following is the base table
create table #sample (id int , value varchar(100))
insert into #sample values (1,'aaa,bbb')
insert into #sample values (2,'ccc,ddd')
insert into #sample values (3,'aab')
& i need the attached output
I have been trying to separate firstname,last name,middle from name column
Existing Format
Column Name =FIRST,LAST M
Desired
First
Last
M
I would llike to divide one column into three columns...How can i achieve it..
Please let me know
I've a table that has salescode(124!080) and salesamount(125.65!19.25) and I need to split the columns. Salesman(124) has commission(125.65). Here is the DDL:
USE tempdb;
GO
DECLARE @TEST_DATA TABLE
(
DT_ID INT IDENTITY(1,1) NOT NULL PRIMARY KEY CLUSTERED
, InvNoVARCHAR(10) NOT NULL
, SalesCode NCHAR(80) NOT NULL
[code]....
I have a column with the following information in it. I need to split the column and parse the values. I have Parsed one single values from but, not multiple times.
<TV<MR1#4.0#true#2.0#USD>VT>,<TV<MR2#3.0#true#1.5#USD>VT>,<TV<MR3#0.0#true#0.0#USD>VT>,<TV<MR4#0.375#true#0.19#USD>VT>
MR1 -Model Code,
4.0 - Percentage,
true - isAbs,
2.0 - AppliedValue --> This is Actual amount applied as tax.
USD - Currency
For the example provide , the totalTaxValue would be 2.0 + 1.5+0.0+0.19 = 3.69
I've a table that has salescode(124!080) and salesamount(125.65!19.25) and I need to split the columns. Salesman(124) has commission(125.65). Here is the DDL:
USE tempdb;
GO
DECLARE @TEST_DATA TABLE
(
DT_ID INT IDENTITY(1,1) NOT NULL PRIMARY KEY CLUSTERED
, InvNoVARCHAR(10) NOT NULL
, SalesCode NCHAR(80) NOT NULL
, Amount NCHAR(80) NOT NULL
[code]....
I need to split the amount equally into 12 months from Jan 2015 through Dec 2015.There is no date column in the table and the total amount has to be splitted equally.Guess I can't use Pivot here because the date column is not there ...How can I achieve this ?
CREATE TABLE #tbl_data (
Region Varchar(25),
Amount FLOAT,
[code]...
Hi,
I have data like this in my table:
AppId Gender
1 x
2 y
3 x, y
4 x, y, z
I need to transform like this:
AppID Gender
1 x
2 y
3 x
3 y
4 x
4 y
4 z
How to do this?
Thanks in advance
I have an empty employee table and employee_details table. The temp table which i created say it has 10 columns of which 6 are from employees and 4 from employee_details. I have loaded some data into temp table say 10 rows.
Now the stored procedure using cursor should be created such that, it should fetch the rows one by one from temp table and insert the values into employee table(6 columns) and the rest in employee_details table(4 columns).
This is the scenario.
Here is the column names of my temp table
CREATE TABLE [dbo].[temp](
[employee_id] [char](7) NOT NULL,
[first_name] [char](50) NOT NULL,
[middle_name] [char](50) NOT NULL,
[last_name] [char](50) NOT NULL,
[title] [char](5) NOT NULL,
[Code] ....
Here the last 4 columns belong to the employee_details table. The stored procedure should fetch record by record from temp split and insert into employee and employee_details table.
I have an requirement where i need to show Employee Table and CustomerMeta Table joins In CustomerMeta Table (CustID)
Reference to Employee Table and Metavalues table Metavalues table is like master table.
