How To Rotate Or Flip Table.

May 12, 2005

I have a key value pair as listed below.

Key value
------ ----------
name rob
age 30
sex male
... ...
... ...

would like to see a result set like below.

name age sex ...
---- --- ---- -----
rob 30 male ...

Note: the number of key value pairs are unknown.

View 3 Replies


ADVERTISEMENT

Specifying That Encryption Should Not 'rotate The IV

Aug 22, 2007

There has been a great deal of discussion around searching on encrypted columns.

Is there a way to 'disable' the fact that IVs and other info are changed for each set of clear text to be encrypted?

This would introduce a certain level of weakness, I know. but in my mind, security is all abour risk assessment, which includes the cost of implementing security.

To me, the cost of not being able to search on an encrypted string is higher than mitigating against the chance that someone could brute force decrypt AES 256 - if this makes sense.

Thanks,

...Andrew

View 1 Replies View Related

Rotate Single Row Into Two (key, Value) Columns

Jan 30, 2007

 

Hi,

How can I convert this results :





col 1

col 2

col 3

col 4

col 5

col 6

col 7




val 1

val 2

val 3

val 4

val 5

val 6

val 7



into this






Col 1

val 1




Col 2

val 2




Col 3

val 3




Col 4

val 4




Col 5

val 5




Col 6

val 6




Col 7

val 7

View 6 Replies View Related

Rotate SQL Server Tables

Feb 3, 2003

Is there a way to rotate db tables - i.e. to pivot them?

Thanks,

Bianca

View 2 Replies View Related

Rotate View - Show Result With 3 Columns In 1 Row

Jan 19, 2012

I have a view with 2 columns and 2 rows(No 1). I want to show the result with 3 columns in 1 row(No 2).

No1:
The view result :
ID | SubjectID
-- ---------
13279 | 900
13279 | 910

No2:
I want to show that result in this structure :
ID | SubjectID | SubjectID2
-- --------- ----------
13279 | 900 | 910

View 1 Replies View Related

Reporting Services :: Rotate Textbox 45 Degrees

Apr 3, 2012

We want to rotate the textbox 45 degrees. When I use properties/writing mode, change it to "Rotate270", the normal textbox "This is not"

becomes the following

But we want to rotate it like below, is there a way to do this in BIDS? I found this thread but not working

[URL] ...

View 5 Replies View Related

Rotate Text To Flow Vertically Instead Of Horizontally

Aug 23, 2007

Is it possible in the SSRS Report Designer to rotate a textbox to run vertically, or simply to rotate the text in a textbox ? I have only seen this done within axes lables of charts, but not text boxes.

Thanks in advance,
Kenny

View 1 Replies View Related

Reporting Services :: How To Rotate Text 180 Degrees Without Using Images

Oct 13, 2011

I'm currently working on a report and have all the requirements taken care of save one. I need to flip my text 180 degrees. I have seen how to do this by making an image on the fly and then rotating the image, etc. And that is what we previously had in place.

Unfortunately the reports are getting so large (20 images on a page, 150 pages for the report) that the reports will not print in their entirety through Citrix and cuts off after about 120 pages.

I also tried using upside down fonts which won't work as they flip the letter on a X axis as opposed to rotating them along a pivot. Sadly we can't reduce the number of occurrences per page or decrease the page count. So those are not options. They were the first things I asked about.

View 6 Replies View Related

Reporting Services :: Axis-X Labels Rotate 90° Doesn't Work

Jun 14, 2012

i would like to show all Labels available in a Chart and rotate the Labels 90°. How can i do that ? I changed the Propertie "Interval" to 1, "LabelsAngle" to 90, "LabelsAutoFitDisabled" to true in my Chart Axis.

View 12 Replies View Related

Reporting Services :: Rotate Text Box Instead Of Text In The Box?

Jul 21, 2015

I need to rotate text box instead of text in the box. how do we achieve this in SSRS.

View 2 Replies View Related

The OLE DB Provider MSDAORA For Linked Server .... Does Not Contain The Table COUNTRY. The Table Either Does Not Exist Or The Current User Does Not Have Permissions On That Table.

