I Am Using A Stored Procedure For Paging....
Aug 29, 2007
However it is not saving in visual srudio 2005. it is saying 'ambiguous column name ID' does anyone know why?CREATE PROCEDURE PagedResults_New
(@startRowIndex int,
@maximumRows int
)
AS
--Create a table variable
DECLARE @TempItems TABLE
(ID int IDENTITY,
ShortListId int
)
-- Insert the rows from tblItems into the temp. table
INSERT INTO @TempItems (ShortListId)
SELECT Id
FROM Shortlist SWHERE Publish = 'True' order by date DESC
-- Now, return the set of paged records
SELECT S.*FROM @TempItems t
INNER JOIN ShortList S ON
t.ShortListId = S.Id
WHERE ID BETWEEN @startRowIndex AND (@startRowIndex + @maximumRows) - 1
View 3 Replies
ADVERTISEMENT
Nov 14, 2005
I have a stored procedure which returns the results fine, i.e. my asp code of
do while not objRS.EOF
display record n
objRS.Movenext
Loop
Included in the stored procedure is the number of pages that are ultimately returned, however I don't know how to access that value from my asp code.
Here is the stored procedure. I want to get the value of PageCount from my ASP code????
CREATE PROCEDURE GetSortedPage(
@TableName VARCHAR(50),
@PrimaryKey VARCHAR(25),
@SortField VARCHAR(100),
@PageSize INT,
@PageIndex INT = 1,
@QueryFilter VARCHAR(100) = NULL
) AS
SET NOCOUNT ON
DECLARE @SizeString AS VARCHAR(5)
DECLARE @PrevString AS VARCHAR(5)
SET @SizeString = CONVERT(VARCHAR, @PageSize)
SET @PrevString = CONVERT(VARCHAR, @PageSize * (@PageIndex - 1))
IF @QueryFilter IS NULL OR @QueryFilter = ''
BEGIN
EXEC(
'SELECT * FROM ' + @TableName + ' WHERE ' + @PrimaryKey + ' IN
(SELECT TOP ' + @SizeString + ' ' + @PrimaryKey + ' FROM ' + @TableName + ' WHERE ' + @PrimaryKey + ' NOT IN
(SELECT TOP ' + @PrevString + ' ' + @PrimaryKey + ' FROM ' + @TableName + ' ORDER BY ' + @SortField + ')
ORDER BY ' + @SortField + ')
ORDER BY ' + @SortField
)
EXEC('SELECT (COUNT(*) - 1)/' + @SizeString + ' + 1 AS PageCount FROM ' + @TableName)
END
ELSE
BEGIN
EXEC(
'SELECT * FROM ' + @TableName + ' WHERE ' + @PrimaryKey + ' IN
(SELECT TOP ' + @SizeString + ' ' + @PrimaryKey + ' FROM ' + @TableName + ' WHERE ' + @QueryFilter + ' AND ' + @PrimaryKey + ' NOT IN
(SELECT TOP ' + @PrevString + ' ' + @PrimaryKey + ' FROM ' + @TableName + ' WHERE ' + @QueryFilter + ' ORDER BY ' + @SortField + ')
ORDER BY ' + @SortField + ')
ORDER BY ' + @SortField
)
EXEC('SELECT (COUNT(*) - 1)/' + @SizeString + ' + 1 AS PageCount FROM ' + @TableName + ' WHERE ' + @QueryFilter)
END
RETURN 0
GO
View 5 Replies
View Related
Dec 1, 2006
Hello, my table is clustered according to the date. Has anyone found an efficient way to page through 16 million rows of data? The query that I have takes waaaay too long. It is really fast when I page through information at the beginning but when someone tries to access the 9,000th page sometimes it has a timeout error. I am using sql server 2005 let me know if you have any ideas. Thanks
I am also thinking about switch datavase software to something that can handle that many rows. Let me know if you have a suggestion on a particular software that can handle paging through 16 million rows of data.
