How To Return Multiple Results In 1 Fetch Cursor- Urgent Help!
Oct 7, 2004
I want to send 1 email with all clientname records which the cursor gets for me.
My code however is sending 1 email for 1 record i.e clientname got from db. What's wrong? please help.
I ano table to understand here about the while if right.
thanks.
+++++++++++++++++++++++++++++++++++++++++
CREATE PROCEDURE test1
AS
declare @clientName varchar(1000)
declare myCursor CURSOR STATIC
for
select client_name
from clients
-------------------------
-- now prepare and send out the e-mails
declare @ToEmail varchar(255)
declare @FromEmail varchar(255)
declare @Subject varchar(255)
declare @Body varchar(2000)
declare @UserID numeric(38)
declare @UserName varchar(255)
declare @SMTPServer varchar(100)
set @SMTPServer = 'test.testserver.com'
-- loop for each record
open myCursor
fetch next from myCursor
into @clientName
--loop now:
while (@@fetch_status=0)
begin -- while(@@fetch_status=0)
-- check if valid "To" e-mail address was found
if ((@clientName is null) or (ltrim(@clientName) = ''))
begin
--should not come here anytime ideally
set @FromEmail = 'me@test.com'
set @ToEmail = 'me@test.com'
set @Subject = 'was emailed to wrong person'
set @Body = 'the client name got is : '+ @clientName + 'client is null or empty'
end --if
else
begin
set @FromEmail = 'me@test.com'
set @ToEmail = 'me@test.com'
set @Subject = '-testing'
set @Body =
'this will send
ClientName:'+ @clientName
end --end else
-- send the e-mail
--exec dbo.usp_SendCDOSysMailWithAuth @FromEmail, @ToEmail, @Subject, @Body, 0, @SMTPServer
--fetch next from myCursor into @clientName
fetch next from myCursor
into @clientName
end --while(@@fetch_status=0)
exec dbo.usp_SendCDOSysMailWithAuth @FromEmail, @ToEmail, @Subject, @Body, 0, @SMTPServer
close myCursor
deallocate myCursor
I want to put the fetch results of a cursor to a temporary DB for manipulation, Im selecting all columns from the table in the cursor and the number of total columns is unknow.
I seem to have a few problems with the below double cursor procedure. Probably due to the fact that I have two while loops based on fetch status. Or???
What I want to do is select out a series of numbers in medlemmer_cursor(currently set to only one number, for which I know I get results) and for each of these numbers select their MCPS code and gather these in a single string.
For some reason the outpiut (the insert into statement) returns the correct number 9611 but the second variable @instrumentlinje remains empty.
If I test the select clause for 9611, it gets 4 lines. So to me its like the "SELECT @instrumentlinje = @instrumentlinje + ' ' + @instrument" statement doesn't execute.
DELETE FROM ALL_tbl_instrumentkoder
DECLARE @medlem int DECLARE @instrument varchar(10) DECLARE @instrumentlinje varchar(150)
DECLARE medlemmer_cursor CURSOR FOR SELECT medlemsnummer FROM ket.ALL_tbl_medlemsinfo (NOLOCK) WHERE medlemsnummer = 9611
DECLARE instrumenter_cursor CURSOR FOR SELECT [MCPS Kode] FROM Gramex_DW.dbo.Instrumentlinie (NOLOCK) WHERE Medlemsnummer = @medlem
OPEN medlemmer_cursor
FETCH NEXT FROM medlemmer_cursor INTO @medlem
WHILE @@FETCH_STATUS = 0 BEGIN
OPEN instrumenter_cursor FETCH NEXT FROM instrumenter_cursor INTO @instrument
WHILE @@FETCH_STATUS = 0 BEGIN SELECT @instrumentlinje = @instrumentlinje + ' ' + @instrument FETCH NEXT FROM instrumenter_cursor INTO @instrument END
CLOSE instrumenter_cursor
INSERT INTO ALL_tbl_instrumentkoder VALUES(@medlem, @instrumentlinje)
FETCH NEXT FROM medlemmer_cursor INTO @medlem
END
CLOSE medlemmer_cursor DEALLOCATE medlemmer_cursor DEALLOCATE instrumenter_cursor
I have no idea to write a store procedure or only query to pass a string parameter more than 4000 characters into execute() and return result for FETCH and Cursor.
