I Cant Start My Server (urgent Please)
Aug 22, 2000
Hi
i cant start the server.....,its giving following error in
nt event viewer,any help please
we are running on sqlserver 6.5
Error : 1105, Severity: 17, State: 2
Can't allocate space for object 'Syslogs' in database 'master' because the 'logsegment' segment is full. If you ran out of space in Syslogs, dump the transaction log. Otherwise, use ALTER DATABASE or sp_extendsegment to increase the size of the segment.
thanks in advance
bye
ram
View 1 Replies
ADVERTISEMENT
Mar 23, 2001
Hi, I have 2 windows 2000 server in cluster with sql server 2000 enterprise edition installed.
I have activated the Server-Requested Encryption by using the sql server network utility (Force Protocol Encryption). After this, I have stoped sql server service. But I can't start it at this moment.
The error is:
19015: The encrypton is required but no available certificat has been found.
Please help me to start sql server.
Thanks.
Michel
View 4 Replies
View Related
Aug 22, 2000
Hello,
We stopped one of our SQL Servers from the SQL Enterprise Manger earlier. For some reason it doesn't want to start back up. I deleted the SQL Server registration for that box in my SQL Enterprise Manager. Tried to register it again and got the error message: "General network error. Check you network documentation.|ConnectionOpen(connect().
I restarted the box. The SQLServerAgent services were configured to start automatically, but they don't start the server. I tried to do it manually, didn't help.
Is there any way to start the server from the DOS command line, or some other way?
Thank you very much.
View 5 Replies
View Related
Aug 23, 2001
We used Named Pipes network library when running SQL Server 2000. The firewall and ip address on the box were changed and reconfigured. We rebooted the server. We cannot start the SQL Server now.
Any suggestions?
Thank you very much,
Nastya
View 1 Replies
View Related
Jan 24, 2002
I'm running sql 6.5. trying to load lots of data. Rec msg that memory was low so I increased memory obvisouly too high. Now sql will not start. found all the documentation to start sql in single user mode however when trying to start isql to change to memory setting, isql would not start. The server is using named pipes. Message I receive is sql server is unavailable or does not exist.
You help would be greatly appreciated as this is a production environment and we are down.
thanks!!
darlene
View 2 Replies
View Related
Oct 26, 2000
hi, I have settup up sql mail and did the following:
1. created an E-mail account and configured Out look by creating a pop3 mail profile. tested it by sending and receiving mail, that is ook
2. I Created one domain account for MSsqlserver and Sql Agent service. both services use same account and start automatically in the control panel-services
3. I used the profile that I created in outlook to test the sql mail but got an error:
Error 22030 : A MAPI error ( error number:273) occurred: MapiLogon Ex Failed due to MAPI
Error 273: MAPI Logon Failed
I really do not know what went wrong. I followed the steps from bol and still having a problem. Am I missing something.
I do have a valid email account
I do have a valid domain account
I tested outlook using the email account and it worked. so why sql server does not recognise MAPI.
My next question, How to configure MAPI in Sql server if what I did was wrong.
View 1 Replies
View Related
Mar 30, 2007
1) RS Start in Window Severvices
2) RS Start in Configration
1) and 2) Is Same?
I think that It looks like same Operation.
View 1 Replies
View Related
Dec 13, 2007
SQL Server Reporting Services 2005 Service would not Start on windows server 2003. Working great till yesterday and no changes were made to config file.
Here is the error in Event log
Event Type: Error
Event Source: SQL Server Report Service
Event Category: None
Event ID: 0
Date: 12/13/2007
Time: 8:25:59 AM
User: N/A
Computer: XXXXXXXXXXX
Description:
Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
at Microsoft.ReportingServices.Library.ServiceAppDomainController.Start(Boolean firstTime)
at Microsoft.ReportingServices.NTService.ReportService.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Here is i found in log files
ReportingServicesService!resourceutilities!4!12/13/2007-08:25:59:: i INFO: Running on 0 physical processors, 1 logical processors
ReportingServicesService!servicecontroller!4!12/13/2007-08:25:59:: e ERROR: Exception caught loading and setting code permissions policy level: System.Security.XmlSyntaxException: Invalid syntax on line 158.
at System.Security.Util.Parser.GetRequiredSizes(TokenizerStream stream, Int32& index)
at System.Security.Util.Parser.ParseContents()
at System.Security.Util.Parser..ctor(Tokenizer t)
at System.Security.SecurityManager.LoadPolicyLevelFromStringHelper(String str, String path, PolicyLevelType type)
at System.Security.SecurityManager.LoadPolicyLevelFromString(String str, PolicyLevelType type)
at Microsoft.ReportingServices.Library.ServiceController.SetAppDomainPolicy()
ReportingServicesService!servicecontroller!4!12/13/2007-08:25:59:: e ERROR: Error Starting Service: System.Security.XmlSyntaxException: Invalid syntax on line 158.