View 1 Replies
View Related
Oct 12, 2007
Hello, I receive this error "Incorrect syntax near 'GetGalleryPaged'." I'm trying to use custom paging on a stored procedure. ....... Dim mySqlConn As New SqlConnection(ConnStr) Dim objDA As New SqlDataAdapter("GetGalleryPaged", mySqlConn) objDA.SelectCommand.Parameters.Add("@startRowIndex", SqlDbType.Int, 1) objDA.SelectCommand.Parameters.Add("@@maximumRows", SqlDbType.Int, 9) Dim objDS As New DataSet() Dim objPds As PagedDataSource = New PagedDataSource objDA.Fill(objDS, "Gallery") <<----error here mySqlConn.Close() objPds.DataSource = objDS.Tables(0).DefaultView objPds.AllowPaging = True....... ALTER PROCEDURE dbo.GetGalleryPaged ( @startRowIndex int, @maximumRows int)AS SELECT idgallery, g_picpath FROM ( SELECT idgallery, g_picpath, ROW_NUMBER() OVER (ORDER BY idgallery DESC) AS RowRank FROM Gallery ) AS GalleryWithRowNumber WHERE RowRank > @startRowIndex AND RowRank <= (@startRowIndex + @maximumRows) ORDER BY idgallery DESC cheers,imperialx
View 5 Replies
View Related
Jan 15, 2004
my procedure is like this
////////////////////////////////////
CREATE PROCEDURE dbo.test2
(
@Page_No int,
@PageSize int,
@RowCount int output
)
AS
declare @intBeginID int
declare @intEndID int
declare @Counter int
set @Counter = 1
select @RowCount = count(*) from project
declare cro_fastread cursor scroll
for select * from project order by sector
open cro_fastread
select @intBeginID=(@Page_No-1)*@PageSize+1
select @intEndID = @intBeginID+@PageSize-1
fetch absolute @intBeginID from cro_fastread
WHILE @@FETCH_STATUS = 0 and @Counter < @PageSize
BEGIN
set @Counter = @Counter + 1
FETCH NEXT FROM cro_fastread
END
close cro_fastread
deallocate cro_fastread
/////////////////////////////////////////
my problem is the "FETCH" method can only get a row at one time, so there would be return many recordsets, how can I merge all the return recordset into one.
thanks in advance!
View 17 Replies
View Related
Feb 21, 2008
Hi Everybady
Currenctly I have facing a problem on how to create a stored procedure that able to filter the data and order it dynamically on selected row.
does anyone know how to do that
I have successfully create a stored procedure that able to order with any colume at any direction and select it from rownumber to another rownumber.
But i have failed to add another function with is where claus to do filtering on the data after ordering and selection
does anybody can give me a example about that?
Thanks a lot
View 9 Replies
View Related
May 6, 2007
As I said above, how do I put sorting + paging in a stored procedure.My database has approximately 50000 records, and obviously I can't SELECT all of them and let GridView / DataView do the work, right? Or else it would use to much resources per one request.So I intend to use sorting + paging at the database level. It's going to be either hardcode SQL or stored procedures.If it's hardcode SQL, I can just change SQL statement each time the parameters (startRecord, maxRecords, sortColumns) change.But I don't know what to do in stored procedure to get the same result. I know how to implement paging in stored procedure (ROW_NUMBER) but I don't know how to change ORDER BY clause at runtime in the stored procedure.Thanks in advance.PS. In case "ask_Scotty", who replied in my previous post, http://forums.asp.net/thread/1696818.aspx, is reading this, please look at my reply on your answer in the last post. Thank you.
View 3 Replies
View Related
Apr 28, 2008
This is for SQL Server 2000. The purpose of the procedure is to return a subset of a filtered and sorted result set. The subset, filter criteria, and sort column and sort direction can be set dynamically. It uses the rowcount technique for paging.
