hi, i've got this code
Code Snippet
go
create proc dbo.sp_GetFilterOrgIDs(@ID int)
as
select distinct
O.ID
from
Organisations O
if (@ID != 0)
begin
where O.ID = @ID
end
and am getting
Incorrect syntax near the keyword 'where'.
any idea why??
SELECT DISTINCT CONVERT (nvarchar , tblSubject.Subject, 108) AS SubjectTime, CONVERT (nvarchar(11), tblSubject.Subject, 100) AS Date FROM tblLooker,tblSubject,tblStop WHERE NOT (SELECT DISTINCT CONVERT (nvarchar , tblSubject.Subject, 108) AS SubjectTime, CONVERT (nvarchar(11), tblSubject.Subject, 100) AS Date FROM tblSubject, tblLooker, tblStop WHERE tblSubject.Subject > tblLooker.Looker AND tblSubject.Subject < tblStop.Stop AND tblLooker.id = tblStop.id) Msg 170, Level 15, State 1, Line 5Line 5: Incorrect syntax near ')'. Can anyone tell me why this is not working? Thanks
View 1 Replies View RelatedI am trying to figure out the syntax for the following:
=iif(fields!ExtTripCount.value = 1,sum(Fields!ExtTripCount.value),0) / (count(fields!SvcCallNumber.value))* 100
I am trying to take all the trips that equal a one and divide them by the total number of service calls and then multiple them by 100 to get the percentage.
I am receiving the following errror: "The value expression refers to the field 'SvcCallNumber'. Report item expressions can only refer to fields within the current dta set scope or, if inside an aggregate, the specified data set scope...
Ok, the following four lines are four lines of code that I'm running, I'll post the code and then explain my issue:
sqlCommand = New SQLCommand("INSERT INTO Bulk (Bulk_Run, Bulk_Totes, Bulk_Drums, Bulk_Boxes, Bulk_Bags, Bulk_Bins, Bulk_Crates) VALUES (" & RunList(x,0) & ", " & Totes & ", " & Drums & ", " & Boxes & ", " & Bags & ", " & Bins & ", " & Crates & ")", Connection) sqlCommand.ExecuteNonQuery() sqlCommand = New SQLCommand("INSERT INTO Presort (Presort_Run, Presort_Totes, Presort_Drums, Presort_Boxes, Presort_Bags, Presort_Bins, Presort_Crates) VALUES (" & RunList(x,0) & ", " & Totes & ", " & Drums & ", " & Boxes & ", " & Bags & ", " & Bins & ", " & Crates & ")", Connection) sqlCommand.ExecuteNonQuery()
The two tables (Bulk & Presort) are <b>exactly</b> the same. This includes columns, primary keys, IDs, and even permissions. If I run the last two liens (the INSERT INTO Presort) then it works fine without error. But whenever I run the first two lines (the INSERT INTO Bulk) I get the following error:
Incorrect syntax near the keyword 'Bulk'.
Anyone have any ideas, thanks
Hi forum, im converting some code and have an issue with th following code!!! many thanks for good advice, Paul
Line 55: SQLa = "UPDATE counted SET " & y & " = " & intClick & ", total = " & intTotal & " WHERE ID = " & RSpc.Fields("pc").ValueLine 56: Conn.Execute(SQLa)
System.Runtime.InteropServices.COMException: Syntax error in UPDATE statement.
Dim SQLa As String
I have place a lblmessage.text = ex.Message to trace what happen and it show me a syntax error in update happen. I don't know whats wrong with my syntax. Can someone help me on this?
