Just to confirm, do identity columns and XML columns work OK with database mirroring ? That is, all data types are supported with mirroring, and identities aren't an issue ?
Transactional replication with identity columns was a right pain in the **** in SQL 2000. I'm assuming that mirroring doesn't have these issues, but want to be sure.
Hi,
I am planning to use transacational replication (instead of merge replication) on my SQL server 2000. My application is already live and is being used by real users.
How can I ensure that replicated data on different server would have exact same values of identity columns and date columns (where every I set default date to getdate())?
It is very important for me to have a mirror image of data (without using clustering servers).
Any help would be appreciated.
Thanks,
-Niraj
Hello:
I am running into an issue with RS2k PDF export.
Case: Exporting Report to PDF/Printing/TIFF
Report: Contains 1 table with 19 Columns. 1 column is static, the other 18 are visible at the users descretion. Report when printed/exported to pdf spans 2 pages naturally, 16 on the first page, 3 on the second, and the column widths have been adjusted to provide a perfect page span .
User A elects to hide two of the columns, and show the rest. The report complies and the viewable version is perfect, the excel export is perfect.. the PDF export on the first page causes every fith column, starting with the last column that was hidden to be expanded to take up additional width. On the spanned page, it renders the first column on that page correctly, then there is a white space gap equal to the width of the hidden columns and then the rest of the cells show with the last column expanded to take up the same width that the original 2 columns were going to take up, plus its width.
We have tried several different settings to see if it helps this issue or makes it worse. So far cangrow/canshrink/keep together have made no impact. It is not possible to increase the page size due to limited page size selection availablility for the client. There are far too many combinations of what the user can elect to show or hide to put together different tables to show and hide on the same report to remove this effect.
Any help or suggestion on this issue would be appreciated
Can anyone describe how SQLServer calculates identity
columns? Does it use some internal counter when generating the next identity,
or something a little more mundane such as gets the highest existing identity
value at the point of the insertion and increments it by the IDENT_INCR value
of the identity column?I’m not worrying about reliability or gaps in values, but i
am wondering if it would be less efficient for me to manually manage the
identity/primary key in the form of a counter in another table used to generate
the new identity, or simply let the DB do it for me. I dont mind if there are
gaps in the sequence etc. so would it be less efficient for me to calculate the
field than SQLServer itself? Basically, is the overhead to the DB of me doing
it greater than the overhead of the app doing it...Thanks
First off I am NOT a DBA.
I have a question about IDENTITY columns. I am working for a client that has an entire employee database that uses IDENTITY columns without any Primary keys defined. I have never seen this done. Is it ok or should I recommend that it be changed to use Primary keys?
The DBA that built the database is no longer with the company and the client has no DBA. Where can I get some information on how to use IDENTITY columns? I did not get much from the help file.
TIA
Nate
Where do I find the seed and increment values of the identity column in database.
If possile can u suggest query for that Pl.
Thanx in advance
-ali
I have been using the following query to identify the IDENTITY columnsin a given table. (The query is inside an application.)select column_namefrom information_schema.columnswhere table_schema = 'user_a' andtable_name = 'tab_a' andcolumnproperty(object_id(table_name), column_name, 'IsIdentity') = 1This works. When "user_a" performs the query, everything is OK.Now, another user wanted to use the same application. So, "user_b"clicks on a button, and the exact same query as above is run. (Nosubstitutions are made; user_b is trying to see the identity column in[user_a].[tab_a]). However, the query returns null, instead of theidentity column name. User_b can read the table and select from itjust fine.Why am I getting two different results against the same query? Do Ineed to rewrite the query to go against different information schemaviews?
View 5 Replies View RelatedI'm seeing some weird behavior regarding identity columns in MSSQL 2000.In a specific client database we have this table:
ID Name SecLevDG Flags ----------- ----------------- ----------- ----------- 1029528 xxx 0 01029529 xxx 0 01049676 xxx 0 0
While upgrading this database to a later version of our product, some schema changes are necessary. For this particular table, the changes are
alter table Authority drop constraint apkAuthorityId
alter table Authority drop column SecLevDg
alter table Authority add new_id integer identity
This code has worked perfectly for years, and even in this particular database, there are no error messages. However, the result isn't quite the expected:
ID Name Flags new_id ----------- ---------------- ----------- ----------- 1029528 xxx 0 167772201029529 xxx 0 167772201049676 xxx 0 16777220
Notice that the new column did NOT get unique values 1, 2, 3, etc... In other tests I manage to get different values, but still not the expected ones. Is this a bug in MSSQL 2000?
DBCC CHECKIDENT returns:
Checking identity information: current identity value '1', current column value '1'.