This would be used to drive an ASP.NET gridview which supports filtering of the data, paging, and sorting. Please let me know what improvements I can make or if you have an idea for a better solution. (I didn't put this in a vBulletin code block because personally I find two sets of scroll bars annoying, but I can if people think it's better).
CREATE PROCEDURE dbo.Books_GetFilteredSortedSubset
(
-- paging
@startRowIndex INT = 1,
@maximumRows INT = 999999,
-- sorting
@sortColumn NVARCHAR(30) = 'title_id',
@sortDirection NVARCHAR(4) = 'ASC',
-- filtering
@title VARCHAR(100) = NULL,
@type VARCHAR(30) = NULL,
@price MONEY = NULL
)
AS
BEGIN
DECLARE @sql NVARCHAR(4000)
DECLARE @parameters NVARCHAR(4000)
DECLARE @tableSource NVARCHAR(4000)
DECLARE @orderByExpression NVARCHAR(4000)
DECLARE @searchCondition NVARCHAR(4000)
DECLARE @uniqueKey NVARCHAR(30)
-- set the unique key used to ensure the rows are sorted deterministically
SET @uniqueKey = 'title_id'
-- build the FROM table source used throughout this procedure
SET @tableSource = 'titles t
inner join publishers p on t.pub_id = p.pub_id'
-- build the WHERE search condition used to control filtering throughout this procedure
SET @searchCondition = '(1 = 1)'
IF @title IS NOT NULL
SET @searchCondition = @searchCondition + ' AND (title LIKE ''%' + @title + '%'')'
IF @type IS NOT NULL
SET @searchCondition = @searchCondition + ' AND (type LIKE ''' + @type + '%'')'
IF @price IS NOT NULL
SET @searchCondition = @searchCondition + ' AND (price = ' + CAST(@price AS NVARCHAR) + ')'
-- build the ORDER BY expression used to control the sorting throughout this procedure
SET @orderByExpression = @sortColumn + ' ' + @sortDirection
-- add uniqeKey to ORDER BY statement to ensure consistent ordering of results when @sortColumn is not unique
IF @sortColumn <> @uniqueKey
SET @orderByExpression = @orderByExpression + ', ' + @uniqueKey + ' ' + @sortDirection
-- Get the column value at the position specified by @startRowIndex when the results are sorted in the desired sort order
SET @sql = 'SET ROWCOUNT @rowcount; SELECT @start_row = ' + @sortColumn + ', @start_row_id = ' + @uniqueKey +
' FROM ' + @tableSource +
' WHERE ' + @searchCondition + ' ORDER BY ' + @orderByExpression
PRINT @sql
SET @parameters = '@rowcount INT, @start_row sql_variant OUTPUT, @start_row_id sql_variant OUTPUT'
DECLARE @start_row sql_variant
DECLARE @start_row_id sql_variant
EXEC sp_executesql @sql, @parameters, @rowcount = @startRowIndex, @start_row = @start_row OUTPUT, @start_row_id = @start_row_id OUTPUT
-- Get the filtered subset of results
-- add sql to filter the results based on criteria passed in as parameters
SET @sql = 'SET ROWCOUNT @rowcount; ' +
'SELECT
t.title_id,
t.title,
t.price,
t.type,
p.pub_name,
p.city,
p.state,
p.country
FROM ' + @tableSource +
' WHERE (' + @searchCondition + ') AND '
-- add sql to control the starting row
IF @sortDirection = 'ASC'
SET @sql = @sql + '( (' + @sortColumn + ' > @start_row) OR (' +
@sortColumn + ' = @start_row AND ' + @uniqueKey + ' >= @start_row_id) )'
ELSE
SET @sql = @sql + '( (' + @sortColumn + ' < @start_row) OR (' +
@sortColumn + ' = @start_row AND ' + @uniqueKey + ' <= @start_row_id) )'
-- add sql to control the ordering of everything
SET @sql = @sql + ' ORDER BY ' + @orderByExpression
PRINT @sql
SET @parameters = '@rowcount INT, @start_row sql_variant, @start_row_id sql_variant'
EXEC sp_executesql @sql, @parameters, @rowcount = @maximumRows, @start_row = @start_row, @start_row_id = @start_row_id
-- Reset the rowcount for others
SET ROWCOUNT 0
END;
GO
View 14 Replies
View Related
Aug 27, 2007
Hi All!
