Howto Get Avoid Bulk Insert Data Conversion Error?
Aug 7, 2006
hi, i having a problem in bulk insert , which is regard the text file that
to insert into database, when insertion processing,
if my textfile have NULL value, it give me Bulk insert data conversion error
for example in my text file c:mytest.txt , it contains data NULL
123 studentname NULL
can we let bulk insert detect NULL value ?
i have try on putting "KEEPNULLS" , but it doesn't help , caused some fields in table may in datetime type
BULK INSERT [mytable] FROM c:mytest.txt WITH (FIELDTERMINATOR = '' '', ROWTERMINATOR = ''
'', KEEPNULLS )'
thank you
View 4 Replies
ADVERTISEMENT
Jun 29, 2015
I'm trying to use Bulk insert for the first time and getting the following error. I think it might have something to do with my Format File and from the error msg there's a conversion error for the first column. In my database the Field is nvarchar(6) so my best guess is to use SQLNChar for the first column. I've checked the end of each line is CR LF therefore the is correct for line 7 right?
Msg 4863, Level 16, State 1, Line 1
Bulk load data conversion error (truncation) for row 1, column 1 (ASXCode).
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
BULK
INSERTtbl_ASX_Data_temp
FROM
'M:DataASXImportTest.txt'
WITH
(FORMATFILE='M:DataASXSQLFormatImport.Fmt')
[code]...
View 5 Replies
View Related
Jan 17, 2008
Im having some issues with bulk insert.
This is the table:
CREATE TABLE [dbo].[tmp_GA_status](
[GA_recno] [int] NOT NULL,
[GA_desc] [varchar](40) NULL
)
This is the file (unicode):
1|"test1"
2|"test2"
3|"test3"
4|"test4"
5|"test5"
6|"test6"
7|"test7"
8|"test8"
and this is the sql:
bulk insert tmp_GA_status from 'C: empTextDumpGA_status.dta'
with (CODEPAGE='RAW', FIELDTERMINATOR='|', ROWTERMINATOR='
', DATAFILETYPE='widechar')
so yeah, pretty simple. But whatever I do I get this;
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 2 (GA_desc).
So what am I doing wrong ?
View 13 Replies
View Related
Dec 4, 2006
hi
"Bulk insert data conversion error (truncation) for row 1, column 1 (id)."
when you get the error above or similar in sql server 2000 does it continue inserting the data by truncating it or does it stop beacause looking at the data that i have got it seems to continue inserting the data but just truncates the colunm. i have tried it several time its seeems to be consistent.
I have data that has white spaces after the actual data e.g. '00093 ' hence i am happy aslong as i can be sure that it does always continue as i will be loading alot of data using a similar process.
hence my question is that will it load all the data all the time and just truncate it to fit the column size?
View 7 Replies
View Related
Sep 27, 2004
Hi,
Iam trying to import data from a csv file into my table in SQL Server 2000. My table is called as temp_table and consists of 3 fields.
column datatype
-------- -----------
program nvarchar(20)
description nvarchar(50)
pId int
pId has been set to primary key with auto_increment.
My csv file has 2 columns of data and it looks like follows:
program, description
"prog1", "this is program1"
"prog2", "this is program2"
"prog3", "this is program3"
Now i use BULK INSERT like this
"BULK INSERT ord_programs FROM 'C:datafile.csv' WITH (FIELDTERMINATOR=',', ROWTERMINATOR='', FIRSTROW=2)"
to import data into my table in SQL server and it gives me this error
"Bulk insert data conversion error (type mismatch) for row 2, column 3 (pId)"
I guess i have to use fileformat or something since i dont have anything for pId field in the csv file to make it work...
Please help me out guys and please post a snippet of code if you have.
Thank You.
View 2 Replies
View Related
Aug 7, 2006
hi, good day,
if i would like to pass a parameter into store procedure for bulk insert command as below
BULK INSERT [mytable] FROM
@FILE_PATH
WITH (FIELDTERMINATOR = ' ', ROWTERMINATOR = '')
howto i put @FILEPATH in above query inside store procedure ?
thanks for guidance :)
View 2 Replies
View Related
Jul 13, 2007
hello,
I am working on an application that will import data from ascii tab-delimited files into corresponding tables in a sql server 2005 express db.
