Implement Manual Replication Between Two SQL Server 2005 Express?
Mar 2, 2007
Hi,
I need to synchronize the data between two SQL Server 2005 Express.
The database is really simple, just few tables (but data are inserted very often) without any triggers.
Since Express edition could not behave as a Publisher I was thinking about implementing manually a sort of Replication mechanism... It should be a sort of Transactional Replication with queueud updating.
Does it sound a good idea?
Has anyone done this before o there are better solution?
Thanks in advance,
Stefano
View 6 Replies
ADVERTISEMENT
Jun 7, 2007
Hello,
I want to set up As400 DB as a publisher and the sql server 2005 as a subscriper, so that I can read some data from AS400 DB in sql server 2005 and every evening, I need the replicated data from AS400 to be refreshed.
Can I do it ? If yes, how to do it?
Thanks
View 1 Replies
View Related
Jan 22, 2007
HI
Q1: Does Sql Server 2005 Express support Web/Internet to other SQL Server 2005 Express Clients or does it have to Synch across the internet to a fully installed setup SQL Server 2005 with IIS?
Q2: Does SQL Server 2005 Express support Direct Replication between other SQL Server 2005 Express clients?
Regards
View 5 Replies
View Related
Sep 25, 2007
We have a large number of clients attempting to replicate two publications on 2005 Express databases (2 publications subscribed to the one subscriber database) with our 2005 Server (9.00.3042.00 SP2 Standard Edition) and experiencing two significant problems:
1) Users experience the following message:
The Merge Agent failed after detecting that retention-based metadata cleanup has deleted metadata at the Subscriber for changes not yet sent to the Publisher. You must reinitialize the subscription (without upload).
This problem should not apparently occur with SQL Server 2005 (or 2005 Express) instances with SP2 applied. All clients experiencing this problem have SP2 installed as does our Server and the retention period is 30 days. The subscribers have been replicating well under that.
2) Replications never succeed after appearing to replicate/loop around for hours
This issue is the most critical as we have clients who have been installed and re-installed with new instances of SQL Server 2005 Express, new empty databases (on subscriber before snapshot extraction), and using fresh snapshots (less than an few hours old) which cannot successfully replicate.
Interestingly there is at least 1 instance where several computers are subscribed and successfully replicating the same database as another where replication refuses to succeed.
To test we have taken a republished database from another 2005 Server which is working fine and restored it to the same server as the one holding the database with which we are experiencing problems and subscribed to it. This test worked fine and replication of both publications went through fast and repeatedly without showing any signs of problem.
This indicates that the problem is perhaps data related as it appears localised to that database.
Below are two screenshots which may assist.
Screenshot 1 Shows that on the server side the replication attempts look like they are succeeding despite the fact that the subscriber end does not indicate success. Also the history indicates the the subscription has spent all it's time initialising and not merging any changes.
Screenshot 2 Shows a rogue process which has appears on many of the problem child subscribers. It shows a process running with no end time even though the job indicates failure in the message and even though other replication attempts appear to have succeeded after it. This process stays in the history showing that it is running even when I can find no corresponding process for it.
Can anyone suggest a further course of action/further testing/further information required which may assist?
This is extremely urgent and any assistance would be greatly appreciated!
Thanks in advance!
Scott
View 5 Replies
View Related
Oct 31, 2006
Hello,
I am facing problems trying to replicate SQL Server 2000 table to SQL 2005 Express. The error says:
"login failed for user 'username'. The user is not associated with a trusted SQL server connection"
PS:
The same happens when I try to register the SQL 2005 server in SQL 2000 Enterprise Manager.
Any help?
Thanks
Walid
View 5 Replies
View Related
Sep 15, 2006
I want to replicate data from sql server 2000 to a sql server express 2005 box.
I can dts data across..but I want to be able to set up push replication from the Sql Server 2000 box, but the option to push the data to the Sql Express server in the GUI does not come up only Sql Server 2000 boxes are listed. Initially I will be using Snapshot replication but would like to eventually move on to transactional rep if only I can get it to push the data across.
Does anyone know how to acheive this thanks for any help Sammy.