I have Store Procedure:
If exists(Select * From sysobjects Where Name like 'Forum_Topic_SelectFromForum') Drop Procedure Forum_Topic_SelectFromForumgoCREATE PROCEDURE Forum_Topic_SelectFromForum( @ForumID varchar(10))
AS BEGIN TRANSACTIONSELECT * from Forum_Topic where ForumID=@ForumID Order by Tmp DESCIF @@ERROR <> 0 ROLLBACK TRANSACTIONELSE COMMIT TRANSACTION
Now, I want to Add 2 Variables: @Offset int, @Count int . With @Offset: the point of data, @Count: sum of row will get.
when get data I want it get from @Offset to Added @Count.
Help me to rewrite this store procedure. Thanks
View 2 Replies
View Related
Apr 23, 2008
Hi,
I've got some procedure which pages select query, the example is below:
Code Snippet
CREATEEND PROC GetCustomersByPage
@PageSize int, @PageNumber int
AS
Declare @RowStart int
Declare @RowEnd int
if @PageNumber > 0
Begin
SET @PageNumber = @PageNumber -1
SET @RowStart = @PageSize * @PageNumber + 1;
SET @RowEnd = @RowStart + @PageSize - 1 ;
With Cust AS
( SELECT CustomerID, CompanyName, CompanyAddress,
ROW_NUMBER() OVER (order by CompanyName) as RowNumber
FROM Customers )
select *
from Cust
Where RowNumber >= @RowStart and RowNumber <= @RowEnd end
How can I change this procedure in order to page the query OVER the column set as an argument?
In other words I would like to execute proc like:
- exec GetCustomersByPage 10, 1, 'CompanyName' which pages by CompanyName(...OVER (order by CompanyName)...)
- exec GetCustomersByPage 10, 1, 'CompanyAddress' which pages by ComanyAddress
Is it possible?
View 8 Replies
View Related
Mar 19, 2007
Hi All,
I am using store procedure to which we pass ...
1.Sql query (String)
2.Starting index (Integer)
3.Page size (Integer)
4.total records out (Integer)
It works fine for the simple queries like "select * from tblcountry" but give error in case when we have sort of inline query or order clause or some complex query etc.
Despite of what is happing in the procedure can any help me out with a simple store procedure to which i give any query , start index and page size it should give me record set according to the given page.
For example query could be 'Select * from tblcountry where countryid in (select * from tblteachers) order by countryname desc', start index=0 , page size is 100 and total records are 500.
Note:
When i pass this query to sql server directly using command object its exectued successfully (this mean that it will also run fine in query analyzer), but i want to use paging in sql server so that is why i need a procedure to implement paging and query could be any its fully dynamic but i will be a valid query.
Your help in this regard is realy apperciated...
View 10 Replies
View Related
Nov 1, 2007
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
View 1 Replies
View Related
Mar 3, 2008
Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
View 11 Replies
View Related
Nov 14, 2014
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
View 1 Replies
View Related
Jan 29, 2015
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
[Code] ....
View 9 Replies
View Related
Sep 19, 2006
I have a requirement to execute an Oracle procedure from within an SQL Server procedure and vice versa.
How do I do that? Articles, code samples, etc???
View 1 Replies
View Related
Dec 28, 2005
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
View 9 Replies
View Related
Sep 26, 2014
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
View 3 Replies
View Related
Mar 28, 2007
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Thanks in advance
View 9 Replies
View Related
Jan 23, 2008
Has anyone encountered cases in which a proc executed by DTS has the following behavior:
1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio
2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+)
The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query)
The Update ad-hoc query will finish in 2 minutes
View 1 Replies
View Related
Sep 13, 2007
Hi all,
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
Please advise..