at System.Security.Util.Parser.GetRequiredSizes(TokenizerStream stream, Int32& index)
at System.Security.Util.Parser.ParseContents()
at System.Security.Util.Parser..ctor(Tokenizer t)
at System.Security.SecurityManager.LoadPolicyLevelFromStringHelper(String str, String path, PolicyLevelType type)
at System.Security.SecurityManager.LoadPolicyLevelFromString(String str, PolicyLevelType type)
at Microsoft.ReportingServices.Library.ServiceController.SetAppDomainPolicy()
at Microsoft.ReportingServices.Library.ServiceController.StartService(Boolean firstStart)
View 1 Replies
View Related
Jun 22, 2007
In the last step of installing the SQL Server 2005 Express edition I get the following error:
Doing Action: Do_sqlScript
PerfTime Start: Do_sqlScript : Thu Jun 21 19:38:35 2007
Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:38:35 2007
Service failed unexpectedly (1814)
Error Code: 0x80070716 (1814)
Windows Error Text: The specified resource name cannot be found in the image file.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqlservicetart
Source Line Number: 301
---- Context -----------------------------------------------
Do_sqlScript
SqlScriptHlpr
Start service MSSQL$SQLEXPRESS
Error Code: 1814
MSI (s) (80!08) [19:39:58:265]: Product: Microsoft SQL Server 2005 Express Edition -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1814) The specified resource name cannot be found in the image file.
.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1814) The specified resource name cannot be found in the image file.
.
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_sqlScript
PerfTime Start: Do_sqlScript : Thu Jun 21 19:39:58 2007
Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:39:58 2007
Service failed unexpectedly (1814)
Error Code: 0x80070716 (1814)
Windows Error Text: The specified resource name cannot be found in the image file.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqlservicetart
Source Line Number: 301
Any idea how I can fix this?
View 1 Replies
View Related
Jul 18, 2007
Hello,
I have installed SQL server 2005 enterprise edition on Windows 2003 virtual PC (full installation). The installation went through successfully. However, after install completed, I cannot find any of the client tools under the start menu -> all programs -> Microsoft SQL server 2005 menu. The only item listed under the SQL server 2005 is Configuration Tools, which is used to configure the database server.
I have tried to install the client component again (in case I didn't install them at the first place) but the installation process cannot be started since it detected that the client components have been installed already. I can also see the sql server native client running in the services.
The server engine is working fine since I can connect to that sql server using another machine where I have the client tool (SQL server management studio).
One of my friends has exactly the same problem. He installed the sql server 2005 Standard edition on windows 2003 server (full installation), but the client tools are not showing up in the start menu either.
I also checked the location for the SQL server management studio (Microsoft SQL server/90/Tools/Binn/VSShell/Common7/IDE), there is only one folder called publicAssemblies listed under. Is this correct or something is missing?
Thanks
View 11 Replies
View Related
Sep 27, 2000
This morning I can not connect to our SQL Server 7.0 whatever from client or server. The error message which I list below:
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++
A connection could not be estabished to server--Timeout expired
Please verfy SQL Server is running and check your SQL Server registration properties and try again.
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++
We use windows NT authentication. We did not do any change on NT. The SQL Server daily schedule job usally stoped at 10:00AM, but today from the Window NT Task Manager, we can see that the SQL Server is still running untill now.
Please help!!!
View 3 Replies
View Related
May 22, 2005
I am new to SQL Server. I tried to read as much as possible in newsgroups prior to this post. I have tried several different ways to install this without success. The last time I attempted to install as a local service and I unchecked hide advance configuration. I am running Windows XP SP2 with all the latest updates. Is there a solution to install this properly? Any help would be greatly appreciated!
View 13 Replies
View Related
Aug 8, 2007
I had a small power outage and after that, SQL Server (2000) is not starting. I press the start button, it looks like it tries to do something (since all the buttons get disabled) and then its back to square one. I tried this from command line: sqlservr.exe -c -f but it does not help either.
I checked the SQL Server logs and this is what I found:
2007-08-08 10:05:09.63 spid3 Starting up database 'master'.
2007-08-08 10:05:09.63 spid3 Error: 823, Severity: 24, State: 6.
2007-08-08 10:05:09.63 spid3 08/08/07 10:05:09 Stack Overflow Dump not possible - Exception c00000fd E at 0x004436DD
2007-08-08 10:05:09.63 spid3 Address=4436dd Exception Code = c00000fd
I tried to google but could not find a solid solution.