Summary * The fetch next statement returns multiple rows when using a dynamic cursor on the sys.dm_db_partition_stats. * As far as I know a fetch-next-statement always returns a single row? * Using a static cursor works as aspected. * Works on production OLTP as well as on a local SQL server instance.
Now the Skript to reproduce the whole thing.
create database objects
-- create the partition function create partition function fnTestPartition01( smallint ) as range right for values ( 1, 2, 3, 4, 5, 6, 7, 8 , 9, 10 ) ;
[Code]....
Why does the fetch statement return more than 1 row? It returns the whole result of the select-statement. When using a STATIC cursors instead I get the first row of the cursor as I would expect. Selecting a "normal" user table using a dynamic cursor I get the first row only, again as expected.
The problem I'm having is that I need a cursor to return multiple results into 1 .NET System.Data.DataTable, and I don't know if it's possible. Actually, the real problem I'm having is that whoever designed this database did a poor job and if it weren't for one small thing I could do this all with aggregates...
But more specifically, this is what I need to accomplish. I have written a cursor that I know works - when I run it in MS SQL Query Analyzer, I get the results I want, but it's returned in multiple tables. I am maintaining a .NET application with some pretty lousy performance and I'm trying to boost it up. I need to take the cursor's results, stuff them into a DataTable, and then return that table to my web application to render.
In my C# code, I am using a SqlDataAdapter to execute my query. This is what I'd like to do...
/*assume query is my working cursor, InvoiceDBConnection is not null, and dt is an empty, non-null DataTable*/
SqlDataAdapter sda = new SqlDataAdapter(query, InvoiceDBConnection); sda.Fill(dt);
... but this doesn't work, and it makes sense, I guess...since the cursor returns multiple "tables" (not sure if that's actually how the data is returned).
So is there any way to accomplish what I want to do? Or do I have to do it the crappy way it's done now by running my aggregate query and then using a really time-consuming for loop on my results to make the necessary adjustment?
I want my cursor to loop at the same APID then assign one ITID then move to the next APID and so on...
Any help is highly appreciated....
SET QUOTED_IDENTIFIER OFF GO SET ANSI_NULLS OFF GO
ALTER PROCEDURE InsNewEmployeeImpTaskP2 @REID int, @LOID int, @RetValintoutput
AS
Declare @RRID int Declare @APID int Declare @intREID varchar(20) Declare @intIMID varchar(20)
Declare crReqRec cursor for select RRID from RequestRecords where REID = @REID and RRSTatus = 'AC' and APID is not null open crReqRec fetch next from crReqRec into @RRID
set @APID = (select APID from RequestRecords where REID = @REID and RRID = @RRID)
set @intIMID = (SELECT ImplementationGroup.IMID FROM ImplementationGroup_Location INNER JOIN ImplementationGroup ON ImplementationGroup_Location.IMID = ImplementationGroup.IMID INNER JOIN Applications_ImplementationGroup ON ImplementationGroup.IMID = Applications_ImplementationGroup.IMID where APID = @APID and ImplementationGroup_Location.LOID = @LOID )
insert into ImplementationTasks ( IMID, ITStatus, ITStatusDate ) VALUES ( @intIMID, '2', GetDate() ) SET @RetVal = @@Identity while @@fetch_status = 0 Begin
Update RequestRecords set ITID = @RETVal, RRStatus = 'IA' where REID = @REID and RRID = @RRID