Thank You
View 3 Replies
View Related
Mar 31, 2008
I have a stored procedure 'ChangeUser' in which there is a call to another stored procedure 'LogChange'. The transaction is started in 'ChangeUser'. and the last statement in the transaction is 'EXEC LogChange @p1, @p2'. My questions is if it would be correct to check in 'LogChange' the following about this transaction: 'IF @@trancount >0 BEGIN Rollback tran' END Else BEGIN Commit END.
Any help on this would be appreciated.
View 1 Replies
View Related
Oct 10, 2006
Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames
View 16 Replies
View Related
Nov 15, 2006
I have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system.
I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible?
Thanks,
Kevin
View 3 Replies
View Related
May 18, 2007
This is the Stored Procedure below ->
SET QUOTED_IDENTIFIER ON GOSET ANSI_NULLS ON GO
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 5/18/2007 11:28:41 AM ******/if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[BPI_SearchArchivedBatches]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)drop procedure [dbo].[BPI_SearchArchivedBatches]GO
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/3/2007 4:50:23 PM ******/
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/2/2007 4:52:19 PM ******/
CREATE PROCEDURE BPI_SearchArchivedBatches( @V_BatchStatus Varchar(30)= NULL, @V_BatchType VARCHAR(50) = NULL, @V_BatchID NUMERIC(9) = NULL, @V_UserID CHAR(8) = NULL, @V_FromDateTime DATETIME = '01/01/1900', @V_ToDateTime DATETIME = '01/01/3000', @SSS varchar(500) = null, @i_WildCardFlag INT)
AS
DECLARE @SQLString NVARCHAR(4000)DECLARE @ParmDefinition NVARCHAR (4000)
IF (@i_WildCardFlag=0)BEGIN
SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (Batch.BatchID = @V_BatchID )) AND ((@V_UserID IS NULL) OR (Batch.Created_By = @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 '
if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end
if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END
ELSEBEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (isnull (Batch.BatchID, '''') LIKE @SSS )) AND ((@V_UserID IS NULL) OR (isnull (Batch.Created_By , '''') LIKE @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 '
if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end
if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end
END
PRINT @SQLString
SET @ParmDefinition = N' @V_BatchStatus Varchar(30), @V_BatchType VARCHAR(50), @V_BatchID NUMERIC(9), @V_UserID CHAR(8), @V_FromDateTime DATETIME , @V_ToDateTime DATETIME, @SSS varchar(500)'
EXECUTE sp_executesql @SQLString, @ParmDefinition, @V_BatchStatus , @V_BatchType , @V_BatchID, @V_UserID , @V_FromDateTime , @V_ToDateTime , @SSS
GO
SET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
The above stored procedure is related to a search screen where in User is able to search from a variety of fields that include userID (corresponding column Batch.Created_By) and batchID (corresponding column Batch.BatchID). The column UserID is a varchar whereas batchID is a numeric.
REQUIREMENT:
The stored procedure should cater to a typical search where any of the fields can be entered. meanwhile it also should be able to do a partial search on BatchID and UserID.
Please help me regarding the same.
Thanks in advance.
Sandeep Kumar
View 2 Replies
View Related
Apr 29, 2008
I have a stored procedure that among other things needs to get a total of hours worked. These hours are totaled by another stored procedure already. I would like to call the totaling stored procedure once for each user which required a loop sort of thing
for each user name in a temporary table (already done)
total = result from execute totaling stored procedure
Can you help with this
Thanks
View 10 Replies
View Related
Apr 29, 2004
Hi there
i have a stored procedure like this:
CREATE PROCEDURE SP_Main
AS
SET NOCOUNT ON
BEGIN TRANSACTION
exec SP_Sub_One output
exec SP_Sub_Two output
IF @@ERROR = 0
BEGIN
-- Success. Commit the transaction.