In Application i will get multiple select box selection (DrivingLicense,Passport etc;) so that data will be inserted in comma(',') separated values So in my desired output i need to show as i need to show split those comma separated and for every MetaTypeID MetaTypeName as a row as showed in desired output
Metavalues table :
MetaID Metavaluedescription
1 Driving License
2 Passport
3 AadharCard
4 EducationalProof
5 ResidentialProof
CustomerMeta Table :
CustID MetaTypeID MetaTypeName
2 1,2,3,4,5 DrivingLicense,Passport,AadharCard,EducationalProof,ResidentialProof
3 1,2,3DrivingLicense,Passport,AadharCard
Employee Table
EmpID CustID EmPname
1001 2Mohan
1002 3 ramu
Desired OutPut :
EMPID CustID EmPname MetaTypeID MetaTypeName
1001 2 Mohan 1 Driving License
1001 2 Mohan 2 Passport
1001 2 Mohan 3 AadharCard
1001 2 Mohan 4 EducationalProof
1001 2 Mohan 5 ResidentialProof
1002 3 ramu 1 Driving License
1002 3 ramu 2 Passport
1002 3 ramu 3 AadharCard
SQL syntax to split a column that contains ntext values that are separated with this value : ;#
I need it to create 3 new columns
i.e.: I have a column that contains values such as:
ROW1: ;#typea;#typeb;#typec;#typed;#
ROW2: ;#typeb;#typec;#
ROW3: ;#typeb;#
I need it to convert to 3 new columns and strip out the ;#:
E.g.:
Column 1
typea
typeb
typeb
Column 2
typeb
typec
blank
I have a stored procedure that is passed two values. Both are strings representations of GUID values, the first is a single value, the second is a comma delimited string of values.In the stored procedure I call a split function to separate the comma delimited values into a table and this is used in my WHERE clause to filter my select results.This is an example:
Code:
SELECT
item.uiGUID as ItemGUID,
stores.strStoreName as Store,
location.strLocationName as Location
FROM tblItems as item
INNER JOIN tblStoreLocations as location
ON item.uiLocationGUID = location.uiGUID
INNER JOIN tblStores as stores
ON location.uiStoreGUID = stores.uiGUID
WHERE CAST(item.uiGUID as varchar(36)) IN (SELECT Value FROM dbo.Split(',',@ItemGUIDList))
When I run this query in the management studio, passing a list of 5 values in the second parameter, my results include one item for each of the 5 values. However, when I pass the parameters from my ASP project, (I've verified the values I think are being passed are indeed being passed), I only get one item.I believe the error is in my split function. Both split functions return the same results in the SQL management studio, but only one returns the correct results in the the ASP project.
When I use this version of the function it returns the correct table values to the calling application, but it chokes when the item list does not have a trailing comma. I figure that to be a bug in the SQL function.
Code:
CREATE FUNCTION [dbo].[Split]
( @Delimiter varchar(5),
@List varchar(8000)
)
RETURNS @TableOfValues table
( RowID smallint IDENTITY(1,1),
[Value] varchar(50)
[code]....
I need to split NUMERIC & ALPHABETICAL values from string.
for eg :-
1234heaven56-guy
output
123456 heaven-guy
I have the table as
|start || end1 |
1/06/2015 1:00 || 1/06/2015 1:30
1/06/2015 2:00 || 1/06/2015 3:00
1/06/2015 3:20 || 1/06/2015 4:00
1/06/2015 4:00 || NULL
I want the output as : -
|start || end1 |
1/06/2015 1:00 || 1/06/2015 1:30
1/06/2015 1:30 || 1/06/2015 2:00
1/06/2015 2:00 || 1/06/2015 3:00
1/06/2015 3:00 || 1/06/2015 3:20
1/06/2015 3:20 || 1/06/2015 4:00
1/06/2015 4:00 || NULL
I am trying the below mentioned code but it is not giving me the desired output..
with cte as
(select
start
,end1
,ROW_NUMBER() over (order by (select 1)) as rn
[Code] .....
I am getting wrong output as -
| start || end1 |
1/06/2015 1:00 || 1/06/2015 1:30
1/06/2015 1:30 || 1/06/2015 2:00
1/06/2015 2:00 || 1/06/2015 4:00
1/06/2015 4:00 || 1/06/2015 4:00
I have a field 'IsActive' which is bit type either 1 or 0. And in my package, the conditional split must be set something like
IsActive==0
And throws exception that condition evaluated as NULL where Boolean was expected. How i can make this work?
I was to split each record into multiple columns. The problem is some records need to be split into only 1 column, others may need to be split into more. Also need to remove the "/"'s. This is all dependent on where a "/" is found. Been beating my head for a while and getting nowhere.