FETCH NEXT FROM crReqRec into @RRID end
close crReqRec deallocate crReqRec
GO SET QUOTED_IDENTIFIER OFF GO SET ANSI_NULLS ON GO
Hi, I'm relatively inexperienced in sql, and am having trouble interpreting the behavior of a cursor in some code I have inherited. When there is a record in both the Filters and FilterElements tables, the fetch_status is 0. If there is a record in Filters, but no child record in FilterElements, the fetch_status is -1. Since the tables are joined with a RIGHT OUTER JOIN, even when there is no corresponding record in FilterElements, a record is returned (I have verified running the select in a query window). But when used in a cursor, the record is not fetched. The fetch_status is -1. Can anyone tell me why the fetch doesn't work in this case. Thanks ---- DECLARE @CreatedByUser nchar(100), @WorkflowIDs varchar(50); DECLARE @MyVariable CURSOR; SET @MyVariable = CURSOR FOR SELECT isnull(Filters.WorkflowIDs, ''), isnull(FilterElements.CreatedByUser, '')
FROM Filters RIGHT OUTER JOINFilterElements ON Filters.ItemID = FilterElements.FiltersItemID WHERE FiltersItemID = @FilterID; OPEN @MyVariable;FETCH NEXT FROM @MyVariable INTO @WorkflowIDs, @CreatedByUser;
I am hoping someone can help me with using the cursor and fetch functions. I have not used these features in the past and I am now stuck when trying to use IF statements with the fetch function.
I have a temp table populated with the below headers and their associated data.
The headers are as follows: ItemRcvdKey, TranID, TranDate, QtyReceived, UnitCost, ItemKey, WhseKey, ItemID, ShortDesc, WhseID, QtyOnHand, StdCost.
The information contained in this temp table lists every single receipt of goods against all of our inventoried items. The QtyOnHand listed on each record is the total QtyOnHand for that item in that warehouse. What I need the fetch to do is grab the receipt of goods records, starting with the most recent TranDate, and pull them into the new temp table until the QtyOnHand is reached. The QtyonHand it should be comparing too is the one listed on the first fetched record. Once the Sum of the QtyRcvd is equal to or is greater than the QtyOnHand for that item I need the fetch to move on to the next item number and perform the same function.
One thing I need to be clear on is that if there are 3 Receipt Records(TranID) for Item A in Warehouse A, the total QtyOnHand will be listed 3 times. I need to make sure that the Fetch is comparing all the records for Item A in Warehouse A to one instance of the QtyOnHand.
The other aspect is that there will be receipt of goods for the same item in multiple warehouses. So I also need the Fetch to be sure that when it is grabbing records and putting them in the temp table, it makes sure it is matching the ItemID and the WhseID with the record it started with.
The current script I have written is below. If you can offer any help I would greatly appreciate it.
Open a cursor , Fetch the record , during this kind of operation , will the specific table be locked and fail to be updated or select by another session ?
I write few lines to do a bottom-up calculation, with 'fetch last' and 'fetch prior'.
It seems that the condition 'WHILE @@FETCH_STATUS = 0' does not work when cursor arrives at the first line, as there is an error message:
'(1 row(s) affected) 6255.84 (1 row(s) affected) Msg 16931, Level 16, State 1, Line 18
There are no rows in the current fetch buffer.
The statement has been terminated.'
how to fix the error?
