How To Prevent Column Name From Being Displayed/returned From A Query
May 17, 2008
Hi
In a query in Management Studio, I want to output data to a text file (via Results in text button) without column names and hyphens or dashes, I have searched all SET commands with bad luck because SET FMTONLY OFF do exactly the opposite.
I know this could be a silly question because I have received suggestions in other ways to do that, but I am intrigued If there is a way to prevent column name from being displayed/returned from a query.
@@version yields
Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 2)
Thank you very much, best regards
japonce
View 4 Replies
ADVERTISEMENT
Aug 17, 2005
Hi there,
I¡¦ve got a table with the following as well as other info:
User ID
DirectoryTypeID (int)
Region ID (int)
I need to run a query where I could get the region ID, then, in the second column, I¡¦d get all distinct directory types within that region. For example, if I run the query:
subRegionAreaID directoryTypeID
--------------- ---------------
3 1
3 2
3 3
3 9
If need these results to be:
subRegionAreaID directoryTypeID
--------------- ---------------
3 1, 2, 3, 9
Is this possible?
Many Thanks!! ļ
Grazi
View 1 Replies
View Related
Jun 20, 2006
I have a strange problem. I have some code that executes a sql query. If I run the query in SQL server query analyzer, I get a set of data returned for me as expected. This is the query listed on lines 3 and 4. I just manually type it into query analyzer.
Yet when I run the same query in my code, the result set is slightly different because it is missing some data. I am confused as to what is going on here. Basically to examine the sql result set returned, I write it out to an XML file. (See line 16).
Why the data returned is different, I have no idea. Also writing it out to an XML file is the only way I can look at the data. Otherwise looking at it in the debugger is impossible, with the hundreds of tree nodes returned.
If someone is able to help me figure this out, I would appreciate it.
1. public DataSet GetMarketList(string region, string marketRegion)2. {3. string sql = @"SELECT a.RealEstMarket FROM MarketMap a, RegionMap b " + 4."WHERE a.RegionCode = b.RegionCode"; 5. DataSet dsMarketList = new DataSet();6. SqlConnection sqlConn = new SqlConnection(intranetConnStr); 7. SqlCommand cmd = new SqlCommand(sql,sqlConn);8. sqlConn.Open();9. SqlDataAdapter adapter = new SqlDataAdapter(cmd); 10. try11. {12. adapter.Fill(dsMarketList);
13. String bling = adapter.SelectCommand.CommandText;//BRG 14. dsMarketList.DataSetName="RegionMarket"; 15. dsMarketList.Tables[0].TableName = "MarketList"; 16. dsMarketList.WriteXml(Server.MapPath ("myXMLFile.xml" )); // The data written to 17. myXMLFile.xml is not the same data that is returned when I run the query on line 3&4 18. // from the SQL query 19. } 20. catch(Exception e) 21. { 22. // Handle the exception (Code not shown)
View 2 Replies
View Related
Nov 28, 2007
Hi,
I have exported a report to excel that contains an ntext column. The exported excel file shows "#Error" for the ntext column in some of the rows. If I see the same report in reporting services I don't see any problem. I have checked that this is not any issue with the length of the text. Could you suggest me something on this?
Thanks
Soni
View 5 Replies
View Related
Apr 11, 2008
Hi all I'm using Sql server 2000 and sometimes i need to run my Queries in Query analizer before using them in my application just to test them...BUT most of the time when i run a query in query-analizer for second time ,query analizer populates the result (records) more quicker then the first time. Apparently it caches the query !!! i don't know but for some reasons i dont't want this , so how can i prevent Query-analizer from doing so?
Thanks in advance. Regards.
View 4 Replies
View Related
Dec 17, 2014
Whenever I open a new query I see 3 vertical lines on the screen, from top to button. Did a full reinstall, and they are still there. How to get rid of them?
View 7 Replies
View Related
Feb 26, 2001
Hi,
I am using SQL Server 7.0.
I have a table with one column defined as Varchar(8000).
The table is populated with rows..
