How To Use Non-basic AscII Character In Stored Procedure Parameter
Apr 30, 2007
hi all,
I have a stored procedure with a input parameter ( xml block).
sp: spGetAddr @xmlText
the style of parameter @xmlText looks like
<Param RestricBy="UserName IN ('Mayá', 'Bob')"/>
If I use non-basic ASCII character, just like 'á' in the parameter, the execution fails and I get 'The error description is 'An invalid character was found in text content.''
But this kind of special characters should be allowed in the name column of the database table.
If I use the htlm code 'á" to replace 'á' in the parameter, then the execution of the stored procedure is fine. but how can I change all of the possible sepcial characters?
If somebody knows how to handle this issue, please help me. I'm pre-appreciated for all the idea and suggestion!
Thanks,
Jone
View 4 Replies
ADVERTISEMENT
Mar 18, 2008
item custclass totalcustclass
-------------------------
06-5841 INST-CLINPRAC 1
06-5841 INST-MKT/MEDIA 2
06-5841 PROGRAM 1
06-5841 STANDARD 4
06-5845 STANDARD 1
AX-048 INST-MKT/MEDIA 4
KT-048 PROGRAM 2
KT-048 STANDARD 4
i want condition like if item is starting with number then totalcustclass whcih is count(*) remain same giving correct results...but if item startign with ascii character then totalcustclass r getting double so i have to /2..
i want results:
item custclass totalcustclass
-------------------------
06-5841 INST-CLINPRAC 1
06-5841 INST-MKT/MEDIA 2
06-5841 PROGRAM 1
06-5841 STANDARD 4
06-5845 STANDARD 1
AX-048 INST-MKT/MEDIA 2
KT-048 PROGRAM 1
KT-048 STANDARD 2
select
item, custclass,
case when item is <ascii> then count(custclass)/2
else count(custclass)
as totalcustclass
from itemcustclass
can anyone tell me what condition will come in case?
thanks for help.
View 2 Replies
View Related
Jun 19, 2006
Hi,
I'm working on a database conversion from Sybase to SQL Server 2005 and have hit a wall with a character conversion problem when reading non-ASCII characters (encrypted password string) via JDBC.
My application runs on Solaris and accesses a SQL Server 2005 database via the Microsoft JDBC driver. The server was unfortunately specified as having a SQL_Latin1_General_CP1_CI_AS collation at installation time, and the database being accessed has taken this default. After creation the data was migrated across via DTS.
The invalid character is a dagger '†'. When read over JDBC it is converted to a question mark '?'.
In my original environment a Sybase database was accessed via JDBC driver from Solaris and the correct value was returned. The Sybase database used Latin1_General_BIN as it's collation. By way of experimentation I have modified the default collation sequence within the SQL Server 2005 database, and created a new table to hold the password. I am then able to correctly return strings containing this character from within SQL Server Management Studio, but the same problem still exists when accessing it via JDBC.
I am not sure where to focus my investigation and would be grateful for any useful pointers/advice. To me it looks like it's a JDBC driver issue as with the change in collation it works from a non-JDBC client.
Many thanks
Alistair
View 2 Replies
View Related
Feb 11, 2008
I have an issue with some data that has a leading ASCII char 160 (the "a" with the accent mark) but it shows in query results as a space.
... where customername like char(160) + '%'
returns 2 rows but shows the customer name with a leading space. How would I change the collation or do otherwise to get this character to display correctly in the results?
Thanks!
-Dave
View 6 Replies
View Related
Jun 19, 2006
Hi,
I'm working on a database conversion from Sybase to SQL Server 2005 and have hit a wall with a character conversion problem when reading non-ASCII characters (encrypted password) via JDBC.
My application runs on Solaris and accesses a SQL Server 2005 database via the Microsoft JDBC driver. The server was unfortunately specified as having a SQL_Latin1_General_CP1_CI_AS collation at installation time, and the database being accessed has taken this default. After creation the data was migrated across via DTS.
The invalid character is a dagger '€ '. When read over JDBC it is converted to a question mark '?'.
In my original environment a Sybase database was accessed via JDBC driver from Solaris and the correct value was returned. The Sybase database used Latin1_General_BIN as it's collation. By way of experimentation I have modified the default collation sequence within the SQL Server 2005 database, and created a new table to hold the password. I am then able to correctly return strings containing this character from within SQL Server Management Studio, but the same problem still exists when accessing it via JDBC.
I am not sure where to focus my investigation and would be grateful for any useful pointers/advice. To me it looks like it's a JDBC driver issue as with the change in collation it works from a non-JDBC client.
Many thanks
Alistair
View 6 Replies
View Related
Feb 19, 2008
ALTER PROCEDURE dbo.SelectItems (@PRN NVARCHAR(7))AS
SELECT eName AS EName, ePRN, cID, eCC, SUBSTRING(sDate, 7, 2) AS Day, SUBSTRING(sDate, 5, 2) AS Month, SUBSTRING(sDate, 1, 4) AS Year, eLOC, eTel, ePhone, eMobile, less20, over20, q1, inSVmn, inSVyr, inSVRetIns, outSVmn, outSVyr, outSVRetIns, insNo, q2, qper2, qplc2, q3, qper3, qplc3, q4, qper4, qplc4, pic1, pic2, pic3, esigdt, CCHName, CCHTitle, CCHsigdt, username, levent, eventdate, eventtimeFROM iTrns Where ePRN = @PRNRETURN
===
My code behind is
SqlConnection SqlCon = new SqlConnection(System.Configuration.ConfigurationManager.ConnectionStrings["hrdbConnectionString1"].ConnectionString);String SQL = "EXECUTE SelectItems";SqlDataAdapter Adptr = new SqlDataAdapter(SQL, SqlCon);SqlCommandBuilder CB = new SqlCommandBuilder(Adptr);DataSet ds = new DataSet();Adptr.Fill(ds);return ds;SqlCon.Close();
Where I tried to search for PRN by using TextBox it gives me error
Procedure or Function 'SelectItems' expects parameter '@PRN', which was not supplied
I checked the Stored Proc and it was fine. So I guess the problem in the code behind
Any
View 3 Replies
View Related
Sep 9, 2007
Hi.