Jun 13, 2006

I am using SQL Server 2005 and trying to create a linked server on Oracle 10. I used the commands below:
EXEC sp_addlinkedserver
@server = 'test1',
@srvproduct = 'Oracle',
@provider = 'MSDAORA',
@datasrc = 'testsource'
exec sp_addlinkedsrvlogin
@rmtsrvname = 'test1',
@useself = 'false',
@rmtuser='sp',
@rmtpassword='sp'
 
When I execute
select * from test1...COUNTRY
I get the error. "The OLE DB provider "MSDAORA" for linked server "...." does not contain the table "COUNTRY". The table either does not exist or the current user does not have permissions on that table."
The 'sp' user I am connecting is the owner of the table. What could be the problem ?
Thanks a lot.

View 3 Replies View Related

I Have Created A Table Table With Name As Varchar And Id As Int. Now I Have Started Inserting The Rows Like, Insert Into Table Values ('arun',20).

Jan 31, 2008

I have created a table Table with name as Varchar and id as int. Now i have started inserting the rows like, insert into Table values ('arun',20).Yes i have inserted a row in the table. Now i have got the values " arun's ", 50.                 insert into Table values('arun's',20)  My sqlserver is giving me an error instead of inserting the row. How will you solve this problem? 
 

View 3 Replies View Related

Moving From One Table To Other Table Automatically For Every 3 Months By Checking The Paticular Value Of The Table Field

Mar 29, 2007

Hi
 
I am having a table called as status ,in that table one field is there i.e. currentstatus.
the rows which are having currentstatus as "ticket closed",i want to move those rows into  other table called repository which is having same table structure as status table.
I can do programatically.
but is there any way for every 3 months system has to check and do this action means moving to repository table automatically?
 
Please help me.
 
Thanks.

View 1 Replies View Related

SQL Server 2008 :: Insert From Table 1 To Table 2 Only If Record Doesn't Exist In Table 2?

Jul 24, 2015

I'm inserting from TempAccrual to VacationAccrual . It works nicely, however if I run this script again it will insert the same values again in VacationAccrual. How do I block that? IF there is a small change in one of the column in TempAccrual then allow insert. Here is my query

INSERT INTO vacationaccrual
(empno,
accrued_vacation,
accrued_sick_effective_date,
accrued_sick,
import_date)

[Code] ....

View 4 Replies View Related

Default Table Owner Using CREATE TABLE, INSERT, SELECT && DROP TABLE

Nov 21, 2006

For reasons that are not relevant (though I explain them below *), Iwant, for all my users whatever privelige level, an SP which createsand inserts into a temporary table and then another SP which reads anddrops the same temporary table.My users are not able to create dbo tables (eg dbo.tblTest), but arepermitted to create tables under their own user (eg MyUser.tblTest). Ihave found that I can achieve my aim by using code like this . . .SET @SQL = 'CREATE TABLE ' + @MyUserName + '.' + 'tblTest(tstIDDATETIME)'EXEC (@SQL)SET @SQL = 'INSERT INTO ' + @MyUserName + '.' + 'tblTest(tstID) VALUES(GETDATE())'EXEC (@SQL)This becomes exceptionally cumbersome for the complex INSERT & SELECTcode. I'm looking for a simpler way.Simplified down, I am looking for something like this . . .CREATE PROCEDURE dbo.TestInsert ASCREATE TABLE tblTest(tstID DATETIME)INSERT INTO tblTest(tstID) VALUES(GETDATE())GOCREATE PROCEDURE dbo.TestSelect ASSELECT * FROM tblTestDROP TABLE tblTestIn the above example, if the SPs are owned by dbo (as above), CREATETABLE & DROP TABLE use MyUser.tblTest while INSERT & SELECT usedbo.tblTest.If the SPs are owned by the user (eg MyUser.TestInsert), it workscorrectly (MyUser.tblTest is used throughout) but I would have to havea pair of SPs for each user.* I have MS Access ADP front end linked to a SQL Server database. Forreports with complex datasets, it times out. Therefore it suit mypurposes to create a temporary table first and then to open the reportbased on that temporary table.

View 6 Replies View Related

Dbo.Table Of A Database In The .SQLEXPRESS Object Explorer: How To Copy The Dbo.Table To The Another Blank Dbo.Table?

