'IA' would give me everything in the table in the state of IA regardless of the other field values. Likewise, if I ran EXECUTE udsp_td_queryowner @state = 'KY', @size = 15 it would return the records that are in KY and the size of 15 is in the range of the low and high value.
If I run the first example in Query Analyzer I get 53 records from the data I have. It returns every record that has IA as the state. I run the same thing in Reporting Services and all I get is 3 records. Just the 3 records for the state of IA where the business type is either null or blank (I can't tell.) If I allow all of the variables to accept Nulls then it returns the correct data. However, I would like to find a better alternative because when the report is run it returns all of the records in the table initially and if they user wants to enter in any parameters they have to toggle off the null box for the corresponding paramter.
The report simply just report a tables content and i can preview it by Ctrl+F5 without problem.
However, after I publish the website to localhost,which is Http://localhost/ViewReport/. I failed to open the report in http://localhost/viewreport/default.aspx The page is opened but there is a error message at the reportviewer portion.
" ASPNET user don't have permission to view the report.." something like that.
Anyone know what causes the problem?
I am thinking is it because I am using build in account "Local system" to run the Sql express 2005 Databaes and reporting service? But I have no choice, when I install the SQl express 2005, the only build in account I have is "Local System", but "Local Service " and" Network Service" is missing from my system. It is weird. Is it because of windows server 2000?
I would like to know if there is a way to maintain the history of changes to the reports that have been published to the report server?
I know that the report definitions get saved onto ReportServer database. But let's say a user makes a change to the published report and then saves it back to the server. And that the latest change was incorrect and I have to revert back to the previous version of the published report. Is there a way to do that? Does the report server maintain a history of previous versions.
There is a history for each report and I think that corresponds to the history of report executions (output data). But I am talking about the history of actual report definition.
We have an Office SharePoint 2007 site, we developed a couple of web parts and added them to our site. We used SQL Server Reporting services 2005 as our reporting solution. The reports are hosted on the report center and when we need a report, we open it by sending a URL requesting the report, passing the report parameters in the URL query string. So the report is filtered based on the parameters passed from the web parts.
But since best practices say that you should host reports directly under SharePoint, by configuring the reporting services to run in the SharePoint integrated mode. We followed the steps and installed SharePointRS and we finally succeeded to publish the reports to a SharePoint folder, but we had a limitation: we are unable to pass the report parameters internally to the report hosted in SharePoint. If we passed them in the query string as the report center case, SharePoint neglects them totally. So the question is: how can I pass parameters internally between a SharePoint web part and a SQL server 2005 reporting services report hosted in SharePoint?
I am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
Is there a way to subscribe SSRS report using dynamic parameters for email and trigger the report from autosys job so that report should generate the exact time the job is triggered.Let me describe, my SSRS report should be triggered on success of one autosys job. i need to send email parameter and time of report schedule from this autosys job.
BACKGROUND: When SQL Server 2005 w/ SSRS2005 was installed, a database named "ReportServer" was created by the system. I use the tables in this database to generate audit/statistical reports primarily hitting the dbo.ExecutionLog & dbo.Subscriptions tables for analyzing server activity.
QUESTION: Can I modify the tables in the system built "ReportServer" database? Or, will RS stop working? Also, if i modify the tables will it prevent an update?
DETAILS: As for the Subscriptions table, I want to add the Field "LastRunTime" as a PK so all the history will be storeded. Curently, this table only stores the last subscription that was sent and gets over written when a that subscription is sent out again. Or, is there another way to store all history?
As for the ExecutionLog table, it only stores data for 60 days. I want to store all history. Is this possible?
All comments & suggestions are welcome & I look forward to all your respoonces!
Is it possible to poplulate some control like Dropdownlist (for example, with Product names Or Product Ids) from database table in SSRS project type and then filter report by choosing various choice pre-populated in dropdownlist control.
Project Type is : SQL Server Reportings 2005.
Desired Action: Report will run in browser, User will choose specific product and Run the report(filter) to show that product relate results.
Hi, I am trying to filter data within my report by a date range (FromDate - ToDate), which is using a cube as a datasource.
My Issue: I have the filtering working ok but if i select a date which is outside the range of the data within my cube for example if i select the starting date for the range as 1/Jan/1965 but by data starts from 15/Jan/1965 then no data is returned.
Within the MDX query within the STRTOSET function i am using 'constrained' which is around the date parameter i.e. StartDate for Range.
My question is has anyone or is it possible to use date values outside of the range of the data within my cube and get a correct dataset returned. If so could you please explain how with an example.
I have a stored procedure that takes a date range and returns all the sales in that date range. I'm trying to create the report model for ad-hoc reporting. When I go to create the dataset view, it only lets me select tables or views.... how do I get around this?
Is it possible to add custom controls in for parameters in report manager??
I have a parameter that requires the user to click a button and select a bunch of things in another form. How can i do this in reporting services??
I also would like to change the layout of the parameters toolbar, ie. make text boxes smaller widths, show/hide parameters based on other parameter values.
I know i could write my own web page that does this and hide the parameters toolbar when they run the report, but this would mean that we lose other functionality that report manager has, eg. scheduling.