I need some help with the following sp that I created on a SQL2000 server
CREATE Procedure Users_Authenticate
@account varchar(50),
@password varchar(24)
AS
Select * From Users
Where account = @account
And password = @password
GO
When calling this sp from my app (VS2005) it works fine for most passwords. However it fails if the password contains a plus sign e.g. tXke4572Wd+IbRmjmcGexw==
If I use a View to test this password then the password is split up as 'tXke4572Wd' + 'IbRmjmcGexw=='
I assume that SQL server does the splitting but correct me if I'm wrong.
How can I get this sp to work with passwords containing plus signs (or any other characters).
Cheers,
Frank
View 3 Replies
View Related
Jan 23, 2002
I am working in an access data project. I have a stored procedure that runs fine when I open and run it directly in sql. When I use the DoCmd.OpenStoredProcedure method in VB code, the stored procedure also runs fine (and successfully adds records as it should) but then I
get an error: #7874 "...can't find the
object...'[Name of sp'". This halts the vb code and is a
problem. Here's example code from a sp that causes
this problem:
Insert into Table (Field1, Field2, Field3, Field4)
Select Field1, 'Test', Field5, GetDate()
from View1
I understand there may be another syntax to run a stored procedure from access visual basic other than DoCmd. I would very much appreciate guidance as to how to do this.
Thank you.
View 1 Replies
View Related
Jan 5, 2007
Hi peeps,
I need some help with passing parameters to a stored procedure from my visual basic code.
Unfortunately im a bit of a novice with Visual basic and therefore have very little experience with it.
I have written a stored procedure in VS 2005 which when executed from the server explorer appears to retrieve the results that I require. However I am at a loss for how to actually call this procedure from my visual basic code.
The stored procedure is fairly simple requiring 5 colums from 2 tables. The procedure requires a single parameter to be passed to it.
The code for the procedure is listed below:
/*
Name: usp_display_all_users
Description: Displays activeuser, personid, comment from table: pswds
Userid and sort from table: people
Where the username is like the parameter supplied.
Both tables joined on personid
Author: Iain Blackwood
Modification log: Change
Description Date Changed by
Created proc 02/01/07 Iain Blackwood
*/
ALTER PROCEDURE usp_display_all_users
(
@searchStr nvarchar(128) =''
)
AS
SELECT dbo.pswds.activeuser, dbo.pswds.personid, dbo.people.userid, dbo.people.sort, dbo.pswds.comment
FROM dbo.pswds INNER JOIN
dbo.people ON dbo.pswds.personid = dbo.people.personid
WHERE (dbo.people.sort LIKE @searchStr + '%')
ORDER BY dbo.people.sort
The Visual Basic application I am working on firstly requires login details from the user to build a connection string for the SqlConnection. Once these vaules have been succesfully retrieved the application should display a view with the data returned by the stored procedure (in this case the stored procedure should use the default input parameter value of an empty string to return every row of data from the tables). However I also require that the stored procedure be called if the user enters a search string into the relevant textbox.
I have managed to reproduce the view I require with the following code however this is using SQL commands passed directly to the an SqlDataAdapter and not by calling the Stored procedure that i have written.
Private Sub fillDataGrid()
' I NEED TO:
' 1: Fill the data set with all Accounts
' 2: Diplay the Data to the data grid
' delcare a new SQL connection
sqlCon = New SqlConnection(conStr)
' Delcare and build the SQL Command String: WILL BE REPLACED BY STORED PROCEDURE
Dim comStrPeople As String = "SELECT pswds.activeuser, pswds.personid, userid, sort, pswds.comment"
comStrPeople += " FROM pswds INNER JOIN"
comStrPeople += " people ON pswds.personid = people.personid"
comStrPeople += " ORDER BY sort"
' Display the command string: TEMPOARY
testlbl2.Text = comStrPeople
' Declare a new SQL data adapter
sqlDataAdapter1 = New SqlDataAdapter(comStrPeople, sqlCon)
Try
' Declare a new dataset
sqlDataSet = New DataSet
' fill the sql data adapter with data from dataset: called PeoplePswds
sqlDataAdapter1.Fill(sqlDataSet, "PeoplePswds")
' Fill the forms datagrid view with data from the Dataset table PeoplePswds
DataGrid1.DataSource = sqlDataSet.Tables("PeoplePswds").DefaultView
Catch ex As Exception
' Display suitable error message
MessageBox.Show("Unable to retrieve Account Data at sub fillDataGrid" + ex.Message)
End Try
End Sub
I Guess what im asking for is someone to show / help with how the stored procedure is called from the visual basic code and passed the parameter/s required.
Thanx Flakkie
View 6 Replies
View Related
Jan 29, 2015
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
[Code] ....
View 9 Replies
View Related
Jul 11, 2001
Hi guys,
I'm trying to parse a character string in a stored procedure but I'm not sure how to do it. For example:
-------------------------------
create procedure sp_test (
@fld varchar(1000)
)
AS
???
???
.
.
.
.
----------------------------------
sp_test '123:abc,456:def,789:ghi'
I need to put 123 into a seperate local variable, abc into a local variable, and so on...
What would be the best function to use?
Any help would greatly be appreciated.
- Gary
View 1 Replies
View Related
Feb 19, 2007
Hello,
since a couple of days I'm fighting with RS 2005 and the Stored Procedure.
I have to display the result of a parameterized query and I created a SP that based in the parameter does something:
SET ANSI_NULLS ON
SET QUOTED_IDENTIFIER ON
CREATE PROCEDURE [schema].[spCreateReportTest]
@Name nvarchar(20)= ''
AS
BEGIN
declare @slqSelectQuery nvarchar(MAX);
SET NOCOUNT ON
set @slqSelectQuery = N'SELECT field1,field2,field3 from table'
if (@Name <> '')
begin
set @slqSelectQuery = @slqSelectQuery + ' where field2=''' + @Name + ''''
end
EXEC sp_executesql @slqSelectQuery
end
Inside my business Intelligence Project I created:
-the shared data source with the connection String
- a data set :
CommandType = Stored Procedure
Query String = schema.spCreateReportTest
When I run the Query by mean of the "!" icon, the parameter is Prompted and based on the value I provide the proper result set is displayed.
Now I move to "Layout" and my undertanding is that I have to create a report Paramater which values is passed to the SP's parameter...
