Hi,
I used sql task and other task,
i have only one sql task to capture all the error and send to mail
how to find which setp error occured
and what failture constraint carry
Ezhil
Hi,
I am administering several SQL Servers running SQL Server 2005 SP2 Build 3042.
I have a common maintenance plan that runs on each of the servers. The maintenance plan runs
fine on all the servers except for one. On the one server the Database Integrity check fails with the following error:
Check Database integrity on Local server connection
Databases: <list of databases>
Include indexes
Task start: 2008-02-21T00:05:42.
Task end: 2008-02-21T00:05:46.
Failed0) Alter failed for Server €˜XYZ€™
I created a test maintenance plan to just do the integrity check and selected one database only and this also failed with the same error message. I ran this test maintenance plan and configured it for each of the databases in question and it failed each time.
If I run the DBCC manually against the databases they all report fine.
I read some of the post that talked about the €œAllow Updates€? being set incorrectly but that does not apply to my problem since my configured and run values are set to 0.
Does anyone know what the problem could be?
I am working on a rewards program and I have a table whenever customer completes a trip, his total fare,business points earned for that particular trip and respective Promotional points gets inserted.
Now I have a scenario whenever customer business points accumulates to 10 then need to award 3 promotional points.
If Business Points=14 for a single trip then for the first 10 points respective Promo points will be awarded and the remaining 4 points should get carry forward for the next trip and this 4 points should get accumulated with the next trip Business Points and so on.
Basically need to check for every 10 Business points accumulated award some Promo points and carry forward remaining points.
Here is the sample table structure and data :
CREATE TABLE [dbo].[tblRedeems]
(
[Mobileno] [varchar](50) NOT NULL,
[TripNo] [int] NOT NULL,
[CustomerName] [varchar](50) NULL,
[TripEndTime] DATETIME NOT NULL,
[Code] .....
Help!!!
I want to install SQLExp2K5 with Advanced Services on a standalone basis on my Dell Inspiron XPS laptop (Win XP sp2, .NET 2.0; 2gb RAM; 8mb broadband; hardware firewall/router) so that I can learn SQL/VB/VWD, and want to use SQL E 2K5 without internet connectivity (at least until I know what the hell I'm doing!)
Really confused as to what component(s), and services I should/should not install - so I've listed my questions below:
1. Service Account: As I'm not on / dont have a domain, i presume using a domain user account is not an option for me. Should I use the Local Service account ? If so, what are/can be the issues in doing so?
2. Authentication Mode: Is Windows Authentication the one to use for a standalone install?; how would I enable the "sa" account and set an "sa" password? In fact, do I even need an"sa" account / password for a standalone, non internet connected install?
3. Components at install: Is it OK to install all components first off?
4. IIS: Is it possible to install IIS and not allow it access to the internet (or is this a stupid question -bearing in mind I dont really know what IIS is/does)
5: Business Intelligence Development Suite: How do I add BIDS once (IF) I manage to install SQLExp2K5-Adv.Ser,?
6. SQLExp2K5 Books on-line: Am I right in thinking that I should install this after installing SQLExp2K5?
7: Visual Basic Express/Visual Web Developer Express: Do these need to be configured seperately to work with SQLExp2K5?
Sorry about the length of this post, but have tried to be as clear as possible. Also apologise in advance for silly/stupid questions :)
All help and advice greatly appreciated.
Thanks,
sqlexpressbeginner
I cannot set a breakpoint in a Script task and have it complete successfully. I am running Vista 32-bit and only the workstation tools for SQL Server 2005 SP2. The steps to recreate are:
1) Create a new SSIS project/package.
2) Add a Script Task.
3) Set a breakpoint in the Script Task.
4) Run the package.