View 2 Replies
View Related
Jan 3, 2008
Dear Friends,I cannot start my SQL Server 2005. When I'm trying to conect to local database it's showing me error:TITLE: Connect to Server------------------------------Cannot connect to WIN2006.------------------------------ADDITIONAL INFORMATION:An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)This error mean that server not started.When I read more details (error log in SQL Configuration Manager) I found that the source of the problem - "master" table was compressed. It should be decompressed to start server. What's this? I'm seeing this kind of error first time. Need your advise guys!
View 9 Replies
View Related
Oct 13, 2005
All,
I am having a problem and cannot get my instance of SQL Server 2000 to
start. When I check the event viewer, this is the error I see:
Error: 9003, Severity: 20, State: 1
The LSN (6:308:1) passed to log scan in database 'model' is invalid.
Any ideas?
Karls
View 1 Replies
View Related
Apr 10, 2001
Is there a way to start a job on another server from within a job?
View 1 Replies
View Related
May 9, 2000
I got an error:
'Error 1069: The service did not start due to logon failure'
This occured when I tried to start mssqlserver from Control panel.
Thanks,
PN.
View 2 Replies
View Related
Jun 22, 2000
My SQL Server 7.0 was working for the last number of months until last night. When I came into the office this morning, it was down. I tried to restart it. It started and then shut itself down after about 10 seconds. I have tried to get the properties of the SQL Server, but I get an error message of "A connection could not be established to "the server name" - Communication link failure ConnectionWrite (WriteFile())..
Please verify SQL Server is running and check your SQL Server registration properties."
The computer has been rebooted, twice. SQL Server is set to automatically started on boot up.
Can someone shed some light on this?
Should I re-install SQL Server?
Thanks
View 5 Replies
View Related
Apr 5, 2000
Hi
I have a problem starting my SQL server. It all started when I had a database that has been trying to restore for days. I followed the instruction give by Kevin J McCarthy - (I did not follow the instruction correctly) - put a trace flag at start up flag 3608 -T3608. However, I did that within the Enterprise manager - under profile. Stopped the SQL server and tried to restart. It will not restart. I tried putting a /f flag at start up - this time under the NT service startup dialog box, I started the database, but I cannot access the SQL Server because of invalid login. In the NT event viewer, it has this message
Your profile was not successfully loaded, but you have been logged on with the default system profile. Please correct the problem and log off. (5)
I know I entered the correct login and password because I am the administrator. Please help!
Thanks in advance
Betty Li
View 1 Replies
View Related
Aug 16, 1999
I got the following message in the Error log:
99/08/10 17:02:12.07 spid1 Recovering database 'model'
99/08/10 17:02:12.19 spid1 Recovery dbid 3 ckpt (259,1) oldest tran=(259,0)
99/08/10 17:02:12.28 spid1 102 transactions rolled forward in dbid 3.
99/08/10 17:02:12.28 spid1 3 transactions rolled back in dbid 3.
99/08/10 17:02:12.31 spid1 Error : 1105, Severity: 17, State: 2
99/08/10 17:02:12.31 spid1 Can't allocate space for object 'Syslogs' in database 'model' because the 'logsegment' segment is full. If you ran out of space in Syslogs, dump the transaction log. Otherwise, use ALTER DATABASE or sp_extendsegment to increase the size of the segment.
99/08/10 17:02:12.32 spid1 Unable to write CHECKPOINT record in database 3 because the log is out of space.
99/08/10 17:02:12.37 spid1 Clearing temp db
99/08/10 17:02:12.41 spid1 Error : 1105, Severity: 17, State: 2
99/08/10 17:02:12.41 spid1 Can't allocate space for object 'Syslogs' in database 'model' because the 'logsegment' segment is full. If you ran out of space in Syslogs, dump the transaction log. Otherwise, use ALTER DATABASE or sp_extendsegment to increase the size of the segment.
99/08/10 17:02:12.41 spid1 Unable to write CHECKPOINT record in database 3 because the log is out of space.
99/08/10 17:02:12.41 kernel Failed to create temp db
The SQL Server does not start.
I know I did not change any settings on the model database.........
Does anybody has any idea about what could have went wrong?
thank you.
Elias Akouri
View 2 Replies
View Related
Jan 14, 2005
Hello,
Out of the blue my SQl server that has been running for the past 2 years stopped running, when I try to start from the Server manager it starts for 10 secs and stops running. Anyone what is going on?
Thanks
Mike
View 4 Replies
View Related
Dec 14, 2004
I created an empty database on my PC and then restored from a backup file successfully.
Now I cannot run SQLServer or any related program.