So inside"Layout" tab, I added the parameter: Name
allow blank value is checked and is non-queried
the problem is that when I move to Preview -> I set the value into the parameter field automatically created but when I click on "View Report" nothing has been generated!!
What is wrong? What I forgot??
Thankx for any help!
Marina B.
View 3 Replies
View Related
Mar 24, 2008
I have coded a stored procedure to return nearly all of the columns of a single record selected by using a unique key value. The record is in an SQL database, not within an in-memory DataSet. All of the parameters that I wish to have returned to my program are defined as OUTPUT; the two key values are defaulted to INPUT, as there is no need to return them to the calling program. I also have defined the direction of these parameters in the calling SQLDataAdapter function. However, when I run this, the values returned are either the current date for my DateTime parameters, Nothing for my Char parameters or 0's for my integer parameters.
When I try testing the sproc alone, by using the "Step Into Stored Procedure" action in Visual Studio, I get a message in the Debug Output window indicating that parameter @TktClassID was expected and not supplied. This is an OUTPUT parameter, which makes me question why I should be providing any sort of value for it within my VB code. Following are the function definition from my SQLDataAdapter class that calls my sproc, and the sproc itself. I appreciate any help that anyone can provide.
**FUNCTION DEFINITION FROM SQLDataAdapter Class
Public Function Fetch(ByVal ticket As Ticket) As Ticket
Dim connbuilder As New System.Data.SqlClient.SqlConnectionStringBuilder
connbuilder("Data Source") = "ITS-KCGV7VZSQLEXPRESS"
connbuilder("Integrated Security") = "True"
connbuilder("Initial Catalog") = "ITSHelpDesk"
Using conn As New System.Data.SqlClient.SqlConnection(connbuilder.ConnectionString)
Using comm As New System.Data.SqlClient.SqlCommand("dbo.TicketFetch", conn)
conn.Open()
comm.CommandType = CommandType.StoredProcedure
Dim parm As System.Data.SqlClient.SqlParameter
'Add Input parameters (i.e. Key values)
'Add @TicketYear parameter
parm = comm.Parameters.Add("@TicketYear", SqlDbType.SmallInt)
parm.Value = DBNull.Value
parm.Direction = ParameterDirection.Input
'Add @TicketID parameter
parm = comm.Parameters.Add("@TicketID", SqlDbType.Int)
parm.Value = DBNull.Value
parm.Direction = ParameterDirection.Input
'Add Output parameters
'Add @TktClassID parameter
parm = comm.Parameters.Add("@TktClassID", SqlDbType.SmallInt)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.TktClassID
'Add @TktRequestTypeID parameter
parm = comm.Parameters.Add("@TktRequestTypeID", SqlDbType.SmallInt)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.TktRequestTypeID
'Add @DateOpened parameter
parm = comm.Parameters.Add("@DateOpened", SqlDbType.DateTime)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.DateOpened
'Add @DateClosed parameter
parm = comm.Parameters.Add("@DateClosed", SqlDbType.DateTime)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.DateClosed
'Add @DateLastAssigned parameter
parm = comm.Parameters.Add("@DateLastAssigned", SqlDbType.DateTime)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.DateLastAssigned
'Add @DateLastStatusChange parameter
parm = comm.Parameters.Add("@DateLastStatusChange", SqlDbType.DateTime)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.DateLastStatusChange
'Add @TktStatus parameter
parm = comm.Parameters.Add("@TktStatusID", SqlDbType.SmallInt)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.TktStatusID
'Add @DescrRequest parameter
parm = comm.Parameters.Add("@DescrRequest", SqlDbType.VarChar)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.DescrRequest
'Add @DescrResolution parameter
parm = comm.Parameters.Add("@DescrResolution", SqlDbType.VarChar)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.DescrResolution
parm.Value = " " 'Handle bug?
'Add @OpenStatus parameter
parm = comm.Parameters.Add("@OpenStatus", SqlDbType.Bit)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.OpenStatus
'Add @UserLastUpdate parameter
parm = comm.Parameters.Add("@UserLastUpdate", SqlDbType.Char)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.UserLastUpdate
'Add @DateLastUpdate parameter
parm = comm.Parameters.Add("@DateLastUpdate", SqlDbType.DateTime)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.DateLastUpdate
comm.ExecuteNonQuery()
End Using
End Using
Return ticket
End Function
**STORED PROCEDURE DEFINITION
USE [ITSHelpDesk]
GO
/****** Object: StoredProcedure [dbo].[TicketFetch] Script Date: 03/24/2008 08:40:53 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: Tim Peters
-- Create date: 3/17/2008
-- Description: Fetch Ticket from Ticket table
-- =============================================
ALTER PROCEDURE [dbo].[TicketFetch]
-- Add the parameters for the stored procedure here
@TicketYear smallint = 0,
@TicketID int = 0,
@TktClassID smallint = NULL OUTPUT,
@TktRequestTypeID smallint = NULL OUTPUT,
@DateOpened datetime = NULL OUTPUT,
@DateClosed datetime = NULL OUTPUT,
@DateLastAssigned datetime = NULL OUTPUT,
@DateLastStatusChange datetime = NULL OUTPUT,
@TktStatusID smallint = NULL OUTPUT,
@DescrRequest varchar(500) = NULL OUTPUT,
@DescrResolution varchar(500) = NULL OUTPUT,
@OpenStatus bit = NULL OUTPUT,
@UserLastUpdate char(10) = NULL OUTPUT,
@DateLastUpdate datetime = NULL OUTPUT
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
SELECT
@TktClassID = [TktClassID],
@TktRequestTypeID = [TktRequestTypeID],
@DateOpened = [DateOpened],
@DateClosed = [DateClosed],
@DateLastAssigned = [DateLastAssigned],
@DateLastStatusChange = [DateLastStatusChange],
@TktStatusID = [TktStatusID],
@DescrRequest = [DescrRequest],
@DescrResolution = [DescrResolution],
@OpenStatus = [OpenStatus],
@UserLastUpdate = [UserLastUpdate],
@DateLastUpdate = [DateLastUpdate]
FROM [dbo].[Ticket]
WHERE [TicketYear] = @TicketYear AND [TicketID] = @TicketID
END
RETURN
View 3 Replies
View Related
Nov 30, 2007
I hav the following problem. I have written an stored procedure in sql server 2000 as the following
