How To View All The Constraints In Sql Server
Feb 2, 2008hi,
how to view all system constraints in sql server..
hi,
how to view all system constraints in sql server..
Hi all. I have a SQL Server DB that i need to port out of SQL Server. I do not have a diagram illustrating the constraints in the construct of the tables. What is the best way to for me learn the relationships of the tables in sql server?
thanks for your help
how to view all system constraints in sql server
View 1 Replies View RelatedI remember once using a command in Query Analyser that gave me all theinformation about a table. It showed details about the columns,constraints, keys, indexes etc.I can't remember how I did this? Can anyone help me?It could of been a stored proc that I called or a query on the systemtables.I do know that it was very simple to do and it was executed in QueryAnalyser.Can anyone help me?
View 2 Replies View RelatedI know this is probably a flick of a switch but I cannot figure out which switch. Setup is SQL Server / Stored Procedures / DAL / BLL(skipped for testing) / PL. The stored procedure queries from only one table and two columns are ignored because they are being phased out. I can run the stored procedure and preview the data in the DAL but when I create a page with an ODS linked to the DAL and a GridView I get this error. I checked every column that does not allow nulls and they all have values. I checked unique columns (ID is the only unique and is Identity=Yes in the table definition). I checked foreign-key columns for values that are not in the foreign table and there are none. Any ideas why do I get this?
Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.
Hi,
I am getting the above error when trying to load a report into my Web Application, I have tracked the error down to one specific field in my database. Even though this field is a NVarChar field and is of size 30 it would seem that there is an issue returning the value from the field. I can write it into the database no problems but when I try to get it out of the database it returns the above error.
e.g
MOB 401.908.804 - Fails
0401.907.324 - okay
8239 9082 (pager) - fails
Anyone got an idea on how to fix this????
Regards..
Peter.
i have a question about constraints in SQL server.
i have three tables:
Client
---------
clientID
name
etc...
Bank
-------
BankID (a virtual number, identity)
ClientID (FK: Client)
BankAccountNumber
BankName
Order
--------
OrderID
ClientID
BankID
a Client an have one or more bankAccounts.. if he place an order, he can select wich bankaccount will be used to pay.
how do i have to set the constraints so that the bankAccount in Order, is allways of THAT client in order.???
Thanx...
HI I'm newbie in sql server and I am looking how to define a constraint between two tables that are located each in a different schema. I have tried from the Enterprise Manager but without look, could you please help me with this,
thank you
Hi,
I am DB programmer, How can i get Table Constraints to XML in SQL-Server 2000 with out data.
Is there any way to defer constriants in sql server 2005? I have found some sites that say use the keyword deferred but that always give me an "Incorrect syntax near 'deferred' "error.
View 1 Replies View RelatedHello
I have four tables as xml. I'm successfully bulk loading them into 4 tables, using the SQL Server Destination, with check constraints unchecked.
The process manages to load all the data without any FK issue.
After that, how can I check the constraints ? (I've read a bit about is_not_trusted and sys.check_constraints)
Thibaut
When updating data using .NET 2.0 SqlDataAdapter and a strong typed dataset, it seems that constraints (foreign key) and trigger are disabled. I'm using a stored procedure to delete rows and calling it from SSMS causes the trigger to fire. Calling it via the SqlDataAdapter not.
Can someone confirm this?
At least here, my triggers don't fire.
How can I enable, that triggers in SQL Server do fire?
Are there differences in this behaviour when using batch updates or not?
TIA,
Hannoman
I have created a simple package to load an Excel Spreadsheet into a SQL Server table. There is a one to one relationship between the columns in the .xls file and the columns in the DB record. I am getting integrity constraint errors when I try to load all numeric data from the spreadsheet (defined as Category General in excel, not defined as numeric but consisting of all numeric characters) into a column defined as (nvarchar(20), not null) in SQL Server Management Studio. There are no constraints on the column.
I have been able to temporarily bypass the offending rows, but I do need to load them into SQL Server. The problem column has a mixture of data, two examples would be: N255, 168050. It's the 168050 value that's causing the Task to bomb. How can I get this loaded into my table ?
I am running the package from within MS Visual Studio 2005 Version 8, Excel is version 2003 (11.8120.8122) SP2
Thanks,
Chris
Hi all,
Suppose I have set a CHECK constraint to a column where Salary field is not permitted to be less than 1000 or greater than 10000.