The problem I am facing is that i get errors when running bulk insert.
The tables all have one extra column which is a primary key identity value.
Additionaly, the column data types include:
int, bigint, nchar, nvarchar, datetime and bit
an example table looks like this:
CREATE TABLE [dbo].[counties](
[id] [int] IDENTITY(1,1) NOT NULL,
[InternalID] [int] NULL,
[Active] [bit] NULL,
[Code] [nchar](10) COLLATE Greek_CI_AS NULL,
[Description] [nvarchar](50) COLLATE Greek_CI_AS NULL,
[StartDate] [datetime] NULL
)
An example data file looks like this:
InternalIDActiveCodeDescriptionDate
1 101Αι�„�‰Î»Î¿Î±ÎºÎ±��ν16/11/1909
2 102Α��γολίδο�‚29/04/1949
3 103Α��καδία�‚16/11/1909
4 104Ά���„η�‚ 16/11/1909
5 105Α�„�„ική�‚ 26/07/1943
So, what I do is:
1. for each table I generate a character format file with the following command:
bcp mydb..table format nul -f tableformat.fmt -c -T -S hostsqlexpress
2. I modify the format file to exclude the first identity column by zeroing the field length, the column order and terminator. The resulting format file looks like this:
9.0
6
1 SQLCHAR 0 0 "" 0 id ""
2 SQLCHAR 0 12 " " 2 InternalID ""
3 SQLCHAR 0 3 " " 3 Active ""
4 SQLCHAR 0 20 " " 4 Code Greek_CI_AS
5 SQLCHAR 0 100 " " 5 Description Greek_CI_AS
6 SQLCHAR 0 24 " " 6 StartDate ""
3. I run BULK INSERT
BULK INSERT tablename
FROM dataFile
WITH (
FIRSTROW=2,
FORMATFILE = formatFile
DATAFILETYPE = 'char'
FIELDTERMINATOR=' '
ROWTERMINATOR='
'
KEEPNULLS
)
As a result of the above configuration I get this:
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 2, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 3, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 4, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 5, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 6, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 7, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 8, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 9, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 10, column 6 (EndDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 11, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 12, column 6 (EndDate).
Msg 4865, Level 16, State 1, Line 1
Cannot bulk load because the maximum number of errors (10) was exceeded.
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
What am I doing wrong here? With previous configurations I got errors about the BIT fields. In general, I only receive errors... The only thing that worked was with a table that only had nvarchar. Is there a fundamental mistake in what i do? I have read many posts, but nothing specific about handling different data types with bcp and bulk insert.
I would appreciate any help, as I am running out of time
Thank you.
Dimitris Chrysomallis
View 4 Replies
View Related
Jul 13, 2007
Hello,
I am working on an application that will import data from ascii tab-delimited files into corresponding tables in a sql server 2005 express db.
The problem I am facing is that i get errors when running bulk insert.
The tables all have one extra column which is a primary key identity value.
Additionaly, the column data types include:
int, bigint, nchar, nvarchar, datetime and bit
an example table looks like this:
CREATE TABLE [dbo].[counties](
[id] [int] IDENTITY(1,1) NOT NULL,
[InternalID] [int] NULL,
[Active] [bit] NULL,
[Code] [nchar](10) COLLATE Greek_CI_AS NULL,
[Description] [nvarchar](50) COLLATE Greek_CI_AS NULL,
[StartDate] [datetime] NULL
)
An example data file looks like this:
InternalIDActiveCodeDescriptionDate
1 101Αι�„�‰Î»Î¿Î±ÎºÎ±��ν16/11/1909
2 102Α��γολίδο�‚29/04/1949
3 103Α��καδία�‚16/11/1909
4 104Ά���„η�‚ 16/11/1909
5 105Α�„�„ική�‚ 26/07/1943
So, what I do is:
1. for each table I generate a character format file with the following command:
bcp mydb..table format nul -f tableformat.fmt -c -T -S hostsqlexpress
2. I modify the format file to exclude the first identity column by zeroing the field length, the column order and terminator. The resulting format file looks like this:
9.0
6
1 SQLCHAR 0 0 "" 0 id ""
2 SQLCHAR 0 12 " " 2 InternalID ""
3 SQLCHAR 0 3 " " 3 Active ""
4 SQLCHAR 0 20 " " 4 Code Greek_CI_AS
5 SQLCHAR 0 100 " " 5 Description Greek_CI_AS
6 SQLCHAR 0 24 " " 6 StartDate ""
3. I run BULK INSERT
BULK INSERT tablename
FROM dataFile
WITH (
FIRSTROW=2,
FORMATFILE = formatFile,
DATAFILETYPE = 'char',
FIELDTERMINATOR=' ',
ROWTERMINATOR='
',
KEEPNULLS
)
As a result of the above configuration I get this:
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 2, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 3, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 4, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 5, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 6, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 7, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 8, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 9, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 10, column 6 (EndDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 11, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 12, column 6 (EndDate).