When I remove the breakpoint, the script task succeeds. When I put it back the task fails. The execution results say "Error: The script files failed to load." I completely uninstalled all SQL Server 2005-related entries using the Programs and Features control panel, rebooted, reinstalled the Workstation Tools, then applied a freshly-downloaded SQL Server 2005 SP2 and rebooted. If I change "RecompileScriptIntoBinaryCode" to false the script fails whether there's a breakpoint or not. If it's true (the default), the script only fails when a breakpoint is set. I would like to be able to set a breakpoint to assist in debugging the package. For the time being, I can move the package to a different (non-Vista) OS, where it works fine, but I would like to be able to develop and debug on Vista.
I have created an Access2003 project (existing data) that links to external data. First I connected to a SQL Server 2000 database. Success. Then I tried to set up a Transact SQL data connection to a legacy MDW-secured Access97 database. (A third-party VB6 application goes against it, and we don't have the source code, so we cannot upgrade it.)
The Transact SQL link tests OK but I cannot select any of the tables or queries from the list presented. However, with the same credentials, I can use these same objects in Excel 2003.
When setting up the link in Access2003, I specify JET 4.0 OLE DB Provider, I enter the MDW file on the All tab, a username and a password on the Connection tab where I browse to the MDB file, and specify Shared Deny None on the Advanced tab. When I test the connection, it tests OK ("Test connection succeeded"). Yet on the "Select the Database and Table/Cube which contains the data you want" dialog, "(Default)" appears in the grayed-out dropdown. Then, beneath that dropdown, there is a grid with Name and Description columns. The grid contains query names but the grid is not enabled. The list of queries is this table is grayed out. Neither of the scrollbars works.
BUT... if I use the SAME username and password in Excel2003, and specify the same MDW, there is no problem working with these same database objects in the legacy Access97 database. WHAT IS DIFFERENT ABOUT THE WIZARD IN EXCEL THAT ALLOWS IT TO SUCCEED AND THE WIZARD IN ACCESS THAT CAUSES IT TO FAIL HERE? In Excel, the list of available providers says Microsoft Access Driver, not JET 4.0 OLE DB Provider.
Thanks
TR
When trying to link to an SQL table in Access 2003, the software appears to be malfunctioning.
The sequence of events is File - Get External Data - Link Tables - Files of Type: ODBC Databases().
The Problem: On two of my computers, the select data source window does not pop up, preventing me from linking to any ODBC data source.
Observations: This function has worked normally in the recent past and works on other computers running Access 2003. One difference between the computers working and non-working computers is Norton Antivirus 2006 (recent upgrade).
Has anyone experienced anything like this? What's going on?
Just try this:
1.Create a AS Connection Manager in a package, put the RetainSameConnection property into True.
2.Drag a Run DDL Task, and use the Connection in step1.
3.write the DDL query as this:
<Command>
<BeginTransaction />
</Command>
4.Run the package.
Result: It said a mistake like this:
Error: the element Command at 7 row, 38 column(Namespace urn:schemas-microsoft-com:xml-analysis) can not be displayed under Envelope/Body/Execute/Command.
Please help me, what's the hell of this?
Thanks.
I had a task, which used to run daily since last month. in which it ran without error every day. suddenly in jobs history its showing error for last 2 days, may i know the reason for that, how can i trouble shoot it?
View 3 Replies View RelatedHi guys,
I don't know why on earth. It only inform this: [WMI Data Reader Task] Error: An error occurred with the following error message: "Invalid query ".
My query is a simple one, very well-know for all of us:
strComputer = "SRVDESASQL2005"
Set wbemServices = GetObject("winmgmts:\" & strComputer)
Set wbemObjectSet = wbemServices.InstancesOf("Win32_LogicalMemoryConfiguration")
For Each wbemObject In wbemObjectSet
WScript.Echo "Total Physical Memory (kb): " & wbemObject.TotalPhysicalMemory
Next
Let me know any comment or thought, I'm just a beginner with WMI.
TIA.
If I try to create open a .dtsx package I get the following error:
TITLE: Microsoft Visual Studio
------------------------------
Failed to create the task.
------------------------------
ADDITIONAL INFORMATION:
Could not load type 'Microsoft.SqlServer.Dts.Design.IDtsPipelineEnvironmentService' from assembly 'Microsoft.SqlServer.Dts.Design, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'. (Microsoft.DataTransformationServices.Design)
------------------------------
BUTTONS:
OK
------------------------------
This also happens if I create a new SSIS project and try to add a data flow.
