i have a catalog and add directory which has 10,000 documents and all are index but if i add 1000 documents to that directory and i don't want those 1000 documents to be indexed. i want only previous 10,000 index document and don't want to new document to be indexed. is there any way can stop the new document to be indexed, please let me it's bit urgent.
Thanking you in anticipation
Hi,
I have a full text index created on a table with PK, text column and timestamp column. The table has 10 million rows. I tried one time full population and CPU spiked so after couple of hours i stopped full population.
Now since i have a timestamp column in the table I want to do a incremental population.
But when I run a select
SELECT * FROM sys.fulltext_indexes
The incremental_timestamp column is showing value 0x0000000000000000
How do I find how long will it take for incremental population to complete?
Thanks,
Yogesh
Can i write a Stored Procedure so as to enter the data in the tables in bulk. Say we have an application through which we can enter the data in some 4-5 tables. For actual testing we need to have a large amount of data being populated in all these tables and its not feasible to do this through the application in a short time. Is there any way out for such a situation so that we can enter the valid data with different confitions in the tables ?
Thanx,
I am performing a Select Into from a #table into a real table that has a surrogate key. If this is in a transaction (or not in one) am I guaranteed that the records inserted will be sequential surrogate key ids?
Select * into REALTABLE from MYPOUNDTABLE --40 rows
Can I assume that if the first one inserted is id 32 that the last one is 72?
I am performing a Select Into from a #table into a real table that has a surrogate key. If this is in a transaction (or not in one) am I guaranteed that the records inserted will be sequential surrogate key ids?
Select * into REALTABLE from MYPOUNDTABLE --40 rows
Can I assume that if the first one inserted is id 32 that the last one is 72?
I have two DropDownList controls, ddlGroup and ddlLocation.
The contents of ddlLocation will be determined by the selection of ddlGroup. A better explanation is as follows:
ddlGroup =
ADVANCED DEVELOPMENT
DESIGN
HEAD TEST
INK R&D
JETTING
PROCESS
RELIABILITY
The SQL query that shows my logic is:
IF @Group = 'ADVANCED DEVELOPMENT' SELECT Location FROM tblLocations WHERE Location like 'AD%'ELSE IF @Group = 'DESIGN' SELECT Location FROM tblLocations WHERE Location like 'DE%'ELSE IF @Group = 'HEAD TEST' SELECT Location FROM tblLocations WHERE Location like 'HT%'ELSE IF @Group = 'INK R&D' SELECT Location FROM tblLocations WHERE Location like 'INK%'ELSE IF @Group = 'JETTING' SELECT Location FROM tblLocations WHERE Location like 'JT%'ELSE IF @Group = 'PROCESS' SELECT Location FROM tblLocations WHERE Location like 'PR%'ELSE IF @Group = 'RELIABILITY' SELECT Location FROM tblLocations WHERE Location like 'RL%'
I need to define the content of ddlLocation after a selection is made in ddlGroup; how can I accomplish this using Visual Web Developer 2008 Express Edition?
I'm using Full-text in various databases on my servers (SQL2005 on W2K3). On a few databases the Full-text population ends with the error:
'Error '0x80030050' occurred during full-text index population for table or indexed view '[database].[dbo].[table]' (table or indexed view ID '1714105147', database ID '9'), full-text key value 0x00015EE1. Failed to index the row.'
The next log-line lets me know the name of the dll that caused the problem:
The component 'offfilt.dll' reported error while indexing. Component path 'C:WINDOWSsystem32offfilt.dll'.
There's one solution I read about, but that one is not the case here. That sollution states that this problem occurs when de datatype is not the same as the filetype (e.g. datatype is pdf, documenttype is doc).
What can be the problem here?
Thanks.
hello,
I'm looking for a way to populate my index on insertion but not on updates.
I tried each possible value for CHANGE_TRACKING MANUAL|AUTO|OFF and it automatically takes every changes that have been made before in account. is there a way to "flag" the rows that I don't want the server to re-index (i.e. updated rows).
Thanks for reading, any help is welcome.
I want to implement population data in sales cube.
Fact table has customer code which is foreign key of Customer master dimension which in turn is linked to census data dimension. Census data dimension have city wise population data having foreign keys of zone and state.
We want to add population data in fact table.