<%@ Page Language = "vb" Debug="true" %>
<%@ import namespace= "system.data" %>
<%@ import namespace= "system.data.oledb" %>
<script runat="server">
'set up connection
dim conn as new oledbconnection _
("provider = microsoft.jet.oledb.4.0;" & _
"data source = c:aspnetdataanking.mdb")
sub page_load(sender as object, e as eventargs)
if not page.ispostback then
filldatagrid()
end if
end sub
sub submit (sender as object, e as eventargs)
'insert new data
dim i,j as integer
dim params(7) as string
dim strtext as string
dim blngo as boolean = true
j = 0
for i = 0 to addpanel.controls.count -1
if addpanel.controls(i).gettype is _
gettype (textbox) then
strtext = ctype(addpanel.controls(i), _
textbox).text
if strtext <> "" then
params(j) = strtext
else
blngo = false
lblmessage.text = lblmessage.text & _
"you forgot to enter a value for " & _
addpanel.controls (i).id & "<p>"
lblmessage.style ("forecolor")= "red"
end if
j=j+1
end if
next
if not blngo then
exit sub
end if
dim strsql as string = "INSERT INTO tblusers " & _
"(firstname, lastname, address, city, state, " & _
"zip, phone) values (" & _
"'" & params(0) & "'," & _
"'" & params(1) & "'," & _
"'" & params(2) & "'," & _
"'" & params(3) & "'," & _
"'" & params(4) & "'," & _
"'" & params(5) & "'," & _
"'" & params(6) & "')"
executestatement(strsql)
filldatagrid()
end sub
sub dgdata_edit (sender as object, e as datagridcommandeventargs)
filldatagrid(e.item.itemindex)
end sub
sub dgdata_delete (sender as object, e as datagridcommandeventargs)
dim strsql as string = "DELETE FROM tblusers " & _
"WHERE userid = " & e.item.itemindex + 1
executestatement(strsql)
filldatagrid()
end sub
sub dgdata_update (sender as object, e as datagridcommandeventargs)
if updatedatastore(e) then
filldatagrid(-1)
end if
end sub
sub dgdata_cancel (sender as object, e as datagridcommandeventargs)
filldatagrid(-1)
end sub
sub dgdata_pageindexchanged (sender as object, e as datagridpagechangedeventargs)
dgdata.databind()
end sub
function updatedatastore (e as datagridcommandeventargs) as boolean
dim i,j as integer
dim params(7) as string
dim strtext as string
dim blngo as boolean = true
j = 0
for i =1 to e.item.cells.count - 3
strtext = ctype(e.item.cells(i).controls(0), _
textbox).text
if strtext <> "" then
params(j) = strtext
blngo = true
j= j+1
else
blngo = false
lblmessage.text = lblmessage.text & _
"you forgot to enter a value<p>"
end if
next
if not blngo then
return false
exit function
end if
dim strsql as string = "update tblusers SET " & _
"Firstname.value = '" & params(0) & "'," & _
"lastname.value = '" & params(1) & "'," & _
"address.value = '" & params(2) & "'," & _
"city.value = '" & params(3) & "'," & _
"state.value = '" & params(4) & "'," & _
"zip.value = '" & params(5) & "'," & _
"phone.value = '" & params(6) & "'," & _
" WHERE Userid = " & ctype(e.item.cells(0). _
controls(1), label).text
executestatement (strsql)
return blngo
end function
sub filldatagrid (optional editindex as integer = -1)
' open connection
dim objcmd as new oledbcommand _
("select * from tblusers", conn)
dim objreader as oledbdatareader
try
objcmd.connection.open ()
objreader = objcmd.executereader()
catch ex as exception
lblmessage.text = "error retrieving from the " & _
"database."