I have SQL 2005 Service pack 2 loaded and it's running on Windows Server 2003 with the latest service packs.
This was working a few weeks ago and then quit? Any ideas?
I am now getting the following error:
Replication-Distribution: Task 'CAServer_Page_VAServer_InPage' failed. 3700[Microsoft][ODBC SQL Server Driver][SQL Server] Login Failed - User: Reason: Not associated with a trusted SQL Server connection.
I checked under the SQL Security Manager, View, SA Privilege and my sqlexecutivent login is set up as:
CAServersqlexecutivent sa
Thanks in advance for any tips you can give me with this. Both servers are set up in a workgroup. We are not using Domains.
Also, should my table already exist on the Subscribing Server?
------------
When I install the sp2 in a cluster,the database engine upgrade failed.I found the error log for the install at C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixHotFix.log.
Here's the part that mattered:
07/05/2007 15:34:18.319 Patching available passive node: NODEA
07/05/2007 15:34:18.319 Patching passive node: NODEA
07/05/2007 15:34:18.335 Waiting for first completed passive node
07/05/2007 15:34:18.491 Task Scheduler: Created remote folder for product instance target \NODEA
07/05/2007 15:35:00.194 Task Scheduler: Transferred payload to remote product instance target \NODEA
07/05/2007 15:35:00.194 Task Scheduler: Transferred payload to remote product instance target \NODEA
07/05/2007 15:35:00.241 Task Scheduler: Created new scheduled task for product instance target \NODEA
07/05/2007 15:35:00.663 Task Scheduler: Saved new scheduled task for product instance target \NODEA
07/05/2007 15:35:00.663 Task Scheduler: Created scheduled task for product instance target \NODEA
07/05/2007 15:35:00.663 Task Scheduler: Started scheduled task for product instance target \NODEA
07/05/2007 15:35:00.663 Task Scheduler: Started scheduled task for product instance target \NODEA
07/05/2007 15:40:06.817 Task Scheduler: Scheduled task for product instance target has completed
07/05/2007 15:40:06.817 Task Scheduler: Waiting for exit code from scheduled task for product instance target \NODEA
07/05/2007 15:40:11.817 Task Scheduler: Received exit code 29512 from scheduled task for product instance target \NODEA
07/05/2007 15:40:11.817 Task Scheduler: Result code for scheduled task for product instance target has been received
07/05/2007 15:40:11.817 Task Scheduler: Removed scheduled task for product instance target \NODEA
07/05/2007 15:40:12.333 Task Scheduler: Removed remote folder for product instance target \NODEA
07/05/2007 15:40:12.333 Remote process completed for product instance target
07/05/2007 15:40:12.333 Exit code for passive node: NODEA = 29512
07/05/2007 15:40:13.333 The following exception occurred: No passive nodes were successfully patched Date: 07/05/2007 15:40:13.333 File: depotsqlvaultstablesetupmainl1setupsqlsesqlsedllinstance.cpp Line: 3422
07/05/2007 15:40:13.676 Watson: Param1 = Unknown
07/05/2007 15:40:13.676 Watson: Param2 = 0x2b01
07/05/2007 15:40:13.676 Watson: Param3 = Unknown
07/05/2007 15:40:13.676 Watson: Param4 = 0x0
07/05/2007 15:40:13.676 Watson: Param5 = instance.cpp@3422
07/05/2007 15:40:13.676 Watson: Param6 = Unknown
07/05/2007 15:40:13.676 Watson: Param7 = SQL9
07/05/2007 15:40:13.676 Watson: Param8 = Hotfix@
07/05/2007 15:40:13.676 Watson: Param9 = x86
07/05/2007 15:40:13.676 Watson: Param10 = 3042
07/05/2007 15:40:13.676 Installed product: SQL9
07/05/2007 15:40:13.708 Hotfix package completed
07/05/2007 15:40:13.708 Attempting to continue the 32 bit ngen queue
Any advise?Thanks in advance.