DBCC CHECKDB returns no errors before running the above statement. Afterwards it returns this (only relevant messages included):
Server: Msg 8970, Level 16, State 1, Line 1
Row error: Object ID 293576084, index ID 0, page ID (1:277), row ID 0. Column 'new_id' was created NOT NULL, but is NULL in the row.
Server: Msg 8970, Level 16, State 1, Line 1
Row error: Object ID 293576084, index ID 0, page ID (1:277), row ID 1. Column 'new_id' was created NOT NULL, but is NULL in the row.
Server: Msg 8970, Level 16, State 1, Line 1
Row error: Object ID 293576084, index ID 0, page ID (1:1145), row ID 0. Column 'new_id' was created NOT NULL, but is NULL in the row.
[...]
CHECKDB found 0 allocation errors and 3 consistency errors in table 'Authority' (object ID 293576084).
Regards,
Oskar Berggren
I have an app that has multiple users inserting and updating from a couple key tables using SQL Server 2005.
In my previous SQL coding life, I was able to make use of sequence.NextVal to find and lock the next available sequence value for a table. Currently I am in the SQL Server 2005 world and cannot do this. I have found all sorts of help for Ident_currentand Identity columns, but nothing on how to accomplish the same as a NextVal did. I can add one to the Ident_Curr but I think I run the risk of that value being used by another user before the current user can get his update in. Is that correct? Is there a way to accomplish what I am trying to do?
Basically what I need to do is when a user inserts a record in table "Loads" I need to insert behind the scenes to table "Comments" with the ID of the row created in the "Loads" table.
Thank you in advance,
Garth
Hello there,
I am using sql 2000 dts package to migrate a databse to SQL Server 2005, everything works except for identity columns, SQL Server reorder the columns, and this breaks the referential integrity. Is there a way to stop that? Your help is appreciated.
I use the identity = yes for my unique columns in most of my tables that need it. I am trying to decide if I should change identity = no, and instead manually update my unique number column myself by adding one when I insert new rows.
The reason I want to do this is for maintainabilty and ease of transfering data for backup to other sql servers. I always have trouble keeping the identity numbers to stay the same as they are in the original database because when they are transfered to a db that has identity = yes, the numbers get rearranged.
It will also make it easier to transfer data from original db to another sql server db and use the data right away without having to configure the destination db to disable identity and then enable it, etc.
Any pro's con's appreciated,
Dan
(Long post)
I have a production database with about half the tables using
IDENTITY columns for PRIMARY KEYS. This system is configured as both
a Publisher and a Distributor. We are using Transactional Replication
without updates. The SQL Server Agent runs every hour to pick up any
changes and replicate them to the Subscriber (another SQL Server
machine configured as our failover server).
Both servers are running SQL Server 7.0 (original, no service packs)
under Windows NT 4.0 (SP4).
The failover server (the replication Subscriber) will only be used if
the primary server goes down. And hopefully, only for a short time
before the primary server comes back online. During the time that the
failover is actually being used, the application will not make any
changes to the database.
The IDENTITY values that are replicated need to stay with their
original values. The replication process CANNOT assign new values to
these columns when there are inserted into the database on the
Publisher (i.e. failover server)
My question is: According to the documention, I can add 'NOT FOR
REPLICATION' to the IDENTITY columns and the values will be
preserved. But a collegue of mine says that resets the IDENTITY
sequence on the subscriber and the 2nd time a row gets inserted on
the Publisher, the values get messed up. On his system, he calls a
stored procedure for the tables with IDENTITY columns, and in the
stored procedure, he executes a 'SET IDENTITY_INSERT OFF', then
INSERTS the row, then 'SET IDENTITY_INSERT ON'. He claims that this
approach solved his issues with IDENTITY columns.
Who is right? Do I have to create a stored procedure for replication
for every table with an IDENTITY column, or can I just add 'NOT FOR
REPLICATION' and SQL Server will handle the rest?
NOTE: Upgrading to SQL Server 2000 is NOT an option right now.
Although, if a Service Pack for 7 fixes this, that might be an option.
Thanks in advance for any help you can shed on this issue.
Dave
We are trying to run replication from one server to another. Most of the tables in the publishing database have identity columns set. At one point the subscribing database had a match of identity columns and primary keys matching the publishing database. Obviously with a primary key set on the subscriber there would be conflicts with duplicate key inserts. We disabled the identity columms and droped the indexes and the data was able to replicate over. However, we discovered that the identity columns, which are used to generate id's on many of our tables, were not replicating over to the subscriber. In fact a null value was being inserted into the subsriber database.
Anyone seen this before? What, if there is one, is the solution?
Thanks,
Brad
hi there.
I was wondering is there any way that you can use an Identity Column on both a subcribing and Publishing table in Replication,
I am receiving errors when I run Replication with Identity Columns,
Thanks in advance
Fin
Hi folks! I've a merge replication setup b/w two servers.