Rebooting does not make any difference. When I attempt to start any SQLServer program I get a dialogue appearing with the Fatal Error message :
"Execution cannot continue as the language dependent resource file C:Program FilesMicrosoft SQL Server80ToolsBinnResources3081SQLSVC.RLL could not be loaded"
I have searched for the Resources3081 directory and do not have it. I suspect that there is some incompatibility with the database I loaded although it seems strange that it successfully loaded to completion.
As I cannot even start SQLServer I can't drop the database or do anything.
HELP!
Ideally I would like to be able to get the database running however my second choice would be to at least get SQLServer running so I can at least run my other databases.
View 12 Replies
View Related
Feb 2, 2004
Hi All...
I am knew to SQL 2000 running it on Win 2k server SP4.. when MYDOOM came out last Monday, since then my SQL SERVER 2000 is acting weird.. my server was not affected but since then when I turn on my SQLSERVER, SQLAGENT.exe utilizes 99-100% of CPU making the server unresponsive.. I cant even "End Task" it, caz it would say Access Denied even when I am logged in with Admin account. When I start SqlMangr.exe it does the same thing..utilizing 100% of the CPU. I have tried reinstalling SQL Server 2000, but when it comes to the point of restarting the server, my server hangs and I have to cancel the installation. Tried installing SP3, didn’t work.. osql.exe started using 100%.. I have no clue what to do.. Please Help me.. I have tried disabling the Network Connections and starting the services but same thing happens.
I can’t even open Enterprise manager, it hangs up the server.
I would really appreciate any kind of help.
Thank you
View 2 Replies
View Related
Jul 20, 2005
Hello,I have installed MSDE2000A on a standalone PC with Win ME O/s. The PCwas earlier used on a Lan and has a Lan card. I could install a namedinstance of the server successfully but the server does not start whenI attempt to start it using the service manager.Could you tell me how this could be solved?Thanks in advance.Isaac
View 3 Replies
View Related
Aug 2, 2006
hello all,
I am using SQL Server 2000.
I am facing a problem since yesterday that my sql server does not start.
It gives me the error that 'Could not start sql server. sql server does not exists or access denied....Instance already running' when I try to start or connect to the server.
I changed Authentication mode from WIndows Only to Sql Server and Window a week ago. It worked fine. Then I changed it back to WIndows Only. When I did that, server is not starting up. it is set to automatically start with operating system. But when I restart my computer, even then server does not start.
What has happened to the server? Is it because of Authentication mode change that I mentioned above or something else?
Please help me! I need to start it soon and make 3 new tables and some new stored procedures. I am stucked.
please help!
Thanks in advance.
View 6 Replies
View Related
Mar 13, 2006
Hi there,
Here's what I get in my error log:
2006-03-13 00:33:11.93 Server TDSSNIClient initialization failed with error 0xd, status code 0x4.
2006-03-13 00:33:11.93 Server Error: 17182, Severity: 16, State: 1.
2006-03-13 00:33:11.93 Server TDSSNIClient initialization failed with error 0xd, status code 0x1.
2006-03-13 00:33:11.93 Server Error: 17826, Severity: 18, State: 3.
2006-03-13 00:33:11.93 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2006-03-13 00:33:11.93 Server Error: 17120, Severity: 16, State: 1.
2006-03-13 00:33:11.93 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I know this may look like the VIA problem, but look at the first status code. It's 0x4 and not 0x36.
Any clues?
Best regards,
Paulo
View 1 Replies
View Related
Mar 5, 2008
HI all,
i can't start my sql server 2005 with 'networkservice' account. The protocols i enable are shared memory, named pipes and tcp/ip respectively.
the event view log some information:
UpdateUptimeRegKey: Operating system error 5(Access is denied.) encountered.
And i got other from errorlog file:
2008-03-05 16:17:37.90 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 2)
2008-03-05 16:17:37.90 Server (c) 2005 Microsoft Corporation.
2008-03-05 16:17:37.90 Server All rights reserved.
2008-03-05 16:17:37.90 Server Server process ID is 3344.
2008-03-05 16:17:37.90 Server Authentication mode is MIXED.
2008-03-05 16:17:37.90 Server Logging SQL Server messages in file 'D:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2008-03-05 16:17:37.90 Server This instance of SQL Server last reported using a process ID of 3808 at 3/5/2008 4:09:15 PM (local) 3/5/2008 8:09:15 AM (UTC). This is an informational message only; no user action is required.
2008-03-05 16:17:37.90 Server Registry startup parameters:
2008-03-05 16:17:37.90 Server -d D:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2008-03-05 16:17:37.90 Server -e D:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2008-03-05 16:17:37.90 Server -l D:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2008-03-05 16:17:37.92 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2008-03-05 16:17:37.92 Server Detected 2 CPUs. This is an informational message; no user action is required.
