If Statement In Dataset
Apr 27, 2007
hi,
Can I use if statement in Dataset?
I have to achive following functionality,
Select
*
From
Table
Where
Column1=value
AND
Iif(Param==0,
Colm2='value1' ,
colm2= 'value1' AND Colm3='value2')
Is this possible? or are there any alternatives?
thanks,
Anand
View 1 Replies
ADVERTISEMENT
Sep 3, 2015
Using this IIF statement:
=CountDistinct(IIF(Fields!Released_DT.Value = Fields!Date2.Value, Fields!Name.Value,
Nothing))
Released_DT = a date - 09/03/2015 or 09/02/2015
Date2 = returns another date value in this case 09/03/2015
What I'm trying to do is: count distinct number of people (Fields!Name.Value) if the Relased_DT = Date2.My IIF statement is returning a zero value.
View 4 Replies
View Related
Mar 14, 2007
I'm using the designer to create/modify strongly typed datasets. I have one select statement that I'm having considerable trouble with. The user selects search parameters from a form. These search parameters are used to filter the data sent to a gridview control. Three of these parameters are almost enough to make me abandon the dataset in this case.The first two are minimum and maximum age. I have a birth date field, but not an age field - ages have a habit of changing without user intervention <grin> and can be calculated. In ASP I'd do something like this:strSQL = "SELECT [DATE OF BIRTH], [FIRST NAME], [LAST NAME], [STATE], [MALE OR FEMALE] FROM members WHERE (DateDiff(yyyy, [DATE OF BIRTH], '" & date & "') >= " & strLowerAge & ") AND (DateDiff(yyyy, [DATE OF BIRTH], '" & date & "') <= " & strUpperAge & ")" I can't figure out how to get datediff working in the designer much less testing against upper and lower age limits.The third parameter is astrological sign. Again, I calculate it based on the birth date. I don't have a field for it. I could, but I would have to modify all the pages that add or edit records to the database to insure all the records that have birth dates also have the right sign. I'm leaning in that direction, but is it possible to accept a sign as a parameter and calculate, based on the birth date, which records qualify? I need to get the age issue fixed. The sign is a nice to have, since I can do it another way if I have to. BTW: I did decide to abandon the dataset in favor of a SqlDataSource control. This allowed me to build my select string in the code behind the way I would have in ASP. This resulted in paging and sorting not working properly. Sorting would be nice, paging is necessary. I'm pretty sure going back to the dataset or using a stored procedure would fix the paging problem, and I've yet to work with stored procedures (it's on my list of things to learn). Any comments or feedback on this would be avidly read and appreciated.Diane
View 8 Replies
View Related
Dec 17, 2007
Hello,
I have been reading about how you shouldn't build dynamic SQL statements (see TextBox1.Text in line 3) and should use parameters instead, but I haven't yet found how to create a SELECT statement with a parameter that fills a dataset. If anyone can show me the correct way of doing this I would appreciate it so I can add it to my code snippets for proper coding practices. Thanks in advance for any assistance.
string strConnectionString = ConfigurationManager.ConnectionStrings["sqlConnectionString"].ConnectionString;
SqlConnection myConnection = new SqlConnection(strConnectionString);
-> string sqlSelect = "select * from customers where city = " + "'" + TextBox1.Text + "'";
SqlDataAdapter da = new SqlDataAdapter(sqlSelect, myConnection);
DataSet ds = new DataSet();
myConnection.Open();
da.Fill(ds, "myDataset");
myConnection.Close();
jcfrasco
View 1 Replies
View Related
May 26, 2015
I have a report with multiple datasets, the first of which pulls in data based on user entered parameters (sales date range and property use codes). Dataset1 pulls property id's and other sales data from a table (2014_COST) based on the user's parameters. I have set up another table (AUDITS) that I would like to use in dataset6. This table has 3 columns (Property ID's, Sales Price and Sales Date). I would like for dataset6 to pull the Property ID's that are NOT contained in the results from dataset1. In other words, I'd like the results of dataset6 to show me the property id's that are contained in the AUDITS table but which are not being pulled into dataset1. Both tables are in the same database.
View 0 Replies
View Related
Oct 1, 2015
I have a small number of rows in a dataset, Table 1. There is a CLOB on a large dataset, Table 2. They join on a PK. I would like to retrieve this CLOB and add it to the data flow for Table1. In short I want to emulate the following:
Table 1: Small table without CLOB, 10 rows.
Table 2: Large table with CLOB, 10,000,000 rows
select CLOB
from table2
where pk = (select pk from table1)
I want this to return the CLOBs for the small number of rows in Table 1. The PK is indexed obviously so it should be a fast look up.