I have used two matrix in one of my reports. One matrix is right above other. Both matrix's columns are allocated for month name. I.e there are 12 columns for each month of the year for each matrix.
column name of the second matrix was hidden. so end user can see only first matrix column name and corresponding data in each matrix.
But the problem is now, when there is no data for perticular month in first matrix, thats month's column does not appear at all.
Lets say there is no data for November in first matrix. so Novem column is missing in first mtrix now. but still Novem column is shown on the second matrix as it has some data, although column name is not shown. I wonder how I can show all the columns of both matrix regardless of population of data.
Thanks
Hi,
I am working with Naive Bayesian Algorithm and I do not understand why if the original table has 8.000 rcds the size of the entire population shown in Hystogram viewer is only of 2000.
Do you have any answer?
I have been asked to create a report for one of our clients. The report is pretty basic but I am concerned about the overheads with my planned approach.The report is at a table and field grain to include values for:
* Min column value
* Max column value
* Number of discrete values
* Number of populated values (not NULL)
My current plan is to have a cursor over a limited view of sys.tables and sys.columns that will run a dynamic SQL query to import the results into a table that I can then output.There must be a better way of doing this and I don't have access to any DQS services.
Hi! I am new to SQL Server... looking for some veteran assistance.
"Data Integrity Report"
I need a Stored Procedure that takes a table name as a parameter and returns a cursor suitable as a data source for a pre-built Report Services report (I guess Report Services would call the SP?).
The cursor/report needs to have the following columns:
Ordinal_Position (I.E. Column number)
Column_Name
Number Of Blank Rows (how many missing values for this column in this table)
Difference (Between total rowcount and population of this column)
Data_Type
Column_Length (either Character_Maximum_Length or the numeric widths rolled up with COALESCE?)
Sample Data (The contents of the "first" row in the table, based on a TOP(1) and ORDER BY xxx)
The report should look like this (for a table with 100 rows):
Col Num Col Name # Blanks Difference Data Type Col Length Sample Data
1 Name 12 88 varchar 30 Sally Smith
2 Address 34 66 varchar 45 123 Main St Apt 45
3 Acct_ID 0 100 varchar 4 AB12345
Using the "Information_Schema.Columns" I can get everything I need except for #3 (blanks count) and #7 (Sample data).
Is it possible to do this as 1 query, with a CTE or APPLY or something, or do I need to do a table variable based on the Information_Schema and then use dynamic SQL and row-by-row COUNT(*) for each column? And the same for the Sample Data.
Sorry for the long post, and thanks in advance!
John
Hi,
The scenario is the data comes from various sources and its staged into staging database. From this staging database it goes into data warehouse database. Everyday this staging database is truncated and repopulated from various sources.
I've a dimension table called DimCustomers which consists of around 300,000 rows and has lots of different types of SCD columns. It takes around 4-5 hours to load data from staging to this dimension table. Currently I'm using a For Loop container which uses a store proc to extract 15000 rows each time and populate my dimension tables. First couple of loops it goes off quickly but as and when the number reaches half of the count it slows down and hence it takes around 4-5 hours to load data.
What would be the best approach to populate this kind of dimension table.
Thanks
I have a table having 220 lakhs of records and one of the column is Full Text enabled.We have used ContainsTable() to search for data, but we are unable to get results as expected. so we done rebuild.During Index Rebuild, population is failed.I have found this error in error log and it is saying to do resume population.So I want to know how long it takes to complete Resume population process.
look at the below more details about FT Index table.
Row count - 22155112
Index space - 1,903.250 MB (1.9 GB)
Data space - 87,552.258 MB (87 GB)
sqlserver2008 R2
and the below query we have used
HTML Code:
SELECT Distinct top 50 cal.case_id,cal.cas_details
From g_case_action_log cal (READUNCOMMITTED)
inner join containstable(es.g_case_action_log, cas_details,
' ("235355" OR "<br>235355" OR "235355<br> ") ') as key_tbl on cal.log_id = key_tbl.[key]
Where cal.product_id = 38810 ORDER By cal.case_id DESC
This query is not going to search in recent inserted/updated rows. this is the actual issue we are facing.
how to fix this error and if population need to be resume, then how long takes to do resume population.
Error log:
full-text crawl logs for details.
2007-06-01 07:33:55.63 spid25s Error: 7683, Severity: 16, State: 1.