2008-03-05 16:17:38.51 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2008-03-05 16:17:38.62 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2008-03-05 16:17:38.62 Server The time stamp counter of CPU on scheduler id 1 is not synchronized with other CPUs.
2008-03-05 16:17:40.98 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2008-03-05 16:17:40.98 Server Database mirroring has been enabled on this instance of SQL Server.
2008-03-05 16:17:40.99 spid5s Starting up database 'master'.
2008-03-05 16:17:41.13 spid5s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2008-03-05 16:17:41.29 spid5s SQL Trace ID 1 was started by login "sa".
2008-03-05 16:17:41.32 spid5s Starting up database 'mssqlsystemresource'.
2008-03-05 16:17:41.34 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2008-03-05 16:17:41.48 spid5s Server name is 'stswordmanMSSQLSERVER3'. This is an informational message only. No user action is required.
2008-03-05 16:17:41.48 spid9s Starting up database 'model'.
2008-03-05 16:17:41.77 spid9s Clearing tempdb database.
2008-03-05 16:17:42.54 spid9s Starting up database 'tempdb'.
2008-03-05 16:17:42.63 spid12s The Service Broker protocol transport is disabled or not configured.
2008-03-05 16:17:42.63 spid12s The Database Mirroring protocol transport is disabled or not configured.
2008-03-05 16:17:42.70 spid12s Service Broker manager has started.
2008-03-05 16:17:42.71 Server A self-generated certificate was successfully loaded for encryption.
2008-03-05 16:17:42.71 Server Server local connection provider is ready to accept connection on [ \.pipeSQLLocalMSSQLSERVER3 ].
2008-03-05 16:17:42.71 Server Server named pipe provider is ready to accept connection on [ \.pipeMSSQL$MSSQLSERVER3sqlquery ].
2008-03-05 16:17:42.79 Server Server is listening on [ 127.0.0.1 <ipv4> 1361].
2008-03-05 16:17:42.79 Server Dedicated admin connection support was established for listening locally on port 1361.
2008-03-05 16:17:42.79 Server SQL Server is now ready for client connections. This is an informational message; no user action is required.
2008-03-05 16:17:43.24 spid16s Starting up database 'msdb'.
2008-03-05 16:17:43.24 spid17s Starting up database 'MSDNTHREAD'.
2008-03-05 16:17:43.56 spid5s Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required.
2008-03-05 16:17:43.56 spid5s Recovery is complete. This is an informational message only. No user action is required.
2008-03-05 16:19:39.68 spid12s Service Broker manager has shut down.
2008-03-05 16:19:39.93 spid5s SQL Server is terminating in response to a 'stop' request from Service Control Manager. This is an informational message only. No user action is required.
2008-03-05 16:19:39.93 spid5s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
View 6 Replies
View Related
Jun 5, 2007
I am running SQL Server 2005 Developer edition. However, I can't get it to start up.In the SQL Server Configuration Manager it states that 'Start Mode' is automatic. However this doesn't seem to be the case. Since when I turn on the machine its current state is 'Stopped'Then when I try to rick click and start the service, after a short time (~20s) I get the following message;"The request failed or the service did not respond in a timely fashion. Consult the event log or other other applicable error logs for details"I've had a search around however, I've not managed to find the error log. Where is this? or any other suggestions would be appreciated. I'm tempted to just start again and reinstall. However, I would rather understand what the problem is.Dougal
View 1 Replies
View Related
Feb 10, 2008
I can't connect to SQL Server 2005 Express. I've only just noticed this problem but I have not been using it (SQL Server) for a while as this problem is on my home machine which I have not recently used.
When I open SQL Management Studio I can't connect at all using any of the protocols with Windows Authentification. (Shared Memory / TCP-IP / Named Pipes) nor have I tried SQL authentification as I don't remember the admin password.
I have made some changes to this PC recently.1) Installing VS2008 pro trial from the DVD download.2) I added a DVD writer with associated software Nero (but I just uninstalled the Nero software because it gave me a feature I hadn't asked for - the desktop search - which takes tons of memory)3) Running the network setup network wizard from a floppy. This PC is on a LAN connected via a Workgroup.4) Added PC Tools Spyware Doctor.5) I upgraded the RAM to 1.0 Gb.
I can't say for sure that SQL Server was working or broken after any of those changes above. Any or none of them could've caused the problem.
When I upgraded the RAM it was initially faulty and I had to put a different RAM module in.
I can't even run 'SQL Server Error and Usage Reporting'. When I try to run it, after an initial dialog opens I see nothing.
Nor can I run SQL Server 2005 surface Area Configuration to "Add New Administrator". I get the same error (see below) telling me that I can't connect.
Nor was I able to run any of the SQL Server sp1 downloads - I get told that all SQL server components are already installed.