However when I do a Select * from the the Table in query analyzer I only see about 200 Characters even though each column has 8000 characters.
How can I increase the number of characters that are diplayed in the Query Analyzer?
Thankx
KP
View 1 Replies
View Related
Sep 27, 2007
I have the following sql:SELECT courseModuleCode FROM courses WHERE courseCode like '%' + @prefixText + '%'UNION
SELECT courseName FROM courses WHERE courseName like '%' + @prefixText + '%'
UNIONSELECT TeacherName FROM courses WHERE TeacherName like '%' + @prefixText + '%' it returns one column, i want to name tha column as "words"how do i do it?thanks
View 3 Replies
View Related
Nov 18, 2015
How can I prevent duplicate records in the query
With
Property AS
(
SELECT
*
FROM dbo.MulkiyetBase
),
Document AS
(
SELECT
[code]....
View 4 Replies
View Related
Nov 21, 2006
I have a web page that has been in production for over a year. On occasion the web app users report sporadic errors which last a few minutes then go away. The page loads up a generic DataSet, and then that DataSet is assigned to a datagrid on the page. The error is that a column that is expected to be in the dataset is not found. I know this column must exist in the database because its a required field. After we reset IIS, then all returns to normal and the errors go away. Below is the stack trace.
Exception: System.IndexOutOfRangeException Message: Cannot find column LastName. Source: System.Data at System.Data.DataTable.ParseSortString(String sortString) at System.Data.DataView.UpdateIndex(Boolean force) at System.Data.DataView.SetIndex(String newSort, DataViewRowState newRowStates, DataFilter newRowFilter) at System.Data.DataView..ctor(DataTable table, String RowFilter, String Sort, DataViewRowState RowState) at MySystem.Web.GuestSearch.ShowResults(DataSet ds, Int32 currentPageIndex) at MySystem.Web.GuestSearch.LoadResults(Int32 currentPageIndex) at MySystem.GuestSearch.btnSearch_Click(Object sender, EventArgs e) at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) at System.Web.UI.Page.ProcessRequestMain()
Our DBA can find no problems on the database side and our web servers don't log any system event problems either. I do not understand why resetting IIS helps the issue. I need to find the real cause of the problems rather than just resetting IIS all the time. Any ideas?
View 1 Replies
View Related
Jan 4, 2005
say i have a table, and in it are two columns, column1 and column2 and i do the following query:
SELECT column1, column2 FROM table WHERE column2 = '12345'
i want to check if column1 has all the same values, so in the first case, no
column1 column2
------- --------
4 12345
9 12345
5 12345
column1 column2
------- --------
9 12345
9 12345
9 12345
in the 2nd case, column1 contains all the same values, so yes
is there anyway i can check this? i would be doing this in a trigger.. say when a new row is inserted, the value of column1 is inserted, but col 2 is null.. so when they try to fill in the value for col2 of that row, the trigger checks to see if the value they put for col 2 is already in the table.. if it isn't, then everything is ok. but if it is already in teh table, then it checks col1 to see if all the values of col1 are the same
i hope this makes sense
thanks
View 2 Replies
View Related
Feb 7, 2008
Hi All,
Is there a way to hide a column if there is no data for that column? Suppose that I have a SP (lets call it wrapper) which will call multiple SP's. But for any one run, there'll be only one SP which is called. But the columns returned by these SP's is obviously different. So, in order to accomodate the output, can I create a table, add all the possible columns to it, and set the properties of the individual columns such that they will be hidden if there is no data in them? Example, SP 1 returns - ServerName, Location, OS ; SP 2 returns ServerName and location only. Now if the wrapper SP calls only the second SP (SP 2) can I configure in such a way that the third column (OS) is not displayed at all? (In normal cases, it would appear but without any data in it)...
Hope the question is clear... Thanks a lot..
Manoj.
View 8 Replies
View Related
Dec 2, 2014
I am trying to find a way to lock rows of data used in a SELECT query from being read by another SELECT query.
I could do a "begin tran - select - update - rollback" sequence but was wondering if there is a cleaner way to do this??