Msg 4865, Level 16, State 1, Line 1
Cannot bulk load because the maximum number of errors (10) was exceeded.
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
What am I doing wrong here? With previous configurations I got errors about the BIT fields. In general, I only receive errors... The only thing that worked was with a table that only had nvarchar. Is there a fundamental mistake in what i do? I have read many posts, but nothing specific about handling different data types with bcp and bulk insert.
I would appreciate any help, as I am running out of time
Thank you.
Dimitris Chrysomallis
View 5 Replies
View Related
May 15, 2014
Is there a switch I can use to force a bulk insert and if data is truncated, I'm good with that. The truncated data, in this case, is not data I can use anyway if it is long enough to be truncated.
I need to keep the field at VARCHAR(23) and if I expand it, I won't be able to join on it after the file load completes. I'd like the data to be inserted (truncated if need be) and then I'll deal with the records that are truncated after I load the file.
View 5 Replies
View Related
Jul 6, 2006
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package3.dtsx" finished: Failure.
View 5 Replies
View Related
Apr 8, 2008
I receive the following error message when I try to use the Bulk Insert Task to load BCP data into a table:
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 4. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (overflow) for row 1, column 1 (rowno).".
Task failed: Bulk Insert Task
In SSMS I am able to issue the following command and the data loads into a TableName table with no error messages:
BULK INSERT TableName
FROM 'C:DataDbTableName.bcp'
WITH (DATAFILETYPE='widenative');
What configuration is required for the Bulk Insert Task in SSIS to make the data load? BTW - the TableName.bcp file is bulk copy file as bcp widenative data type. The properties of the Bulk Insert Task are the following:
DataFileType: DTSBulkInsert_DataFileType_WideNative
RowTerminator: {CR}{LF}
Any help getting the bcp file to load would be appreciated. Let me know if you require any other information, thanks for all your help.
Paul
View 1 Replies
View Related
Jan 15, 2008
Having searched the forum, this one clearly has form... However beyond assisting those who have fallen at the first hurdle (i.e. forgetting/not knowing that they cannot execute the package remotely to the instance of SQL Server into which they are inserting), the issues raised by others have not been addressed. Thus I am bringing nothing new to the table here - just providing an executive summary of problems which others have run into, written about, but not received answers for.
First the complete error:
Description: Unable to prepare the SSIS bulk insert for data insertion. End Error Error: 2008-01-15 04:55:27.58 Code: 0xC004701A Source: <xxx> DTS.Pipeline Description: component "<xxx> failed the pre-execute phase and returned error code 0xC0202071. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 4:53:34 AM Finished: 5:00:00 AM Elapsed: 385.384 seconds. The package execution failed. The step failed.
Important points
It mostly works - It produces no error more than 9 times out of 10.
It fails on random dataflows - My package has several dataflows, (mostly) executing concurrently. Where the error occurs it does not do so on the same dataflow each time: on one run it'll fail on dataflow A whilst B,C,D and E succeed, then A-E will all succeed (and continue doing so for the next ten runs thereafter), and then the error recurs for dataflow D, with A,B,C and E all succeeding.
Hope someone has something interesting to say,
Tamim.
View 10 Replies
View Related
Oct 12, 2007
Hi,
i have a file which consists data as below,
3
123||
456||
789||
Iam reading file using bulk insert and iam inserting these phone numbers into table having one column as below.