So:
create table #foo (myPK int, c1 nvarchar(425))
insert into #foo values (1,'/folder1')
insert into #foo values (2,'/lvl1/folder2')
insert into #foo values (3,'/folder1/lvl2/folder3')
insert into #foo values (4,'/f1/folder2/lvl3/fldr4')
Should return as:
folder1
lvl1
folder2
folder1
lvl2
folder3
f1
folder2
lvl3
fldr4
I have a table that has the following structure:
EntryID int,
Categories varchar(200)
values look like:
541,'A,B,C'
345,'B,C'
234,'A,C'
657,'D,E'
435,'D'
what I want to do is extract the Categories column to a normalized separate table:
541,'A'
541,'B'
541,'C'
345,'B' ....
I found the split using the tally table useful to split one-by-one, but how can it be applied when you are referring to a table?
I have a comma separated field containing numerous 2 digit numbers that I would like splitting out by a corresponding unique code held in another field on the same row.
E.g
Unique Code Comma Separated Field
14587934 1,5,17,18,19,40,51,62,70
6998468 10,45,62,18,19
79585264 1,5,18
These needs to be in column format or held in an array to be used as conditional criteria.
Unique Code Comma Separated Value
79585264 1
79585264 5
79585264 18
How to count the number of values that exist in a row based on the values from an array of numbers. Basically the the array of numbers I want to look for are in row 1 of table [test 1] and I want to search for them and count the "out of" in table [test 2]. Excuse me for not using the easiest way to convey my question below. I guess in short I have 10 numbers and like to find how many of those numbers exist in each row. short example:
Table Name: test1
Columns: m1 (int), m2 (int), m3 (int) >>> etc
Array/Row1: 1 2 3 4 5 6 7 8 9 10
------
Table Name: test2
Columns: n1 (int), n2 (int), n3 (int), n4 (int), n5 (int)
Row 1: 3, 8, 18, 77, 12
Row 2: 1, 4, 5, 7,18, 21
Row 3: 2, 4, 6, 8, 10
Answer: 2 out of 5
Answer: 4 out of 5
Answer: 5 out of 5
Hello all,
I am trying to think my way through a solution which I believe others have probably come across... I am trying to implement a matching routine wherein I need to match an address against a high value and a low value (or, for that matter an input date vs. a start and end date) to return the desired row ... i.e. if I were to use a straight vb program I would just use the following lookup:
"SELECT DISTINCT fire_id, police_ID, fire_opt_in_out, police_opt_in_out FROM ipt_tbl " & _
" WHERE zip_code = @zip_code AND addr_prim_lo <= @street_number AND addr_prim_hi >= @street_number " & _
" AND addr_prim_oe = @addr_prim_oe AND street_pre = @street_pre AND street_name = @street_name " & _
" AND street_suff = @street_suff AND street_post = @street_post " & _
" AND (expiry_date = '' OR expiry_date = '00000000' OR expiry_date > @expiry_date)" & _
" GROUP BY fire_ID, police_ID, fire_opt_in_out, police_opt_in_out"
My question, then, is how would you perform this type of query using a lookup / merge join or script? I have not found a way to implement a way to set the input columns? I can set the straight matches without a problem, i.e. lookup zip code = input zip code, but can't think of the correct way to set comparisons, i.e. lookup value 1 <= input value AND lookup value 2 >= input value
Any suggestions?
thanks for your time...
I have a DTSX package which reads values from a fixed-length text file using a data reader and writes some of the column values from the file to an Oracle table. We have used this DTSX several times without incident but recently the process started inserting NULL values for some of the columns when there was a valid value in the source file. If we extract some of the rows from the source file into a smaller file (i.e 10 rows which incorrectly returned NULLs) and run them through the same package they write the correct values to the table, but running the complete file again results in the NULL values error. As well, if we rerun the same file multiple times the incidence of NULL values varies slightly and does not always seem to impact the same rows. I tried outputting data to a log file to see if I can determine what happens and no error messages are returned but it seems to be the case that the NULL values occur after pulling in the data via a Data Reader. Has anyone seen anything like this before or does anyone have a suggestion on how to try and get some additional debugging information around this error?