Please help me with this error, I am desperate.
SSIS package "Clear.dtsx" starting.Error: 0xC0202009 at Clear, Connection manager "10.11.60.30.msdb.sa": An OLE DB error has occurred. Error code: 0x80040E4D.An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'sa'.".Error: 0xC00220E4 at Execute Package Task: Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!..Task failed: Execute Package TaskWarning: 0x80019002 at Clear: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.SSIS package "Clear.dtsx" finished: Failure.
Hi
I am trying send email using my pop3 account in SSIS. No field found give password. Please help to how to configure my pop3 to send mails in SSIS.
Thanks and Regards
Balasubramani
I have an email script that keeps failing to load when I execute my script task. I have the precompileintobinarycode set to true. Anyone know why it won't load the script? I would use the Send Mail task but it can't find my smtp connection or something.
Thanks,
Mike
Hi,
I am trying to create a linked server between 2 SQL Server 2005 boxes.
When I create the linked server I specify a login for the connection.
The strange part is that I get the following error when it goes to test the connection:
The test connection to the linked server failed
Login failed for user 'Domainuser'. (Microsoft SQL Server, Error: 18456)
I can use the SQL mangement studio to conenct to the database using this same login.
The login has all the server roles assigned to it also.
Can anyone shed some light as to what may be the problem?
Thanks,
Hi,
I have one data driven task set up in my DTS package. for some reason the connection to data source is not available when my package is scheduled to run,which fails the package.
is there a way, I can set the task to try to execute again after a couple of minutes or 5 mins, maybe a predefined number of times before it fails the package?
Thanks & Regards
Naseem
I have a package with an XML Task with OperationType = Validate. The source is a string variable and the second operand is a file connection to a schema file. The schema file <include>'s other schemas. I run the package in debug mode in Visual Studio with no errors. I exit Visual Studio. Then I open Visual Studio again and run the package in debug mode like before and it fails in the xml task with error: "Task failed to validate "No schema to use in validation was found.". I don't understand why it fails since no changes were made. The strange thing is that if I click the File Connection Manager for the schema file and click Browse and then reselect the same schema file again then it runs OK. Note that I have to exit Visual Studio and not just close the package in order to repro the error. It seems like exiting Visual Studio frees some resource that is essential to the validation. Reselecting the schema file in the Connection Manager seems to restore the resource. (SP1)
View 2 Replies View RelatedI'm debugging a SSIS package in Visual Studio and I have a task that failes but the overall package is reporting success. The deployed package in SQL2005 is doing the same thing.
Task failed: FactVisitApplicationInventory
SSIS package "PACE to PACE DW PROD.dtsx" finished: Success.
The program '[4652] PACE to PACE DW PROD.dtsx: DTS' has exited with code 0 (0x0).
I have set FailPackageOnFailure=True, FailParentOnFailure=True, and MaximumErrorCount=0 on this task and am executing just this single task in Studio and I can't get the Package to report a failure.
Any ideas?
Hi,
I have a package that contains an Execute Package Task... it works fine when on my local machine and on our test-server.
After deploying the SSIS solution to our customers server, I open the project in Visual Studio and run the mainPackage in debug mode and the Task fails when trying to execute the package.. if I remove everything in the childpackage it still fails... the path to the package is correct and I know that I have rigths to execut it. I do not use any package security/encryption..
If i create a new package in the project and create a new fileconnection to it the Execute Package Task executes correctly, with the exact same content as the original package...
So my guess is that something in the FileConnetion object is set wrong, but i cannot understand what it is. The errormessage i get is something like this. "Execute Package Failed. Could not execute package".
Anyone had the same problem as I? I´m grateful for any help!