In this situation, when I insert a new record with salary as 10, using a stored procedure from Visual Studio, how will I trap the error from C# Code?
Thanks
Tomy
I have table variable in which I am inserting data from sql server database. I have made one of the columns called repaidID a primary key so that a clustered index will be created on the table variable. When I run the stored procedure used to insert the data. I have this error message; Violation of Primary key Constraint. Cannot insert duplicate primary key in object. The value that is causing this error is (128503).
I have queried the repaidid 128503 in the database to see if it is a duplicate but could not find any duplicate. The repaidID is a unique id normally use by my company and does not have duplicates.
Any tool, script, procedure, or otherwise that will solve this problem?
CREATE TABLE [Table 1] (
Id varchar,
TableTwoId varchar,
OtherData varchar )
CREATE TABLE [Table 2] (
Id varchar,
MoreData varchar )
What is the link between these two tables?
I have databases that have zero keys defined, no foreign key constraints, no unique value constraints. I cannot assume that an Identity column is the Id. The end game is be able to output that [Table 1].[TableTwoId] = [Table 2].[Id] but cannot assume that all linkage in the database will be as simple as saying "if the field name contains a table name + Id then it is the Id in that table."
Currently have written a script that will cycle through all columns and start identifying keys in singular tables based on the distinctness of the values in each column (i.e. Column1 is 99% distinct so is the unique value). It will also combine columns if the linkage is the combination of one or more columns from Table 1 = the same number of columns in Table 2. This takes a long time, and it somewhat unreliable as IDENTITY columns may seem to relate to one another when they don't.
CREATE TABLE [Table 1] (
Id varchar,
TableTwoId varchar,
OtherData varchar )
CREATE TABLE [Table 2] (
Id varchar,
MoreData varchar )
What is the link between these two tables?
I have databases that have zero keys defined, no foreign key constraints, no unique value constraints. I cannot assume that an Identity column is the Id. The end game is be able to output that [Table 1].[TableTwoId] = [Table 2].[Id] but cannot assume that all linkage in the database will be as simple as saying "if the field name contains a table name + Id then it is the Id in that table."
Currently have written a script that will cycle through all columns and start identifying keys in singular tables based on the distinctness of the values in each column (i.e. Column1 is 99% distinct so is the unique value). It will also combine columns if the linkage is the combination of one or more columns from Table 1 = the same number of columns in Table 2. This takes a long time, and it somewhat unreliable as IDENTITY columns may seem to relate to one another when they don't.
I'm working on creating a new version of an existing table. I want to keep the old table around, only with a different name. In looking this up I found there's a system routine named sp_rename, which looks like it will work fine.However in thinking about this I realized that the foreign key constraints defined on the table (there's 3 of them) are likely to not be renamed, correct?
If I'm correct, then I suppose I could rename the table, then drop the 3 foreign key constraints, and create them new using different names for those foreign key constraints.
How to copy a table from one server to another server with primary and foreign key constraints.
View 5 Replies View Related
I am using the "Transfer SQL Server Objects Task" to copy some tables from database A to database B including data.
The tables, primary key constraints, Foreign key, data and all transfers nicely except for "DEFAULT CONSTRAINTS" on the tables.
I have failed to find any option in the "Transfer SQL Server Objects Task" task to explicitly say "copy default constraints". So I guess logically it should happen automatically but it doesn't. I hope it is not a bug :-)
Any option anyone knows will help.
Thanks.
I am looking to create a constraint on a table that allows multiplenulls but all non-nulls must be unique.I found the following scripthttp://www.windowsitpro.com/Files/0.../Listing_01.txtthat works fine, but the following lineCREATE UNIQUE CLUSTERED INDEX idx1 ON v_multinulls(a)appears to use indexed views. I have run this on a version of SQLStandard edition and this line works fine. I was of the understandingthat you could only create indexed views on SQL Enterprise Edition?
View 3 Replies View RelatedWrite a CREATE VIEW statement that defines a view named Invoice Basic that returns three columns: VendorName, InvoiceNumber, and InvoiceTotal. Then, write a SELECT statement that returns all of the columns in the view, sorted by VendorName, where the first letter of the vendor name is N, O, or P.
This is what I have so far,
CREATE VIEW InvoiceBasic AS
SELECT VendorName, InvoiceNumber, InvoiceTotal
From Vendors JOIN Invoices
ON Vendors.VendorID = Invoices.VendorID
[code]...