Here is my code:
DECLARE @lastprice real DECLARE @updatedprice real DECLARE @updatedRe real DECLARE @updatedAUX real SET @lastprice = ( SELECT Close_P from #ClosePrice where #ClosePrice.DateTD = (SELECT MAX(#ClosePrice.DateTD) FROM #ClosePrice) )
I have searched the net for an answer but could not find one. When I declare a table variable and then try to insert fetched row into the table variable like:
Code Snippet declare @table table (col1 nvarchar(50), col2 nvarchar(50)) declare curs for select * from sometable open curs fetch next from curs into @table
I got a problem. I am working on DTS package. The last step is updating a table field. I wrote a stored procedure as below:
CREATE PROCEDURE [Update_product_manufacturer] AS
Declare @product_id int Declare @supplier_name VarChar (255)
Declare ValueCursor Cursor For
select product.product_id, [P21_SUPPLIER_id_name_ke].[supplier_name] from [VARIANT],[P21_INV_MAST_uid_itenID_weight_ke],[product], [P21_INVENTORY_SUPPLIER_uid_supplierID_price_cost_k e],[P21_SUPPLIER_id_name_ke] where [product].product_id = [VARIANT].[product_id] and [P21_INV_MAST_uid_itenID_weight_ke].[item_id]=[VARIANT].[SKU] AND [P21_INV_MAST_uid_itenID_weight_ke].[inv_mast_uid]=[P21_INVENTORY_SUPPLIER_uid_supplierID_price_cost_k e].[inv_mast_uid] AND [P21_SUPPLIER_id_name_ke].[supplier_id]=[P21_INVENTORY_SUPPLIER_uid_supplierID_price_cost_k e].[supplier_id] order by [product].[product_id] for read only
Open ValueCursor while (0 = 0) begin fetch next from ValueCursor Into @product_id, @supplier_name
update product set manufacturer = @supplier_name where product_id = @product_id
end
close ValueCursor Deallocate ValueCursor
Notes: Table: Product has 28,000 rows, other tables with 28,000 - 56,000 rows
it's been 2 hours, the job is still working.
Who has this kind of experience? How can I make updating quickly?
I have a procedure in Oracle that contains the following cursor:
CURSOR SCHED_TRIPS IS SELECT TRAVELDATE, STOP_NUM, TRIPID, STOP_TYPE, PROMISED_TIME, ETA, PERFORM_TIME, DEPART_TIME, ETD, DRIVERWAIT, PASSENGERWAIT, TRIPTIME, GROUP_ID FROM Dbo.SCHEDTRIPS_VIEW WHERE UNQ_ID = SESSION_ID AND TRUNC(TRAVELDATE) = TRUNC(TDATE) AND DISPOSITION <> 'V'; BEGIN FOR S IN SCH_TRIPS LOOP UPDATE dbo.SCHEDULES T SET T.DIRTYBIT = 1 WHERE T.TRIPID = S.TRIPID AND T.STOP_TYPE = S.STOP_TYPE AND (T.STOP_NUM <> S.STOP_NUM OR T.ETA <> S.ETA);
UPDATE dbo.SCHEDULES T SET T.STOP_NUM = S.STOP_NUM, T.PROMISED_TIME = S.PROMISED_TIME, T.ETA = S.ETA, T.ETD = S.ETD, T.LAST_CHANGED = SYSDATE WHERE T.TRIPID = S.TRIPID AND T.STOP_TYPE = S.STOP_TYPE; END LOOP; COMMIT ; END;
My problem is with the line shown in Red. What will be the T-SQL equivalent for this line.
as declare @From varchar(8000) declare @Subject varchar(8000) declare @Body varchar(4000) declare @smtp varchar(8000) declare @counter int, @tbl varchar(8000) Declare @MailID int Declare @hr int Declare @To varchar(8000) Declare @tblquery varchar(8000) declare @id int, @deptemail varchar(8000), @tmpmth varchar(8000), @usedb varchar(8000) set @from = 'name@mail.com' set @subject = 'testheader' set @body = 'testing successful' set @smtp = 'smtp.com'
--========================================================================= --============================ get database name ======================= IF (LEN(MONTH(GETDATE())) = 1) BEGIN Set @TmpMth = '0' + CAST(MONTH(GETDATE()) AS varchar(2)) --01 END ELSE BEGIN Set @TmpMth = CAST(MONTH(GETDATE()) AS varchar(2)) --12 END SET @UseDB = 'DATA' + CAST(YEAR(GETDATE()) AS varchar(4)) + @TmpMth --aia_DATA200712 --=================================================================== --============================ get table number ======================= set @counter = 1 while @counter >= 59 begin IF (LEN(@counter) = 1) BEGIN Set @Tbl = '0' + @counter --01 END ELSE BEGIN Set @Tbl = @counter --12 END