CREATE PROCEDURE dbo.pa_rellena
@pFechaInicio datetime
AS
declare @pFechaFin datetime
declare @auxcod_cen char(10)
declare @importeEfectivo decimal(17,2)
declare @importeTarjetas1 decimal(17,2)
declare @importeTarjetas2 decimal(17,2)
declare @importeVales decimal(17,2)
declare @importeTalones decimal(17,2)
declare @importeGastos decimal(17,2)
select @pFechaFin=@pFechaInicio+1
--Borramos las tablas temporales si las hemos creado con anterioridad y no se han borrado
if object_id('tmpCentros') is not null
drop table tmpCentros
if object_id('tmpCentros2') is not null
drop table tmpCentros2
if object_id('tmpMaxCajas') is not null
drop table tmpMaxCajas
if object_id('tmpCajasCentro') is not null
drop table tmpCajasCentro
if object_id('tmpVales') is not null
drop table tmpVales
if object_id('tmpDiarioEfectivo') is not null
drop table tmpDiarioEfectivo
if object_id('tmpDiarioTalones') is not null
drop table tmpDiarioTalones
if object_id('tmpDiarioTarjetas') is not null
drop table tmpDiarioTarjetas
if object_id('tmpDiarioSegundaForma') is not null
drop table tmpDiarioSegundaForma
if object_id('tmpDiarioGastosTarjetas') is not null
drop table tmpDiarioGastosTarjetas
if object_id('temp1') is not null
drop table temp1
--Seleccionamos todos los centros de Salvador Bachiller
select * into tmpCentros2
from centros
where centros.tienda=1
order by cod_cen
--Seleccionamos el maximo de cajas por cada centro
select cod_cen, max(cod_caja) as cajas into tmpMaxCajas
from cierrecaja
where fecha>=@pFechaInicio and fecha<@pFechaFin
group by cod_cen
order by cod_cen
--Mezclamos los centros con el maximo de cajas
select c.cod_cen, c.Centro, c.Direccion, c.localidad, c.provincia, c.cpostal, c.telefono, m.cajas, operaciones, cajas_tot, tienda, franquicia into tmpCentros
from tmpCentros2 as c left outer join tmpMaxCajas as m on c.cod_cen=m.cod_cen
--Cajas por centro
select distinct cod_cen as cod_cen, cod_caja as cod_caja into tmpCajasCentro
from cierrecaja
where fecha>=@pFechaInicio and fecha<@pFechaFin
--Los vales de cada centro
select cod_cen,sum(importe) as imp1 into tmpVales
from vales where
fecha>=@pFechaInicio and fecha<@pFechaFin
group by cod_cen
--Efectivo de cada centro
select cod_cen,'01' as vendedor,'EFECTIVO' as descripcion, (sum(diario.TotEuro)-Sum(Diario.Imppa2)) as importe1,0 as exp1, (sum(Diario.TotEuro)-sum(Diario.imppa2)) as importe2 into tmpDiarioEfectivo
from diario
where fecha>=@pFechaInicio and fecha<@pFechaFin and cod_cen in (select cod_cen from tmpCentros) and cod_caja in (select cod_caja from tmpCajasCentro) and diario.cod_pago='01'
group by cod_cen
--Talones por centro
select centros.cod_cen,'02' as vendedor,'TALONES' as descripcion, sum(diario.TotEuro) as importe1,0 as exp1, sum(Diario.TotEuro) as importe2 into tmpDiarioTalones
from centros inner join diario on centros.cod_cen=diario.cod_cen
where fecha>=@pFechaInicio and fecha<@pFechaFin and diario.cod_cen in (select cod_cen from tmpCentros) and cod_caja in (select cod_caja from tmpCajasCentro) and diario.cod_pago='02'
group by centros.cod_cen
--Tarjetas por centro
select cod_cen,'03' as vendedor,'TARJETAS' as descripcion, sum(diario.TotEuro) as importe1,0 as exp1, sum(Diario.TotEuro*(FPago.Descuento/100)) as importe2, sum(Diario.TotEuro) - sum(Diario.TotEuro*(FPago.Descuento/100)) as importe3 into tmpDiarioTarjetas
from FPago left join Diario on fpago.Cod_pago=Diario.cod_pago
where fecha>=@pFechaInicio and fecha<@pFechaFin and cod_cen in (select cod_cen from tmpCentros) and cod_caja in (select cod_caja from tmpCajasCentro) and Fpago.Descuento<>0
group by cod_cen
--Segunda Froma de Pago
select cod_cen,'03' as vendedor,'TARJETAS' as descripcion,sum(diario.imppa2) as importe1 into tmpDiarioSegundaForma
from fpago left join Diario on Fpago.cod_pago=diario.cod_pa1
where fPago.cod_pago<>'99' and fecha>=@pfechaInicio and fecha<@pFechaFin and cod_cen in (select cod_cen from tmpCentros) and cod_caja in (select cod_caja from tmpCajasCentro) and Fpago.Descuento<>0
group by cod_cen
--Comisiones tarjetas de pago
select cod_cen,'10' as vendedor, 'GASTOS (-)' as descripcion, sum(Diario.imppa2*(fPago.Descuento/100)) as importe2 into tmpDiarioGastosTarjetas
from Fpago left join Diario on FPago.cod_pago= Diario.cod_pa1
where fPago.cod_pago<>'99' and fecha>=@pFechaInicio and fecha<@pFechaFin and cod_cen in (select cod_cen from tmpCentros) and cod_caja in (select cod_caja from tmpCajasCentro) and Fpago.Descuento<>0
group by cod_cen
/*
--Venta neta por centro
declare cursortemporal cursor for select cod_cen from TmpCentros2
open cursortemporal
delete detallecaja_aux
fetch next from cursortemporal into @auxcod_cen
while @@fetch_status=0
Begin
select @importeVales=imp1 from tmpVales where cod_cen=@auxcod_Cen
select @importeEfectivo=importe2 from tmpDiarioEfectivo where cod_cen=@auxcod_Cen
select @importeTalones=importe2 from tmpDiarioTalones where cod_cen=@auxcod_cen
select @importeTarjetas1=importe3 from tmpDiarioTarjetas where cod_cen=@auxcod_cen
select @importeTarjetas2=importe1 from tmpDiarioSegundaForma where cod_cen=@auxcod_cen
select @importeGastos=importe2 from tmpDiarioGastosTarjetas where cod_cen=@auxcod_cen
select @importeVales=isnull(@importeVales,0)
select @importeEfectivo=isnull(@importeEfectivo,0)
select @importeTalones=isnull(@importeTalones,0)
select @importeTarjetas1=isnull(@importeTarjetas1,0)
select @importeTarjetas2=isnull(@importeTarjetas2,0)
select @importeGastos=isnull(@importeGastos,0)
print @auxcod_cen
print @importeVales
print @importeEfectivo
print @importeTalones
print @importeTarjetas1
print @importeTarjetas2
print @importeGastos
insert into detallecaja_aux (cod_cen,importe1)
values(@auxcod_cen, @importeVales+@importeEfectivo+@ImporteTalones+@ImporteTarjetas1+@importeTarjetas2-@importeGastos)
fetch next from cursortemporal into @auxcod_cen
select @importeVales=0
select @importeEfectivo=0
select @importeTalones=0
select @importeTarjetas1=0
select @importeTarjetas2=0
select @importeGastos=0
end
close cursortemporal
*/
select * from detallecaja_aux
GO
When I try to run it from visual basic it slow down the sql server.