end try
dgdata.datasource = objreader
if not editindex.equals(nothing) then
dgdata.edititemindex = editindex
end if
dgdata.databind()
objreader.close
objcmd.connection.close()
end sub
function executestatement (strsql)
dim objcmd as new oledbcommand(strsql, conn)
try
objcmd.connection.open()
objcmd.executenonquery()
catch ex as exception
lblmessage.text = ex.message
end try
objcmd.connection.close()
end function
</script>
<html><body>
<asp:label id= "lblmessage" runat ="server" />
<form runat= "server">
<asp:datagrid id = "dgdata" runat ="server"
bordercolor = "black"
gridlines="vertical"
cellpadding ="4"
cellspacing="0"
width = "100%"
autogeneratecolumns = "False"
ondeletecommand = "dgdata_delete"
oneditcommand = "dgdata_edit"
oncancelcommand = "dgdata_cancel"
onupdatecommand = "dgdata_update"
onpageindexchanged= "dgdata_pageindexchanged"
font-names = "arial"
font-size="8pt"
showfooter = "true"
headerstyle-backcolor= "#cccc99"
footerstyle-backcolor= "#cccc99"
itemstyle-backcolor= "#ffffff"
alternatingitemstyle-backcolor="#cccccc">
<columns>
<asp:templatecolumn headertext="id">
<itemtemplate>
<asp:label id = "name" runat = "server"
text = '<%# container.dataitem("userid")%>' />
</itemtemplate>
</asp:templatecolumn>
<asp:boundcolumn headertext = "firstname"
datafield = "firstname" />
<asp:boundcolumn headertext = "lastname"
datafield = "lastname" />
<asp:boundcolumn headertext = "address"
datafield = "address" />
<asp:boundcolumn headertext = "city"
datafield = "city" />
<asp:boundcolumn headertext = "state"
datafield = "state" />
<asp:boundcolumn headertext ="zip"
datafield = "zip" />
<asp:boundcolumn headertext ="phone"
datafield = "phone" />
<asp:editcommandcolumn
edittext="Edit"
canceltext="cancel"
updatetext="update"
headertext = "edit"/>
<asp:buttoncolumn headertext = "delete?" text = "X"
commandname = "delete"
buttontype = "pushbutton" />
</columns>
</asp:datagrid><p>
<asp:panel id= "addpanel" runat = "server">
<table>
<tr>
<td width ="100" valign = "top">
first and last name:
</td>
<td width ="300" valign = "top">
<asp:textbox id= "tbfname" runat = "server"/>
<asp:textbox id= "tblname" runat = "server"/>
</td>
</tr>
<tr>
<td valign = "top">address:</td>
<td valign= "top">
<asp:textbox id= "tbaddress" runat = "server"/>
</td>
</tr>
<tr>
<td valign = "top">city, state, zip:</td>
<td valign= "top">
<asp:textbox id= "tbcity" runat = "server"/>
<asp:textbox id= "tbstate" runat = "server"/>
<asp:textbox id= "tbzip" runat = "server"
size=5 />
</td>
</tr>
<tr>
<td valign= "top">phone:</td>
<td valign= "top">
<asp:textbox id= "tbphone" runat = "server"
size = 11/><p>
</td>
</tr>
<tr>
<td colspan = "2" valign = "top" allign = "right">
<asp:button id = "btsubmit" runat ="server" text ="add"
onclick = "submit" />
</td>
</tr>
</table>
</asp:panel>
</form>
</body></html>
Here is my insert statement: StringBuilder sb = new StringBuilder(); sb.Append("INSERT INTO patients_import_test "); sb.Append("(Referral_Number,Referral_Date,FullName,Patient_ien,DOB,FMP,SSN_LastFour,Race_Id,PCM,Age) "); sb.Append("VALUES(@rnum,@rdate,@fname,@patid,@birthDate,@fmp,@ssan,@race,@pcm,@age) "); sb.Append("WHERE Referral_Number NOT IN ( SELECT Referral_Number FROM patients_import_test )");I'm getting an "Incorrect syntax near the keyword 'WHERE'".If I remove the WHERE clause the INSERT statement work fine.
View 3 Replies View RelatedHi,
I have a problem as shown below
Server Error in '/ys(Do Not Remove!!!)' Application.
Syntax error in INSERT INTO statement.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.OleDb.OleDbException: Syntax error in INSERT INTO statement.