/erik
SSIS Experts,
I am executing a child package programmatically and want few lines of code to detect cause of the failure on the fly. One way will be to run the child package through dtexec command uility. But on the fly i will be assigning few values in Parent package variable to the child variables and finally run the child package. Since we cannot apply expressions or use precendence constraints in place, It seems that we are left with only choice to programmatically detect errors in tasks. In DTS, it was achieved this way:
Code Snippet
For Each ostep In oPkg
If ostep.ExecutionResult = DTSStepExecResult_Failure Then
ProcessSubDTSPackage = DTSTaskExecResult_Failure
End If
Next
Thanks
Subhash Subramanyam
Hi,
I am trying to transfer the data from flat file to sql server.When I am running the package on local server(network server) it works fine.But when I use it to transfer the data to online server it starts and shows 2771 rows transfered and remains on that only, dosent stop or give a error. When i stop the execution I get the following errors:
[DTS.Pipeline] Error: The pipeline received a request to cancel and is shutting down.
[Loose Diamond File [1]] Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "Loose Diamond File" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
Can any one help me to find what the problem is.
Thanks in advance.
I have an SSIS package which calls two other SSIS packages as part of it's control flow (using the Execute Package task). Both packages are stored in the same parent folder on the same server. The first child package runs successfully, the second does not. It ran fine for days until yesterday. Not sure what I might have done. I have tried to delay validation and recreate the connection. No go. Has anyone else run into this. I am running SQL 2005 RTM and VS 2005 RTM on XP Pro SP2. Any suggestions would be welcome.
View 9 Replies View RelatedAfter setting up the linked server connection at the standby server, Itried to xcopy a file through the sql server 2000 schedule task to thestandby server's shared directory. But it keeps giving me the errormessage with'Invalid Drive Specification'.My whole process includes1) set up linked server connection on the standby server2) set up job to xcopy file as operating system commend in sql serverfrom the production box(xcopy c:directoryfile.bak\standby_servere$directory /c)3) test, but not successful - I am already running the whole scheduletask as a Windows user with Admin authority.)What did I do wrong or did I miss something?Thanks in advance
View 6 Replies View RelatedI have created one Custom Task in SSIS. Basically I have one solution and 2 class library project one for Task and one for UserInterface
when i try to drag new task from tool box it says following errror
===================================
Failed to create the task. (Microsoft Visual Studio)
===================================
The task editor of the type 'CustomErrorControl.CustomControlnew,CustomErrorControl,Version=1.0.0.0,Culture=Neutral,PublicKeyToken= 0c2b681d5171851e' is not installed correctly. (Microsoft.DataTransformationServices.Design)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=TaskEditorNotProperlyInstalled&LinkId=20476
------------------------------
Program Location:
at Microsoft.DataTransformationServices.Design.DtrTaskDesigner.InitializeTaskUI()
at Microsoft.DataTransformationServices.Design.DtrTaskDesigner.OnNewTaskAdded()
at Microsoft.DataTransformationServices.Design.DtsBasePackageDesigner.CreateExecutable(String moniker, IDTSSequence container, String name)
CustomErrorControl is my name space and CustomControlNew is my class name.
does it TypeName should appear like what i have?
I have unstalled it and try to reinstall it. change the stong name key and they try again but somehow same error..
Please help..
In our package we have a script task that renames the files in the server (Windows 2003) where the package is deployed.
When we execute the project from the development environment(IDE), then it works fine and doesn't give any error.
However, when we deploy the package after configuring the Configuration file properly, then it throws up a "Script Task Failed" error and the the package execution fails.
We checked all the variable values from the development environment in the current package. The child variables take the variable values from the parent package and the configuration file.
It works fine, which implies that there is no problem with the script (This same script was working perfectly earlier - We have made NO changes to the script task.)
Another issue is that we are not able to debug the script task even if we put breakpoints in the script. The control flow simply doesn't stop at the breakpoints.
I have a package that runs fine by itself. But when I run it inside a Foreach Loop container on a parent package, I got a buffer error after a few loops. Here are a couple of the error lines:
A buffer failed while allocating 49085616 bytes.
The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.
I already played around with the Data Flow task€™s DefaultBufferMaxRows and DefaultBufferSize properties, and I am still getting the error. Just wondering if there is a memory leak or something with the Foreach Loop task. I haven€™t install SP1. Maybe SP1 fixes this issue?