What can I do?
View 2 Replies
View Related
Jul 2, 2007
I had thought that this was possible but I can't seem to figure out the syntax. Essentially I have a report where one of the parameters is populated by a stored procedure.
Right now this is easily accomplished by using "exec <storedprocname>" as the query string for the report parameter. However I am not clear if it is possible to now incorporate User!UserID as parameter to the stored procedure. Is it? Thanks
View 1 Replies
View Related
Jan 17, 2008
Hi all,
In my SQL Server Management Studio Express (SSMSE), I executed the following sql code suuccessfully:
--insertNewRocord.sql--
USE shcDB
GO
CREATE PROC sp_insertNewRecord @procPersonID int,
@procFirstName nvarchar(20),
@procLastName nvarchar(20),
@procAddress nvarchar(50),
@procCity nvarchar(20),
@procState nvarchar(20),
@procZipCode nvarchar(20),
@procEmail nvarchar(50)
AS INSERT INTO MyFriends
VALUES (@procPersonID, @procFirstName, @procLastName, @procAddress,
@procCity, @procState, @procZipCode, @procEmail)
GO
EXEC sp_insertNewRecord 7, 'Peter', 'Wang', '678 Old St', 'Detroit',
'Michigon', '67899', 'PeterWang@yahoo.com'
GO
=======================================================================
Now, I want to insert a new record into the dbo.Friends table of my shcDB by executing the following T-SQL and Visual Basic 2005 codes that are programmed in a VB2005 Express project "CallshcDBspWithAdoNet":
--Form1.vb--
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Public Class Form1
Public Sub InsertNewFriend()
Dim connectionString As String = "Integrated Security-SSPI;Persist Security Info=False;" + _
"Initial Catalog=shcDB;Data Source=.SQLEXPRESS"
Dim connection As SqlConnection = New SqlConnection(connectionString)
connection.Open()
Try
Dim command As SqlCommand = New SqlCommand("sp_InsertNewRecord", connection)
command.CommandType = CommandType.StoredProcedure
EXEC sp_insertNewRecord 6, 'Craig', 'Utley', '5577 Baltimore Ave',
'Ellicott City', 'MD', '21045', 'CraigUtley@yahoo.com'
Console.WriteLine("Row inserted: " + _
command.ExecuteNonQuery().ToString)
Catch ex As Exception
Console.WriteLine(ex.Message)
Throw
Finally
connection.Close()
End Try
End Sub
End Class
===========================================================
I ran the above project in VB 2005 Express and I got the following 5 errors:
1. Name 'EXEC' is not declared (in Line 16 of Form1.vb)
2. Method arguments must be enclosed in parentheses (in Line 16 of Form1.vb)
3. Name 'sd-insertNewRecord' is not declared. (in Line 16 of Form1.vb)
4.Comma, ')', or a valid expression continuation expected (in Line 16 of Form1.vb)
5. Expression expected (in Line 16 of Form1.vb)
============================================================
I know that "EXEC sp_insertNewRecord 6, 'Craig', 'Utley', '5577 Baltimore Ave',
'Ellicott City', 'MD', '21045', 'CraigUtley@yahoo.com' "in Line 16 of Form1.vb is grossly in error.
But I am new in doing the programming of T-SQL in VB 2005 Express and I am not able to change it.
Please help and advise me how to correct these problems.
Thanks in advance,
Scott Chang
View 22 Replies
View Related
Jan 23, 2008
Hi Jonathan Kehayias, Thanks for your valuable response.
I had a hard time to sumbit my reply in that original thread yesterday. So I created this new thread.
Here is my response to the last code/instruction you gave me:
I corrected a small mistake (on Integrated Security-SSPI and executed the last code you gave me.
I got the following debug error message:
1) A Box appeared and said: String or binary data would be truncated.
The statement has been terminated.
|OK|
2) After I clicked on the |OK| button, the following message appeared:
This "SqlException was unhandled
String or binary data would be truncated.
The statement has been terminated."
is pointing to the "Throw" code statement in the middle of
.......................................
Catch ex As Exception
MessageBox.Show(ex.Message)
Throw
Finally
..........
Please help and advise how to correct this problem in my project that is executed in my VB 2005 Express-SQL Server Management Studio Express PC.
Thanks,
Scott Chang
The code of my Form1.vb is listed below:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Public Class Form1
Public Sub InsertNewFriend()
Dim connectionString As String = "Data Source=.SQLEXPRESS;Initial Catalog=shcDB;Integrated Security=SSPI;"
Dim connection As SqlConnection = New SqlConnection(connectionString)
Try
connection.Open()
Dim command As SqlCommand = New SqlCommand("sp_insertNewRecord", connection)
command.CommandType = CommandType.StoredProcedure
command.Parameters.Add("@procPersonID", SqlDbType.Int).Value = 7
command.Parameters.Add("@procFirstName", SqlDbType.NVarChar).Value = "Craig"
command.Parameters.Add("@procLastName", SqlDbType.NVarChar).Value = "Utley"
command.Parameters.Add("@procAddress", SqlDbType.NVarChar).Value = "5577 Baltimore Ave"
command.Parameters.Add("@procCity", SqlDbType.NVarChar).Value = "Ellicott City"
command.Parameters.Add("@procState", SqlDbType.NVarChar).Value = "MD"
command.Parameters.Add("@procZipCode", SqlDbType.NVarChar).Value = "21045"
command.Parameters.Add("@procEmail", SqlDbType.NVarChar).Value = "CraigUtley@yahoo.com"
Dim resulting As String = command.ExecuteNonQuery
MessageBox.Show("Row inserted: " + resulting)
Catch ex As Exception
MessageBox.Show(ex.Message)
Throw
Finally
connection.Close()
End Try
End Sub
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
InsertNewFriend()
End Sub
End Class
View 6 Replies
View Related
Mar 26, 2007
Has anyone encountered this before?