Source Error:
Line 8: <Script runat="server">
Line 9: Private Sub InsertAuthorized(ByVal Source As Object, ByVal e As EventArgs)
Line 10: SqlDataSource1.Insert()
Line 11: End Sub ' InsertAuthorized
Line 12: </Script>
Source File: C:Documents and SettingsDream_AchieverDesktopys(Do Not Remove!!!)Authorizing.aspx Line: 10
Stack Trace:
[OleDbException (0x80040e14): Syntax error in INSERT INTO statement.]
System.Data.OleDb.OleDbCommand.ExecuteCommandTextForSingleResult(tagDBPARAMS dbParams, Object& executeResult) +177
System.Data.OleDb.OleDbCommand.ExecuteCommandText(Object& executeResult) +194
System.Data.OleDb.OleDbCommand.ExecuteCommand(CommandBehavior behavior, Object& executeResult) +56
System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method) +105
System.Data.OleDb.OleDbCommand.ExecuteNonQuery() +88
System.Web.UI.WebControls.SqlDataSourceView.ExecuteDbCommand(DbCommand command, DataSourceOperation operation) +392
System.Web.UI.WebControls.SqlDataSourceView.ExecuteInsert(IDictionary values) +410
System.Web.UI.WebControls.SqlDataSource.Insert() +13
ASP.authorizing_aspx.InsertAuthorized(Object Source, EventArgs e) in C:Documents and SettingsDream_AchieverDesktopys(Do Not Remove!!!)Authorizing.aspx:10
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +75
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +97
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4919
And part of my program is as shown
<Script runat="server">
Private Sub InsertAuthorized(ByVal Source As Object, ByVal e As EventArgs)
SqlDataSource1.Insert()
End Sub ' InsertAuthorized
</Script>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DIP1ConnectionString %>" ProviderName="<%$ ConnectionStrings:DIP1ConnectionString.ProviderName %>"
InsertCommand="Insert Into Authorize (Army ID,Tag No,Vehicle ID,Vehicle Type,Prescribed Route,Start Time, End Time) VALUES (@ArmyID, @TagNo, @VehicleID, @VehicleType, @PrescribedRoute, @StartTime, @EndTime)">
<insertparameters>
<asp:formparameter name="ArmyID" formfield="ArmyID" />
<asp:formparameter name="TagNo" formfield="TagNo" />
<asp:formparameter name="VehicleID" formfield="VehicleID" />
<asp:formparameter name="VehicleType" formfield="VehicleType" />
<asp:formparameter name="PrescribedRoute" formfield="PrescribedRoute" />
<asp:formparameter name="StartTime" formfield="StartTime" />
<asp:formparameter name="EndTime" formfield="EndTime" />
</insertparameters>
</asp:SqlDataSource>
Anybody can help? thanks
Public DBString As String = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=Q:VoicenetRTS FolderRTS ChargesAccountscosting.mdb"
Private Sub Button13_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button13.Click
Dim connstring As New OleDbConnection(DBString)
connstring.Open()
Dim searchstring As String = "SELECT * FROM Costings1"
Dim da As New OleDbDataAdapter(searchstring, connstring)
Dim DS As New DataSet()
Dim dt As DataTable = DS.Tables("Costings1")
da.FillSchema(DS, SchemaType.Source, "Costings1")
da.Fill(DS, "Costings1")
Dim cb As New OleDbCommandBuilder(da)
da.InsertCommand = cb.GetInsertCommand
da.UpdateCommand = cb.GetUpdateCommand
Dim dr As DataRow = DS.Tables("Costings1").NewRow
dr("Key") = TextBox1.Text
dr("CODE") = TextBox2.Text
dr("Element") = TextBox3.Text
etc...
DS.Tables("Costings1").Rows.Add(dr)
da.Update(DS, "Costings1") <<<<<<<<<<<Syntax error in INSERT INTO statement.
There are no spaces in the field names.
Folks!
What is wrong with my syntax with the following command?:
alter table EmployeeInfo alter column OriginDate smalldatetime not null default getdate()
I'm getting:
Incorrect syntax near the keyword 'default'
Currently, in my table OriginDate is nullable with no default.