Table 1 and Table 2 live on different Oracle databases. How do I perform this operation efficiently in SSIS? It seems the Lookup and Merge Join wont do this.
View 2 Replies
View Related
May 27, 2015
I have a report with multiple datasets, the first of which pulls in data based on user entered parameters (sales date range and property use codes). Dataset1 pulls property id's and other sales data from a table (2014_COST) based on the user's parameters.
I have set up another table (AUDITS) that I would like to use in dataset6. This table has 3 columns (Property ID's, Sales Price and Sales Date). I would like for dataset6 to pull the Property ID's that are NOT contained in the results from dataset1. In other words, I'd like the results of dataset6 to show me the property id's that are contained in the AUDITS table but which are not being pulled into dataset1. Both tables are in the same database.
View 3 Replies
View Related
May 21, 2007
I found out the data I need for my SQL Report is already defined in a dynamic dataset on another web service. Is there a way to use web services to call another web service to get the dataset I need to generate a report? Examples would help if you have any, thanks for looking
View 2 Replies
View Related
Oct 12, 2007
Is there any way to display this information in the report?
Thanks
View 3 Replies
View Related
May 7, 2008
Hi,
I have a stored procedure attached below. It returns 2 rows in the SQL Management studio when I execute MyStorProc 0,28. But in my program which uses ADOHelper, it returns a dataset with tables.count=0.
if I comment out the line --If @Status = 0 then it returns the rows. Obviously it does not stop in
if @Status=0 even if I pass @status=0. What am I doing wrong?
Any help is appreciated.
ALTER PROCEDURE [dbo].[MyStorProc]
(
@Status smallint,
@RowCount int = NULL,
@FacilityId numeric(10,0) = NULL,
@QueueID numeric (10,0)= NULL,
@VendorId numeric(10, 0) = NULL
)
AS
SET NOCOUNT ON
SET CONCAT_NULL_YIELDS_NULL OFF
If @Status = 0
BEGIN
SELECT ......
END
If @Status = 1
BEGIN
SELECT......
END
View 4 Replies
View Related
Apr 11, 2008
i have two datasets.one dataset have old data from some other database.second dataset have original data from sql server 2005 database.both database have same field having id as a primary key.i want to transfer all the data from first dataset to new dataset retaining the previous data but if old dataset have the same id(primary key) as in the new one then that row will not transfer.
but if the id(primary key) have changed values then the fields updated with that data.how can i do that.
View 4 Replies
View Related
Dec 19, 2006
Hi,
I have two datasets in my report, D1 and D2.
D1 is a list of classes with classid and title
D2 is a list of data. each row in D2 has a classid. D2 may or may not have all the classids in D1. all classids in D2 must be in D1.
I want to show fields in D2 and group the data with classids in D1 and show every group as a seperate table. If no data in D2 is available for a classid, It shows a empty table.
Is there any way to do this in RS2005?
View 2 Replies
View Related
Apr 5, 2007
Hi every body...
I have a probleme
I have a web Services which contains a method getValue(IDEq (int), idIndicator(int), startTime(dateTime), endTime(dateTime))
I need to call this method. But my problem is how pass parameter ?
I see the tab Param but it isn't work as I wait,... maybe I do a mistake...
I want that statTime and endTime are select by the user via a calendar for example...
now idIndicator and idEq was result of an other dataSet from a xml datasource...
But I don't how integrate dynamically... I try to enter a parameter via the param tab, and create and expression :
=First(Fields!idEq.Value, "EquipmentDataSet")
but when i execute the query, the promter display <NULL>...
So I don't know how to do and if it is possible !
I hope someone can help me !
Thank you !
View 3 Replies
View Related
Dec 3, 2007
Hi experts,
I'm not sure my design is normal or not. Please give me some advice.
I've a dataset and query by a field name 'companyid'.
select * from companyid where companyid = @icompany which @icompany is a input field.
if user select all, i'll send 0 to @icompany then I need to select all records.
question 1. How can I get all records? (i think about this query select * from companyid <> 0)
if user select for example companyid = 1, i'll send 1 to @icompany and the query work fine.
question 2. How can I change the query to adopt this 2 condition?
Thanks a lot,
Jeff
View 8 Replies
View Related
Aug 29, 2006
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies
View Related
Jan 9, 2015
Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
View 4 Replies
View Related
Jul 20, 2005
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
View 2 Replies
View Related
Oct 29, 2007
Hi guys,
I have the query below (running okay):
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:
Field02
----------------------
22810
8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760
22810
Is there any good suggestion?
Thanks in advance for any help,
Aldo.