Procedure or Function 'stored procedure name' expects parameter '@parameter', which was not supplied.
It seems that my code is not passing the parameter to the stored procedure.
When I click this hyperlink:
<asp:HyperLink
ID="HyperLink1"
Runat="server"
NavigateUrl='<%# "../Division.aspx?CountryID=" + Eval("CountryID")%>'
Text='<%# Eval("Name") %>'
ToolTip='<%# Eval("Description") %>'
CssClass='<%# Eval("CountryID").ToString() == Request.QueryString["CountryID"] ? "CountrySelected" : "CountryUnselected" %>'>
</asp:HyperLink>
it is suppose to get the country name and description, based on the country id.
I am passing the country id like this.
protected void Page_Load(object sender, EventArgs e)
{
PopulateControls();
}
private void PopulateControls()
{
string countryId = Request.QueryString["CountryID"];
if (countryId != null)
{
CountryDetails cd = DivisionAccess.GetCountryDetails(countryId);
divisionNameLabel.Text = cd.Name;
divisionDescriptionLabel.Text = cd.Description;
}
}
To my app code like this:
public struct CountryDetails
{
public string Name;
public string Description;
}
public static class DivisionAccess
{
static DivisionAccess()
public static DataTable GetCountry()
{
DbCommand comm = GenericDataAccess.CreateCommand();
comm.CommandText = "GetCountry";
return GenericDataAccess.ExecuteSelectCommand(comm);
}
public static CountryDetails GetCountryDetails(string cId)
{
DbCommand comm = GenericDataAccess.CreateCommand();
comm.CommandText = "GetCountryDetails";
DbParameter param = comm.CreateParameter();
param.ParameterName = "@CountryID";
param.Value = 2;
param.DbType = DbType.Int32;
comm.Parameters.Add(param);
DataTable table = GenericDataAccess.ExecuteSelectCommand(comm);
CountryDetails details = new CountryDetails();
if (table.Rows.Count > 0)
{
details.Name = table.Rows[0]["Name"].ToString();
details.Description = table.Rows[0]["Description"].ToString();
}
return details;
}
As you can see I have two stored procedures I am calling, one does not have a parameter and the other does. The getcountry stored procedure returns the list of countries in a menu that I can click to see the details of that country. That is where my problem is when I click the country name I get
Procedure or Function 'GetCountryDetails' expects parameter '@CountryID', which was not supplied
Someone please help!
Thanks Nickdel68
View 5 Replies
View Related
Mar 16, 1999
I have a problem with alot of my SPs. All compile correctly but cause erroneous data due to IF statements begin ignored due to
characters (see below).
Example SP...
-- Opened within last 12 Months
IF @NEWACCIND = 1
BEGIN
EXECUTE usp_DFDX03_D0150_A4 @COSTALL OUTPUT
END
-- Accounts in Arrears in Current Quarter
Should look like ...
-- Opened within last 12 Months
IF @NEWACCIND = 1
BEGIN
EXECUTE usp_DFDX03_D0150_A4 @COSTALL OUTPUT
END
-- Accounts in Arrears in Current Quarter
I need to find all SPs with double
instance and manually replace. There are hundreds of SPs in total. I have tried
SELECTCOLID, ID
FROMSYSCOMMENTS
WHERECHARINDEX (CONVERT (VARCHAR(3), CHAR(13)+CHAR(13)), TEXT) > 0
but this also returns SPs containing 2 consecutive blank lines as well (which there are alot of due to formatting of T-SQL).
Really I need to distuinguish between
and new line which both appear to be CHAR(13)
Any one got any ideas
Thanks in advance
Jasper
View 2 Replies
View Related
Feb 12, 2008
I have this update procedure that updates and encrypts a credit card column. I added the pass phrase to a table and now I'm trying to use that pass phrase in my update procedure.
When I run the update from the app the error is that the procedure is not getting the @Phrase parameter.
Can anyone see why this might be?ALTER PROCEDURE [dbo].[UpdatePayment]
@paymentID int,
@PaymentDate datetime,
@TenderTypeID int,
@PaymentAmount money,
@CreditCardType int,
@ExpirationDate datetime,
@ccNumber nvarchar(50),
@Phrase nvarchar(25)
AS
BEGIN
SET NOCOUNT ON;
SET @Phrase = (SELECT Phrase FROM tblSpecialStuff)
UPDATE tblReceipts SET
PaymentDate=@PaymentDate,
TenderTypeID=@TenderTypeID,
AmountPaid=@PaymentAmount,
CreditCardType=@CreditCardType,
ExpirationDate=@ExpirationDate,
ccNumber = (CASE
WHEN @CreditCardType > 0 THEN
EncryptByPassPhrase(@Phrase,@ccNumber)
ELSE @ccNumber
END)
END
View 1 Replies
View Related
Dec 23, 2003
hi,
i need to run a stored procedure from an asp page that will import data into a temporary table.
i am having trouble with passing the parameter from the Exec command (currently developing in QA). It works ok where i want to use a value such as 'PC', or 'printer' or 'laptop' where the import sql has a where clause of '... = <<parameter>>...'.
I want however to be able to pass it a value such as ['printer','laptop','pc']so that the procedure will collect the data into the temp table with an '...in <<parameter>>'
this falls over and retrieves zero rows. the parameter is passed to the sp correctly as i have used a print command to display it, it comes back as 'pc',printer','laptop'. It appears to be the ' in ' that is not parsing the parameter.
can anyone help please?
TIA
View 3 Replies
View Related
Sep 3, 1999
Hello!