Thanks in advance for your help!
APF
Following is the stored procedure iam trying to create.Here i am trying to
First create a table with the table name passed as parameter
Second I am executing a dynamic sql statement ("SELECT @sql= 'Select * from table") that returns some rows.
Third I want to save the rows returned by the dynamic sql statement ("SELECT @sql= 'Select * from table") in the tablei created above.All the columns and datatypes are matching.
This table would be further used with cursor.
Now i am getting a syntax error on the last line.Though i doubt whether the last 3 lines will execute properly.Infact how to execute a sp_executesql procedure in another dynamic sql statement.ANy suggestions will be appreciated.
CREATE PROCEDURE [dbo].[sp_try]
@TempTable varchar(25)
AS
DECLARE @SQL nvarchar(MAX)
DECLARE @SQLINSERT nvarchar(MAX)
BEGIN
--create temp table
SELECT @Sql= N'CREATE TABLE ' + QUOTENAME(@TempTable) +
'(
ContactName varchar (40) NOT NULL ,
ContactId varchar (30) NOT NULL ,
ContactrMessage varchar (100) NOT NULL,
)'
EXEC sp_executesql @Sql, N'@TempTable varchar(25)', @TempTable = @TempTable
SELECT @sql= 'Select * from table'
SELECT @sqlinsert = 'INSERT INTO ' + quotename( @TempTable )
SELECT @sqlinsert = @sqlinsert + EXEC sp_executesql @sql, N'@Condition varchar(max)', @Condition=@Condition
EXEC sp_executesql @SQLINSERT, N'@TempTable varchar(25)', @TempTable = @TempTable
Hi All I'm having a bit of trouble with an sql statement being inserted into a database - here is the statement: string sql1;
sql1 = "INSERT into Customer (Title, FirstName, FamilyName, Number, Road, Town,";
sql1 += " Postcode, Phone, DateOfBirth, email, PaymentAcctNo)";
sql1 += " VALUES (";
sql1 += "'" + TxtTitle.Text + "'," ;
sql1 += "'" + TxtForename.Text + "'," ;
sql1 += "'" + TxtSurname.Text + "'," ;
sql1 += "'" + TxtHouseNo.Text + "',";
sql1 += "'" + TxtRoad.Text + "',";
sql1 += "'" + TxtTown.Text + "',";
sql1 += "'" + TxtPostcode.Text + "',";
sql1 += "'" + TxtPhone.Text + "',";
sql1 += "'" + TxtDob.Text + "',";
sql1 += "'" + TxtEmail.Text + "',";
sql1 += "'" + TxtPayAcc.Text + "')"; Which generates a statement like:INSERT into Customer (Title, FirstName, FamilyName,
Number, Road, Town, Postcode, Phone, DateOfBirth, email, PaymentAcctNo) VALUES ('Mr','Test','Test','129','Test Road','Plymouth','PL5
1LL','07855786111','14/04/1930','mr@test.com','123456') I cannot for the life of me figure out what is wrong with this statement. I've ensured all the fields within the database have no validation (this is done within my ASP code) that would stop this statement being inserted. Line 158: dbCommand.Connection = conn;Line 159: conn.Open();Line 160: dbCommand.ExecuteNonQuery();Is the line that brings up the error - I presume this could be either an error in the statement or maybe some settings on the Database stopping the values being added. Any ideas which of this might be ? I'm not looking for someone to solve this for me, just a push in the right direction! Thanks!
I am having this error when using execute query for CTE
Help will be appriciated
Hi,
I am a newbie to this site and hope someone can help....
I have a select statement which I would like to create an extra column and put an if statement in it.... Current syntax is:
if(TL_flag= '1', "yes") as [Trial Leave]
it is coming up with an error.... I can use Select case but I should not need to as this should work?
Any ideas?