--=========================check if table being created exists IF EXISTS (SELECT 1 FROM information_schema.schemata WHERE catalog_name = 'temptable') GOTO table_1 --=================================== get all email accounts ===================== set @tblquery = ' select ID, Email INTO temptable FROM ( select distinct d.id, d.email from tt32_aia.dbo.department d right outer join tt32_aia.dbo.extension e ON (e.parentid = d.id) right outer join ' + @usedb + '.dbo.other' + @tbl + ' data ON (e.extn = data.extn) where callclass = '''' or callclass is null UNION ALL select distinct d.id, d.email from tt32_aia.dbo.department d right outer join tt32_aia.dbo.extension e ON (e.parentid = d.id) right outer join ' + @usedb + '.dbo.inward' + @tbl + ' data ON (e.extn = data.extn) where callclass = '''' or callclass is null UNION ALL select distinct d.id, d.email from tt32_aia.dbo.department d right outer join tt32_aia.dbo.extension e ON (e.parentid = d.id) right outer join ' + @usedb + '.dbo.local' + @tbl + ' data ON (e.extn = data.extn) where callclass = '''' or callclass is null UNION ALL select distinct d.id, d.email from tt32_aia.dbo.department d right outer join tt32_aia.dbo.extension e ON (e.parentid = d.id) right outer join ' + @usedb + '.dbo.other' + @tbl + ' data ON (e.extn = data.extn) where callclass = '''' or callclass is null )data DECLARE deptemail_cursor CURSOR FOR select id, email from temptable where id is not null '
--============================================================================= --====just above you can see the cursor.. below is sending the emails --======================================================================
exec(@tblquery)
OPEN deptemail_cursor
FETCH NEXT FROM deptemail_cursor INTO @id, @deptemail
WHILE @@FETCH_STATUS = 0 BEGIN --If LEN(@deptemail) > 0 --BEGIN set @to = @deptemail EXEC @hr = sp_OACreate 'CDo.message', @MailID OUT --CDo.message |CDONTS.NewMail <-- different mail server EXEC @hr = sp_OASetProperty @MailID , 'Configuration.fields("http://schemas.microsoft.com/cdo/configuration/sendusing").Value','2' EXEC @hr = sp_OASetProperty @MailID , 'Configuration.fields("http://schemas.microsoft.com/cdo/configuration/smtpserver").Value', @smtp EXEC @hr = sp_OASetProperty @MailID , 'From', @From EXEC @hr = sp_OASetProperty @MailID , 'HTMLBody', @Body EXEC @hr = sp_OASetProperty @MailID , 'Subject', @Subject EXEC @hr = sp_OASetProperty @MailID , 'To', @to EXEC @hr = sp_OAMethod @MailID , 'Send', NULL EXEC @hr = sp_OADestroy @MailID --END FETCH NEXT FROM deptemail_cursor INTO @id, @deptemail END
CLOSE deptemail_cursor DEALLOCATE deptemail_cursor
Table_1: drop table temptable return
set @counter = @counter + 1
end
this is suppose to send email automatically to every email account that it will get from all the tables (around 250 tables). the problem is its not sending, but if i try to take my code outside of the "SET @COUNTER = @COUNTER + 1 END" and close the if statement above, i can produce the correct result.. i'm thinking maybe its the positioning? but, there could be some overhauling needed to do with this.. sorry for posting the sp. sorry for the trouble.. please help me
I have been trying to write a cursor to fetch required data from table but somehow its running forever and inserting duplicate records.
I have a temp table named getInvoice where I have five important columns
1. invoice number 2.group 3.invoice status 4. Invoice Expiration date 5. Creation date time
and some other columns.One invoice number can belong to one or more group and there can be one or more records for a particular invoice number and group.