I have a problem when i want to construct a stored procedure. I want to pass a parameter with customerid's. The problem is that I don´t know how many customerId's I send to the stored procedure, because the user select the customerId's from a selectbox. The SQL string I want to excute looks like this
SELECT CustomerName FROM Customer WHERE CustomerId IN (199, 301, 408... )
How should I create the stored procedure so I put the customerId values in a parameter, like the procedure below? (I know that this not will work)
CREATE PROCEDURE rpt_PM2000_test(@SCustomerId varChar)
AS
BEGIN
SELECT Customer
FROM Customer
WHERE CustomerId IN (@sCustomerId)
END
/Fredrik
View 3 Replies
View Related
Apr 22, 2007
In the Create portion of a stored procedure, does the line in bold mean
that if the parameter @RegoDate is not provided, then use the current datetime?
CREATE PROCEDURE spGetRegoDetail
@Owner nvarchar(20),
@RegoDate datetime = getdate
AS ...
Thanks in advance,
G11DB
View 2 Replies
View Related
Mar 4, 2004
Hi,
I have an Access front end/MSDE2000 backend system. There is a form that has a subform which is based on the results of a stored procedure. Both my subform and mainform contain intOrderID ( which is the field i want to link both of them with ).
I would like to have the subform's data updated when changing records in the mainform. In Access, this was simple ( link child and master fields ), but not with MSDE2000 as a back end ( ADO connection thing...)
I think i have to create something to filter the results of the stored procedure, but i dont like the fact the the entire dataset needs to be transmitted over the network ( most of the time, users will only be creating new records, or reviewing recently created ones )
I'm really not sure as to how to accomplish this... Any ideas?
thanks!
View 10 Replies
View Related
Jun 16, 2007
HiI'm trying to alter my stored procedure to take a parameter for theDatabase Name, but as usual the syntax is killing me.Thanks for any helpDennis'--------------------------------------------------------------------------*--------------------------------Before - This Works without a paramater'--------------------------------------------------------------------------*--------------------------------set ANSI_NULLS ONset QUOTED_IDENTIFIER ONgoALTER PROCEDURE [dbo].[sp_CreateNewClientDb]ASCREATE DATABASE [MyClientDatabase] ON PRIMARY( NAME = N'MyClientDatabase',FILENAME = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLDATAMyClientDatabase.mdf' ,SIZE = 11264KB ,MAXSIZE = UNLIMITED,FILEGROWTH = 1024KB )LOG ON( NAME = N'MyClientDatabase_log',FILENAME = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLDATAMyClientDatabase_log.ldf' ,SIZE = 1024KB ,MAXSIZE = 2048GB ,FILEGROWTH = 10%)COLLATE SQL_Latin1_General_CP1_CI_AS'--------------------------------------------------------------------------*--------------------------------After - This Doesn't work with a parameter'--------------------------------------------------------------------------*--------------------------------set ANSI_NULLS ONset QUOTED_IDENTIFIER ONgoALTER PROCEDURE [dbo].[sp_CreateNewClientDb]ASCREATE DATABASE @ClientDBName ON PRIMARY( NAME = N@ClientDBName,FILENAME = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLDATA@ClientDBName' + '.mdf' ,SIZE = 11264KB ,MAXSIZE = UNLIMITED,FILEGROWTH = 1024KB )LOG ON( NAME = N'@ClientDBName' + '_log',FILENAME = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLDATA@ClientDBName' + '_log.ldf' ,SIZE = 1024KB ,MAXSIZE = 2048GB ,FILEGROWTH = 10%)COLLATE SQL_Latin1_General_CP1_CI_ASMsg 102, Level 15, State 1, Procedure sp_CreateNewClientDb, Line 4Incorrect syntax near '@ClientDBName'.
View 5 Replies
View Related
Dec 7, 2007
Hi all,
I'm trying to create a SP with a parameter for server.
CREATE PROCEDURE dbo.sp_Testing
@server ???????
AS
SELECT * from @server
GO
Does anyone know how to do what i'm trying here..???
I don't know the type of the parameter...is it just simply server? or is there another specific name for it???
thanks,
View 6 Replies
View Related
Jul 12, 2007
Hi All,
i have migrated a DTS package wherein it consists of SQL task.
this has been migrated succesfully. but when i execute the package, i am getting the error with Excute SQL task which consists of Store Procedure excution.
But the SP can executed in the client server. can any body help in this regard.
Thanks in advance,
Anand
View 4 Replies
View Related
Apr 27, 2007
I'm attempting to return a value from my stored procedure. Here is my button click event that runs the stored procedure. protected void btn_Move_Click(object sender, EventArgs e)
{
/*variables need for the update of the old staff record
and the creation of the new staff record.
*/
BMSUser bmsUser = (BMSUser)Session["bmsUser"];
int staffid = Convert.ToInt32(bmsUser.CmsStaffID);
int oldStaffProfileID = Convert.ToInt32(Request.QueryString["profileid"]);
string newManager = Convert.ToString(RadComboBox_MangersbyOrg.Text);
int newMangerProfileID = Convert.ToInt32(RadComboBox_MangersbyOrg.Value);
SqlConnection conn = new SqlConnection(connect);
SqlCommand cmd = new SqlCommand();
cmd.Connection = conn;
cmd.CommandType = CommandType.StoredProcedure;
cmd.CommandText = "sp_BMS_MoveStaffMember";
cmd.Parameters.Add("@OldStaffProfileID", SqlDbType.Int);
cmd.Parameters["@OldStaffProfileID"].Precision = 9;
cmd.Parameters["@OldStaffProfileID"].Scale = 0;
cmd.Parameters["@OldStaffProfileID"].Value = oldStaffProfileID;
cmd.Parameters.Add("@NewManagerProfileID", SqlDbType.Int);
cmd.Parameters["@NewManagerProfileID"].Precision = 9;
cmd.Parameters["@NewManagerProfileID"].Scale = 0;
cmd.Parameters["@NewManagerProfileID"].Value = newMangerProfileID;
cmd.Parameters.Add("@LastModifiedBy", SqlDbType.Int);
cmd.Parameters["@LastModifiedBy"].Precision = 9;
cmd.Parameters["@LastModifiedBy"].Scale = 0;
cmd.Parameters["@LastModifiedBy"].Value = staffid;
SqlParameter sp = new SqlParameter("@OLDManagerReturn", SqlDbType.Int);
sp.Direction = ParameterDirection.Output;
cmd.Parameters.Add(sp);
lbl_ERROR.Text = Convert.ToString(sp);
conn.Open();
SqlTransaction trans = conn.BeginTransaction();
cmd.Transaction = trans;
cmd.ExecuteNonQuery();
conn.Close();
My parameter sp is coming back null for some reason. Am I not setting the parameter correctly? I set a break point and it says the value is null.