Tried UPDLOCK, ROWLOCK, TABLOCK, HOLDLOCK in multiple variations but none seem to block the select.
View 9 Replies
View Related
Jul 30, 2007
Hello,
I have a select statement that looks like this:
SELECT TOP 10 [Id], [Abstract] FROM NewsArticles
Abstract is a TEXT Column. I'd like to limit it to 50 characters... how would I do that.
Thanks,
-- shawn
View 4 Replies
View Related
Apr 17, 2008
I am building reports against our TFS development db.
One of the reports tracks days spent (Dwell Time) in various status categories (eg: New, Assigned, In Development, Hold, etc) for a given "ticket".
For a fixed list of values from {Work Item].System_State, I can send the results (days in Assigned) to the column named (Assigned) for each status for each event in the [Work Item History], and then sum them for each ticket as:
Ticket ID New Assigned InDev etc
1230001 2 0 0 ...
1230001 0 1 2 ....
SUM 2 1 2 ....
However, I have many different Projects, each of which use their own Status names.
I don't want to duplicate the same basic report, if I can avoid it.
How can I name and generate this data for the unique Status list for each Project?
Simplest analog is: name = First(Fields!Status.Value, "TFSdb")
and allows value for a column name (category) as: =IIF(Fields!Status.Value = First(Fields!Status.Value, "TFSdb"), Fields!Days.Value, 0)
However this fails beause:
1. It only delivers the FIRST status value, and,
2. I cannot SUM an expression which is itself an aggregate (using First).
View 4 Replies
View Related
Sep 15, 2006
I have a question regarding the values returned in the SEARCHABLE column of the system stored procedure sp_datatype_info. What do ALL of the values mean? The SQL Server BOL only provides meanings for the values 0 and 1, but I am also seeing values 2 and 3. What are the meanings of these values?
Thanks,
Sean
View 2 Replies
View Related
Nov 13, 2015
I can preview the SQL command in the OLE DB Source Editor and bring back all columns and results just fine but when I click on the Columns I get
TITLE: Microsoft Visual Studio
------------------------------
The component reported the following warnings:
Error at Data Flow Task [OLE DB Source [1]]: No column information was returned by the SQL command.
The columns are there in the preview - why can't SSIS get the column information?
View 6 Replies
View Related
Jul 10, 2007
Hi, I was wondering if any SQL Server gurus out there could help me...I
have a table which contains text resources for my application. The text
resources are multi-lingual so I've read that if I add a html language
indicator meta tag e.g.<META NAME="MS.LOCALE" CONTENT="ES">and
store the text in a varbinary column with a supporting Document Type
column containing ".html" of varchar(5) then the full text index
service should be intelligent about the language word breakers it
applies when indexing the text. (I hope this is correct technique for
best multi-lingual support in a single table?)However, when I come to query this data the results always return 0 rows (no errors are encountered). e.g.DECLARE @SearchWord nvarchar(256)SET @SearchWord = 'search' -- Yes, this word is definitely present in my resources.SELECT * FROM Resource WHERE CONTAINS(Document, @SearchWord)I'm a little puzzled as Full Text search is working fine on another table that employs an nvarchar column.Any pointers / suggestions would be greatly appreciated. Cheers,Gavin.
View 1 Replies
View Related
Jul 10, 2007
Hi, I was wondering if any SQL Server gurus out there could help me...
I have a table which contains text resources for my application. The text resources are multi-lingual so I've read that if I add a html language indicator meta tag e.g.
<META NAME="MS.LOCALE" CONTENT="ES">
and store the text in a varbinary column with a supporting Document Type column containing ".html" of varchar(5) then the full text index service should be intelligent about the language word breakers it applies when indexing the text. (I hope this is correct technique for best multi-lingual support in a single table?)
However, when I come to query this data the results always return 0 rows (no errors are encountered). e.g.
DECLARE @SearchWord nvarchar(256)
SET @SearchWord = 'search' -- Yes, this word is definitely present in my resources.
