hello my freands
i attached my database on 3 computer those are stand alone.
i get backup form those separately .
now,i have 3 backup files,with name:
"bkcomputer1.bak","bkcomputer2.bak" and "bkcomputer3.bak"
i want merge these,and make new file with new name "master"
and restore to new computer
my code for restor is:
restore database [mydatabase] from disk='c:kupcomputer1.bak'
restore database [mydatabase] from disk='c:kupcomputer2.bak'
restore database [mydatabase] from disk='c:kupcomputer3.bak'
but this way is false,because each restore deleted structure and data old data base,therefore after compile 3 over line,i have only data of computer3
please help me....
thanx
We have a file where my co-employee backup's our database. The problem is that the file is getting too large because he always use APPEND when he backup's. Is there a way to delete some of the appended backup instances? Thank you very much for your help.
appending new backup on a same device - yes or no?
if somebody can tell me, is ok to constantly create new backus on a same device? i'm asking that, because in that case, defice file it will grow and grow.
is there any limit or suggestions how many appending is recomended, cause of file growth?
BACKUP DATABASE [myDB] TO DISK = N'f:BACKUPSDailymyBKUP.bak' WITH NOINIT , NOUNLOAD , NAME = N'mybackup', NOSKIP , STATS = 10, NOFORMAT
It runs just fine but in append Mode (the default one); the bak file is being taped every night, so I would like to overwrite it, in order it not to become huge after a few time, but I can't seem to find a clear way to do this.
Hi All:Being a bit of a nube to MSSQL I could use a little advice. This is thesituation.A client's HDD became full so I backed up, deleted then recreated a blankdatabase (they said they didn't need the stored data).They have now deceided that they want the data again.My plan is to restore the database to a second volume so it can grow as muchas is needed, however, there is now data in the second instance that wouldneed importing to the restored DB.I can restore the backed up db with a different name and reconfigure thesoftware that accesses it but what would be the best method to append therestored DB with the data in the current instance of said DB? Both DBs areidentical.TIAMP
I have a database on sqlserver 2005.I usually take a full db backup and sequential transaction log backups and append each of the backups it to a backup file.Now if i want to copy my second transaction log file to a specific folder on my server.Do we have any procedure to do it.
1- I have created a backup device 2- I have created a maintenance plan full backup and run it - with overwrite option on the backup device 3- I have created a maintenance plan differential backup and run it with append option on the same file of backup device 4- I have created a maintenance plan log backup with append option on the same backup device
When I made restore database from the backup device i found three files the full and differential and log backup
5- I ran again the differential backup maintenance plan ( suppose to be ran everyday night )
when i made restore database I found only two backups the full and the last differential !!!
what I want to do is to take a full backup every week , append differential backup everyday and append log backup every hour
when I ran the last differential backup it erased the first differential and log backups, why is this happening and how to apply this scenario and keep the all differential backups on the same backup device .
I am looking for a SQL Backup/Restore tools which can restore multiple environments. Here is high level requirements.
1. We have 4 DBs, range from 1 TB - 1.5 TB Each Database. When we restore to QA, DEV, or Staging, we usually restore 4 of them. 2. I am looking for the speed to complete restoring between 1 - 2 hours for 4 DBs.
I am evaluating the Dephix Software but the setup is very complex and its given us a lot of issues with Windows Authentions, and failure in the middle of the backup. I used Guess Software many years ago but can't find it on the web site any more. Speed is very important for us mean complete restoring as fast as possible. We are on SQL 2012 and SQL 2008 R2.We are currently using NETAPP Technology and I have Redgate Backup Tool but I am mainly looking for fast Restore Process.
Data got deleted on Friday evening, need to have database restored to FRiday afternoon and also some data has been entered on Monday, which needs to be there.
I should restore a SQL Server 2005 Database from backup. The backup contains three files, named user.bak0, user.bak1 and user.bak2.
How is the syntax of the restore filelistonly and the restore database ... ?
I usualy write restore filelistonly from disk = 'path and filenam.bak' restore database. zy from disk = 'path and filename.bak' with replace, move..... move....
This works but I cannot use it with a splitted backup file. The files are much too big to put together to one file.
I neglected to backup the transaction log as part of the process of backing up the database. Now i only have the backup file for the database and no transaction log backup. When i try to do a restore on the database, i get the error on a "tail log missing" message (which i'm assuming is that it's looking for the t-log backup?).
Is it possible to restore or even restore to a new database? I'm only looking to retreive data from 2 tables within the backup file.
I know the basic defiinition of these two options, but i am not very clear why would someone choose one over another, currently I am using Append to Media option, and every day backup, I see my backup files growing in size.
can someone give me nice example about these two options,
I had to replace my hard drive which was going bad. I reinstalled Sql 2005 and now need to restore the backup that I have. I selected Restore Database and chose From Device, and selected the backup location on J: drive and selected the backup file which has no extenstion. I checked the checkbox next to the backup set to restore. Click OK and then I get this error message: Restore failed for Server System.Data.SqlClient.SqlError: Directory lookup for the file "C:Program FilesMicrosoft SQL ServerMSSQLdataMyDB_Data.MDF" failed with the operating system error 3(The system cannot find the path specified.). (Microsoft.SqlServer.Smo) I don't know why it is looking for a MDF file as this was never in the Backup folder. Can someone please help me on this? I thought I was doing the right thing making a backup all along and now I can't restore it!