Here is the parts of my stored proc returning the value...
DECLARE @OLDManagerReturn numeric(9)
SELECT @OLDManagerReturn = ManagerProfileID FROM tblBMS_Staff_rel_Staff WHERE StaffProfileID = @OldStaffProfileID AND Active=1 AND BudgetYear = @BudgetYear
RETURN @OLDManagerReturn
View 5 Replies
View Related
Jun 19, 2007
In the SqlDbType enumeration there is no value for the new (max) types, only varchar. If Im passing a large string, it will get cut off at 8K. So how do I specify my varchar parameter as being of the max type ?
View 1 Replies
View Related
Jul 20, 2007
Hi,This works:CREATE PROCEDURE MyProc @Date smalldatetime = '2005-01-01'AS... But this does not CREATE PROCEDURE MyProc @Date smalldatetime = GETDATE()AS... I'm talking about sql2005. Can anyone help how to overcome this?
View 3 Replies
View Related
Aug 2, 2007
How do I assign a temp value to a parameter in a stored procedure?
I am trying like so:
Alter PROCEDURE ap_Insert_Pricing_ListPrice @partNumber varchar = "CQ2"AS SELECT PartNumber FROM Pricing WHERE (PartNumber = @partNumber)GO
What is the correct way to assign a temp value for testing purposes in SQL Server 2000 Query Analyzer?
When I try:
Alter PROCEDURE ap_Insert_Pricing_ListPrice @partNumber varchar
AS
Set @partNumber = "10-AF40-N04B-JZ"SELECT PartNumber FROM Pricing WHERE (PartNumber = @partNumber)GO
I get error:
Invalid column name '10-AF40-N04B-JZ'.
View 2 Replies
View Related
Aug 19, 2007
I have two stored procedures one generates an output parameter that I then use in the second stored procedure.
1 Try2 Dim myCommand As New SqlCommand("JP_GetChildren", myConn)3 myCommand.CommandType = Data.CommandType.StoredProcedure4
5 myCommand.CommandType = Data.CommandType.StoredProcedure6 myCommand.Parameters.Add(New SqlParameter("@ParentRule", Data.SqlDbType.NVarChar))7 myCommand.Parameters.Add(New SqlParameter("@PlantID", Data.SqlDbType.NVarChar))8 myCommand.Parameters.Add(New SqlParameter("@New_ReleasingRulePrefix", Data.SqlDbType.NVarChar))9 myCommand.Parameters.Add(New SqlParameter("@New_ReleasingRuleSuffix", Data.SqlDbType.NVarChar))10 myCommand.Parameters.Add(New SqlParameter("@New_PlantID", Data.SqlDbType.NVarChar))11 myCommand.Parameters.Add(New SqlParameter("@New_RuleSetID", Data.SqlDbType.NVarChar))12 myCommand.Parameters.Add(New SqlParameter("@Count", Data.SqlDbType.Int))13 myCommand.Parameters.Add(New SqlParameter("@IDField", Data.SqlDbType.NVarChar))14
15 Dim OParam As New SqlParameter()16 OParam.ParameterName = "@IDFieldOut"
17 OParam.Direction = ParameterDirection.Output18 OParam.SqlDbType = SqlDbType.NVarChar19 myCommand.Parameters.Add(OParam)20
21
22 myCommand.Parameters("@ParentRule").Value = txtParentRule.Text23 myCommand.Parameters("@PlantID").Value = txtStartingPlantID.Text24 myCommand.Parameters("@New_ReleasingRulePrefix").Value = txtReleaseRuleFromPrefix.Text25 myCommand.Parameters("@New_ReleasingRuleSuffix").Value = txtReleaseRuleFromSuffix.Text26 myCommand.Parameters("@New_PlantID").Value = txtEndingPlantID.Text27 myCommand.Parameters("@New_RuleSetID").Value = txtEndingRuleSetID.Text28 myCommand.Parameters("@Count").Value = 129 myCommand.Parameters("@IDField").Value = " "
30 myCommand.Parameters("@IDFieldOut").Value = 031
32 myCommand.ExecuteNonQuery()33
34 Dim IDField As String = myCommand.Parameters("@IDFieldOut").Value35
If i run this stored procedure in sql it does return my parameter. But when i run this code IDField comes back null. Any ideas
View 6 Replies
View Related
Feb 3, 2008
I have a stored procedure that inserts a new record, and returns the ID value for the newly inserted record. The procedure works fine, but I'm unable to get that return value in my code. Here's what I have:
IF OBJECT_ID ( 'dbo.dbEvent', 'P') IS NOT NULL
DROP PROCEDURE dbEvent
GO
CREATE PROCEDURE
@Name varchar(200)
,@Location varchar(200)
AS
INSERT INTO Event
(
NAME
, LOCATION
)
VALUES
(
NAME
, @LOCATION
)
SELECT SCOPE_IDENTITY()
And my code behind: public Int64 Insert(SqlConnection Conn)
{
try
{
using (SqlCommand Command = new SqlCommand("dbo.dbEvent", Conn))
{
Command.CommandType = CommandType.StoredProcedure;
Command.Parameters.Add("@ID", ID).Direction = ParameterDirection.Output;
Command.Parameters.Add("@NAME", SqlDbType.VarChar, 200).Value = PermitName;
Command.Parameters.Add("@LOCATION", SqlDbType.VarChar, 200).Value = Location;
if (Conn.State != ConnectionState.Open) Conn.Open();
Command.ExecuteNonQuery();
Int64 _requestId = Convert.ToInt64(Command.Parameters.Add("@ID", SqlDbType.BigInt).Value.ToString());
return _requestId;
}
I'm getting the error that I have "Too many arguments specified" in my Insert() method. When I test the procedure in Query Analyzer, it works fine and returns the correct value.
Any suggestions? Don't I need to declare that return value in my .NET code as an output parameter?
View 2 Replies
View Related