View 3 Replies
View Related
Nov 5, 2015
I've have a need with SQL Server 2005 (so I've no MERGE statement), I have to merge 2 tables, the target table has 10 fields, the first 4 are the clustered index and primary key, the source table has the same fields and index.Since I can't use the MERGE statement (I'm in SQL 2005) I have to make a double step operation, and INSERT and an UPDATE, I can't figure how to design the WHERE condition for the insert statement.
View 2 Replies
View Related
Aug 13, 2014
i was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause
the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]
i was thinking of doing
Update [tablename]
SET [No] =
CASE
WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa'
ELSE 'Null'
END
What is the best way to script this
View 1 Replies
View Related
Jul 4, 2006
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
View 7 Replies
View Related
May 5, 2015
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
View 7 Replies
View Related
Feb 4, 2006
I am using ASP.NET 2.0, and am attempting to write some code to connect to the database and query a data table. The compiler is not recognizing my SqlConnection statement. It does recognize other commands. And just to make sure, I created other sql objects such as ObjectDataSource and SqlDataSource. The compiler does not find a problem with that code.
Basically the compiler is telling me that I am missing a "using" directive. The compiler is wrong though, because I am including the statement "usingSystemData" Can someone please take a look at my code below and to see if you notice what the problem might be? Note that I numbered the lines of code below. Note that I also tried putting lines 3 trhough 6 before line 2(The page directive) but that did not fix the problem The compiler still gives me the same compiler message.
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request.Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0246: The type or namespace name 'SqlConnection' could not be found (are you missing a using directive or an assembly reference?)Source Error:
Line 21: SqlConnection sqlConn = new SqlConnection("server=localhost;uid=sa;pwd=password;database=master;");
1 <asp:sqldatasource runat="server"></asp:sqldatasource>
2 <%@ Page Language="C#"%>
3 using System;
4 using System.Data;
5 using System.Collections;
6 using System.Data.SqlClient;
7
8 <script runat=server>
9
10 protected void Page_Load(object o, EventArgs e)
11 {
12 ObjectDataSource dsa; // This works no problems from the compiler here
13 SqlDataSource ds; // This works no problems from the compiler
14
15 if (IsPostBack)
16 {
17 if (AuthenticateUser(txtUsername.Text,txtPassword.Text))
18 {
19 instructions.Text = "Congratulations, your authenticated!";
20 instructions.ForeColor = System.Drawing.Color.Red;
21 SqlConnection sqlConn = new SqlConnection("server=localhost;uid=sa;pwd=password;database=master;");
22 String sqlStmt = "Select UserName from LogIn where UserName='" + txtUsername.Text + "' and password='" + sHashedPassword + "'";
23 }
24 else
25 {
26 instructions.Text = "Please try again!";
27 instructions.ForeColor = System.Drawing.Color.Red;
28 }
29 }
30
31 }
32
33 bool AuthenticateUser(string username, string password)
34 {
35 // Authentication code goes here
36
37 }
View 1 Replies
View Related
May 26, 2006
Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);
The error I'm getting is:
Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
View 10 Replies
View Related
Oct 20, 2014
In the below code i want to use select statement for getting customer
address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname
from customer table.Rest of the things will be as it is in the following code.How do i do this?
INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,
[code]....
View 1 Replies
View Related
Feb 20, 2008
i want to display records as per if else condition in ms sql query,for this i have used tables ,queries as follows
as per data in MS Sql
my tables are as follows
1)material
fields are -- material_id,project_type,project_id,qty, --
2)AB_Corporate_project
fields are-- ab_crp_id,custname,contract_no,field_no
3)Other_project
fields are -- other_proj_id,other_custname,po
for ex :
vales in table's are
AB_Corporate_project
=====================
ab_crp_id custname contract_no field_no
1 abc 234 66
2 xyz 33 20
Other_project
============
other_proj_id other_custname po
1 xxcx 111
2 dsd 222
material
=========
material_id project_type project_id qty
1 AB Corporate 1 3
2 Other Project 2 7
i have taken AB Corporate for AB_Corporate_project ,Other Project for Other_project
sample query i write :--
select m.material_id ,m.project_type,m.project_id,m.qty,ab.ab_crp_id,
ab.custname ,op.other_proj_id,op.other_custname,op. po
case if m.project_type = 'AB Corporate' then
select * from AB_Corporate_project where ab.ab_crp_id = m.project_id
else if m.project_type = 'Other Project' then
select * from Other_project where op.other_proj_id=m.project_id
end
from material m,AB_Corporate_project ab,Other_project op
but this query not work,also it gives errors
i want sql query to show data as follows
material_id project_type project_id custname other_custname qty
1 AB Corporate 1 abc -- 3
2 Other Project 2 -- dsd 7
so plz help me how can i write sql query for to show the output
plz send a sql query
View 8 Replies
View Related
Aug 10, 2006
I have 3 tables, with this relation:
tblChats.WebsiteID = tblWebsite.ID
tblWebsite.AccountID = tblAccount.ID
I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement:
SELECT * FROM tblChats c
LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID
LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID
WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180
View 1 Replies
View Related
Feb 22, 2007
I am faced with a common situation but there is a little twist that makes it unique and has me stumped. Hopefully someone can point me to a solution or give me enough guidance to figure it out.