Published tables have columns (INT IDENTITY SEED 1 INCREMENT[NOT FOR REPLICATION]).
Whenever i apply the SNAPSHOT, i have to run DBCC CHECKIDENT('table' RESEED) for each table at the subscriber twice, for the values in the columns are almost always greater than the ID-Seed value. For example the last Identity value in the column is 999 but whenever i insert a new row; i get error; couldn't insert duplicate value into the table. When i run the dbcc check i see the following message:
"Checking identity information: current identity value '1', current column value '999'."
How do i square this away?
Anyone know if MS-SQL Server supports IDENTITY columns that are incremented for each new value of the column it depends on.
For exameple:
Let's say I have a client table with a ClientID column as it's PRIMARY KEY.
This column can be an auto-incrementing IDENTITY column.
Then I have an orders table. The PRIMARY KEY for the orders table is composed of (ClientID, OrderID). I would like the OrderID to be an IDENTITY field that increments by an arbitrary value (1 in this case) for every new value of ClientID...therefore creating a unique PRIMARY KEY.
The contents of the table would look like this
ClientID OrderID
------- -------
1 0
1 1
2 0
1 2
2 1
2 2
1 3
and so on....
MySQL (and maybe other RDMS's...I haven't checked) seems to do this automatically when you set a column as AUTOINCREMENT and then define a composite PRIMARY KEY on two fields.
I know this can be done manually using triggers, but I was wondering if there was a better way...
Thanks in advance
Hi,
I noticed that tables containing IDENTITY columns skip IDENTITY values when a transaction is rolled back. Is there any way to avoid this? By "avoid" I mean make the table continue generating IDENTITY values from where the last COMMITTED insert took place.
Example:
CREATE TABLE ATable (A INT IDENTITY, B INT);
INSERT INTO ATable (B) VALUES (39);
INSERT INTO ATable (B) VALUES (51);
INSERT INTO ATable (B) VALUES (62);
INSERT INTO ATable (B) VALUES (93);
INSERT INTO ATable (B) VALUES (10);
ATable will now contain the following values:
A___B___
1___39__
2___51__
3___62__
4___93__
5___10__
Now let's say I do this:
BEGIN TRAN MyTranName;
INSERT INTO ATable (B) VALUES(44);
INSERT INTO ATable (B) VALUES(32);
INSERT INTO ATable (B) VALUES(11);
ROLLBACK TRAN MyTranName;
The three new rows won't (obviously) be in the table as my TRANSACTION was rolled back.
However, if I do this :
INSERT INTO ATable (B) VALUES (28);
INSERT INTO ATable (B) VALUES (52);
...My table will now contain the following values:
A___B___
1___39__
2___51__
3___62__
4___93__
5___10__
<I>NEW ENTRIES</I>
9___28__
10__52__
Is there a way to have SQL-Server continue from where it left off (IDENTITY VALUES 6, 7, 8) without having to generate the numbers manually or occasionnally turning on IDENTITY_INSERT on the relevant table(s)?
Thanks.
Hello,
In my application I am using Identity columns. When some rows are deleted from table, This identity values are not filling the gap. I mean My current identity is 5. That means 1 to 5 rows sequentially i inserted. If I am deleting 3rd and 4th rows, next identity will still continue with 6. So is there any method to fill the gap between rows
I have a stored procedure which gets data from several tables in database A and inserts them into the same tables in database B. Before the inserts are done, the data in database B is removed currently by using the TRUNCATE statement.
Unfortunately these tables are now being used for replication and you cannot TRUNCATE a table used for replication.
The issue is that these tables contain an Identity column each and using DELETE means the Identity columns will be incremented from the last value each time. I do not want this to happen.
Is there any way of reseeding an Identity column without using the DBCC CHECKIDENT statement because I do not want the procedures to run under the "sa" context if a DBCC statement was to be incorporated into the stored procedure with a DELETE statement?
many thanks for help
hi.i am using ms sql server 2000. can somebody tell me what the code would be to remove all the values in a given column and replace them with the associated number of the row with each execution. so, if i have a column:nums|1||2||3||4|and somebody deletes record |2|i would like the nums colum to update to|1||2||3|not:|1||3||4|it seems simple but i am having a hard time with this. how is it done?thanks.
View 14 Replies View RelatedNormally when I have a "Many-toMany" or linkage table where the primary key consists of a foreign key from two different tables, I do not bother to make a separate identiy column instead.Does anyone see a reason why an identity column would be more or less desireable ? For exampleTable Person PK - PersonIDTable Car PK - CarIDTable PersonCar PK (PersonID, CarID)Or would it be better to make an Identity Column such as PersonCarID so then the table would look like the following:Table PersonCarPK - (PersonCarID)FK - PersonIDFK - CarIDCreate Unique Constraint on Person and CarIDAny feedback is appreciated
View 46 Replies View RelatedWe have a high load site that requires some redesign. We would like to move the PK generation from a custom scheme to IDENTITY columns.