BULK INSERT TABLE_NAME FROM 'FILE_PATH'
WITH (KEEPNULLS,FIRSTROW=2,ROWTERMINATOR = '||')
but i want to insert the data into table having two columns. if iam trying to insert the data into table having two columns its not inserting.
can anyone help me how to do this?
Thanks,
-Badri
View 5 Replies
View Related
Apr 18, 2008
Hello,
I'm just learning SSIS and I've hit my first bump. I am doing a bulk import from a tab delimited text file to an empty sql table that has a Idendity column defined. How do I tell the bulk insert task to skip that column when inserting from the text file. If I remove the identity column it imports the data fine, but I want to create the indentity column in the table too.
Thanks.
View 8 Replies
View Related
Oct 8, 1999
I'm doing a bulk insert from a text file to sql server 7
I'm getting an error:
Server: Msg 4867, Level 16, State 1, Line 1
Bulk insert data conversion error (overflow) for row 1, column 169 (LOT_WIDTH).
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'STREAM' reported an error. The provider did not give any information about the error.
The statement has been terminated.
Now my lot-width field coming in is defined as a numeric 9(5).
My table is defined as an INT.
Any suggestion? I'm new to SQL7
Thanks
Jason
View 1 Replies
View Related
Jan 9, 2007
Hello SQLTEAM
I have a flat fix length file...
H315620060417
H315620060417
I have a format file
8.0
2
1 SQLCHAR 0 5 "" 4 MCO_Number SQL_Latin1_General_CP1_CI_AS
2 SQLCHAR 0 8 "
" 5 Run_Date SQL_Latin1_General_CP1_CI_AS
I get the following BULK INSERT
"BULK INSERT data conversion error (truncation) for
row 1, column 1 (MCO_Number).
Columns in destination table are nvarchar (5) and nvarchar (8). I have tried using "
" and "" as row terminators.
Any help appreciated.
View 1 Replies
View Related
Sep 6, 2007
I am attempting to bulk insert a comma delimited text file with double quotes as the text qualifier but I keep getting an error message(EOF) on the bulk insert.
I think the problem lies in my format file (see below)
Please take a look and let me know what I am missing?
Thanks,
Matt
Error message:
Msg 4832, Level 16, State 1, Line 1
Bulk load: An unexpected end of file was encountered in the data file.
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
Format File:
8.0
19
1 SQLCHAR 0 0 """ 0 first_quote SQL_Latin1_General_CP1_CI_AS
2 SQLCHAR 0 0 "","" 1 nt_id SQL_Latin1_General_CP1_CI_AS
3 SQLCHAR 0 0 "","" 2 first_name SQL_Latin1_General_CP1_CI_AS
4 SQLCHAR 0 0 "","" 3 last_name SQL_Latin1_General_CP1_CI_AS
5 SQLCHAR 0 0 "","" 4 department SQL_Latin1_General_CP1_CI_AS
6 SQLCHAR 0 0 "","" 5 phone SQL_Latin1_General_CP1_CI_AS
7 SQLCHAR 0 0 "","" 6 mgmt_level SQL_Latin1_General_CP1_CI_AS
8 SQLCHAR 0 0 "","" 7 emp_id SQL_Latin1_General_CP1_CI_AS
9 SQLCHAR 0 0 "","" 8 rc SQL_Latin1_General_CP1_CI_AS
10 SQLCHAR 0 0 "","" 9 subrc SQL_Latin1_General_CP1_CI_AS
11 SQLCHAR 0 0 "","" 10 location SQL_Latin1_General_CP1_CI_AS
12 SQLCHAR 0 0 "","" 11 floor SQL_Latin1_General_CP1_CI_AS
13 SQLCHAR 0 0 "","" 12 supervisor_id SQL_Latin1_General_CP1_CI_AS
14 SQLCHAR 0 0 "","" 13 status SQL_Latin1_General_CP1_CI_AS
15 SQLCHAR 0 0 "","" 14 hiredate SQL_Latin1_General_CP1_CI_AS
16 SQLCHAR 0 0 "","" 15 jobtitle SQL_Latin1_General_CP1_CI_AS
17 SQLCHAR 0 0 "","" 16 paygrade SQL_Latin1_General_CP1_CI_AS
18 SQLCHAR 0 0 "","" 17 id SQL_Latin1_General_CP1_CI_AS
19 SQLCHAR 0 0 ""
" 18 email SQL_Latin1_General_CP1_CI_AS
View 11 Replies
View Related
Feb 28, 2008
My server updated from SQL2000 to SQL2005, SP2.