2007-06-01 07:33:55.63 spid25s Errors were encountered during full-text index population for table or indexed view '[XXXX].[dbo].[RECORDS]', database 'XXXX' (table or indexed view ID '738101670', database ID '17'). Please see full-text crawl logs for details.
2007-06-01 07:33:55.63 spid25s Changing the status to MERGE for full-text catalog "XXXX" (21) in database "XXX" (17). This is an informational message only. No user action is required.
This happens for every table that has membership in the full text storage, it is not specific to a database or column type
Scrawl Log:
2007-06-01 07:33:00.57 spid23s Informational: Full-text Full population initialized for table or indexed view '[XXXX].[dbo].[ATTACHMENTS]' (table or indexed view ID '517576882', database ID '17'). Population sub-tasks: 1.
2007-06-01 07:33:36.20 spid23s Error '0x80070003' occurred during full-text index population for table or indexed view '[XXXX].[dbo].[RECORDS]' (table or indexed view ID '738101670', database ID '17'), full-text key value 0x00002B59. Attempt will be made to reindex it.
2007-06-01 07:33:55.63 spid25s Informational: Full-text retry pass of Full population completed for table or indexed view '[XXXX].[dbo].[RECORDS]' (table or indexed view ID '738101670', database ID '17'). Number of retry documents processed: 31899. Number of documents failed: 31899.
2007-06-01 07:33:55.63 spid25s Changing the status to MERGE for full-text catalog "XXXX" (21) in database "XXXX" (17). This is an informational message only. No user action is required.
2007-06-01 07:33:56.59 spid23s Informational: Full-text Auto population initialized for table or indexed view '[XXX].[dbo].[RECORDS]' (table or indexed view ID '738101670', database ID '17'). Population sub-tasks: 1.
Thanks for you feedback.
so async cursor population is supposed to create the cursor and return the cursor id quickly, while the server works on async populating the results. For a keyset-driven cursor, SQL Server stores the key sets in tempdb, which it then uses to fetch data for cursor results. Anyway, this works fine for smaller tables, but I'm finding for large result sets, the async cursor population is very slow and indeed seems to approximate synchronous time. The wait stat I get while it is running (supposedly asynchronously) is TRANSACTION_MUTEX.
Example:
--enable async cursor
exec dbo.sp_configure 'cursor threshold', 0; reconfigure;
declare @cursor int, @stmt nvarchar(max), @scrollopt int, @ccopt int, @rowcount int;
--example of giant result set
set @stmt = 'select * from sys.all_objects o1, sys.all_objects o1';
[code]...
Note that using the SQL "select * from sys.all_objects o1" is much faster than "select * from sys.all_objects o1, sys.all_objects o2". However, if cursor population is async, I'd expect the time to return a cursor id to be similar between the two.
Hi guys,
I am trying to get a result like below without using the cursor.
col1 col2 col3 col4
1111 date uniquenumber 6
1111 date uniquenumber 5
1111 date uniquenumber 4
1111 date uniquenumber 3
1111 date uniquenumber 2
1111 date uniquenumber 1
2222 date uniquenumber 4
2222 date uniquenumber 3
2222 date uniquenumber 2
2222 date uniquenumber 1
3333 date uniquenumber 2
3333 date uniquenumber 1
the column that say unique number is unique and is not duplicated and date column might have duplicates
Please advise whether it is possible to write a query without cursor.
Thanks,
Anu
Hi!
I have a request of having a select statement displaying a list of values in descending order and another column that tells what record it is.
something like this:
id | value | no
4 345 1
7 234 2
2 143 3
9 32 4
3 4 5
...
is this possible?
can it be something like this:
select id, value, increment(1,1) as no from tblTable
order by value desc
thanks.
I am looking to create a incremental value based on the resulting insert that I am using. There already is another field being used as an identity field. I have a beginning value that I just want to add the row number to for the insert.
insert into lineitem select substring(group_id,4,len(ltrim(rtrim(group_id)))-3) as co_code,
0,0,(case when enddate < cast(month(getdate()) as varchar(10))+cast(day(getdate()) as varchar(10))
then 'Prior' else 'Current' end ),
left(acct_type,2) as bene_type, convert(smalldatetime,left(ltrim(rtrim(eff_date)), 8)),
0,trans_amt,0,0,convert(smalldatetime,left(ltrim(r trim(sett_date)),8)),
ltrim(rtrim(b.fname)) + ' ' + ltrim(rtrim(b.lname)) as payee,0,0,a.ssn,'Y',999+count(*),
(case when isnull(b.location,'') = '' then '' else b.location end) as location
from mbi_tran_temp a
left join enrollees b on a.ssn = b.ssn and
ltrim(rtrim(a.group_id)) = ltrim(rtrim(b.mbicode))
The '999+count(*)' is where I would like to have the incremental value.