Hi,
I created a sqldatasource (sql server) and a gridview.In the aspx file, i can see the selectcommand:
SelectCommand="select email from mytable"
Now, i want to modify something in the selectcommand produced in the aspx file, in order to get the emails in clickable mode. I knwow i have to add a string like:
<a hef="mailto:mailaddress">mailadress</a>
So i tried this:
SelectCommand="select '<a href="mailto:'+ email +'">' , email + '</a>' from email
But this gives the error: "tag is not well formed".The problem is the " around mailto:
Thanks
Cl.
Here is an sql query but it keeps giving me an error of (Incorrect syntax near keywork ON)
here is the sql, don't get why this doe not work when I have done it this way multiple times.
select DISTINCT c.strSSN, p.sidstrNAME_IND,
p.sidstrGR_ABBR_CODE, p.sidstrSSN_SM, p.sidstrST_ADDR, p.sidstrADDR_CITY, p.sidstrSTATES_US, p.sidstrZIP_CODE, p.sidstrPAY_GR, p.sidstrMARTL_STAT,
p.sidstrNBR_EXEMPT, p.sidstrST_TAX_CODE, u.lsdbstrPHONE_NBR_HOME, case when sidstrTech_SVC_Code in ('M', 'R', 'S', 'T', 'U', 'Z') then
case when sidstrACT_STAT_PROG in ('5', 'A', 'E', 'F', 'N', 'R', 'S', 'T') then 'AGR' else 'Tech' end else 'M-Day' end
as status from tblAssignedPersonnel as c on ap.strssn = p.sidstrSSN_SM Inner Join
cms.dbo.tblLSDB as u on u.lsdbstrSSN_SM = c.strSSN inner joincms.dbo.tblSidpers as p on ap.strSSN = p.sidstrSSN_SM where intUICID = (select intUICID from tblUIC
where strUIC = '2' and intTaskForceID = '1') order by p.sidstrNAME_IND
I need to use IF-THEN in a SQL Select statement. Using Google
I have found a couple of obscure references to this but nothing that I
can use. Tried various combinations without luck. Can
anyone point me to a good resource or supply a simple example of proper
syntax? Thanks in advance for any help provided.
SqlConnection myConnection = new SqlConnection(ConfigurationManager.ConnectionStrings["ConnectionString2"].ToString()); SqlCommand myCommand = new SqlCommand("SELECT (Deadline, Description, Headline, AddressField, OrganizationField, NameField, FileField, EmailField, CommentField) FROM RegistrationFormDB_Info WHERE (UserName = @UserName AND TournamentName = @TournamentName)", myConnection); SqlParameter myParam = new SqlParameter(); myParam.ParameterName = "@UserName"; myParam.Value = User.Identity.Name; myCommand.Parameters.Add(myParam); myParam = new SqlParameter(); myParam.ParameterName = "@TournamentName"; myParam.Value = Request.QueryString["TournamentName"]; myCommand.Parameters.Add(myParam); myConnection.Open(); SqlDataReader myReader = myCommand.ExecuteReader(); <====================== I continue to get this error and I can't figure out the problem! Anything helps. Thank you very much.
View 1 Replies View RelatedHello,
I have the following statement that I am trying to convert to a "like" statement in a SqlDataSource for a web application. I can't seem to get the syntax correct. Would someone be able to assist with this? Thanks!
SELECT * FROM [Employees] WHERE ([LName] = @LName) ORDER BY [LName], [FName]
Something like below.
SELECT * FROM [Employees] WHERE ([LName] LIKE '@LName%') ORDER BY [LName], [FName]
What is the syntax for making a query using like, the below is my code
<asp:SqlDataSource ID="Search" runat="server"
ConnectionString="<%$ ConnectionStrings:DatabaseConnectionString %>"
ProviderName="<%$ ConnectionStrings:DatabaseConnectionString.ProviderName %>"
SelectCommand="SELECT * FROM [Products]WHERE category LIKE %@category%">
<SelectParameters>
<asp:QueryStringParameter Name="category"
QueryStringField="category" Type="string" />
</SelectParameters>
</asp:SqlDataSource>
Its giving a syntax error but I dont know how to change it.