I found error in bulk insert: -
"Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 1. Verify that the field terminator and row terminator are specified correctly.".
I do read a few article saying that after apply SP2 and hotfixes, this error should be fix, but unfortunately, it is not in my case, what should i do to fix it?
This is my script: -
BULK INSERT wng01_work..nw_business_person FROM 'g:SQLFTPCDIS_Extractew_worker.dat'
WITH
(
MAXERRORS = 1,
FORMATFILE ='g:sqlftpcdis_extractew_work.fmt'
)
Please advice, Thank you
View 4 Replies
View Related
Jun 5, 2006
I've got the following SP to automatically insert all files in a directory into the database:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE Imp_Header_PO_sp
@FilePath varchar(1000) = 'D:EBTOutbound',
@WIPPath varchar(1000) = 'D:EBTOutboundWIP',
@ArchivePath varchar(1000) = 'D:EBTOutboundArchive',
@FileNameMask varchar(1000) = '*Header.txt'
AS
BEGIN
SET NOCOUNT ON;
declare @Filename varchar(1000),
@File varchar(1000)
declare @cmd varchar(2000)
create table #Dir (s varchar(8000))
-- Move Header files to WIP
select @cmd = 'move ' + @FilePath + @FileNameMask + ' ' + @WIPPath
select @cmd = 'dir /B ' + @WIPPath + @FileNameMask
delete #Dir
insert #Dir exec master..xp_cmdshell @cmd
delete #Dir where s is null or s like '%not found%'
-- Import file
while exists (select * from #Dir)
begin
select @FileName = min(s) from #Dir
select @File = @WIPPath + @FileName
select @cmd = 'bulk insert'
select @cmd = @cmd + ' POWebOutHeader'
select @cmd = @cmd + ' from'
select @cmd = @cmd + ' ''' + replace(@File,'"','') + ''''
select @cmd = @cmd + ' with (Fieldterminator = ',')'
-- Import the data
exec (@cmd)
-- remove filename just imported
delete #Dir where s = @FileName
-- Archive the file
select @cmd = 'move ' + @WIPPath + @FileName + ' ' + @ArchivePath + @FileName
exec master..xp_cmdshell @cmd
end
drop table #Dir
END
GO
When I try to execute the code, I get the following error, on this line: select @cmd = @cmd + ' with (Fieldterminator = ',')'
Msg 141, Level 15, State 1, Procedure Imp_Header_PO_sp, Line 46
A SELECT statement that assigns a value to a variable must not be combined with data-retrieval operations.
I've tried to find a fix for this error, but it seams to only relate to a select statement and not a Bulk Insert. Can someone please help me figure out how to fix this error?
Thanks,
Laura
View 5 Replies
View Related
Apr 30, 2007
Simple test project. Created Flat File connection, database connection (both local), and Bulk Insert Task. When running the package I get the following error:
[Bulk Insert Task] Error: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.Bulk load: An unexpected end of file was encountered in the data file.".
I've tried different settings for the Flat File config, and the database connection, but still get the error. Any suggestions would be helpful.
Tks.
View 4 Replies
View Related
Jun 26, 2006
Hi,
I am using bulk insert to insert a lot of information from file to memory. In many cases it do the work but in one place it gives me the exception.
My code:
BULK INSERT tblCompVSNet1 FROM 'E:EasySeriesWindowsApplication1inDebug blCompVSNet1.tbl' WITH ( FIELDTERMINATOR = '|',ROWTERMINATOR = '|',LASTROW = 0,ROWS_PER_BATCH = 10000,CODEPAGE = 'RAW',TABLOCK)
The error:
Invalid object name 'tblCompVSNet1'
The table exists and the query works fine in query analyzer but in code through OLEDB it doesn't work sometimes.
How can I solve my problem?
Thank's
Alexei
View 6 Replies
View Related
Apr 16, 2007
Hi,
Im trying to make a replica of sqlserver 2005 replication.