An example is below :
InvoiceNumber Group InvoiceStatus InvoiceExpirationDate CreationDateTime
My query condition is complex and that is why Im facing problem retrieving the output.I need a cursor for getting distinct invoice number from the table and for each invoice number I need to get the latest record for each invoice number and suffix combination based on creationdateand time column and if that record has invoice status of 2 and also the invoice expiration date can be either null or greater than today's date, then I need to get that record and put it in a temp table.
The query I wrote is below
declare myData cursor for select distinct invoiceNumber from #getInvoice declare @invoiceNumber varchar(30) open myData fetch next from myData into @invoiceNumber while @@FETCH_STATUS = 0
I have two tables one with current data and a second with the same design that holds purged history.
I was going to create view and then jsut use a where clause to filter both tables but I figured it would be faster if the where clause was passed into each query as opposed to the whoel view having to load and then be filtered.
Select PatientName, MemberId FROM CLAIMS WHERE MemberID = @MemberID UNION Select PatientName, MemberId FROM CLAIMSHistory WHERE MemberID = @MemberID
But it appears that if there are no records in the first statement that the whole thing fails. I tried the union all operator with out any luck either.
Now if had a view like this; Create view vAllClaims as Select PatientName, MemberId FROM CLAIMS UNION Select PatientName, MemberId FROM CLAIMSHistory
And said select * from vAllClaims where memberid = 12345 would the query optimizer put the build the where statement onto each subquery or pull all the data first and query it?
Attempt to fetch logical page (3:8360) in database 'XYZ' belongs to object '1934538212', not to object 'product'. [SQLSTATE HY000] (Error 605). The step failed.
Hi All, I have a stored proc which is executing successfully...but the results of that stored proc are displaying in the Messages Tab instaed of results Tab. And in the Results Tab the results shows as 0..So, Any clue friends..it is very urgent..I am trying to call this stored proc in my Report in SSRS as well but the stored proc is not displaying there also...Please help me ASAP..
I have a dropdown list with checkbox and when I select multiple options and search, its returning only the last selected value in the grid. Here is the code I use it for search. Designation is the column where I bind its values to the checkbox.
Just upgraded from 6.5 to 7 and in query analyzer I get double spaced results on queries that previously single-spaced. Installed 2000 QA and still get same results. Is there a setting that we are missing or a workaround to this?
Note ==> The cursor query returns single spaced results when ran alone.
Test code below:
DECLARE @pol char(10) DECLARE testcursor CURSOR FOR SELECT policy_no FROM policy_history WHERE policy_chg_end_dt is null and policy_deleted_sw = 0
OPEN testcursor FETCH NEXT FROM testcursor INTO @pol
WHILE @@FETCH_STATUS <> -1 BEGIN SELECT @pol FETCH NEXT FROM testcursor INTO @pol END
I'm working on a procedure that needs to cycle through the records of some raw data and combine the the current record with the datetime field of the prior record. I have been able to write a script to do that with cursors and variables but my problem is it returns each record separately. How do I go about getting the procedure to return all the records as one set of data?
To see what I mean, the following script for the Pubs DB returns each pass through the data as a seperate query. Since I can't do a select *, what approach should I take? If you want the actual script, I would be happy to provide it.
DECLARE authors_cursor CURSOR FOR SELECT * FROM authors OPEN authors_cursor FETCH NEXT FROM authors_cursor
WHILE @@FETCH_STATUS = 0 begin FETCH NEXT FROM authors_cursor end
I think it was Pat Phelan who posted a little trick here where he used the STUFF function to create a string fo values from a column without using a cursor.
I am starting a brand new project and I did my table design and I am awaiting a finalized requirements document to start coding and I thought I would spend a little time writing some code to autogenerate some generic one record at a time SELECT, INSERT,UPDATE and DELETE stored procedures. With the coming holiday things are getting quiet around here.
The code that is not working is listed below. It does not work. It returns Null. I suck.