Here is the situation, I am loading an XML file into a Dataset and need to update SQL tables from that Dataset but the tables are slightly different than in the DataSet. I am using C#, asp.net 2.0, visual studio 2005 and sql server 2005.
When I loaded the XML into the Dataset, the Dataset contained 19 tables. I individually loaded each table from the Dataset and determined from that which tables I needed and didn't need as well as determinined which fields I needed or not. I used this information to create my SQL tables.
Briefly, when creating the SQL tables, I used the dataset table name as the SQL table name and used the same column names as well. the only difference from the Dataset tables and SQL tables is 1 column has a different name (or to be more specific, a column exists in the datset that does not exist in the sql table and a column exists in the SQL table that does not exist in the dataset table). Also, some tables in the dataset do not exist in the sql Database.
I know that I can spin through each row of the tables I need in the Dataset and create an insert command from the row data and insert that into the SQL table but I have 11 tables to do that with. I would like to take advantage of ADO.NET and push the datset information into sql data but I am confused on how to do this.
I am confused because not all tables in the dataset are represented in the sql database and though the tablenames and most of the columns have the same name, it is not an exact fit.
Can anyone point me to a solution or give me a good game plan that I can search on to help me load my dataset info to a sql DB.
I appreciate any help I can get.
Thanks.
View 1 Replies
View Related
Aug 24, 2007
hi developers
i've a table named users where i store the city id ,
this city id -> citymaster (cityid,stateid)->state master (cityid,stateid) ->country master (countryid,stateid).
now i need to make the query fetches the columns like this
username,cityid,stateid,countryid
how can i do this
View 2 Replies
View Related
Jun 5, 2008
I using a stored procedure to update profile...
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author:
-- Create date:
-- Description:
-- =============================================
ALTER PROCEDURE [dbo].[SP_UpdateProfile]
-- Add the parameters for the stored procedure here
@regUserID nvarchar(20),
@regName nvarchar(50),
@regEmail nvarchar(50),
@regMobile nvarchar(10),
@regPinCode nvarchar(10),
@regCity nvarchar(12),
@regState nvarchar(12),
@RValue int output
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
UPDATE tblUserDetails
SET
regName= @regName,
regEmail= @regEmail,
regMobile= @regMobile,
regPinCode= @regPinCode,
regCity= @regCity,
regState= @regState
WHERE regUserID=@regUserID
END
here i updating the profile according to the userID..
My doubt is how to get these various values selected in a dataset and how to retrieve from tat dataset... please friends help me out...
View 2 Replies
View Related
Jun 8, 2008
I am using storedprocedure for a process... i am selecting 4 variables from the stored procedure as a ouput parameters.. now please help me in working with a dataset to collect the 4 variables and read the variables from the dataset...
View 5 Replies
View Related
Jan 17, 2005
Hey,
I am using the following stored procedure, but as it is now it returns 2 datasets. I need it to return only 1.
ALTER PROCEDURE dbo.Test2
(
@Location varchar(250),
@FromDate datetime,
@ToDate datetime
)
AS
SET NOCOUNT ON
CREATE TABLE #Temp1 (themonth varchar(12), theyear varchar(12), averagedaystofilltotal float, averagefillratetotal float,
delaytimetotal float, responsetimelagtotal float)
INSERT INTO #Temp1(themonth, theyear, averagedaystofilltotal, averagefillratetotal, delaytimetotal, responsetimelagtotal)
EXEC rptStatsGraphicalYEARoverYear @Location, @FromDate, @ToDate
Create table #Temp2(averagedaystofilltarget float, averagefillratetarget float, responsetimelagtarget float)
INSERT INTO #Temp2(averagedaystofilltarget, averagefillratetarget, responsetimelagtarget)
EXEC Test1
SELECT * FROM #Temp1
Select * from #Temp2
drop table #Temp1
drop table #Temp2
Would anyone have any suggestions on how to modify this procedure so that it returns only one dataset, but yet still keeps the data seperated? Or is this even possible?
Thanks
View 3 Replies
View Related
Jul 9, 2006
ok, i have a question.
im developing an application, and want to know some pro's and con's with using a dataset or using direct connection to database...
also a breif description of what a dataset is would be very handy...
Thanks, Justin
View 4 Replies
View Related