What are the any scalability issues for using IDENTITY? Will contention issues arise because of row locking?
Thanks in advance.
Is there a query I can write against an INFORMATION_SCHEMA or against the system tables to determine if a column is an identity column?
View 8 Replies View Related
Can a View include an identity column? If a view can include an identity column, how do you go about setting a column as an identity column.
Also how do you go about removing an identity property that may exist on column in a View
I am using SQL Server 2005.
How do i Find all Columns that have Identity Property in a database. That is i will like to know all columns in a database that are identity columns.
I am using SQL Server 2005. Thanks
Dear all,
We have an application that use merge replication between MSDE and Devices with SQL CE.
Due to a major application changes, we have to change our replication on all our workstation. Our process is the following:
- drop current replication
- recreate our replication
After first check our replication seems to work but after some test we have identify that all identity ranges have been reset on the workstation. As side effect, device start to reuse existing range and also existing value in the range.
- Have you ever encounter this type of issue?
- What can create it?
- Is our approach fully inappropriate?
Please let me know if you need more information,
Best regards,
I need gurus input on the pros and cons of Seeded(int) Identity colums vs. UniqueIdentifier(GUIDs) columns for my db design.
As I understand it, merging the data of 2 independent db's both using IDENTITY columns would be very hairy because of the possibility of overlap. GUIDs are much more likely to be unique across different servers.
What I'd like to hear from others are the other pros and cons of the situation. I of course understand the performance hit suffered at the hands of the GUID.
Thanks for your help!
Can a Primary Key column also be a Identity column? The reason I am asking this question is because I have created a table and each time I insert data into the Address Table I am also inserting the AddressID, how do I get the Primary Key (AddressID column) to self generate ID values.
View 9 Replies View RelatedI was reading this:
"Adding an identity column to a published table is not supported, because it can result in non-convergence when the column is replicated to the Subscriber. The values in the identity column at the Publisher depend on the order in which the rows for the affected table are physically stored. The rows might be stored differently at the Subscriber; therefore the value for the identity column can be different for the same rows."
I don't understand...
If I create a table with an identity column and publish it. Can the values on the subscriber be different when the data is replicated?
Suppose I have a this table:
1 Name1
2 Name2
3 Name3
Column 1 is identity field and column 2 the name of employees.
If I publish this table , the data can be inserted on the subscriber .pe, with 2 name1 and 1 name3 and 1 name2?
What about if the identify fields is a primary key?
Morning...
I've attempted several searches to find my answer but they're not quite the answer Im looking for.
We have a large VB6 system that currently sits on an informix database and I've been given the task of shifting it
onto SQL Server (Note: with as little impact to the code as possible - runtime speed will not be an issue at this early stage)
To cut a long story short, I'm hoping to find where relevent columns are shown as being an identity column.
I expected to see it in INFORMATION_SCHEMA.columns but its not in there (at least not that I can see)
Anyone point me in the right direction?
Cheers
Aaron.
I am having problem when performing the alter table switch. Both tables are identical and have pk.
ALTER TABLE SWITCH statement failed. There is no identical index in source table 'LocalDeltanet.dbo.testresults' for the index 'PKIDX_testSummary' in target table 'LocalDeltanet.dbo.testresults_part' .
CONSTRAINT [PKIDX_testSummary] PRIMARY KEY CLUSTERED
( [testresult_id] ASC )
WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON)
ON TResultsScheme (testresult_id) ) ON TResultsScheme (testresult_id)
I have performed the function on other tables successfully, but this is the first that has an identity column involved. Is there anything special that needs to be done?
[testresult_id] [int] IDENTITY(1,1) NOT NULL,
Hi all,
Just a silly wonder I had a few days ago:
I have a table named 'CustomerOrders' and I ponder between the posibilities of PrimaryKey(s) i can set :
1. CustomerId + OrderID - a two columns key providing exactly what i need (representing the actual relation).
2. CustOrderId - one column key with identity insert (so i could directly delete/update the record).
Which one should I choose and why? Would i gain anything by choosing one over the other?
Thanks in advance,
iTaY.
I have a demo database in SqlCE that I am getting ready to deploy. I deleted a bunch of test records and now want to reset the identity columns. The compact method runs fine, but the identity columns are not being reset? So when I add a new record, the returned identity value is over 1,000 even though the highest value is only 50.
Any help is greatly appreciated!
Kind Regards,
Mat