In that main bottle neck is ..bulkcopying of data from publisher table and to subscriber table.
how to avoid this bulk copying while creating subscriber for a given Publisher.
regards
Baji Prasad.B
View 4 Replies
View Related
Apr 13, 2000
Help! I am importing a large comma delimited text file into an existing table useing the BULK INSERT command. The table is 4 colums (char16, char16, varchar50, char1). The first 100 or so lines go in without an error. then, I recieve an error stateing that an entry is too long for the field in the database, and kicks me out. The entry is 50 characters, which is allowed. Any ideas why this would happen?
View 1 Replies
View Related
Oct 23, 2000
I am using the following bulk insert statement:
bulk insert DB_Kash.dbo.tb_category
from 'C:cpdataSUPPLIER_5305OUTPUTTb_Category.txt'
with (formatfile = 'C:b_category.txt')
This works on one sql server and the same code does not work on another server.I have taken care to see that the path is appropriate.
Are there any server settings involved?
The table structure is the same in both cases and the select into nulk copy option has been selected.
The table has full text indexing set on it but I don't think that this would make any difference.
The only error it gives is "ILE DB Stream reported an error.The stream does not provide any expalanation regarding this error." Something like this.
Infact the same format file and datafile work fine when I am doing BCP.
I have tried with select into bulk copy option on and off too.
Any info on this is greatly appreciated.
thanks
Sush.
View 1 Replies
View Related
May 26, 2004
Hi,
Can someone help me out with capturing the bulk insert error.I have a job which calls a procedure in which I used the bulk insert command .If the bulk insert is failing due to some reason as wrong delimitor,wrong path etc then the job fails.I need to track that error and see that the job doesnt stop and goes onto the next cursor record.
Thanks,
Nodbek
View 8 Replies
View Related
Oct 30, 2014
I use code below to upload a csv file to SQL but got an error said that
Msg 4860, Level 16, State 1, Line 1
Cannot bulk load. The file "C:Test.csv" does not exist.
BULK
INSERT Test
FROM 'C:Test.csv'
WITH
(
FIELDTERMINATOR = ',',
ROWTERMINATOR = ''
)
GO
View 2 Replies
View Related
Feb 19, 2008
I have a query for bulk insert. It works fine. But when I use it today and run into following error message.
error 7301:Cannot obtain the required interface ("IID_IColumnsInfo") from OLE DB provider "BULK" for linked server "(null)".
SET @Sql = 'BULK INSERT #FVF_Tmp FROM ''' + @FilePath +'''' + ' WITH (BATCHSIZE = 100000,FIRSTROW = 2,TABLOCK, DATAFILETYPE = '''+ 'widechar' + ''')'
EXECUTE (@Sql)
The @FilePath points to a .csv file
then use data in temp table inser into a permanent table.
The input excel file is .csv file with 5 columns.
Thanks in advance.
View 1 Replies
View Related
Dec 2, 2005
I do not understand the error handling of SQL Server here. Any error inbulk insert seems to halt the current T-SQL statement entirely, renderingit impossible to log an error. The first statement below executes asexpected, and were I to replace "print" with something meaningful I coulddo some useful error handling. The second statement just seems to totallybail out after the error, preventing me from doing any useful errorhandling. This is a problem b/c I would like to schedule bulk inserts andneed to be notified if there is a problem.The following can be run in QA to demonstrate:print 'BEFORE TYPICAL ERROR'raiserror('Some Error', 16, 10)if (@@ERROR <> 0) print 'I can catch and log this error - good!' elseprint 'I can not catch and log this error - bad!'print 'AFTER TYPICAL ERROR'goprint 'BEFORE BULK INSERT'Bulk insert Northwind.dbo.ordersfrom 'ThisFileDoesNotExist'if (@@ERROR <> 0) print 'I can catch and log this error - good!' elseprint 'I can not catch and log this error - bad!'print 'AFTER BULK INSERT'goTIA,Dave
View 1 Replies
View Related
Sep 20, 2006
im trying to do a bulk insert & am getting the following error .
An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.Bulk load: An unexpected end of file was encountered in the data file.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 3 (calling_natr_addr_ind).".
i have set the connectn timeout to 0, but the error persists.
please help.
thanks,
zainab
View 3 Replies
View Related
Aug 27, 2007
insert into Table1 (intColumn1, intColumn2, intColumn3, .....)
select c1, c2, c3, .....
from anotherTable
The exception error won't tell you which column got the error if there is a conversion exception.