SELECT * FROM Resource WHERE CONTAINS(Document, @SearchWord)
I'm a little puzzled as Full Text search is working fine on another table that employs an nvarchar column.
Any pointers / suggestions would be greatly appreciated. Cheers,
Gavin.
View 1 Replies
View Related
Oct 15, 2007
GRANT SELECT ON [dbo].[TblAreaCatmap] TO [admin] prevent grant from being automaticly add to each column?
Is there a way when you issue a grant select to a table or a view to not also grant select for each column.
The problem is when you use the grant command it automaticly adds the grant command to each column. I want to grant the permission at the table level so when the table is scripted it only has a single grant command instead of a grant for the table and a grant for each column which is not needed.
The sql managemnt studion interface will allow you to do this but onlt by using the interface. If you issue the above command from a query window it also creates A GRANT FOR EVERY COLUMN. How can I stop this behavior.
View 9 Replies
View Related
Jan 24, 2012
I am getting the following results from my query that contains a subquery, but I don't understand why the values in the [Total Volume M_Active_Previous] are being repeated with the same value. I should be getting different values returned for each row like in the [Total Volume M_Active] column.
Why the values are all the same and how I can fix this?
DayNoDayTotal Volume M_ActiveTotal Volume M_Active_Previous
6 Friday11161 72491
7 Saturday5687 72491
2 Monday14354 72491
1 Sunday3966 72491
4 Wednesday12340 72491
3 Tuesday12018 72491
5 Thursday11833 72491
Here is the SQL I'm using.
Code:
DECLARE @StartDate datetime, @EndDate datetime, @Prev_StartDate datetime, @Prev_EndDate datetime
SET @StartDate = '2011-03-13 00:00:00.000'
SET @EndDate = '2011-03-19 23:59:59.999'
SET @Prev_StartDate = '2011-03-06 00:00:00.000'
SET @Prev_EndDate = '2011-03-12 23:59:59.999'
[Code] ....
View 5 Replies
View Related
May 26, 2006
I'm a really beginner about sql2000.During my test I have created the following query. It's works ok until Ido't add the code included in section A, when I add it the i obtain theerror: Cursor not returned from queryAnyone can help me?Thanks Carlo M.set nocount onIF OBJECT_ID('storico_big') IS NULL --- section A begincreate table storico_big( data datetime,bcarrier varchar(20),bda CHAR(30),bzone char(50),bdur int) ;insert into storico_big --- section Aendselect top 10000adetdate,bcarrier,bda,bzone,bdurfrom pp_cdr (nolock)whereadetdate < :data_fin and adetdate > :data_in order by adetdateset nocount off------ end of query
View 3 Replies
View Related
Feb 24, 2008
Hi,
I am executing following script which return more than 1 query/row as there are more than 1 log backup :
select @Query = 'RESTORE LOG ' + @dbName + ' FROM DISK=' + '''' +@path+''''+ ' WITH' + ' NORECOVERY, FILE= ' + convert(varchar(10),Position) from #temp where BackupName = 'Log_Backup' and BackupType = 2 and Position> @Diff_Position EXEC(@QUERY)
[Above script restores database with latest Differential backup file and latest log files. ]
Now I want to execute this, but @Query don't work for more than one row returned . Can you please suggest me how to execute such query?
Thanks,
Dipak.
View 1 Replies
View Related
Dec 26, 2006
Hi Folx,
I am new to
SQL Server. I am rolling summed values from table profile to two columns in table txn. When the value for one (not necessarily both...) column is null, can that value be translated to zero? Or must I write a procedure or use a cursor?