View 12 Replies View RelatedI am working with a data set containing several years' of monetary values. I have entries for past dates and the associated values, and I also have entries for future dates. I need to populate the values of the future date records with the values from the same date the previous year. Is there any way this can be done in Power Pivot?
View 6 Replies View RelatedI have a string variable
string str1="1,2,3,4,5";
I have to use the above comma separated values into a SQL Search query whose datatype is integer. How would i do this Search query in the IN Operator of SQL Server. My query is :
declare @id varchar(50)
set @id= '3,4,6,7'
set @id=(select replace(@id,'''',''))-- in below select query Id is of Integer datatype
select *from ehsservice where id in(@id)
But this query throws following error message:
Conversion failed when converting the varchar value '3,4,6,7' to data type int.
I have my stored procedure set to
Territory_code IN (@Territory)
, now , how do i enter in more then one value. When i select the multi value check box, it gives me more spaces. But then doesnt recognize the values when i put in more then one. am i doing something wrong?
The field is a Varchar 20
Hi All,
I receive the input file with some 100 columns and some 20k+ rows and I want to check the incoming input row is existed in the database or not based on 2 key columns. If the row is existed then I need to check all the columns (nearly 100 columns) values in input and the database are equal or not. If both are equal I need to treat them seperately if not there is a seperate logic. How Can I do that check for each row and for each column?
Basically the algorithm is like this, if the input file row is not existed in the database then treat that as new row else if the input row is existed in the database then check all the columns are equal or not. If all the columns are equal then treat that as existing row and do nothing else if some columns are not equal then treat this row seperately.
I found some thing to achieve the above thing.
1. Take the input row and check in the database.
2. If the row is not found in the database then treat it as new row.
3. If row is found in the database then
a) Take the source row and prepare a concatenated string for all the columns
b) Take the database row and prepare a concatenated string for all the columns
c) Find out the hash code for the 2 strings and then compare hash codes for equal.
The disadvantage of this is running a loop 2*m*n times where m is the number of rows and n is the number of columns. It should be done 2 times for input file row and database row.
Can anybody suggest a good method to do this?
What does the function "GetHashCode" for InputBuffer in method "Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)" will do?
Will it generates hash code based on all the columns values?
Pls clarify.
Regards
Venkat.
I have a situation in SSRS to get the common values between the two columns where the values are sorted comma separated as below.Ex:
ColumnA : abc,cde,efg
ColumnB : cde,xyz,abc
the result in
ColumnC : cde,abc
similarly Column A and B will have n number records. I need to right an expression or the Code function to get the required result in ColumnC. I am using SharePoint Lists as Datasource. Cannot write SQL query to achieve this requirement.
I am SSRS user, We have a .net UI from where we want to pass multi select values, but these values are comma separated in the database. how can I write a sql query such that when I select multi values on my UI, the comma separated values are take care of.
View 5 Replies View RelatedI've got some records like this:
ID_________Jan Feb...........................Dec
0000030257 0 0 0 0 0 0 1 1 1 1 1 0
where each month field has a 0 or 1, depending on if the person was enrolled that month.
I'm being asked to generate a table like this:
ID_________ Start_Date End_Date
0000030257 July 1, 2014 Nov 30, 2014
Is there some slam dunk way to do this without a bunch of If/Then statements?
The editor compressed all my space fields, so the column headers are off in some places.
I have a script that I use after some amount of data massaging (not shown). I would like to be able to change the
1) denominator value (the value 8 in line 32 of my code) based on how many columns are selected by the where clause:
where left(CapNumber,charindex('_', CapNumber)-1) = 1where capNumber is a value like [1_1], [1_4], [1_6]...[1_9] capNumber can be any values from [1_1]...[14_10] depending upon the specialty value (example: Allergy) and the final number after the equal sign is a number from 1 to 14)
2) I'd like to dynamically determine the series depending upon which values correspond to the specialty and run for each where: left(CapNumber,charindex('_', CapNumber)-1) = n. n is a number between 1 and 14.