My Question is of understanding Incremental Backup. How does this work,
Does it go by new files added or activate on file size.
Hi,
Is there any way to maintain history of data while incremental load without using the Slowly changing dimension(SCD) concept?
Hi Friends please let me know how can we incrementally load a destination table with source table. bearing in mind that we need to track that there are no duplicates in the destination table. I need to load only changed or new data in the final load. Please give me some examples also. I am tryin this from last 2 days as I am totally new to SSIS.
View 11 Replies View Relatedhi guys,
I'm a newbie in sql.
anybody know how,
if I want to update incrementally using integration service.
say I have 2 server. we want to took the data from server A and put the data to server B.
but we want just the changes in server A that send to server B.
regards,
-dedys
I have done an bulk upload and I would like to start doing incremental uploads. I just want to upload only the new records that have been added to my data source ( free foxpro tables ). Can anybody point me to an example or info to accomplish this.
Thanks,
Sergio
Dear all,I have an SQL table where I am doing insert from an asp.net web project.I have a primary Key, set to be incremented by 1on each insert.I have another column, Col1 that should be incremented on each insert, How can I do this?I need to have 2 incremental columns? do u have any idea on how to do this?I am doing this right now by calling a select statement in the Add stored procedure on this table, I read the last value of col1 and then I increment it by 1, this work fine on development environement, but when many users are accessing this website, I will have wrong values for col1. Any idea??Thanks.
View 6 Replies View RelatedHi Everybody,
Right now i have a DTS package thats populating a fact table,I'm trying to do an incrmental update of the fact table (which has a sequential#id).
any ideas ,please
Thanks,
Paris
hi,
i need to create two instances of db and transfer incremental uploads from one db to another without having to transfer the entire table of data again and again. how should i go about it? what commands should i use?
thanks in advance
ramya.
Hi All
I have an existing table of students, the school now has decided to give then a General Record No.The table structure is as follows
Students
++++++++++++++
Name
Address
TelNo.
++++++++++++++
I have modified the table as
Students
++++++++++++++
GRN.
Name
Address
TelNo.
++++++++++++++
The data already exists in the table . I just want to add the GRN No. that would be incremental
E.g.
it should be 20060001 for the 1st record
20060002 for the second
The rest data should be as it is
Plz help
Thanks
Hi All
I've created an SSIS package that loads data from source to destination, using Lookup and conditional Split to check New rows and changed rows for one table.
Now I want to take this father by loading data for multible table more that 100. I did it in T-SQL using dynamic sql and cursor.
How can I achive this using SSIS.
I was wondering if there is a way to schedule a tast that will dump afixed width text file of all the new entries in a table. So if I hada table with likeusername - varchar(20)created - smalldatetimeI could get a weekly feed each week of all the new users in a textfile. I know I could write a script that would go through and do thisby looking at the time stamp, and the last time that the filepreviously ran and get the new dates but I was hoping there was abuilt way to do this. Or perhaps a more elegant solution.Thanks,Charlie
View 2 Replies View RelatedHi allNeed your help to do this; I got a table with these records:Supplier RegNo Status PoNumberABC sbh1309m 1DCD sbt99x 1FGJ sbg3939m 1FGJ sbg3939m 1OEE ey3939d 1Need to have a sql command to transform to :Supplier RegNo Status PoNumberABC sbh1309m 1 50001DCD sbt99x 1 50002FGJ sbg3939m 1 50003FGJ sbg3939m 1 50003OEE ey3939d 1 50004Any ideas?Thanks in advance.Rashid.
View 1 Replies View Related
I am attempting to perform an incremental load, inserting new rows and updating existing rows. I am using a lookup and everything works fine, except when it is the first load of the destination table. As there are no records in the table at all, the lookup fails. I thought of using a rowcount - if the count variable is zero load everything from temporary table to load table, otherwise perform lookup and incremental load.
Can anyone help?