Versions:
Microsoft SQL Server Integration Services Designer
Version 9.00.1399.00
Microsoft SQL Server Management Studio
9.00.1399.00
For example, when version_count for a particular transaction_id is null in the profile table but profile_count has summable integers, how do I update the version_count to zero in the same pass that I update the profile_count?
update txn
set
version_count =
(
select
sum(a.version_count)
from
profile a
where
a.transaction_id=txn.transaction_id
and
a.extraction_date=txn.extraction_date
and
txn.version_count is null
),
profile_count =
(
select
count(*)
from
profile a
where
a.transaction_id=txn.transaction_id
and
a.extraction_date=txn.extraction_date
and
txn.profile_count is null
)
View 5 Replies
View Related
Oct 19, 2006
I would like to make a listbox only appear if there are results returned by the SQL select statement. I want this to be assessed on a click event of a button before the listbox is rendered.I obviously use the ".visible" property, but how do I assess the returned records is zero before it is rendered?
View 3 Replies
View Related
Apr 29, 2004
The query below gets percentage of coils for a location by anneal cycle. It does this correctly (ie, if you change count(*)/b.total to count(*), b.total ... show both columns, the numbers its pulling are correct), but in its current state (trying to divide count by total), it always returns a zero (no decimal values).
If I change that section to : (count(*)*100/ b.total*100)/100, I get integer percentages: no decimals (this is a problem because some records round off to zero). I'm pretty sure this is the entire problem (why I'm getting zeros as written below), but I don't have a clue how to fix it. Is this some kind of server setting that allows the query to only return decimal values or something?
select a.department, a.cycle, count(*)/ b.total percentage
from inventory a join (select department, count(*) total from inventory
where location not like 'bas%' and archived = 0 and quality_code = 'p'
group by department) b on a.department = b.department
where a.archived = 0 and a.quality_code = 'p' and location not like 'bas%'
group by a.department, a.cycle, b.total
order by a.department, a.cycle
View 2 Replies
View Related
Jul 30, 2013
I want to show the number of rows returned by a select query in the result.
e.g. select policy,policynumber,datecreated,Firstname, '-' as recordcount from policy
If it returns 5 rows, then the 'recordcount' need to show '5' in all row in the result
OutPut
0y96788,HGYG564,29/07/2013,SAM,5
FJUFBN7,JLPIO67,29/07/2013,Test,5
...
..
..
How can i get this number in the result.
View 3 Replies
View Related
Apr 25, 2006
Gurus.I do not know if it is possible, but here is what I want to do.I want to allow user to page the SQL result, so he could decides toreturn from row 10 to row 20, or row 100 to 200, without returns thewhole resultset. Every time he sends another request, I do not mind tohit the database again, (I do not want to cache the result in themiddle tier server, scalability issue), and I know that I could achievethis with CURSOR, but unfortunately the FOR XML is not allowed in aCURSOR statement .(I know that I could achieve what I want to do by writing custom codein the middle tier, but I just want to see if there is a way to do thison the database side.)Any comments & suggestion is greatly appreciated.Thanks in advance.(I am using SQL2005)John
View 2 Replies
View Related
Apr 16, 2007
Dear Friends,
I have an OLE DB Command inside an ETL. I want to execute a stored procedure that returns 2 fields, for example:
CREATE PROCEDURE sp_Name
AS
SELECT Field1, Field2 FROM Table
How can I continue the dataflow? How can I return the values from the query? Returns only a row...
View 10 Replies
View Related
May 17, 2007
Hi,
I'm using SqlDataSource control.
Is there a way to know how many records a query has returned?
View 3 Replies
View Related
Dec 13, 2007
Hi all,
I am writing a select query which produces huge xml data.Now i want to read that data from my web application a save it as xml file.
How can i do that.
I am using asp.net vb.net.
View 1 Replies
View Related
Jan 12, 2005
i have a table and a column called req_id, i have it set as the primary key.. so if i just do SELECT * FROM table, shouldnt the rows returned be sorted by the order that the rows were inserted?
this database was improted from an access database.. when i did that in access it would return the rows in sorted order by the order the row was inserted.. but now in MS SQL, its not sorted in that order.. i can't really tell what type of order it's in
View 6 Replies
View Related
Mar 3, 2004
I'm getting this error in a simple DTS package.
No query specification returned by transform status.
Any ideas what's causing this ?
DTS is simply running a query (which returns data via preview)
and insert results into a table.
Thanks
Mark
View 1 Replies
View Related