Hi all,
I'm working with Execute SQL task. Connection type: OLE DB. With the following settings, the task works fine:
Parameter mapping:
Code Snippet
Variable Name Direction Data type Parameter Name
User::InputFile Input NVARCHAR 0
User::DesiredOutput Input NVARCHAR 1
SQLStatement:
Code Snippet
exec [spu_CreateOutput] ?, ?
However, I want to put in some conditions so I modified the task as:
Parameter mapping:
Code Snippet
Variable Name Direction Data type Parameter Name
User::OutputFile Input NVARCHAR 0
User::InputFile Input NVARCHAR 1
User::DesiredOutput Input NVARCHAR 2
SQLStatement:
Code Snippet
if(? <> 'NotUsed')
Begin
exec [spu_CreateOutput] ?, ?
End
But the modification doesn't work. The following message was thrown:
Error: 0xC002F210 at CREATE OUTPUT, Execute SQL Task: Executing the query "if(? <> 'NotUsed')
Begin
exec [spu_CreateOutput] ?, ?
End
" failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: CREATE OUTPUT
Can anyone tell me what I have been wrong with it? It seems that parameter mapping can only apply for a single select statement/function/procedure call :-?
Thank you,
GiaHi
Hi all,
I am trying to setup the cluster SQL server, say ServerA and ServerB. While I start the setup in ServerA, it prompts,
'Setup failed to start on the remote machine. Check the Task scheduler event
log on the remote machine.'
But I found that there is no remote logon to both nodes and the service task scheduler is running in both node.
On the other hand, I try to install the SQL via ServerB, it prompts for valid Native client package 'sqlncli.msi' and caused the setup failed finally. However, the Native client was setup successfully as a prerequisite once starting the setup.
Any advise? Thanks in advance!!
This task or container has failed, but because FailPackageOnFailure property is FALSE, the package will continue. This warning is posted when the SaveCheckpoints property of the package is set to TRUE and the task or container fails.
I have just spotted the message above in one of my log files.
I've never noticed it before. Is it new in SP1? I'm guessing it must be.
If so - good job. This is a very important addition because the behaviour of checkpoints without setting FailPackageOnFailure=TRUE is not intuitive (in my opinion).
-Jamie
So in a script task for one of my packages I have a connection manager to an dtsConfig OLE DB.
This is the code
Dim ConnectionString As String = Dts.Connections("db_stage").ConnectionString
Dim sqlConnection As SqlConnection = New SqlConnection(ConnectionString )
I get a login failed for
user...But if I hardcode the connectionString, including the password this works.
1) Why is it that the ConnectionString from the connection manager omits this password?
2) Since this is an OLE DB, is there anyway to set the Data Source Designer to omit the "Provider=ABCDED.1" section?
Thanks!
Tony
I have inherited a server on which is a maintenance plan with two subplans on different schedules. In each subplan there are Execute T-SQL tasks with scripts for index rebuilds. Each task is set up with a Completion arrow to the next task and a Failure arrow to a Notify Operator Task. I was asked to add a task for index rebuilds to a specific subplan for a specific database, which is what the other tasks also do. I discovered that my task was failing but the others were fine. No notification was sent about my task failing even though the job is marked in MSDB as a failed job. I have sent a test email using the "Send Test Email..." option when right clicking Database Mail in SSMSand I receive an email so I know Database Mail works.
I set up a test job to model the index job that I can't get notifications from. I have two T-SQL tasks that just select the top row from a small table. The first task has a syntax error that I did so it would fail. I have a failure arrow to a Notify Operator Task and a Completion arrow to another T-SQL task with no syntax error which has a Success arrow to a Notify Operator task. As expected, when I execute this job I receive one failure email and one success email.
The only other troubleshooting step I know to try is to add a Notify Operator task before my failing task. That Notify Operator task will hopefully fire to tell me that the previous step was successful. I am not having problems with the other steps so I was just thinking I would try to get the subplan to send me a success email about one of the steps that has been working fine.