I can connect to Analysis Service and Integration Service but I can not connect to the Database Engine. I receive the following error message:
Cannot connect to homebase.
Additional Information:
An error has occurred whlie establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server doesn not allow remote connections. (provider: SQL Network Interfaces, error: 25 - COnnection string is not valid)(Microsoft SQL Server, Error:87)
i installed sql server 2005 but cant connect to database engine. i write (computer name)sqlexpress but it failed. error is:
TITLE: Connect to Server ------------------------------ Cannot connect to rezasqlexpress. ------------------------------ ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
I've just installed a brand new instance of SQL on a new server. It's for our Helpdesk/Inventory software. All I needed to install was the DB Components and the Tools (primarily for Management Studio). I did not install SQL as a default instance, but called it TRACKIT8 (software using this instance). I have subsequently installs SP2 before trying to connect to the DB.
I am unable to conect to the DB Engine via Management Studio. In the Server name: field, there is a blank space, so I try to browse for a server, but I get nothing. I try to manually type the name of the server (NIASSQL2, localhost etc) into the field, but I cannot connect to the engine at all. I can see the services for the Server and Server Agent have started in the SQL Server Configuration Manager and I am able to change certain field in the properties of the Server and Agent (change the path of the error logs).
Is there something I am supposed to configure before I try to connect via the Management Studio? I am looking to change the paths of the Data Files, as I don't want them on my C: partition. Plus I have other instances I want to create and install. Any help would be greatly appreciated.
I have recently installed SQL Server 2005 Developer Edition. I did not install all the features, just the Database engine and Analysis Services. I also updated everything with SQL Server SP2.
So far, so good. But when I tried to connect to the Database Engine, I get a little window with the following message:
"Cannot connect to Valentin-PC (server name)."
"Login failed for user - User Name - ( Microsoft SQL Server, Error: 18456 )".
I have tried just about everything, but to no avail. What is strange is the fact that I can connect to the other server type that I have installed (Analysis Services). No connection problems there.
I just installed SQL server Enterprise 2005 and connected database engine in SQL server management studio, but it is blank space when choose 'browse for more' at server name field. What's reason to cause this problem?
Questions for this problem:
1. Do I need to open the TCP port 1433 in firewall by hand for connect database engine?
2. I can€™t find the sqlbrowser.exe in SQL server/90/ folder, can I copy this file into it.
3. The SQL server mobile is work; I can connect the new created database. What€™s different to use SQL server mobile and database engine?
4. I got five discs from Microsoft; I have installed DVD server application and pack 2. Do I need to install the library?
When trying to open the sharepoint webpage I'm getting this error - cannot connect to the configuration database sharepoint 2010.Database is on SQL server 2008.Tried opening the site on server - got the same error.Googled and tried to start the mssqlserver services (browser and sql server) but they fail to start with error code 17058.
Googled what this error was about and some solutions led me to check the error log in event viewer. For mssqlserver I got following message in the event proverties window -Â Could not open error log file <path of log file> ''. Operating system error = 5 (access denied).When I tried to login on the sql server management studio, it does not let me login and gives error -Â
I got to know that this can happen due to unexpected reboot of server. I checked my server and it had actually restarted unexpectedly.URL...
I am trying to run MS SQL Server Management Studio Express. According to what I read, I can connect by selecting Database engine, then on server name, I put my computer name sqlexpress. I am using Windows Authentication. Every time, I get:
TITLE: Connect to Server ------------------------------ Cannot connect to kennethsqlexpress. ------------------------------ ADDITIONAL INFORMATION: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476 ------------------------------ BUTTONS: OK ------------------------------
What am I doing wrong? Thanks for helping me to stop pulling my hair out.
Hello I've just installed 'SQL server 2005' and it installed the components like .Net2.0 and visual studio 2005 . before installing them I had uninstalled sql server2000 . I ran SQL management studio and tried to connect and makin' servers it doesn't allow me to connect or making any new servers...... it gives me this error Cannot connect to local. Additional information: An error has occured while establishing a connection to the server. ...... error:53)
I am working (or trying to work) in Management Studio. I have one database that I use on my one and only machine. ( I am not using any of the default databases.) I have several queries saved as files, which I open as needed. Every time I open a file I get that VERY ANOYING Connect to Database Engine dialog box. OK, it's no big thing. I don't use Server Authentication so all I have to do is hit enter and I get connected. But why should I even have to hit enter once after I'm already connected?
I finally got SQL Server 2005 installed on my Vista Ultimate computer and now I can't connect in SQL Server Management Studio.
I've got a named instance; use the built-in system account; windows authentication mode. I try to connect to
Server type: Database Engine Server name: RAYWOERNER-PCRAYWOERNER Authentication: Windows Authentication
and it fails. Please help.