This is running on an ASROCK mobo with an AMD Althon XP 2000+ cpu, 1.67GHz, 1 Gb RAM, Win XP sp2 with just about all the microsoft patches apart from IE7 (I'm still using IE6 on this PC).
This doesn't look like it has a solution. Should I uninstall SQL Server completely and then try to reinstall it?
--------Error 1 - The error I get when I try to connect--------
------------------------------TITLE: Connect to Server------------------------------Cannot connect to ASROCKSQLEXPRESS.------------------------------ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Shared Memory Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
--------Error 2 - C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG--------
2008-02-10 18:15:50.89 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Express Edition with Advanced Services on Windows NT 5.1 (Build 2600: Service Pack 2)
2008-02-10 18:15:50.89 Server (c) 2005 Microsoft Corporation.2008-02-10 18:15:50.89 Server All rights reserved.2008-02-10 18:15:50.89 Server Server process ID is 1764.2008-02-10 18:15:50.89 Server Authentication mode is WINDOWS-ONLY.2008-02-10 18:15:50.89 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.2008-02-10 18:15:50.89 Server This instance of SQL Server last reported using a process ID of 1756 at 10/02/2008 17:54:18 (local) 10/02/2008 17:54:18 (UTC). This is an informational message only; no user action is required.2008-02-10 18:15:50.89 Server Registry startup parameters:2008-02-10 18:15:50.89 Server -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf2008-02-10 18:15:50.89 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG2008-02-10 18:15:50.89 Server -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf2008-02-10 18:15:50.93 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.2008-02-10 18:15:50.93 Server Detected 1 CPUs. This is an informational message; no user action is required.2008-02-10 18:15:51.18 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.2008-02-10 18:15:51.23 Server Database mirroring has been enabled on this instance of SQL Server.2008-02-10 18:15:51.26 spid5s Starting up database 'master'.2008-02-10 18:15:51.62 spid5s SQL Trace ID 1 was started by login "sa".2008-02-10 18:15:51.67 spid5s Starting up database 'mssqlsystemresource'.2008-02-10 18:15:51.71 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required.2008-02-10 18:15:52.14 spid5s Using 'dbghelp.dll' version '4.0.5'2008-02-10 18:15:52.15 spid5s ***Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGSQLDump0011.txt2008-02-10 18:15:52.15 spid5s SqlDumpExceptionHandler: Process 5 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.2008-02-10 18:15:52.15 spid5s * *******************************************************************************2008-02-10 18:15:52.15 spid5s *2008-02-10 18:15:52.15 spid5s * BEGIN STACK DUMP:2008-02-10 18:15:52.15 spid5s * 02/10/08 18:15:52 spid 52008-02-10 18:15:52.15 spid5s *2008-02-10 18:15:52.15 spid5s *2008-02-10 18:15:52.17 spid5s * Exception Address = 0119BEF9 Module(sqlservr+0019BEF9)2008-02-10 18:15:52.17 spid5s * Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION2008-02-10 18:15:52.17 spid5s * Access Violation occurred reading address 000000002008-02-10 18:15:52.17 spid5s * 2008-02-10 18:15:52.17 spid5s *2008-02-10 18:15:52.17 spid5s * MODULE BASE END SIZE2008-02-10 18:15:52.17 spid5s * sqlservr 01000000 02C09FFF 01c0a0002008-02-10 18:15:52.17 spid5s * ntdll 7C900000 7C9AFFFF 000b00002008-02-10 18:15:52.17 spid5s * kernel32 7C800000 7C8F4FFF 000f50002008-02-10 18:15:52.17 spid5s * MSVCR80 78130000 781CAFFF 0009b0002008-02-10 18:15:52.17 spid5s * msvcrt 77C10000 77C67FFF 000580002008-02-10 18:15:52.17 spid5s * MSVCP80 7C420000 7C4A6FFF 000870002008-02-10 18:15:52.17 spid5s * ADVAPI32 77DD0000 77E6AFFF 