View 3 Replies
View Related
Feb 25, 2008
Wondering if anyone has any experience with SQL Server Express Edition (SSEXP). We're looking at a mobile sales force type model, so a local database on a laptop with no real time network connection. So the users would collect data locally, then connect up to the network every few days to replicate the data to a central server.
So questions.. Has anyone tried anything similar? How stable/mature is SSEXP? Any other thoughts, alternatives or gotchas anyone can think of?
Thanks for the input.
View 1 Replies
View Related
Mar 26, 2008
Want to implement replication in sql server 2005
Kindly let me know how to do it.
Please
regards
cmrhema
View 2 Replies
View Related
Aug 30, 2006
Hi,
We are developing the web application using ASP.NET 2.0 using C# with Backend of SQL Server 2005.
Now we have one requirement with my client, Already our application live in ASP using MS Access Database. In Access Database our client already wrote the query, those query call the another query from same database. So I want to over take this functionality in SQL Server 2005.
In ASP Application, We call this query €œ081Stats€? from Record set.
This €˜081Stats€™ query call below sub query itself
Master Query: 081Stats
SELECT DISTINCTROW [08Applicants].school, [08Applicants].Applicants, [08Interviewed].Interviewed, [Interviewed]/[Applicants] AS [interviewed%], [08Accepted].Accepted, [Accepted]/[Applicants] AS [Accepted%], [08Dinged].Dinged, [Dinged]/[Applicants] AS [Dinged%], [08Waitlisted].Waitlisted, [Applicants]-[Accepted]-[Dinged] AS Alive, [08Matriculating].Matriculating, [Matriculating]/[Accepted] AS [Yield%]
FROM ((((08Applicants LEFT JOIN 08Interviewed ON [08Applicants].school = [08Interviewed].school) LEFT JOIN 08Accepted ON [08Applicants].school = [08Accepted].school) LEFT JOIN 08Dinged ON [08Applicants].school = [08Dinged].school) LEFT JOIN 08Waitlisted ON [08Applicants].school = [08Waitlisted].school) LEFT JOIN 08Matriculating ON [08Applicants].school = [08Matriculating].school;
Sub Query 1: 08Accepted
SELECT statusTbl.school, Count(1) AS Accepted
FROM statusTbl
WHERE (((statusTbl.decision)=1) AND ((statusTbl.yearapp)="2008"))
GROUP BY statusTbl.school
ORDER BY Count(1) DESC;
Sub Query 2: 08Applicants
SELECT statusTbl.school, Count(1) AS Accepted
FROM statusTbl
WHERE (((statusTbl.decision)=1) AND ((statusTbl.yearapp)="2008"))
GROUP BY statusTbl.school
ORDER BY Count(1) DESC;
Sub Query 3: 08Dinged
SELECT statusTbl.school, Count(1) AS Dinged
FROM statusTbl
WHERE (((statusTbl.decision)=0) AND ((statusTbl.yearapp)="2008"))
GROUP BY statusTbl.school
ORDER BY Count(1) DESC;
Sub Query 4: 08Interviewed
SELECT statusTbl.school, Count(1) AS Interviewed
FROM statusTbl
WHERE (((statusTbl.interview)=True) AND ((statusTbl.yearapp)="2008"))
GROUP BY statusTbl.school
ORDER BY Count(1) DESC;
Sub Query 5: 08Matriculating
SELECT statusTbl.school, Count(1) AS Matriculating
FROM statusTbl
WHERE (((statusTbl.userdec)=True) AND ((statusTbl.yearapp)="2008"))
GROUP BY statusTbl.school
ORDER BY Count(1) DESC;
So now I got the solution from SQL Server 2005. I.e. Common Table Expressions, So I got the syntax and other functionality, Now my doubts is how do implement the CTE in SQL Server 2005, where can I store the CTE in SQL Server 2005.
How can I call that CTE from ASP.NET 2.0 using C#?
CTE is replacing the Stored Procedure and Views, because it is memory based object in SQL Server 2005.
How can I implement the CTE, where can I write the CTE and where can I store the CTE.
And how can I call the CTE from ASP.NET 2.0 using C#.
It€™s Very Urgent Requirements.