Hi guys 'n gals,
I created a query, which makes use of a temp table, and I need the results to be displayed in a View. Unfortunately, Views do not support temp tables, as far as I know, so I put my code in a stored procedure, with the hope I could call it from a View....
I tried:
CREATE VIEW [qryMyView]
AS
EXEC pr_MyProc
and unfortunately, it does not let this run.
Anybody able to help me out please?
Cheers!
I compared view query plan with query plan if I run the same statementfrom view definition and get different results. View plan is moreexpensive and runs longer. View contains 4 inner joins, statisticsupdated for all tables. Any ideas?
View 10 Replies View RelatedA recent SharePoint upgrade has rendered several views obsolete. I am redefining them so that our upper level executive reports show valid data.(yes, I know that doing anything to sharepoint could cause MS to deny support, having said that, this is something I've inherited and need to fix, pronto) The old view was created like so:
USE [AHMC]
GO
/****** Object: View [dbo].[vwSurgicalVolumes] Script Date: 09/04/2015 09:28:03 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE VIEW [dbo].[vwSurgicalVolumes] AS
SELECT
[code]....
As I said, this view is used in a report showing surgical minutes.SharePoint is now on a new server, which is linked differently (distributed?) I've used OPENQUERY to get my 'new' query to work;
SELECT *
FROM OPENQUERY ([PORTALWEBDB], 'SELECT
--AllLists
AL.tp_ID AS ALtpID
,AL.tp_WebID as altpwebid
,AL.tp_Title AS ALTitle
[code]....
My data (ie surgical minutes, etc) seems to be in the XML column, AUD.tp_ColumnSet . So I need to parse it out and convert it to INT to maintain consistency with the previous view. How do I do this within the context of the view definition?Here is a representation of the new and old view data copied to excel :
<datetime1>2014-08-14T04:00:00</datetime1><float1>2.000000000000000e+000</float1><float2>4.190000000000000e+002</float2><float3>1.600000000000000e+001</float3><float4>8.110000000000000e+002</float4><sql_variant1 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes"
[Code] ....
can't format it to make it look decent. InHouseCases =2, InHouseMinutes=419, OutPatientCases =16, OutPatientMinutes=1230. This corresponds to the new data I can see in the XML column; 2.000000000000000e+000 is indeed 2 and 4.190000000000000e_002 is indeed 419.
I'm using MS SQL 2000 with enterprise manager I have a customers table called high_customer, it has a primary key called IDI have an invoices table called high_invoices, it has no primary keys but it does have a column for customer ID.I want to set it so if a customer is deleted from the customers table, any invoices with that customerID are deleted from the invoices table.Do I need to specify a constraint? If so how do I do it in enterprise manager.Thanks
View 1 Replies View RelatedHi,
I have the following problem:
I have a table called Jobs with the fields:
JobNumber, Name, Customer, ...
And a table called Customers with the fields:
ID, Name, Address, ...
Obviously Jobs is linked to Customers with the Customer<->ID fields. I want to set it up so that if a Customer is deleted, then any Jobs that had that customer listed now have the Customer field set to NULL. Can I do this with a constraint, or will I need to use a trigger?
Cheers,Little'un
Hello,
I am not a DBA and I need to do the following.
I have 2 tables A and C and both have a common fileds say emp.Emp is pkey in C .
There can be a record in C but not in A.If a record is inserted in A then it checks for the same employee info in C .If not found it do not allow to insert a record in A.
How to go for it?
Thanks!
Hiya peops!!
Listen i was wondering if anyone could tell me whether they know the correct syntax for creating constraints or where i could find it on the net???
Thanks
Hiya peops
im creating a constraint using enterprise manager for 1 of my tables n was wondering how u constructively create a constraint expression, there is a specific style,right??
Thanks
hi there,
i have added my tables and defined foreig keys and primary keys for my table, but when i try to put the data it gives me some error reagards to parent key..and it wont let me drop the table... can anybody tell me how to drop the foregin key..i have tried (
ALTER TABLE module DROP CONSTRAINT ATTENDANCEID_FK;)
this formula and it wont work,
heres my tables and relationships:
CREATE TABLE ATTENDANCE
(ATTENDANCEID char(4) NOT NULL,
StudID char(4) NOT NULL,
ModuleID char(4) NOT NULL,
Week1 VARCHAR(10),
Week2 VARCHAR(10),
Week3 VARCHAR(10),
Week4 VARCHAR(10),
Week5 VARCHAR(10),
Week6 VARCHAR(10),
PRIMARY KEY (ATTENDANCEID));
ALTER TABLE ATTENDANCE
ADD FOREIGN KEY (studID) REFERENCES student(studID);
ALTER TABLE ATTENDANCE
FOREIGN KEY (moduleID) REFERENCES module(moduleID));
insert into ATTENDANCE values
('F1','A1','E1','Yes','Yes','Yes','Yes','Yes','Yes');
insert into ATTENDANCE values
('F2','A2','E2','Yes','No','Yes','Yes','No','Yes');
insert into ATTENDANCE values
('F3','A3','E2','Yes','Yes','Yes','No','Yes','Yes');
insert into ATTENDANCE values
('F4','A4','E2','Yes','Yes','Yes','Yes','No','Yes');
insert into ATTENDANCE values
('F5','A5','E1''Yes','Yes','No','Yes','Yes','Yes');
insert into ATTENDANCE values
('F6','A6','E2','Yes','Yes','Yes','Yes','Yes','No');
insert into ATTENDANCE values
('F7','A7','E1','Yes','Yes','Yes','Yes','No','No');
insert into ATTENDANCE values
('F8','A8','E2','Yes','Yes','Yes','No','Yes','Yes');
insert into ATTENDANCE values
('F9','A9','E3','Yes','Yes','No','Yes','Yes','Yes');
CREATE TABLE MODULE
(ModuleID char(4) NOT NULL,
ATTENDANCEID char(4) NOT NULL,
ModuleName varchar(45),
ModuleCode varchar(6),
PRIMARY KEY (ModuleID));
ALTER TABLE MODULE
ADD FOREIGN KEY (attendanceID) REFERENCES attendance(attendanceID);
insert into MODULE values
('E1','F1','Workshop Research and Project Implementation','Im3023');
insert into MODULE values
('E2','F2','Advanced Database Development','SD3042');
insert into MODULE values
('E3','F3','Advacned Information Systems Develpment','SD3043');
charles
I am fairly new at SQL and also new to this forum. So I don't know if this topic belongs here or not.
But anyways, I found this tutorial online. However, I am having trouble completing it. Can someone please help me?
Given the following table definitions:
CREATE TABLE USERS
(
USERID CHAR(5) PRIMARY KEY,
NAME VARCHAR(30),
RATING CHAR(1) CHECK (RATING IN (A, B,C,D)
)
CREATE TABLE ITEMS
(
ITEM_NO NUMBER PRIMARY KEY,
DESCRIPTION VARCHAR(50),
OFFERED_BY CHAR(5) REFERENCES USERS(USERID) ON UPDATE CASCADE ON DELETE CASCADE,
START_DATE DATETIME,
END_DATE DATETIME,
RESERVE_PRICE NUMBER
)
CREATE TABLE BIDS
(
USERID CHAR(5) REFERENCES USERS ON UPDATE CASCADE ON DELETE SET NULL,
ITEMNO NUMBER REFERENCES ITEMS(ITEM_NO) ON UPDATE CASCADE ON DELETE CASCADE,
BID NUMBER,
BID_DATE DATETIME,
PRIMARY KEY(USERID,ITEMNO,BID_DATE)
)
Directions: Indicate whether the statement is accepted or rejected; and if accepted indicate its effects. Evaluate each statement INDEPENDENTLY.
1) INSERT INTO ITEMS VALUES(1009, Red Bicycle,U01,1999-01-08, 1999-02-10, 30)
2) UPDATE ITEMS SET ITEMNO=1008 where ITEMNO=1001
3) DELETE FROM ITEMS WHERE ITEMNO=1005
4) INSERT INTO ITEMS VALUES(1010, Green Bicycle,U07,1999-01-08, 1999-02-10, 30)
5) UPDATE BIDS SET ITEMNO=1011 WHERE ITEMNO = 1001
6) DELETE FROM USERS WHERE USERID=U01
7) UPDATE ITEMS SET ITEMNO=1020 WHERE ITEMNO=1001
8) DELETE FROM BIDS WHERE BID > 1001
Thanks. I would greatly appreciate your help.
My table structure is something like this :
ORDER_ITEM (OrderSK, ItemNumber, Qty, ServiceSK, UnitPrice)
SERVICE (ServiceSK, Description, UnitPrice)
How could I modify the database structure to enforce the data constraint that ORDER_ITEM.UnitPrice must be equal to SERVICE.UnitPrice for the corresponding service.