Jan 9, 2008

Hi all,

The following dbo.Tables of Northwind.mdf in my .SQLEXPRESS (SQL Server Management Studio Express) are missing:
dbo.Categories
dbo.CustomerCustomerDemo
dbo.CustomerDemographics
dbo.Customers
dbo.Employees
dbo.EmployeeTerritories
dbo.Order Details
dbo.Orders
dbo.Products
dbo.Regions
dbo.Shippers
dbo.Suppliers
dbo.Territories.

But, I have these dbo.Tables in a different Database "xyzDatabase". How can I copy each of these dbo.Tables to the another blank dbo.Table of Northwind Database?

I right clicked on the dbo.Categories and I saw the following thing:
dbo.Categories
New Table...
Modify
Open Table
Script Table as |> CREATYE To |>
DROP To |>
SELECT To |>
INSERT To |> New Query Editor Window
File....
Clipboard
UPDATE To |>
DELETE to |>
From the above observation,I think it is possible to copy the dbo.Table from the one Database to the Northwind Database that needs to be repaired. Please help and advise me how to do this task or tell me where I can find the Microsoft document that gives the details of this X-copy thing.

Thanks in advance,
Scott Chang

P. S. I am using VB 2005 Express to create a project to learn "Calling Stored Procedures with ADO.NET" (see Paul Kimmel's article in http://www.developer.com/db/article.php/3438221) that needs the dbo.Tables of Northwind Database and my Northwind Database has been screwed up for quite a while and needs a big repair.

View 3 Replies View Related

What Is The Difference Between: A Table Create Using Table Variable And Using # Temporary Table In Stored Procedure

Aug 29, 2007

which is more efficient...which takes less memory...how is the memory allocation done for both the types.

View 1 Replies View Related

Delete Table And Immediately Crate Table, Error Occur Table Already Exist

May 29, 2008

'****************************************************************************

Cmd.CommandText = "Drop Table Raj"



Cmd.ExecuteNonQuery()


Cmd.CommandText = "Select * Into Raj From XXX"



Cmd.ExecuteNonQuery()

'**************************************************************************



This generates error that Table already exist.

If Wait 1 sec then execute statement then it works fine.



Thanks in Advance

Piyush Verma

View 1 Replies View Related

How To Search Multiple Table Which Table Name Is Store In Another Table And Join The Result Together?

Dec 1, 2006

I have one control table to store all related table name
 Table ID                   TableName
     1                           TableA
     2                           TableB
 
In Table A:
RecordID                Value
     1                         1
     2                         2
     3                         3
 
In Table B:
RecordID             Value
    1                         1
    2                         2
    3                         3
 How can I get the result by select the Table list first and then combine the data in table A and table B?
 
Thank you!

View 1 Replies View Related

Stored Procedure To Copy Table 1 To Table 2 Appending The Data To Table 2.

Jan 26, 2006

Just wondering if there is an easy transact statement to copy table 1 to table 2, appending the data in table 2.with SQL2000, thanks.

View 2 Replies View Related

Newbie-DELETE A Record In A Table A That Is Related To Table B, And Table B Related To Table A

Mar 20, 2008

Hi thanks for looking at my question

Using sqlServer management studio 2005

My Tables are something like this:

--Table 1 "Employee"
CREATE TABLE [MyCompany].[Employee](
[EmployeeGID] [int] IDENTITY(1,1) NOT NULL,
[BranchFID] [int] NOT NULL,
[FirstName] [varchar](50) NOT NULL,
[MiddleName] [varchar](50) NOT NULL,
[LastName] [varchar](50) NOT NULL,
CONSTRAINT [PK_Employee] PRIMARY KEY CLUSTERED
(
[EmployeeGID]
)
GO
ALTER TABLE [MyCompany].[Employee]
WITH CHECK ADD CONSTRAINT [FK_Employee_BranchFID]
FOREIGN KEY([BranchFID])
REFERENCES [myCompany].[Branch] ([BranchGID])
GO
ALTER TABLE [MyCompany].[Employee] CHECK CONSTRAINT [FK_Employee_BranchFID]