Does anyone know if customising the report manager will become available in a later version??
I have developed a report in SSRS. When I preview it, the report looks fine. However when I view the same report on the ReportServer of a remote machine it looks differnt. Some additional rows with some values appear and I have no idea from where they are coming.
This same report works fine on my local PC and ReportServer. However this problem only appears when I deploy it on a remote machine and view it on the web there.
Based on jax-ws 2.0 technology, I built a java client application to access a report via the web service interface of the SQL Server Reporting Services 2005.
I used the jax-ws "wsimport" tool to generate the java classes needed to call the web services (The class generation is based on the wsdl and I used this one http://serverName/reportserver/reportexecution2005.asmx?wsdl) and wrote the following sample code :
ReportExecutionService service = new ReportExecutionService(); ReportExecutionServiceSoap rs = service.getReportExecutionServiceSoap();
String reportPath = "HelloWorld";
String format = "MHTML"; String devInfo = "<DeviceInfo><Toolbar>False</Toolbar></DeviceInfo>"; Holder<byte[]> result = new Holder<byte[]>(); Holder<String> extension = new Holder<String>(); Holder<String> mimeType = new Holder<String>(); Holder<String> encoding = new Holder<String>(); Holder<ArrayOfWarning> warnings = new Holder<ArrayOfWarning>(); Holder<ArrayOfString> streamIDs = new Holder<ArrayOfString>();
The trouble is that an exception is caught on the call to the render method
javax.xml.ws.soap.SOAPFaultException: The session identifier is missing. A session identifier is required for this operation. ---> The session identifier is missing. A session identifier is required for this operation. I found on the web (in C# examples) that this SessionId is supposed to be contained in the ExecutionId attribute of an
ExecutionHeader object. The ReportExecutionServiceSoap class (my rs object in the example) does not offer any way to directly set this SessionId or to associate an ExceptionHeader before calling the render method.
Cannot create a connection to data source 'f_MsOracleEmLims'.
ORA-12154: TNS:could not resolve service name
Hello, Two members have solved my deploying report to localhost problem. The report now is on localhost, but when I clicked a report to view, the above error message came out.
The Oracle 10g database is on company network database server. I created a dataset that links to the data source 'f_MsOracleEmLims'. This data source works OK in report design but just does not work out in localhost.
Please take me out from this hell. I created report using VS2005 Business Intelligence Project. It builds fine. I can also see data in the design time. But when I am trying to deploy it gives me this error.
TITLE: Microsoft Report Designer ------------------------------
A connection could not be made to the report server http://localhost/ReportServer.
<b> Description: </b>An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. <br><br>
<b> Parser Error Message: </b>An error occurred loading a configuration file: Failed to start monitoring changes to 'c:inetpubwwwroot' because access is denied.<br><br>
<b>Version Information:</b> Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
</font>
</body> </html> <!-- [HttpException]: Failed to start monitoring changes to 'c:inetpubwwwroot' because access is denied. at System.Web.FileChangesMonitor.FindDirectoryMonitor(String dir, Boolean addIfNotFound, Boolean throwOnError) at System.Web.FileChangesMonitor.StartMonitoringFile(String alias, FileChangeEventHandler callback) at System.Web.Configuration.WebConfigurationHost.StartMonitoringStreamForChanges(String streamName, StreamChangeCallback callback) at System.Configuration.BaseConfigurationRecord.MonitorStream(String configKey, String configSource, String streamname) at System.Configuration.BaseConfigurationRecord.InitConfigFromFile() [ConfigurationErrorsException]: An error occurred loading a configuration file: Failed to start monitoring changes to 'c:inetpubwwwroot' because access is denied. (c:inetpubwwwrootweb.config) at System.Configuration.ConfigurationSchemaErrors.ThrowIfErrors(Boolean ignoreLocal) at System.Configuration.BaseConfigurationRecord.ThrowIfParseErrors(ConfigurationSchemaErrors schemaErrors) at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject) at System.Configuration.BaseConfigurationRecord.GetSection(String configKey, Boolean getLkg, Boolean checkPermission) at System.Configuration.BaseConfigurationRecord.GetSection(String configKey) at System.Web.Configuration.RuntimeConfig.GetSectionObject(String sectionName) at System.Web.Configuration.RuntimeConfig.GetSection(String sectionName, Type type, ResultsIndex index) at System.Web.Configuration.RuntimeConfig.get_HealthMonitoring() at System.Web.Configuration.HealthMonitoringSectionHelper..ctor() at System.Web.Management.HealthMonitoringManager..ctor() at System.Web.Management.HealthMonitoringManager.Manager() at System.Web.Management.WebBaseEvent.RaiseRuntimeError(Exception e, Object source) at System.Web.HttpResponse.ReportRuntimeError(Exception e, Boolean canThrow, Boolean localExecute) at System.Web.HttpRuntime.FinishRequest(HttpWorkerRequest wr, HttpContext context, Exception e) --> --. (Microsoft.ReportingServices.Designer)
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.ReportingServices.Designer)
------------------------------
The request failed with HTTP status 404: Not Found. (Microsoft.ReportingServices.Designer)