0009b0002008-02-10 18:15:52.17 spid5s * RPCRT4 77E70000 77F01FFF 000920002008-02-10 18:15:52.17 spid5s * Secur32 77FE0000 77FF0FFF 000110002008-02-10 18:15:52.17 spid5s * USER32 7E410000 7E49FFFF 000900002008-02-10 18:15:52.17 spid5s * GDI32 77F10000 77F56FFF 000470002008-02-10 18:15:52.17 spid5s * CRYPT32 77A80000 77B13FFF 000940002008-02-10 18:15:52.17 spid5s * MSASN1 77B20000 77B31FFF 000120002008-02-10 18:15:52.17 spid5s * MSWSOCK 71A50000 71A8EFFF 0003f0002008-02-10 18:15:52.17 spid5s * WS2_32 71AB0000 71AC6FFF 000170002008-02-10 18:15:52.17 spid5s * WS2HELP 71AA0000 71AA7FFF 000080002008-02-10 18:15:52.17 spid5s * USERENV 769C0000 76A72FFF 000b30002008-02-10 18:15:52.17 spid5s * opends60 333E0000 333E6FFF 000070002008-02-10 18:15:52.17 spid5s * NETAPI32 5B860000 5B8B3FFF 000540002008-02-10 18:15:52.17 spid5s * SHELL32 7C9C0000 7D1D5FFF 008160002008-02-10 18:15:52.17 spid5s * SHLWAPI 77F60000 77FD5FFF 000760002008-02-10 18:15:52.17 spid5s * comctl32 773D0000 774D2FFF 001030002008-02-10 18:15:52.17 spid5s * comctl32 5D090000 5D129FFF 0009a0002008-02-10 18:15:52.17 spid5s * psapi 76BF0000 76BFAFFF 0000b0002008-02-10 18:15:52.17 spid5s * instapi 48060000 48069FFF 0000a0002008-02-10 18:15:52.17 spid5s * sqlevn70 4F610000 4F7B8FFF 001a90002008-02-10 18:15:52.17 spid5s * SQLOS 344D0000 344D4FFF 000050002008-02-10 18:15:52.17 spid5s * rsaenh 00E20000 00E47FFF 000280002008-02-10 18:15:52.17 spid5s * AUTHZ 776C0000 776D0FFF 000110002008-02-10 18:15:52.17 spid5s * MSCOREE 79000000 79045FFF 000460002008-02-10 18:15:52.17 spid5s * ole32 774E0000 7761CFFF 0013d0002008-02-10 18:15:52.17 spid5s * msv1_0 77C70000 77C92FFF 000230002008-02-10 18:15:52.17 spid5s * iphlpapi 76D60000 76D78FFF 000190002008-02-10 18:15:52.17 spid5s * kerberos 71CF0000 71D3AFFF 0004b0002008-02-10 18:15:52.17 spid5s * cryptdll 76790000 7679BFFF 0000c0002008-02-10 18:15:52.17 spid5s * schannel 767F0000 76816FFF 000270002008-02-10 18:15:52.17 spid5s * security 71F80000 71F83FFF 000040002008-02-10 18:15:52.17 spid5s * dbghelp 340F0000 34204FFF 001150002008-02-10 18:15:52.17 spid5s *2008-02-10 18:15:52.17 spid5s * Edi: 00000008: 2008-02-10 18:15:52.17 spid5s * Esi: 00000000: 2008-02-10 18:15:52.17 spid5s * Eax: 00000000: 2008-02-10 18:15:52.17 spid5s * Ebx: 00000000: 2008-02-10 18:15:52.17 spid5s * Ecx: 00000000: 2008-02-10 18:15:52.17 spid5s * Edx: 00000000: 2008-02-10 18:15:52.17 spid5s * Eip: 0119BEF9: 428B168B FFCE8B08 8B168BD0 44890C52 448D1C24 8B502024 2008-02-10 18:15:52.17 spid5s * Ebp: 33A6DDAC: 33A6DE80 0119D555 037F0670 002B0000 00010000 00000000 2008-02-10 18:15:52.17 spid5s * SegCs: 0000001B: 2008-02-10 18:15:52.17 spid5s * EFlags: 00010246: 004D005C 00630069 006F0072 006F0073 00740066 00530020 2008-02-10 18:15:52.17 spid5s * Esp: 33A6DD78: 037F05E0 002B0000 00000001 0377A8F8 000000C0 00000100 2008-02-10 18:15:52.17 spid5s * SegSs: 00000023: 2008-02-10 18:15:52.17 spid5s * *******************************************************************************2008-02-10 18:15:52.17 spid5s * -------------------------------------------------------------------------------2008-02-10 18:15:52.17 spid5s * Short Stack Dump2008-02-10 18:15:52.17 spid5s 0119BEF9 Module(sqlservr+0019BEF9)2008-02-10 18:15:52.17 spid5s 0119D555 Module(sqlservr+0019D555)2008-02-10 18:15:52.17 spid5s 0119D720 Module(sqlservr+0019D720)2008-02-10 18:15:52.17 spid5s 0119D8EC Module(sqlservr+0019D8EC)2008-02-10 18:15:52.17 spid5s 0119D9C0 Module(sqlservr+0019D9C0)2008-02-10 18:15:52.17 spid5s 01013785 Module(sqlservr+00013785)2008-02-10 18:15:52.17 spid5s 0108A224 Module(sqlservr+0008A224)2008-02-10 18:15:52.17 spid5s 0133E6D8 Module(sqlservr+0033E6D8)2008-02-10 18:15:52.17 spid5s 010A0030 Module(sqlservr+000A0030)2008-02-10 18:15:52.17 spid5s 0133D8F8 Module(sqlservr+0033D8F8)2008-02-10 