3) finally I'd like to dynamically determine the columns in line 31 (4th line from the bottom)
If I do it by hand it's 23 * 14 separate runs to get separate results for each CapNumber series within specialty. The capNumber series is like [1_1], [1_2], [1_3],[1_4], [1_5], [1_6], [1_7], [1_8],[1_9]
...
[8_4],[8_7]
...
[14_1], [14_2],...[14_10]
etc.
Again, the series are usually discontinuous and specific to each specialty.
Here's the portion of the script (it's at the end) that I'm talking about:
--change values in square brackets below for each specialty as needed and change the denom number in the very last query.
if object_id('tempdb..#tempAllergy') is not null
drop table #tempAllergy
select *
into #tempAllergy
from
dbo.#temp2 T
[Code] ....
If I were to do it manually I'd uncomment each series line in turn and comment the one I just ran.
I have a table that lists math Calculations with "User Friendly Names" that look like the following:
([Sales Units]*[AUR])
([Comp Sales Units]*[Comp AUR])
I need to replace all the "User Friendly Names" with "System Names" in the calculations, i.e., I need "Sales Units" to be replaced with "cSalesUnits", "AUR" replaced with "cAUR", "Comp Sales Units" with "cCompSalesUnits", and "Comp AUR" with "cCompAUR". (It isn't always as easy as removing spaces and added 'c' to the beginning of the string...)
The new formulas need to look like the following:
([cSalesUnits]*[cAUR])
([cCompSalesUnits]*[cCompAUR])
I have created a CTE of all the "Look-up" values, and have tried all kinds of joins, and other functions to achieve this, but so far nothing has quite worked.
How can I accomplish this?
Here is some SQL for set up. There are over 500 formulas that need updating with over 400 different "look up" possibilities, so hard coding something isn't really an option.
DECLARE @Synonyms TABLE
(
UserFriendlyName VARCHAR(128)
, SystemNames VARCHAR(128)
)
INSERT INTO @Synonyms
( UserFriendlyName, SystemNames )
[Code] .....
I am working with SP. How can we find out values of parameters when the SP is executed with the default values?
View 9 Replies View Related[RS 2005]
Given the starting and stopping points (time values), how do I generate values between these points.
For example, if I have 08 (representing Hour) as a starting point and 12 as a stopping point.
From this I would like to generate a data sequence like 08, 09, 10, 11, and 12.
So how do I accomplish this? In SQL or in the RS?
The only thing I can think of is using a WHILE loop and a temporary table in SQL (not to keen on doing this).
//Håkan
I developed the following T-SQL query that runs successfully, but I was looking for a more efficient and concise way to do this. Is there a CTE that can replace all of these case statements? I've updated my query as below. Although this sample query works, it's not working for my real data. Instead, I get an error. At the bottom is the error part of my real query.I copied all of the tables from the first query block below. But when I wrote the bottom query block, it underlined in red the words "answer" and "question." It says "Invalid column name".
if exists (select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#hard_values')
) DROP TABLE #hard_values;
if exists (select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#dummy_data')
) DROP TABLE #dummy_data;
if exists (select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#temp')
[code]...
Hi
I have one problem in SSIS for passing Variable Values while executing Package. I'm giving in details as below:
I opened Microsoft SQL Server Management Studio
Made Connection to Integration Services
To Execute Package I Right Clicked and Click on Run Package
Then I Clicked on Execute and package was executed successfully.
Problem is that if I try to Set Values then Package through Error
DTExec: Could not set ProcessMode value to M.
Basically I could not understand in which format I should pass the Variables.
What I tried is listed below:
ProcessMode;M
Package.Variables[User:rocessMode].Value;M
Package.Variables[ProcessMode].Value;M
But every time I got errors.
And then I tried from Command Line
DTEXEC /DTS "MSDBLoad_Order" /SERVER SERVERNAME /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V /SET Package.Variables[ProcessMode].Value;M
First time Process run successfully. And it has changed the ProcessMode to M also. But after that it was also not changing the ProcessMode Value to M.
Please help in regarding. I tried a lot from Site examples also, but could not get proper solution.
Thanks in advance
Bhudev