-- Table 2 "Branch"
CREATE TABLE [Mycompany].[Branch](
[BranchGID] [int] IDENTITY(1,1) NOT NULL,
[BranchName] [varchar](50) NOT NULL,
[City] [varchar](50) NOT NULL,
[ManagerFID] [int] NOT NULL,
CONSTRAINT [PK_Branch] PRIMARY KEY CLUSTERED
(
[BranchGID]
)
GO
ALTER TABLE [MyCompany].[Branch]
WITH CHECK ADD CONSTRAINT [FK_Branch_ManagerFID]
FOREIGN KEY([ManagerFID])
REFERENCES [MyCompany].[Employee] ([EmployeeGID])
GO
ALTER TABLE [MyCompany].[Branch]
CHECK CONSTRAINT [FK_Branch_ManagerFID]

--Foreign IDs = FID
--generated IDs = GID
Then I try a simple single row DELETE

DELETE FROM MyCompany.Employee
WHERE EmployeeGID= 39

Well this might look like a very basic error:
I get this Error after trying to delete something from Table €œEmployee€?


The DELETE statement conflicted with the
REFERENCE constraint "FK_Branch_ManagerFID".
The conflict occurred in database "MyDatabase",
table "myCompany.Branch", column 'ManagerFID'.

Yes what I€™ve been doing is to deactivate the foreign key constraint, in both tables when performing these kinds of operations, same thing if I try to delete a €œBranch€? entry, basically each entry in €œbranch€? and €œEmployee€? is child of each other which makes things more complicated.

My question is, is there a simple way to overcome this obstacle without having to deactivate the foreign key constraints every time or a good way to prevent this from happening in the first place? Is this when I have to use €œON DELETE CASCADE€? or something?

Thanks

View 8 Replies View Related

Is A Temp Table Or A Table Variable Used In UDF's Returning A Table?

Sep 17, 2007

In a table-valued UDF, does the UDF use a table variable or a temp table to form the resultset returned?
 

View 1 Replies View Related

Difference In Creating Temporary Table By #table And ##table

Nov 29, 2006

Banti writes "IF i create temporary table by using #table and ##table then what is the difference. i found no difference.
pls reply.
first:
create table ##temp
(
name varchar(25),
roll int
)
insert into ##temp values('banti',1)
select * from ##temp
second:
create table #temp
(
name varchar(25),
roll int
)
insert into #temp values('banti',1)
select * from #temp

both works fine , then what is the difference
waiting for ur reply
Banti"

View 1 Replies View Related

T-SQL (SS2K8) :: Date Comparison In Two Table By Returning Nearest Date Of Table A In Table B

Jun 9, 2014

I am having a problem in creating query for this exciting scenario.

Table A

ID ItemQtyCreatedDatetime
W001 CB112014-06-03 20:30:48.000
W002 CB112014-06-04 01:30:48.000

Table B

IDItemQtyCreatedDatetime
A001 CB112014-06-03 19:05:48.000
A002 CB112014-06-03 20:05:48.000
A003 CB112014-06-03 21:05:48.000
A004 CB112014-06-04 01:05:48.000
A005 CB112014-06-04 02:05:48.000

I would like to return the nearest date of Table B in my table like for

ID W001 in table B should return ID A002 CreatedDatetime: 2014-06-03 20:05:48.000
ID W002 in table B should return ID A004 CreatedDatetime: 2014-06-04 01:05:48.000

View 3 Replies View Related

How To Create A System Type Table/ Change User Table To System Table.

May 23, 2007

Is there any Posibility to change a User Table to System Table.

How to create one system table.

I am in Big mess that One of the Table I am using is in System Type.

I cant Index the same. Is there any Mistake we can change a user table to system table.....

View 9 Replies View Related

How Do I Enter NULL In A Table Cell In The Enterprise Manager UI For Table Data Entry?