18:15:52.17 spid5s 0108C2D1 Module(sqlservr+0008C2D1)2008-02-10 18:15:52.17 spid5s 0108C44C Module(sqlservr+0008C44C)2008-02-10 18:15:52.17 spid5s 0195F1A5 Module(sqlservr+0095F1A5)2008-02-10 18:15:52.17 spid5s 0195F477 Module(sqlservr+0095F477)2008-02-10 18:15:52.17 spid5s 012FB17F Module(sqlservr+002FB17F)2008-02-10 18:15:52.17 spid5s 01363A66 Module(sqlservr+00363A66)2008-02-10 18:15:52.17 spid5s 019631B6 Module(sqlservr+009631B6)2008-02-10 18:15:52.17 spid5s 019633D7 Module(sqlservr+009633D7)2008-02-10 18:15:52.17 spid5s 015A6084 Module(sqlservr+005A6084)2008-02-10 18:15:52.17 spid5s 021ABB36 Module(sqlservr+011ABB36)2008-02-10 18:15:52.17 spid5s 010077A6 Module(sqlservr+000077A6)2008-02-10 18:15:52.17 spid5s 010078CC Module(sqlservr+000078CC)2008-02-10 18:15:52.17 spid5s 010075DC Module(sqlservr+000075DC)2008-02-10 18:15:52.17 spid5s 010B94A5 Module(sqlservr+000B94A5)2008-02-10 18:15:52.17 spid5s 010B939C Module(sqlservr+000B939C)2008-02-10 18:15:52.17 spid5s 010B9064 Module(sqlservr+000B9064)2008-02-10 18:15:52.18 spid5s 010B9201 Module(sqlservr+000B9201)2008-02-10 18:15:52.18 spid5s 781329BB Module(MSVCR80+000029BB)2008-02-10 18:15:52.18 spid5s 78132A47 Module(MSVCR80+00002A47)2008-02-10 18:15:52.18 spid5s Stack Signature for the dump is 0xACA46EE02008-02-10 18:15:52.51 spid5s External dump process return code 0x20002001.The error information has been submitted to Watson error reporting.
2008-02-10 18:15:52.51 spid5s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.2008-02-10 18:15:52.85 Server A self-generated certificate was successfully loaded for encryption.2008-02-10 18:15:52.85 Server Server local connection provider is ready to accept connection on [ \.pipeSQLLocalSQLEXPRESS ].2008-02-10 18:15:52.87 spid8s Starting up database 'model'.2008-02-10 18:15:52.87 Server Server local connection provider is ready to accept connection on [ \.pipeMSSQL$SQLEXPRESSsqlquery ].2008-02-10 18:15:52.87 Server Dedicated administrator connection support was not started because it is not available on this edition of SQL Server. This is an informational message only. No user action is required.2008-02-10 18:15:52.87 Server SQL Server is now ready for client connections. This is an informational message; no user action is required.
View 2 Replies
View Related
Dec 9, 2005
I am newbie to 2005 technologies.I have recently downloaded VWD 2005.I am running it and it is working quite well.
Now After downloading sql server express(2005).I don't now how to start and use it.
In Pogram file I have
MS SQL server 2005
Console Application
SQL Server Configuration Manager
SQL
Server Error and Usage Reporting
SQL
Server Surface Area Configuration
As Far as I Know it should be under ( SQL Server Configuration Manager) where I can add database query analyzer and other stuff.As I see in the launch seminar.
Please Could any body Give me a link where I can have a picturial tutorial aur video.So I can get Started
Thanks in advance
View 2 Replies
View Related
May 30, 2006
Hi,
I can't find an equivalent version of 2000's Service Manager with which to start the DB server.
Management Studio is only showing my SQL Server 2000 databases.
Cheers, WT.
View 1 Replies
View Related
Mar 4, 2002
Is there any way to reconfigure SQLSERVER if the name of the server was changed after the initial installation of Sql was completed?
View 2 Replies
View Related
Aug 22, 1999
Hi !
I have problem when I'm trying to start SQL-server on a remote machine.
I'm trying to execute a script in the remote machine, the script looks like this:
P:>type j3.bat
c:mssqlinnsqlservr /dc:mssqldataMASTER.DAT
Then I get this message in the eventlog :
Mesg 18491 : Unable to start due to invalid serial number.
Does anyone have a clue about what this can be ?
View 1 Replies
View Related