Please advise, thanks!
Hi all,
I am a java developer having little bit knowledge in sql statements.
can any body guide me what is the effective way of using sql statement
to achieve the following goal.
here is the requirement.
1. There are 2 tables A & B.
2.The table 'B' may or maynot have an equivalent entry for the primary
key of table a.
3. select column1 (of A), column 2(of B) from table a and b.
4. now column2 should give a value, if there is a corresponding
entry in table b.other wise null.
5. at any time there may be 0 to 1 record in table b for the primary
of table a.
thanks in advance
krishna
Can someone tell me what is wrong with my syntax? I am getting several errors:
Incorrect syntax near keyword 'CASE'
Incorrect syntax near keyword 'WHEN'
Incorrect syntax near '@Tablename'
CREATE PROCEDURE al_readcampsignup
@User_ID int,
@Pagenumber smallint,
@Tablename varchar(10)
AS
CASE @Mypagenumber WHEN 1 THEN SELECT Blah FROM tempcampsignup WHERE Camp_ID = @User_ID WHEN 2 THEN SELECT Blah FROM @Tablename WHERE Camp_ID = @User_ID WHEN 3 THEN SELECT Blah FROM @Tablename WHERE Camp_ID = @User_ID END
Thanks
I inherited a query and I am getting an error of Unsupported literal in join in the INNER JOIN FRDM.dbo.MEMBER_SUBSC FRDM_dbo_MEMBER_SUBSC2
ON (frdm.dbo.CLAIM_HEADER_WITH_VOIDS_VIEW.SBSB_CK = FRDM_dbo_MEMBER_SUBSC2.SBSB_CK AND FRDM_dbo_MEMBER_SUBSC2.MEME_SFX
= '00')statement. Specifically the AND FRDM_dbo_MEMBER_SUBSC2.MEME_SFX
= '00')part.
SELECT frdm.dbo.CLAIM_HEADER_WITH_VOIDS_VIEW.GRGR_ID AS 'group number'
[code]....
Hi, I'm new to SQL and was wondering if there was an easier way to filter data.
I have two tables -
The first table called Names of Companies has a column named: NAMES
NAMES
XYZ Company
ABC Limited Liability Company
ZZZ Corporation
KKK Inc.
ABC Inc.
The second table called Keywords has a column named: WORDS
WORDS
Company
Limited
I want to search for all NAMES that contain the WORDS in some form
The results should be:
NAMES
XYZ Company
ABC Limited Liability Company
Technically, I can get the results I want by manually typing into the SQL statement all the words that appear in the WORDS column.
SELECT *
FROM [Names of Companies]
WHERE [Names of Companies].Names Like "*Company*" Or ([Names of Companies].Names) Like "*limited*"));
But is there a way that I reference the table Keyword instead of typing into the query statement all the words that appear in the column WORD? I have a lot of words to search for.
Can anyone recommend a better way to do this?
Thanks for all your help!
Hi,I'm new to SQL Server Programming, I work with ASP a lot, but latelyI've been trying to create Stored Procedures, etc. I'm having aproblem writing a simple IF statement.. I don't seem to understand whyit's giving me this error. I've search around on Google Groups, but Istill don't get it.=================USE msdbIF NOT EXISTS (SELECT * FROM sysjobs WHERE name = 'Scheduled Nightfax')END=================My error is:Server: Msg 156, Level 15, State 1, Line 5Incorrect syntax near the keyword 'END'.Thanks for any help.
View 2 Replies View RelatedI am attempting to mask a user's SS# based on Users.DisplaySSN. I have gone over the code time and time again and can't find where the error is.
Error I'm getting:
Incorrect syntax near the keyword 'AS'.