Sep 9, 2005

I have a column defined as smalldatetime. Default length (4), and "allow NULLS" is checked.In the Enterprise Manager UI, when i enter data into that table row, if i just tab past that column, all is well, and the value is represented in the UI as <NULL>.The problem comes once i ever enter a date into that column.  Say i have entered a date (all is well), and now i want to remove that entry and go back to NULL (after the date value has been committed, different entry session, say).How is that done?It seems to me, once a date has ever been entered into that column, now, if i try to remove it, i get the error "The value you entered is not consistant with the data type or length of the column, or over grid buffer limit".  I have tried deleting the value, entering spaces, entering the string NULL or the string <NULL>; maybe some other tries as well, but none works, i always get that error message and am not allowed to proceed past that cell until i restore a date value to it.  I want to get back to <NULL>.Anybody know?Thank you.Tom

View 1 Replies View Related

Transpose Source Data From A System Via Metadata Lookup Table Into Destination Table

Apr 1, 2014

I am stuck on finding a solution to transpose source data from a system via a metadata look-up table into a destination table. I need a method to transpose/pivot the source data into columns (which are by various data-types). The datatypes for each column are listed in a metadata table.

Source Data Table:

Table Name: Source

SrcID AGE City Date
01 32 London 01-01-2013
02 35 Lagos 02-01-2013
03 36 NY 03-01-2013

Metadata Table:

Table Name:Metadata

MetaID Column_Name Column_type
11 AGE col_integer
22 City col_character
33 Date col_date

Destination table:

The source data to be loaded into the destination table(as shown below):

Table Name: Destination

SrcID MetaID col_int col_char col_date
01 11 32 - -
01 22 - London -
01 33 - - 01-01-2013
02 11 35 - -
02 22 - Lagos -
02 33 - - 02-01-2013
03 11 36 - -
03 22 - NY -
03 33 - - 03-01-2013

View 7 Replies View Related

SQL Server 2012 :: Compare Two Table Data And Insert Changed Field To Third Table

Aug 12, 2014

I want Compare two Table data and insert changed field to the third table ...

View 9 Replies View Related

SQL Server 2012 :: Stored Procedures Compiles Even When There Is No CREATE TABLE For A Temp Table

Feb 11, 2015

i am inserting something into the temp table even without creating it before. But this does not give any compilation error. Only when I want to execute the stored procedure I get the error message that there is an invalid temp table. Should this not result in a compilation error rather during the execution time.?

--create the procedure and insert into the temp table without creating it.
--no compilation error.
CREATE PROC testTemp
AS
BEGIN
INSERT INTO #tmp(dt)
SELECT GETDATE()
END

only on calling the proc does this give an execution error

View 3 Replies View Related

SQL Server 2008 :: Capture Sessions Which Modify A Table With Details Modified In Table?

Apr 10, 2015

I created am inventory table with few columns say, Servername, version, patching details, etc

I want a tracking of the table.

Let's say people are asked to modify the base table and I want a complete capture of the details modified and the session of the user ( ) who (system_user) is actually modifying the details.

View 1 Replies View Related

Add Calculated Field In Order Table Based On Price Column In Product Table

Nov 18, 2014

I have 2 tables: Order(ID, Quantity) and Product(ID,Name, Price) and I want to add a calculated field in Order table based on the price column in the Product table. How do i do that?

this query returns the values i want in the table.

select a.quantity * b.price
from tblCustomerPurchases as a
join tblProduct as b
on a.ID=b.ID

View 17 Replies View Related

Snapshot Agent Fails On Table With XML Datatype : Script Failed For Table 'dbo.TableName'

Sep 11, 2007

SQL Server 2005 SP2 Error: Script failed for Table 'dbo.TableName'

I keep getting this error when trying to generate a snapshot for transact replication.
Here is the publishing table schema:

CREATE TABLE [dbo].[viMediaPlaylist](
[MemberID] [bigint] NOT NULL,
[xmlPlaylist] [xml](CONTENT [dbo].[viMediaPlaylistCollectionSchema]) NOT NULL,
PRIMARY KEY CLUSTERED
(
[MemberID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, FILLFACTOR = 90) ON [PRIMARY]
) ON [PRIMARY]


I tried the following:
#1)Create table schema at the subscriber manually, and change package to Keep object as is. Got the same error during snapshot.

#2Filtered replication to NOT include XML column. This worked, and no error was generated, replication was up and running.


So my question is, what is the problem with XML column being replicated?
Any ideas how i can make this work? At this point i'm not sure what the problem is with the xml column, but it seems like ti tries to run schema script, but i'm not asking it to create the schema i already did it myself. Thanks!