Commit Tran
END
ELSE
Rollback Tran
return
GO
now the problem is, when i execute the stored procedure's inside the main stored procedure, and these sub sp's has an error on it, the main stored procedure doesnt rollback the transation.
now i can put the "begin transation" in the two sub stored procedure's. The problem is
what if the first "SP_Sub_One" executed successfully, and there was error in "SP_Sub_Two"
now the "SP_Sub_One" has been executed and i cant rollback it... the error occured in the
"SP_Sub_Two" stored procedure ... so it wont run ... so there will be error in the data
how can i make a mian "BEGIN TRANSACTION" , that even it include the execution of stored procedure in it.
Thanks in advance
Mahmoud Manasrah
View 1 Replies
View Related
Mar 2, 2007
Hello people,
When I am trying to call a function I made from a stored procedure of my creation as well I am getting:
Running [dbo].[DeleteSetByTime].
Cannot find either column "dbo" or the user-defined function or aggregate "dbo.TTLValue", or the name is ambiguous.
No rows affected.
(0 row(s) returned)
@RETURN_VALUE =
Finished running [dbo].[DeleteSetByTime].
This is my function:
ALTER FUNCTION dbo.TTLValue
(
)
RETURNS TABLE
AS
RETURN SELECT Settings.TTL FROM Settings WHERE Enabled='true'
This is my stored procedure:
ALTER PROCEDURE dbo.DeleteSetByTime
AS
BEGIN
SET NOCOUNT ON
DECLARE @TTL int
SET @TTL = dbo.TTLValue()
DELETE FROM SetValues WHERE CreatedTime > dateadd(minute, @TTL, CreatedTime)
END
CreatedTime is a datetime column and TTL is an integer column.
I tried calling it by dbo.TTLValue(), dbo.MyDatabase.TTLValue(), [dbo].[MyDatabase].[TTLValue]() and TTLValue(). The last returned an error when saving it "'TTLValue' is not a recognized built-in function name". Can anybody tell me how to call this function from my stored procedure? Also, if anybody knows of a good book or site with tutorials on how to become a pro in T-SQL I will appreciate it.
Your help is much appreciated.
View 6 Replies
View Related
May 16, 2008
Hello,
I am hoping there is a solution within SQL that work for this instead of making round trips from the front end. I have a stored procedure that is called from the front-end(USP_DistinctBalancePoolByCompanyCurrency) that accepts two parameters and returns one column of data possibly several rows. I have a second stored procedure(USP_BalanceDateByAccountPool) that accepts the previous stored procedures return values. What I would like to do is call the first stored procedure from the front end and return the results from the second stored procedure. Since it's likely I will have more than row of data, can I loop the second passing each value returned from the first?
The Stored Procs are:
CREATE PROCEDURE USP_DistinctBalancePoolByCompanyCurrency
@CID int,
@CY char(3)
AS
SELECT Distinct S.BalancePoolName
FROM SiteRef S
INNER JOIN Account A ON A.PoolId=S.ID
Inner JOIN AccountBalance AB ON A.Id = AB.AccountId
Inner JOIN AccountPool AP On AP.Id=A.PoolId
Where A.CompanyId=@CID And AB.Currency=@CY
CREATE PROCEDURE USP_BalanceDateByAccountPool
@PoolName varchar(50)
AS
Declare @DT datetime
Select @DT=
(Select MAX(AccountBalance.DateX) From Company Company
INNER JOIN Account Account ON Company.Id = Account.CompanyId
INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID
Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId
WHERE SiteRef.BalancePoolName = @PoolName)
SELECT SiteRef.BalancePoolName, AccountBalance.DateX, AccountBalance.Balance
FROM Company Company
INNER JOIN Account Account ON Company.Id = Account.CompanyId
INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID
Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId
WHERE SiteRef.BalancePoolName = @PoolName And AccountBalance.DateX = @DT
Order By AccountBalance.DateX DESC
Any assistance would be greatly appreciated.