View 1 Replies
View Related
Jan 24, 2006
Hi,
I am new to MS DTS and i am using MS SQL 2000 as my database. I am trying to do a Bulk insert using MS DTS package. The package is trying to load data from Text file to a SQL 2000 table. When runninh the package i am getting an error saying that 1 task failed during execution and the task is shown in red colour indicating that the task has failed. Now when i get the details of the error it shows the follows:
Could not bulk insert because the file D:DtsFile.txt could not be opened. Operation system error code: 21 (The device is not ready).
Please help me in solving this problem, if any one has got this error and resolved or have any idea of the error please help. :)
Regards,
Rajeev Prabhu
View 2 Replies
View Related
Jan 30, 2006
Howdy y'all, what the hey am I doing wrong here?
I am trying to suck in a HUGE flat file that is tab-delimited and each row ends with a hex :0D:0A.
The first few lines of the file are:
00000000h: 31 30 30 30 32 09 32 30 30 33 2D 30 31 2D 32 39 ; 10002.2003-01-29
00000010h: 20 30 30 3A 30 30 3A 30 30 2E 30 30 30 09 32 30 ; 00:00:00.000.20
00000020h: 2E 33 39 30 30 09 31 39 2E 38 30 30 30 09 32 30 ; .3900.19.8000.20
00000030h: 2E 33 34 30 30 09 34 32 31 33 37 09 31 2E 30 30 ; .3400.42137.1.00
00000040h: 30 30 0D 0A 31 30 30 30 32 09 32 30 30 33 2D 30 ; 00..10002.2003-0
00000050h: 31 2D 33 30 20 30 30 3A 30 30 3A 30 30 2E 30 30 ; 1-30 00:00:00.00
00000060h: 30 09 32 30 2E 33 35 30 30 09 31 39 2E 38 30 30 ; 0.20.3500.19.800
00000070h: 30 09 31 39 2E 38 37 30 30 09 33 33 39 33 33 09 ; 0.19.8700.33933.
here is my table script:CREATE TABLE [dbo].[HSF_Staging_TEST] (
[OSID] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Date] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Time] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[High] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Low] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Price] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Volume] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Splits] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL
) ON [PRIMARY]
GOHere is my BULK INSERT statement:osql -S(local) -Uusername -Ppassword -Q "BULK INSERT Trades.dbo.HSF_Staging_Test FROM '\devserverinputfilesDataDataHSF.txt' WITH (FIELDTERMINATOR = ' ', ROWTERMINATOR = '', TABLOCK)" -o".HSF_Staging_Test_LOG.txt" -e".HSF_Staging_Test_ERR.txt"yeah, dang near perfect code, eh? ;)
well...here is the error I get...Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 1, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 2, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 3, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 4, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 5, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 6, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 7, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 8, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 9, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 10, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 11, column 8
(Splits).
Msg 4865, Level 16, State 1, Server TRADES, Line 1
Could not bulk insert because the maximum number of errors (10) was
exceeded.
Msg 7399, Level 16, State 1, Server TRADES, Line 1
OLE DB provider 'STREAM' reported an error. The provider did not give
any information about the error.
OLE DB error trace [OLE/DB Provider 'STREAM' IRowset::GetNextRows
returned 0x80004005: The provider did not give any information about
the error.].
The statement has been terminated.Is the problem something about the :OD:0A at the end of each row, rather than just the :0A??? If so, how the heck do I specify that? I think based on my testing so far (also tried '
' as the rowtermination param, but then it gives me a truncation error for the first row only, leading me to think it cannot find the end of the row that way.
I am still looking through archives and on the web, but have not seen anything specific to my issue yet...and cannot believe that I am the first to BULK INSERT this kind of data.
Help is appreciated!
~Paul
View 1 Replies
View Related
Oct 11, 2007
Using BCP or BULK INSERT you can specify an Error File (-e and ERRORFILE). However this does not seem to be exposed in SSIS via the Bulk Insert Task.
Does anyone know if I'm missing something and the Property is called something else or if can be accessed via script?
Cheers,
-Ryan
View 1 Replies
View Related