Thanks,
Ray
Here are the technical details:
=================================== Cannot connect to RAYWOERNER-PCRAYWOERNER. =================================== Login failed for user 'RayWoerner-PCRay'. (.Net SqlClient Data Provider) ------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476 ------------------------------ Server Name: RAYWOERNER-PCRAYWOERNER Error Number: 18456 Severity: 14 State: 1 Line Number: 65536
------------------------------ Program Location: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server) at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Hello, I have installed SQL Server 2005 in my PC and during the installation I have created a predefined instance (I have used Windows autentication). I could use correctly SQL Server till some days ago, when I changed the password of my PC login profile. Now, when I open SQL Server, if I click on the "Connect" button, the following error message appears (I translate it from italian version)
Unable to connect to "CARLO" Further information: An error has occurred while you were trying to establish a connection to the server. When you connect to SQL Server 2005, this error can be generated because SQL Server doesn't allow remote connections under the predefined settings. (provider: Provider Named Pipes, error: 40 - Unable to open a connection to SQL Server) (Micorsoft SQL Server, error:2)
I'm sure that the error raises because I have changed my PC access password (the program worked correctly before), but in the "Connect to Server" window the user name and the password text boxes are disabled, so I can't insert the new password... Can you suggest what have I to do?
I'm using Microsoft SQL Server 2005 Developer Edition and I installed it under "Local System" on Microsoft Windows Vista Ultimate.
I understand that there are issues of course that occur with this, however I can't seem to understand why what I'm doing isn't working. I'm not using this on any server, just to test out ASP.NET 2.0 applications - nothing more.
I'm getting this error:
TITLE: Connect to Server ------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
------------------------------ BUTTONS:
OK ------------------------------
I've installed this via a mixed authentication (as suggested by www.wrox.com).
I tried enabling the TCP/IP and named pipe connections, just as previous people have done, but it hasn't worked. Nor has enabling the SQL Browser.
Is there any description on what the Remember Password check box on this dialog box does? As far as I can tell, it doesn't do anything. Every time I open an item from a project, or create a new Query, I get asked for the password, no matter how many times I have given it for the Server before.
It looks so useful, but is frustrating not knowing how to use it.
When opening .sql files, I get a connect to database engine prompt every single time. how to stop this from prompting vs. just using my current active connection?
I just upgraded from Windows XP Pro to Windows Vista Bussiness and tried to reinstall SQL Server 2005 Developers Edition. After the installation i downloaded (using microsoft windows update) and installed all the service packs for sql and vista available.
My problem is when i open sql server management studio and try to connect to my default instance using windows authentication and database engine, an 18456 error occurs.
I enabled all the protocols and all the ports I disabled windows firewall and antivirus (eset nod32) I installed all service packs available I have also installed Visual Studio 2005 without installing sqlexpress
But nothing happens!
Please i am very desperate, any information will be gratefully accepted.
This is my installation Information
Code Snippet
Microsoft SQL Server Management Studio 9.00.3042.00 Microsoft Analysis Services Client Tools 2005.090.3042.00 Microsoft Data Access Components (MDAC) 6.0.6001.18000 (longhorn_rtm.080118-1840) Microsoft MSXML 3.0 5.0 6.0 Microsoft Internet Explorer 7.0.6001.18000 Microsoft .NET Framework 2.0.50727.1434 Operating System 6.0.6001
I have SQL 2012 database on availability group environment..Due to lack of space on SQL log partition. I have added to new hard drive configures on RAID1.Moved the ldf files from active partition to newly created partition.SMS change the path for log drive to new driveRestart SQL server services.I cannot connect to databases anymore and I have also lost all setting of Availability group..Error message
Event logs for Application
Log Name:Â Â Â Â Â Application Source:Â Â Â Â Â Â Â MSSQLSERVER Date:Â Â Â Â Â Â Â Â Â 16/07/2015 8:32:22 a.m. Event ID:Â Â Â Â Â 5123 Task Category: Server
I recently installed SQL Server and Visual Studio. When I went into SQL Server, I could only connect to a SQL EXPRESS Database engine. I need to access the full Database. I tried disconnecting it, uninstalling/reinstalling. Now I cant connect to the SQL EXPRESS DB Object. There are no SQL Server services running.
I've two instances(Default, Named[dynamicsFINANCE]) running on SQL server 2014. However, when I try to connect to named instance say (dynamics FINANCE) using SQL authentication from local SSMS, I get below error message.A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)I assigned a static port number to the named instance [dynamicsFINANCE]Â 1450. I also setup the firewall rule to allow access to Port 1450.