Thank you,
Dave
View 6 Replies
View Related
Jul 20, 2005
Is it possible to execute a stored procedure in one database, which thenitself executes a stored procedure from another database? We have decide tosplit our data into a tree structure (DB1) and data blobs (DB2) (we areusing MSDE and we have a 2gb limit with each DB so we've done it this wayfor that reason). I would like to, say, execute a stored procedure in DB1,passing in the data blob and other details, DB1 will create a tree node inDB1 and then add the blob record to DB2. DB1 will wrap in a transaction ofcourse, as will DB2 when it adds the blob. Is this possible?
View 1 Replies
View Related
Sep 12, 2006
Hi everybody, I am having trouble how to fixed this code. I am trying to supply the parameterinside a stored procedure with a value, and displays error message shown below. If I did not supply the parameter with a value, it works. How to fix this?Error Message:Procedure or function <stored proc name> has too many arguments specified.Thanks,den2005
Stored procedure:
Alter PROCEDURE [dbo].[sp_GetIdeaByCategory]
@CatId <span class="kwd">int</span> = 0
AS
BEGIN
SET NOCOUNT ON;
Select I.*, C.*, U.* From Idea I inner join IdeaCategory C on I.CategoryID = C.IdeaCategoryID inner join Users U on I.UserID = U.UserID Where I.CategoryID = @CatId Order By LastModifiedDate Desc
End
oDataSource.ConnectionString = constr;
oDataSource.SelectCommand = storedProc;<span class="cmt">//storedproc - sp_GetIdeaByCategory</span>
oDataSource.SelectCommandType = SqlDataSourceCommandType.StoredProcedure;
oDataSource.SelectParameters.Add(<span class="st">"@CatId"</span>, catId);
gdvCategories.DataSourceID = oDataSource.ID;
gdvCategories.DataBind(); <<--- Error occured here
View 1 Replies
View Related
Jan 19, 2007
Can someone help me with this issue? I am trying to update a record using a sp. The db table has an identity column. I seem to have set up everything correctly for Gridview and SqlDataSource but have no clue where my additional, phanton arguments are being generated. If I specify a custom statement rather than the stored procedure in the Data Source configuration wizard I have no problem. But if I use a stored procedure I keep getting the error "Procedure or function <sp name> has too many arguments specified." But thing is, I didn't specify too many parameters, I specified exactly the number of parameters there are. I read through some posts and saw that the gridview datakey fields are automatically passed as parameters, but when I eliminate the ID parameter from the sp, from the SqlDataSource parameters list, or from both (ID is the datakey field for the gridview) and pray that .net somehow knows which record to update -- I still get the error. I'd like a simple solution, please, as I'm really new to this. What is wrong with this picture? Thank you very much for any light you can shed on this.
View 9 Replies
View Related
Jan 21, 2014
On SQL 2012 (64bit) I have a CLR stored procedure that calls another, T-SQL stored procedure.
The CLR procedure passes a sizeable amount of data via a user defined table type resp.table values parameter. It passes about 12,000 rows with 3 columns each.
For some reason the call of the procedure is verz very slow. I mean just the call, not the procedure.
I changed the procdure to do nothing (return 1 in first line).
So with all parameters set from
command.ExecuteNonQuery()to
create proc usp_Proc1
@myTable myTable read only
begin
return 1
end
it takes 8 seconds.I measured all other steps (creating the data table in CLR, creating the SQL Param, adding it to the command, executing the stored procedure) and all of them work fine and very fast.
When I trace the procedure call in SQL Profiler I get a line like this for each line of the data table (12,000)
SP:StmtCompleted -- Encrypted Text.
As I said, not the procedure or the creation of the data table takes so long, really only the passing of the data table to the procedure.
View 5 Replies
View Related