Here is a log dump from the distributor:

2007-09-11 16:40:14.56 SQL Command dump
2007-09-11 16:40:14.56 ================
2007-09-11 16:40:14.56 Server: SQL02
2007-09-11 16:40:14.56 Database: Video
2007-09-11 16:40:14.56 Command Text: sys.sp_releaseapplock
2007-09-11 16:40:14.56 Parameters:
2007-09-11 16:40:14.56 @Resource = SQL02-Video_viMediaPlaylis-71
2007-09-11 16:40:14.56 @LockOwner = Session
2007-09-11 16:40:14.56 @DbPrincipal = db_owner
2007-09-11 16:40:15.17 [0%] The replication agent had encountered an exception.
2007-09-11 16:40:15.17 Source: Unknown
2007-09-11 16:40:15.17 Exception Type: Microsoft.SqlServer.Management.Smo.FailedOperationException
2007-09-11 16:40:15.17 Exception Message: Script failed for Table 'dbo.viMediaPlaylist'.
2007-09-11 16:40:15.17 Message Code: Not Applicable
2007-09-11 16:40:15.17
2007-09-11 16:40:15.17 Call Stack:
2007-09-11 16:40:15.17 Microsoft.SqlServer.Management.Smo.FailedOperationException: Script failed for Table 'dbo.viMediaPlaylist'. ---> Microsoft.SqlServer.Management.Smo.UnsupportedVersionException: Either the object or one of its properties is not supported on the target server version.
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.UserDefinedDataType.GetTypeDefinitionScript(ScriptingOptions so, SqlSmoObject oObj, String sTypeNameProperty, Boolean bSquareBraketsForNative)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.UserDefinedDataType.AppendScriptTypeDefinition(StringBuilder sb, ScriptingOptions so, SqlSmoObject oObj, SqlDataType sqlDataType)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Column.ScriptDdlCreateImpl(StringBuilder sb, ScriptingOptions so)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Column.ScriptDdl(StringCollection queries, ScriptingOptions so)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Table.ScriptTableInternal(ScriptingOptions so, StringBuilder sb, ColumnCollection columns, IndexCollection indexes)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Table.GetTableCreationScript(ScriptingOptions so, StringBuilder sb)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Table.ScriptCreate(StringCollection queries, ScriptingOptions so)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Scripter.ScriptWithListWorker(DependencyCollection depList, SqlSmoObject[] objects)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Scripter.ScriptWithList(DependencyCollection depList, SqlSmoObject[] objects)
2007-09-11 16:40:15.17 --- End of inner exception stack trace ---
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Scripter.ScriptWithList(DependencyCollection depList, SqlSmoObject[] objects)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Scripter.ScriptWithList(SqlSmoObject[] objects)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.Snapshot.TransSmoScriptingManager.GenerateLogBasedArticleSchScript(Scripter scripter, BaseArticleWrapper articleWrapper, Table smoTable)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.Snapshot.TransSmoScriptingManager.GenerateLogBasedArticleScripts(ArticleScriptingBundle articleScriptingBundle)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.Snapshot.TransSmoScriptingManager.GenerateArticleScripts(ArticleScriptingBundle articleScriptingBundle)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.Snapshot.SmoScriptingManager.GenerateObjectScripts(ArticleScriptingBundle articleScriptingBundle)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.Snapshot.SmoScriptingManager.DoScripting()
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.DoScripting()
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.GenerateSnapshot()
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.SnapshotGenerationAgent.InternalRun()
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.AgentCore.Run()

View 6 Replies View Related

SSIS Loading DWH Staging Area When Table Names Is Selected From Table List

Aug 31, 2007

Hello,
Maybe anyone have done that before?
I have table where i store SOURCE_TABLE_NAME and DESTINATION_TABLE_NAME, there is about 120+ tables.
i need make SSIS package which selects SOURCE_TABLE_NAME from source ole db, and loads it to DESTINATION_TABLE_NAME in destination ole db.

I made such SSIS package. set ole db source data access mode to table or view name variable.
set ole db destination data access mode to table or view name variable. set to variables defoult values (names of existing tables)
but when i loop table names is changed, it reports error, that can map columns, becouse in new tables is different columns.

how to solve that problem?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved