How To Writing CLR Store Procedure In C# Using SQLSERVER2005
Feb 19, 2008
hi,
i am new in asp.net.
.i have used sqlserver2005.
in VS2005 file->new project->visual c#->Databse then select sqlserver project templates and click ok..
it shows new database reference dialog box
in that i selected server name,use sqlserver authentication and database file.
then click ok butoon it will shows the error that is
"
The Sql Server specified by this connection properties does not support managed objects.please choose another Sql server"
suppose if u not able to understand above steps please refer this link
http://www.sqlteam.com/article/writing-clr-stored-procedures-in-charp-introduction-to-charp-part-1
please don't mistake me..
thanks
View 1 Replies
ADVERTISEMENT
May 12, 2007
hi
COMPUTER-1
IP ::::: 129.100.100.5
COMPUTER NAME IS ::::: HASH
MEMBER OF DOMAIN
in this computer sqlserver express edition is installed, i want to remove this express becoz in configuration manager it show two SQLSERVER'S are running. when i browse from COMPUTER - 2 for network servers it show server name as HASH/SQLEXPRESS, but not the main SQLSERVER.
COMPUTER -2
IP::::129.100.100.142
COMPUTER NAME::: FEROZ
MEMBER OF WORKGROUP
can anyone help me how to connect these two computers and remove this express edition
iam new to sqlserver configuration
thanks in advance
waiting for eager reply
View 1 Replies
View Related
Aug 30, 2007
I have been using SQL Server 2000 and creating Stored Procedure. I need these Stored Procedure to create Reports in Crystal Reports.
In SQL Server 2000: it is very simple to create a stored procedure: Go to Enterprise Manager->Databases-> Choose a database-> stored procedure->New-> Simply Add to the following syntax:
CREATE PROCEDURE [OWNER].[PROCEDURE NAME] AS
GO
My problem is that it is More Complex to use Stored Procedure In SQL Server 2005:
the stored procedure is under Databases->choose a database->programmability->create new stored procedure: But how can I use it: I need your help
It is more complex than the Stored Procedure in SQL Server 2000
Thank you
Your help is highly appreciated
View 8 Replies
View Related
Nov 13, 2006
I know I can call store procedure from store procedure but i want to take the value that the store procedure returned and to use it:
I want to create a table and to insert the result of the store procedure to it.
This is the code: Pay attention to the underlined sentence!
ALTER PROCEDURE [dbo].[test]
AS
BEGIN
SET NOCOUNT ON;
DROP TABLE tbl1
CREATE TABLE tbl1 (first_name int ,last_name nvarchar(10) )
INSERT INTO tbl1 (first_name,last_name)
VALUES (exec total_cash '8/12/2006 12:00:00 AM' '8/12/2006 12:00:00 AM' 'gilad' ,'cohen')
END
PLEASE HELP!!!! and God will repay you in kind!
Thanks!
View 7 Replies
View Related
Dec 20, 2007
I'm developing a library and want to display the alphabets across the screen. When a user clicks on one of the alphabets I want all titles beginning with that letter to appear on the screen.
How would I write this stored procedure?
My table is called Titles
Fields: Title ID Titles
Thanks!
View 2 Replies
View Related
Feb 2, 2008
How would I write a stored procedure to get * where duedate is lessthan and not equal to today's date. Is this right?select * from librarywhere duedate < != getdate()Thanks
View 2 Replies
View Related
Oct 30, 2007
hi,
i am new to this.
in my aspx page, i am having a dropdown which has two value
Name
EmpID
if user clicks on name from drop down, user has enter the name of employee in a textbox. And if user clicks on EmpID, he has to enter the employee ID in textbox.
Based on selection the data will be displayed in grid view.
In my database, i have a table called EmpInfo, which has three fields - EmpName, EmpID and State.
can anybody help me in writing a stored procedure for this??
Thanks
Jaimin
View 3 Replies
View Related
Jul 7, 2006
Hi,
I am working on an application in ASP.NET 1.1 and SQL Server 2005 as database.I wanted to use SQLCLR feature of SQL Server 2005. Is it possible that i write Stored Procedures in C# 1.1 and deploy on SQL Server 2005? as it is in case of C# 2.0.
Please refer some good tutorial for it.
Regards,Imran Ghani
View 1 Replies
View Related
Aug 13, 2007
Hi Guys,
I need some help and suggestion to rewrite one of my screens (using ASP.NET) which is using stored procedure. The processing on this screen is taking more than 3 minutes (which i know is totaly
unacceptable). I am making use of cursors within the stored procedure (SQL Server 2005). I really intend to get rid of cursors as they have their performance hit. I have been told to rewrite this screen
(or the stored procedure) so i need some help for SQL Gurus. Following are the details:
1. This is a Monthly Employee Attendance Report on a day by day basis for any given month (maximum 31 days in a month)
2. The values (for each day) have to be computed at runtime and not stored. e.g. Since an employee may have signed in/out several times in a day
3. There are around 500 employees data im dealing with
4. The user will select any given department and employee's data for the respective department has to be displayed for any given month
5. If the user selects [All Department], the entire 500 employees have to be displayed on the screen
6. This report will look like an excel report on the screen i.e. Employee's basic info and record of 31 days (maximum days in a month) are displayed in one row for each employee
7. This report involves are 7-8 tables. 7 tables are for employees basic info whereas one table has the attendance record
Kindly give me your suggestion on writing the SQL stored procedure. I cannot use any other option such as a real Excel Sheet or anything. I need suggestion on how to write this monthly report. By the
way, we dont intend to Cache the data since the report can be viewed at anytime of the day, so fresh data is required everytime. Also the data for 500 employees may be too much to be cached. Also in
the attendance table, we are dealing with approximately half a million attendance records.
Thanks and waiting for your suggestions...
View 7 Replies
View Related
Mar 7, 2005
I am trying to write a stored procedure which would execute following logic:
- The stored procedure takes 2 optional parameters @StartDate and @EndDate
@StartDate Datetime = null
@EndDate Datetime = null
- Since the parameters are optional user can enter either one or can leave both blank.
- If user doesnot enter any values for SD (start date) and ED (end date), stored procedure should run select query replacing those values with wildcard character '%' or NULL
- If user enters SD, query should use @StartDate as the SD and GetDate() as the ED
- If user enters ED, query should use @EndDate as the ED and MIN() of the Date field as SD
I was able to write query which did almost everything as is stated above expect for incorporating NULLs
The query is as below
CREATE PROCEDURE SearchDocumentTable
@FName varchar(100) = null,
@LName varchar(25) = null,
@ID varchar(9) = null,
@StartDate Datetime = null,
@EndDate Datetime = null
AS
IF ( @StartDate IS NULL)
Select @StartDate = MIN(DateInputted) from Document
Select
FName as 'First Name',
LName as 'Last Name',
ID as 'Student ID',
Orphan as 'Orphan',
DocumentType as 'Document Type',
DocDesc as 'Description of the Document',
DateInputted as 'Date Entered',
InputtedBy as 'Entered by'
From Document,DocumentTypeCodes
Where FName LIKE ISNULL(@FName,'%')
AND LName LIKE ISNULL(@LName,'%' + NULL)
AND ID LIKE ISNULL(@ID,'%' + NULL)
AND (DateInputted BETWEEN @StartDate AND ISNULL(@EndDate,GETDATE()) OR DateInputted IS NULL)
AND Document.DocTypeCode = DocumentTypeCodes.DocTypeCode
GO
Any help would be appreciated
Thanks in advance :)
View 7 Replies
View Related
Sep 26, 2013
Want to write from a table variable to a text file from a stored procedure.Read about xp_cmdshell bcp etc. but worried because it's supposed to be a security problem and needs to be from a permanent database.Also am getting error "The EXECUTE permission was denied on the object 'xp_cmdshell'..."
1. Is xp_cmdshell a bad idea to use even if I get permissions ?
2. Can a "permanent" table be used in a stored procedure starting out fresh each time with 0 rows rather than use a table variable ?
View 2 Replies
View Related
Mar 29, 2006
hi
Writing to text file from table/view is done using osql,bcp etc. How do we write output of stored procedure into text file??
Thank you
View 4 Replies
View Related
Aug 7, 2007
Was wondering which is better, writing the SQL code within the execute SQL task or calling a SP from within it with respect to performance? and what is the best practice? Also is there any way to incoporate the logic of a cursur within SSIS?
Thanks
View 3 Replies
View Related
Mar 29, 2007
Hi Everybody,
I am trying to update a column Percentage in a table named Critical Doctors with a column named
PercentTime from tblPercent table, Where the column Doctor matches with any DoctorId from
tblPercent.
I am getting an error message for the following query.
Have Two tables
1.CriticalDoctors
2.tblPercent
update CriticalDoctors set Percentage =
(select PercentTime from tblPercent)
where CriticalDoctors.Doctor = (select DoctorId from tblPercent)
Server: Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <=
, >, >= or when the subquery is used as an expression.
The statement has been terminated.
Pls give me reply on how to write a stored procedure so that I can equate the percentage column
with one value and also check the condition with one value.
Thanking you guys in advance.
madhav
View 4 Replies
View Related
Feb 26, 2015
Any way to have a process run that will not write its changes to the transaction log? I have a process that runs every three hours and has a huge impact on the transaction log (it becomes larger than the database itself). We do hourly backups of the transaction log and normally it is reasonably sized but when this process runs, it gets HUGE.
The process takes source data, massages it and writes it to summary tables. It is not something we need to track as we can recreate the summary tables if needed and it has no impact on the source tables.
Everything is driven through a stored procedure. Is there a way to run a stored procedure and tell it that nothing it does should be written to the transaction log?
View 6 Replies
View Related
Nov 20, 2013
My store Procedure is not save in Strore Procedure folder at the time of saving it give me option to save in Project folder and file name default is SQLQuery6.sql when i save it after saving when i run my store procedure
exec [dbo].[SP_GetOrdersForCustomer] 'ALFKI'
I am getting below error :
Msg 2812, Level 16, State 62, Line 1
Could not find stored procedure 'dbo.SP_GetOrdersForCustomer'.
View 13 Replies
View Related
May 15, 2007
hi,
i am a nubie, and struggling with the where clause in my stored procedure. here is what i need to do:
i have a gridview that displays records of monthly view of data. i want the user to be able to page through any selected month to view its corresponding data. the way i wanted to do this was to set up three link buttons above my gridview:
[<<Prev] [Selected Month] [Next>>]
the text for 'selected month' would change to correspond to which month of data was currently being displayed in the gridview (and default to the current month when the application first loads).
i am having trouble writing the 'where' clause in my stored procedure to retrieve the selected month and year.
i am using sql server 2000. i read this article (http://forums.asp.net/thread/1538777.aspx), but was not able to adapt it to what i am doing.
i am open to other suggestions of how to do this if you know of a cleaner or more efficient way. thanks!
View 2 Replies
View Related
May 30, 2008
suppose,the type of the stored procedure's paramters is varchar .I hate to add parameterNames and types.If i can read the string of the stored procedure the get the paramterNames by operating text?
public void storeOperate(string stringParameter,string name) { string[] strs=stringParameter.Split('&'); SqlConnection conn = new SqlConnection(getConnectionString.getconnectionString()); SqlCommand cmd=new SqlCommand(name,conn); cmd.CommandText=name; cmd.CommandType=CommandType.StoredProcedure; foreach(string str in strs) { cmd.Parameters.Add(".....",SqlDbType........).Value=str; //my trouble } conn.Open(); cmd.ExecuteNonQuery(); conn.Close(); cmd.Dispose(); }
View 2 Replies
View Related
Feb 17, 2008
Hi guysi would really appreciate your help here. what am i doing wrong with this stored procedure ALTER PROCEDURE usp_CreateNewCustomer( @LName as varchar(50), @FName as varchar(50), @Dept as varchar(50)=NULL, @PhoneType as varchar(50)=NULL, @Complete as Bit=NULL, @CustomerID as Int OUTPUT, @FaxModel as varchar(50)=NULL, @FaxNumber as varchar(50)=NULL, )ASINSERT INTO [CustomerInfo] ([LName], [FName], [Dept], [PhoneType], [Complete]) VALUES (@LName, @FName, @Dept, @PhoneType, @Complete)SELECT SCOPE_IDENTITY()INSERT INTO Extras (CustomerID, FaxModel, FaxNumber) VALUES (@CustomerID, @FaxModel, @FaxNumber)RETURN It keeps on complaning "'usp_CreateNewCustomer' expects parameter '@CustomerID', which was not supplied."thanks
View 4 Replies
View Related
Feb 28, 2008
Hi all,
I have a few question regarding SPROC. Firstly, I want to create a sp, that will return a multiple column of data, how do you achieve that. Secondly, I want to create a store procedure that will return a multiple columns in a cursor as an output variable. Any help will be much appreciated. Can you have more then 1 return parameters???
Thanks.
Kabir
View 2 Replies
View Related
Mar 5, 2008
I have asp.net web application which interface with SQL server,
I want to run store procedure query of SQL using my asp.net application.
How to declare connectons strings, dataset, adapter etc to run my store procedure resides in sql server.
for Instance Dim connections as string,
Dim da as dataset, Dim adpt as dataadapter. etc
if possible , then show me completely code so I can run store procedure using my button click event in my asp.net application
thank you
maxmax
View 2 Replies
View Related
Apr 11, 2005
I am not sure if it is right place to ask the question. I have a store procedure in which funcitons are called and several temp tables are created. When I use sql analyzer, it runs fast. But when I called it from asp.net app, it runs slow and it waits and waits to get data and insert into temp tables and return. Though I have used with (nolock), it still not imprvoed. Any suggestions? Thanks in advance.
NetAdventure
View 1 Replies
View Related
Jun 8, 2006
Hello, I am very new to ASP.NET and SQL Server. I am a college student and just working on some project to self teaching myself them both. I am having a issue. I was wondering if anyone could help me.
Ok, I am creating a web app that will help a company to help with inventory. The employee's have cretin equipment assign to them (more then one equipment can be assigned). I have a search by equipment and employee, to search by equipment the entire database even then equipment that isn't assigned with the employee's it shows only that employees and if they have any equipment. They can select a recorded to edit or see the details of the record. The problem i am having is that the Info page will not load right. I am redirected the Serial Number and EmployeeID to the info page. I got everything working except one thing. If a person has more then one equipment when i click on the select it redirect and only shows the first record not the one I selected. and when i change it, a employee that doesn't have equipment will not show up totally.
SELECT E.FirstName AS UserFirstName, E.LastName AS UserLastName, eqtype.Description AS UserEquipType, empeq.UserEquipID, E.EmployeeID, E.cwopa_id, eq.IPAddress, eq.Location, eq.DataLine3, eq.DataLine2, eq.Voice, eq.DataLine1, eq.FloorBox, eq.Comments, eq.SerialNo, eq.Model, eq.Brand, eq.TagNo, eq.PurchaseLease, eq.WarrantyExpDate, eq.PhoneType, eq.PhoneNum, eq.CellNumber, eq.DataNumber, eq.SIDNumber, eq.Carrier
FROM dbo.EMPLOYEES AS E LEFT OUTER JOIN dbo.EMPLOYEES_EQUIP AS empeq ON empeq.EmployeeID = E.EmployeeID LEFT OUTER JOIN dbo.EQUIPMENT AS eq ON eq.EquipID = empeq.EquipID LEFT OUTER JOIN dbo.EQUIP_TYPE AS eqtype ON eqtype.EquipTypeID = eq.EquipTypeID WHERE E.EmployeeID = @EmployeeID and eq.SerialNo=@SerialNo
EmployeeID and SerialNo are primary keys.
I was thinking maybe create a store procedures, but I have no idea how to do it. I created this and no syntax error came up but it doesn't work
CREATE PROCEDURE dbo.inventoryinfo AS
DECLARE @EmployeeID int DECLARE @SerialNo varchar(50)
IF( @SerialNo is NULL)
SELECT E.FirstName AS UserFirstName, E.LastName AS UserLastName, eqtype.Description AS UserEquipType, empeq.UserEquipID, E.EmployeeID, E.cwopa_id, eq.IPAddress, eq.Location, eq.DataLine3, eq.DataLine2, eq.Voice, eq.DataLine1, eq.FloorBox, eq.Comments, eq.SerialNo, eq.Model, eq.Brand, eq.TagNo, eq.PurchaseLease, eq.WarrantyExpDate, eq.PhoneType, eq.PhoneNum, eq.CellNumber, eq.DataNumber, eq.SIDNumber, eq.Carrier
FROM dbo.EMPLOYEES AS E LEFT OUTER JOIN dbo.EMPLOYEES_EQUIP AS empeq ON empeq.EmployeeID = E.EmployeeID LEFT OUTER JOIN dbo.EQUIPMENT AS eq ON eq.EquipID = empeq.EquipID LEFT OUTER JOIN dbo.EQUIP_TYPE AS eqtype ON eqtype.EquipTypeID = eq.EquipTypeID WHERE E.EmployeeID = @EmployeeID
ELSE
SELECT E.FirstName AS UserFirstName, E.LastName AS UserLastName, eqtype.Description AS UserEquipType, empeq.UserEquipID, E.EmployeeID, E.cwopa_id, eq.IPAddress, eq.Location, eq.DataLine3, eq.DataLine2, eq.Voice, eq.DataLine1, eq.FloorBox, eq.Comments, eq.SerialNo, eq.Model, eq.Brand, eq.TagNo, eq.PurchaseLease, eq.WarrantyExpDate, eq.PhoneType, eq.PhoneNum, eq.CellNumber, eq.DataNumber, eq.SIDNumber, eq.Carrier
FROM dbo.EMPLOYEES AS E LEFT OUTER JOIN dbo.EMPLOYEES_EQUIP AS empeq ON empeq.EmployeeID = E.EmployeeID LEFT OUTER JOIN dbo.EQUIPMENT AS eq ON eq.EquipID = empeq.EquipID LEFT OUTER JOIN dbo.EQUIP_TYPE AS eqtype ON eqtype.EquipTypeID = eq.EquipTypeID WHERE E.EmployeeID = @EmployeeID and eq.SerialNo=@SerialNoGO
Also, when a user selects the select button in either Employee search or Equipment search it redirects them to info.aspx. Should I create a different aspx page for both? But I don't believe I should do that. I don't know if I gave you enough information or not. But if you could give examples that would be wonderful! Thanks so much Nickie
View 1 Replies
View Related
Aug 30, 2000
I want to know when does SQL flushes Store Procedure from the cache.
Thank You,
Piyush Patel
View 1 Replies
View Related
Dec 10, 2004
Hi, All,
I need to write a sales report which needs to seperate total from direct sale and agentsale. The report looks like this( in the table of query,we have agentnumber, productname, sales, month
Month salefromagent directsale total
Jan 1100 2300 3400
Feb 800 500 1300
..........
Dec
---------------------------------
I know we can handle this in the program use two queries.
But is there a way to do it use store procedure and then pass the result of store procedure to the ASP program. I am trying to write my first store procedure, thanks for any clue.
Betty
View 1 Replies
View Related
Nov 1, 2005
Hi all,
I need to write a sales store procedure.
The sales summary is basically group by agentCode.
But the problem is some agents have subagents.
i.e., in the sales table.
one agent 123456 has many subagents whose agentCode start with 17. And I want to group sales for all subagents who have agentCode 17XXXX to agent 123456's sales.
what should I do in the store procedure.
Thanks
Betty.
View 2 Replies
View Related
Jan 14, 2005
I am trying to create a store procedure that look at a table and only maintain 30 worth of data only forever. The data that fall outside the 30 days need to be deleted. Can anyone help me with this?
Thanks
Lystra
View 5 Replies
View Related
Feb 22, 2006
I would like to create a employee store procedure to insert a record and mean while i can retrieve the EmployeeID for the record just inserted. Can you show me how to create a store procedure like this. Now i have a insert store procedure in the following:
CREATE PROCEDURE AddEmployee
(@efname nvarchar(20),
@elname nvarchar(20)
)
AS
insert into tblEmployeeName
(EmployeeFName, EmployeeLName)
values (@efname,@elname)
GO
Thanks.
View 5 Replies
View Related
Mar 13, 2006
I created a batch file to run a DTS saved as a STRUCTURED STORE FILE. Works fine on the command promt.
Can I use a SPROC to call something like a shell command to execute that batch file? If yes, how is this be possible?
Thanks
View 2 Replies
View Related
Apr 20, 2004
This is an Oracle store procedure. Can Any body help me to convert it into SQL Server stored Procedure
PROCEDURE CALC_PERC (DB_ID IN NUMBER, LAT_TYPE IN CHAR) IS
Tot_work_all number(12,2);
Bid_tot number(12,2);
Ewo number(12,2);
Overruns number(12,2);
Underruns number(12,2);
Contr_tot_all number(12,2);
sContractType ae_contract.contr_type%type;
BEGIN
select sum(nvl(tamt_ret_item,0) + nvl(tamt_paid_item,0))
into Tot_work_all
from valid_item
Where db_contract = db_id;
Select sum(Contq * Contr_Price) into Bid_tot
From Valid_item
Where nvl(New_Item,'N') <> 'Y'
and db_contract = db_id;
Select sum(Qtd * Contr_price) into Ewo
From Valid_item
Where nvl(New_item,'N') = 'Y'
and db_contract = db_id;
Select Sum((Qtd-Nvl(Projq,0))*Contr_Price) into Overruns
From Valid_item
Where Qtd > Nvl(Projq,0)
and db_contract = db_id
and nvl(New_Item,'N') = 'N';
IF LAT_type <> 'R' THEN
Select Sum((Nvl(Projq,0)-Contq) * Contr_Price) into Underruns
From Valid_item
Where Nvl(Projq,0) < Contq
and db_contract = db_id
and nvl(New_Item,'N') = 'N';
ELSE
Select Sum((Nvl(Qtd,0)-Contq) * Contr_Price) into Underruns
From Valid_item
Where Nvl(Qtd,0) < Contq
and db_contract = db_id
and nvl(New_Item,0) = 'N';
end if;
Contr_tot_all:= NVL(Bid_tot,0) +NVL(ewo,0) +NVL(overruns,0)
+NVL(underruns,0);
IF Contr_tot_all = 0 THEN
Select Contr_type into sContractType from ae_contract where db_contract = db_id;
IF sContractType = 'A' OR sContractType = 'T' THEN
--If the divisor is zero here, it's not an error.
update ae_contract set perc_compu = 0 where db_contract = db_id;
ELSE
--If the divisor is zero here, it would be an error
update ae_contract set perc_compu = 100 * tot_work_all/contr_tot_all where db_contract = db_id;
END IF;
Else
--Here we have a real number to calculate, so go ahead and do your stuff!
update ae_contract set perc_compu = 100 * tot_work_all/contr_tot_all where db_contract = db_id;
END IF;
END;
View 1 Replies
View Related
Apr 4, 2008
1. can a stored procedure call itself? if else how ?>
2. how to run a job for a stored procedure to exucte every day.
View 2 Replies
View Related
Apr 17, 2006
hello
iam new to store procedures.can anyone tell me how do i put in this sql statement into store procedure
SELECT * FROM PortMaster WHERE PortCode= '" & Request.QueryString("PortCode") & "' "
TheProblem is coming in ,how do i put "Request.QueryString("PortCode")" into sql queranalyzer.iam using this in .aspx page.
depending on querystring the record is selected.
View 13 Replies
View Related
Apr 20, 2006
hello
iam using store procedure to open the the selected rows in datagrid into Excel.but iam getting blank spreadsheet.the querystrings are getting passed but the rows turn out to be blank.
if i do not use store procedure than everything is ok.the querystring contains multiple strings so as to display it in excel.
the stroe procedure is
CREATE PROCEDURE Employee_ExcelDisplayHO(@ID varchar(100))
AS
SELECT * FROM employee_master WHERE empuser_id IN (@ID)
and this is the statement that i use in my .aspxpage to call store procedure
Dim Cmd As New SqlDataAdapter("Employee_ExcelDisplayHO", myconn)
cmd.SelectCommand.CommandType = CommandType.StoredProcedure
cmd.SelectCommand.Parameters.Add(New SqlParameter("ID", SqlDbType.VarChar, 100))
cmd.SelectCommand.Parameters("@ID").Value = Request.QueryString("ID")
any suggestions wht may be wrong
View 3 Replies
View Related