Here's where the error lies:
CASE
(SELECT DisplaySSN FROM Users WHERE Users.UserID = @UserID)
WHEN False THEN
'xxx-xx-xxxx' + right(SocialSecurityNumber,0) AS SocialSecurityNumber
ELSE
vwEmp.SocialSecurityNumber
END
Hi All -I am updating four values. What is the proper syntax to have thefollowing 4 update statements as one statement?set objRec = objDB.Execute("Update orientform set session = '" &strSession & "' where id = '" & strid & "'")set objRec = objDB.Execute("Update orientform set fname = '" & strfname& "' where id = '" & strid & "'")set objRec = objDB.Execute("Update orientform set gender = '" &strgender & "' where id = '" & strid & "'")set objRec = objDB.Execute("Update orientform set lname = '" & strlname& "' where id = '" & strid & "'")Thanks,Joey
View 1 Replies View RelatedI've created multiple select statement to pull in varies fields from a table and one of those fields is Fiscal_Year, however, after the select statement I'm adding a Where clause:
Where Fiscal_Year = '2013'
And I keep getting a syntax error??
I am using @strsql to construct the where condition for a select query.
Can you please correct my syntax.
DECLARE @strsql nvarchar(2000)
IF @ProgNO <> '' then
strsql = WHERE ProgNO = @ProgNO
end if
If @ProjNO <> '' then
if strsql <> '' then
strsql = strsql & " and ProjNO =@ProjNO
ELSE
strsql = wHERE ProjNO =@ProjNO
END IF
END IF
Thank you very much.
Hello experts!
I have a case statement that provides filtering of hours during certain days of the week. An example is the data I want to show on Sunday is different from the rest of the week. I am using....
Code Snippet
WHERE ((CASE WHEN Datepart(dw, TestDateTime) = 1 AND datepart(hh, TestDateTime) BETWEEN 8 AND 22 THEN 1 WHEN Datepart(dw, TestDateTime)
>= 2 AND datepart(hh, TestDateTime) BETWEEN 6 AND 23 OR
datepart(hh, TestDateTime) BETWEEN 0 AND 2 THEN 1 ELSE 0 END) >= @ShowCore)
Esentially it gives a parameter (@showcore) to where it shows the filtered hours when 1 is selected, and all hours if 0 is selected.
Basically, Sunday I want to show transaction from between 8am and 10pm, All other days would be 12am - 2am and 6am to 11:59:59 when selecting 1 as the parameter.
Any help is appreciated.
What is the T-SQL command to check for NULL or '' in a field in one statement? I would like to change the following code to be more readable (without the OR).
IF @agent IS NULL OR @agent = ''
Thanks!
Hi,
I need to UPDATE the IP Address of a newly created user into a table (the value is currently set to default - " Not Available"), and I really dont know the syntax required to do this. So far I've derived all the variables needed using the following code:
protected void ContinueButton_Click(object sender, EventArgs e)
{
//Get the ip address and put it into the customer table - (the instance of this user now exists)
MembershipUser _membershipUser = Membership.GetUser();
Guid UserId = (Guid)_membershipUser.ProviderUserKey;<--------------------------------------------------------------I can see the UserId here if I pause the prog
SqlDataSource customerDataSource = new SqlDataSource();
customerDataSource.ConnectionString = ConfigurationManager.ConnectionStrings["ConnectionString"].ToString();
customerDataSource.UpdateParameters.Add("IPAddress", Request.UserHostAddress.ToString());<---------------------------------------I can see the IPAddress here
customerDataSource.UpdateCommandType = SqlDataSourceCommandType.Text;
what next
I've not got a clue as to what to write next. There is a try / catch statement after this using :
rowsAffected = customerDataSource.Update();
which remains at 0 no matter what I try.
Any help greatly appreciated.
Hi All,
i have migrated a DTS package wherein it consists of SQL task.
this has been migrated succesfully. but when i execute the package, i am getting the error with Excute SQL task which consists of Store Procedure excution.
But the SP can executed in the client server. can any body help in this regard.
Thanks in advance,
Anand