We have 3x instances of SQL Server 2012 installed on a single remote server - there's the default MSSQLSERVER instance, then INSTANCE01 and INSTANCE02. I can remotely connect to the default MSSQLSERVER instance through SSMS, but I cannot connect to either of the additional named instances (INSTANCE01 or INSTANCE02).Â
For example, if I try to connect to "sql.domain.com", I can successfully access the default instance on the remote server. If I try to connect to "sql.domain.comINSTANCE01", I get an error stating
"A network-related or instance-specific error occurred while establishing a connection to SQL Server".
However - if I try to connect to "sql.domain.comINSTANCE01, 49301" (where 49301 is the TCP Port for the TCP/IP Protocol for this SQL Server instance), I am able to successfully connect.
This leads me to think that there's a communication issue with the SQL Server Browser service running on the remote SQL Server and my workstation.Â
The following items have been verified:
SQL Server Browser is running on the remote SQL ServerWindows Firewall has been disabled on the SQL ServerTCP Ports 1433, 1434, 1954, and 49301 have been opened up on the remote destination's firewallUDP Port 1434 has been opened up on the remote destination's firewall.
i have a sql server job scheduled to run daily twice.the job is running fine , but once  or twice a week the job fails saying."Message Unable to connect to SQL Server '(local)'.  The step failed." all other times the job runs successfully. it randomly the job is failing. once its failed and if i try to run it manually it runs fine or it will start running fine from next schedule onwards.This job mainly executes a stored procedure.the owner of the job is setup as sa. i don't understand why its fail randomly and all other times(90% of cases) it successful."Unable to connect to SQL Server '(local)'.  The step failed."
I work in an environment where everyone is there own server. I can connect to a collegeau's SQL Server by using the Windows Authentication method in the Database Engine but if I try to connect to the Reporting Services Engine it says that I am not allowed to connect due to permission violations. How do I get adequate permissions to do so? I have all of the components for Reporting Services installed and I am actively using it. I want to be able to test the functionality of the RSScriptor before deploying it out to others.
In Management Studio i highlight my query and then click on 'Analyse query in Database Engine Advisor' but i get the following error message: "Failed to connect to an IPC Port: The system cannot find the file specified". Seems like if I reboot my computer it works one time then get the same error on the second time.I'm running developer edition with service pack 2.
I have just finished configuring my first test mirrored environment (High safety mode). I setup the database engine service accounts on each of the servers with domainuser. I inherited a production mirrored environment set up by someone else. On the production servers the database engine service account is NT Authorityuser a local account. I am trying to practice installing Windows updates within a mirrored environment and I not sure how to proceed when the service account is NT Authority user account. should I change the service account to a domainuser?
I have MS-Access as data source for one of the reports. I can preview the report fine from BI studio however, it does not work when I deploy it on report server.
The error is :
An error has occurred during report processing. Cannot create a connection to data source '<data source name>'.
The Microsoft Jet database engine cannot open the file '<UNC location of the MS-Access database>'. It is already opened exclusively by another user, or you need permission to view its data.
MS-Access database is located on a different server.
Any help to solve this? I understand it has something to do with permission both on server where reporting service is running as well as the server where MS-access database is located. Pls help.
I am trying to modify the files path (primary file, log file) of databases, but it looks like I am not able to mofidy their files path directly from the database property dialogue? Would please any experts here give me some ideas on what else can I try to figure it out? Thanks a lot in advance and I am looking forward to hearing from you shortly.
Hi folks, Whts up........??? M back, after a long gap. I have come across with a major issue. And u know wht th issue is.........??? It is about th DATABASE SEARCH TOOL. I have a database of around 30 tables. Now I wud like to have aa search engine on my .asp page. There will be a text box on th page and one submit button. After typing some text in th text area n submitting th page, my package sud check tht perticular text in all th COLUMNS of all th TABLES, n whrevr it gets a match (exactly same, or by speech recognition), it sud through th links on th next page.
Nw i wud like u guys to take this problem, at th earliest n come up with a up to th mark solution.
Product : Database Services (MSSQLSERVER) Product Version (Previous): 1399 Product Version (Final) : Status : Failure Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log Error Number : 29512 Error Description : MSP Error: 29512 SQL Server Setup was unable add user NT AUTHORITYSYSTEM to local group DCCIBERSQLServer2005SQLAgentUser$DCSQL01$MSSQLSERVER.
I have recently installed SQL server 2005 express edition along with Sql server management studio expressI have run the installation twice and during the installation I have created two instances of SQL server one named instance having Windows authentication and the other default instance having mixed mode authentication. Now I want to delete the named instance. Could anybody tellme I can delete the named instance?