DECLARE @column_names varchar(8000)
SET @column_names = ''
SELECT @column_names = STUFF(@column_names,LEN(@column_names),0,C.COLUMN_ NAME + ', ') FROM INFORMATION_SCHEMA.COLUMNS C WHERE TABLE_NAME = 'MyTable'
I have created the following stored procedure to get the text from one table and compare with them with another table and the one's that match will assign the corresponding ID. But the problem is that it only assigns the last id in the table from the main table which new_cur2 holds. So the problem is that its not updating with the correct ID its just updating with the last ID the cursor holds. Does any one know what it could be.....I think it may just be a little coding error....thanks
CREATE PROCEDURE [MYSP] AS
Declare @pdesc nvarchar(30) Declare @ssc int Declare @myid int Declare @name nvarchar(30)
Declare new_cur CURSOR DYNAMIC FOR SELECT ProductDescription, SubSubCatID FROM C2000HPB FOR UPDATE
Open new_cur FETCH FROM new_cur INTO @pdesc, @ssc While @@FETCH_STATUS = 0
BEGIN Declare new_cur2 CURSOR DYNAMIC FOR SELECT SubSubCatID, SubSubCategory FROM SSC FOR READ ONLY
Open new_cur2 FETCH FROM new_cur2 INTO @myid, @name While @@FETCH_STATUS = 0
BEGIN IF PATINDEX ('@name%',@pdesc) = 0 Set @ssc = @myid UPDATE C2000HPB SET SubSubCatID = @ssc FETCH NEXT FROM new_cur2 INTO @myid, @name
END
Close new_cur2 DEALLOCATE new_Cur2 FETCH NEXT FROM new_cur INTO @pdesc,@ssc END Close new_cur DEALLOCATE new_Cur
I'm trying to create an email report which gives a result of multiple results from multiple databases in a table format bt I'm trying to find out if there is a simple format I can use.Here is what I've done so far but I'm having troble getting into html and also with the database column:
I am trying to get this query to the point where it will return only results that meet specific conditions. Here is the current query I have:
use mdb SELECT call_req.ref_num, prob_ctg.sym, act_type.sym, act_log.description
FROM call_req INNER JOIN prob_ctg ON call_req.category = prob_ctg.persid INNER join act_log ON call_req.persid = act_log.call_req_id INNER JOIN act_type ON act_log.type = act_type.code
where prob_ctg.sym like 'rd1.%' and prob_ctg.auto_assign=1 and call_req.active_flag=0 ORDER BY call_req.ref_num, act_log.time_stamp DESC
This produces results as follows:
I3835493FY15 RD1.Desktop Transfer Transfer Asignee from " to Jordana, Jose" I3835493FY15 RD1.Desktop Close Status changed from 'Resolved' to 'Closed' I3835493FY15 RD1.Desktop Close Status changed from 'Open' to 'Resolved' I3835493FY15 RD1.Desktop Event Occurred AHD05447 No eligible Request Locations I3835493FY15 RD1.Desktop Initial Create new request/incident/problem
[Code] .....
This query gives me the total number of records that meet my overall criteria, but what I need to have is a count of the total distinct number of call_req.ref_num and then I need a count of the number of records where act_type.code = TR and the text of act_log.description contains text including "Transfer Group From" and then I need a count of the records where act_type.code = EVT and the text of act_log.description contains text including "AHD054".
USE AdventureWorksGO-- Retrieve order manifestSELECT SalesOrder.SalesOrderID,SalesOrder.OrderDate,SalesOrder.AccountNumber,SalesOrder.Comment,Item.ProductID,Item.OrderQtyFROM Sales.SalesOrderHeader SalesOrderJOIN Sales.SalesOrderDetail ItemON SalesOrder.SalesOrderID = Item.SalesOrderIDWHERE SalesOrder.SalesOrderID = 436591. Examine the query in the file, noting that it retrieves data from theSales.SalesOrderHeader and Sales.SalesOrderDetail tables in theAdventureWorks database.2. ON the toolbar, click Execute.3. Review the query results.?Modify the query to retrieve <rowelements1. Make the necessary changes to the query to return the data in thefollowing XML format (hint: use FOR XML).Thanks In Advance,~CK