Is it possisable to restore from tape when the backup was taken from a different server. ServerA has the tape drive which performs the backups to tape, but ServerB which is under a different domain wants to restore ServerA database on ServerB, both databases on the two servers are the same is it possiable to restore a database on ServerB using ServerA file?
hello all !! I suffered a crash on one of my disks on a server runing MS-sql 7.0,and found out my backupexec dosnt really restore a runing version of my database. which solution would you recomend ,taking in acount i may have a copy of the database on another computer,which files i can restore? thanks yochai lam
Hi I am operating my databases under "trunc log on checkpoint" mode as I do not need point of failure recoverability.I was performing a recovery test using a backup which resulted in it being unsuccessful .Error Message received was "Recovery has failed because a nonlogged operation could not be redone.Use the RESTORE statement to restore all data in filegroup PRIMARY to a pt beyond the nonlogged changes"
Isnt sql*server supposed to prevent a non-logged operation while a backup is in progress?Also how do i prevent such a situation from recurring. If i switch to single user mode before a backup how do i prevent exisiting users from accessing ... without bouncing my sql*server?
I did a restore of database the user the original database is admin where it says the user is dbo.
After i did the restore i was able to add admin as user and dbowner but when i tried to change the user it said the user already exists.
How do i create the same..enviroment as or the original system with users..i saw a problem i i drop the user and them recreate it then it cannot find the object or the object which are owned by it are lost..could any one help me with this ...so as how to and what do i need to keep track of while restoring the database and configure the server back with same user names and permissions.
I have two databases on two different SQL Servers,our application is updating these two databases simultaniously.So every time these two databases will be in synchronized state. Now i want to schedule backup for these two Databases.How can i take backup of these two databases at single point of time. so that if i restore these two backups on corresponding servers,There should not be any conflicts.
Server: Msg 3201, Level 16, State 1, Line 1 Cannot open backup device 'NetworkDevice'. Device error or device off-line. See the SQL Server error log for more details. Server: Msg 3013, Level 16, State 1, Line 1 Backup or restore operation terminating abnormally.
I don't really understand what's goin.
basically i need to synchronize my production database so what am i planning is to take a full backup on that server everynight and then restore it back.
Can some one guide me to take a backup as well as restore on the remoteserver with syntax and what does it mean to add a device...i could not understand.
Is there any other process that's much faster to implement.
Whenever I restore a backup on sqlserver 7.0 and create a new database from it, I always end up having problems with the users existing in the backup.
To enable those users to have access, I end up creating logins with those names and when I try granting those users Database access, I get the error message that the user already exists in the database.
Could some one tell me the right way to restore the backup and having all the users of the database also restored in the proper manner.
WE are using sqlserver 7.0 & backing full database using Seagate backup ver 7.2 on a tape drive.
I have following questions if anybody could help
1]How do I restore a single table backup from the tape backup without restoring the full database first on the disk & then running import/export utility to transfer/ copy that particular table to production database. Is there any third party backup utility which allows for a single / selected table restore?
2]What are the steps or if anybody has the script for tansfering logins/users with permisssions & without deencrypting the passwords when transfering from one server to another server.
Hi there, I am new to administration. i would like to create a development environment out of production database. for this i have to backup the production database on a regular basis. then use this backup and restore it to a database on different. i can do this task, but i want to automate this task to do it on regular basis. i would like to schedule my backup time. and immediately after backup i want to restore it to the database on other server, over writing existing data. what is the best way to do this???
I have a question related to SQL 6.5. We have a SMS 1.2 server which uses SQL 6.5. Two months ago, one of the NT admins did a NT backup of SMS database(sms.db) and then formatted the HD. Now, we need the SMS server back again. We installed the NT server, SMS server snd SQL server on that machine. The problem is, we now want the SQL server to recognize our SMS database (SMS.db file). We don't have any SQL backup of any database (that means, no copy of master database, no copy of other databases. IS THERE A WAY TO RECOVER SO THAT SQL SERVER RECPGNIZE THE SMS DATABASE(SMS.DB FILE) Please help me out. I would really appreciate that Jazib Frahim
I have a database xxxx on server a, I want to copy this DB to server b.How can I do this By back and restore. WHere can take this back up?I want to take this to a personal folder and wanted to restore to server b from this folder.Is it possible? Thanks.
I have 2 databases namely A & B respectively..... I have written a stored procedure that takes the backup of database A ....... Both the databases are operational .... Can I restore this Backup of Database A ...to Database B .... Is it possible. ....
I have read soimething that we can do it but with the Restore command we have to use the with move option...
I dont seem to understand this can someone please help me on this one....
I am trying to restore the backup from enterprise management studio i have selected the source of resource from device.Its not displaying the mdf etc files in the select the backup sets to restore..
Hi everyoneI have this situation with backup and restore.I have two instances of sql, sql1 and sql2.Production server is sql1 and test server is sql2.I created database maintenance plan that makes full backup every nighton tape.I would like to make some kind of job or to add steps to job that wascreated with DMplan which will make restore of backuped database to sql2server.How can i do this? How can i read which is the last file backuped ontape?Thanks very muchAlex*** Sent via Devdex http://www.devdex.com ***Don't just participate in USENET...get rewarded for it!
I've been working developing database on my PC @ work, and sadly enough would like to spend some time on it at home. To these ends I backed up the database at work where it restored fine. However have tried to restore the file at home and am getting an error saying the operating system cannot access the file. Is this something to do with NTFS permissions?