We need your timely help.
With Thanks & Regards,
Sundar
View 1 Replies
View Related
Dec 3, 2007
Hi All,
I am now working on the design phase of my project, we are looking to implement Change Data Capture (CDC) but i need some help if you guys has implemented before using the SSIS 2005 componets. I am trying to use the Following:
Source---------Derived Column---------Lookup---------------Conditional Split (to split New records and Updated Records)-----------Destination. Respectively.
Lets make it clear, my source holds (Old records and newly added or Updated records), the Derived Column is to Derive new columns called Insert_Date and Update_Date. The Lookup i am Using is to look the Fact_Table(the Old Records) as Reference, and then based on this lookup i will split the records on timely based using the Conditional Split. My question is
1. Am i using the right components?
2. what consideration should i have to see to make it true (some Logics on the conditional split)?
3. Any script which helps in this strategy?
4. If you have a better idea please try to help me, i need you help badly.
Thank you,
SamiDC
View 11 Replies
View Related
Sep 29, 2005
Hi All,
I am required to setup Transactional Replication between two database servers (SQL Server 2000) but am expected to do it through scripts and not through wizards.
So can anybody help me out on that front?
Thanks & Regards,
Rohit Saksena
View 1 Replies
View Related
Jan 11, 2008
how do i implement Snap shot replication..?
(IN SQL EXPRESS SERVER)
thanks.
View 1 Replies
View Related
Jun 8, 2004
how to implement the replication with the System Stored Procedures or the Transact-SQL ?
i want to encapsula my replication and make it be reusable and ease to use.So i want to do the replication in a script file.how can i do this?
Thanks.
View 9 Replies
View Related
Aug 8, 2006
When I installed VS 2005, it installed the default version of SQL Server 2005 Express that ships with Visual Studio 2005 installer media.
How can apply SQL Server 2005 Express SP1 to update this existing instance?
Currently, if I run this query:
SELECT @@version
I get the following:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
After applying SP1, I should get 9.00.2047.00.
Should I just go to this link and download & install the SQL Server 2005 Express Edition SP1:
http://msdn.microsoft.com/vstudio/express/sql/download/
Thank you,
Bashman
View 11 Replies
View Related
Dec 28, 2007
Hi Guyz
it is taken from SQL2K5 SP2 readme.txt. Anyone have idea what to do to implement this ?
Our sp2 is failing. we suspect the above problem and researching it.we are running on default instance of SQL2K5 on win2003 ent sp2
"When you apply SP2, Setup upgrades system databases. If you have implemented restrictions on the ALTER DATABASE syntax, this upgrade may fail. Restrictions to ALTER DATABASE may include the following:
Explicitly denying the ALTER DATABASE statement.
A data definition language (DDL) trigger on ALTER DATABASE that rolls back the transaction containing the ALTER DATABASE statement.
If you have restrictions on ALTER DATABASE, and Setup fails to upgrade system databases to SP2, you must disable these restrictions and then re-run Setup."
thanks in advance.
View 4 Replies
View Related
Apr 30, 2006
Hello:
I tried to set up a pull transctional replication on SQL Express 2005.
The publisher is SQL 2000 which has tables that have primary keys.
However, only tables I see in my SQL express (Subscriber) are the system tables. What did I do wrong?
I can't find the right answer on the web.
Thanks
GCP
View 1 Replies
View Related
Oct 11, 2006
Hi,
does any know of any plans to support publications in Sql 2005 Express? I want to start moving away from MSDE but we use replication (one MSDE database is the publisher and several client PC's use MSDE as the subscribers.).
Maybe it is on SP2?
Thanks for any info you have on this.
Graham
View 5 Replies
View Related
Nov 22, 2006
I have tried to setup Web replication following the instructions in the articles in SQL Books Online, using RMO. I am able to create the subscription, but when I try to sync it I get the following error.
The process could not create file 'C:DOCUME~1lsimpsonLOCALS~1TempHNTBW115D$B_borings_BoringsAll_C:BORINGSBORINGDB.MDF' due to OS error 123.
Is anyone familiar with this error? If I can solve it, I think the replication will work.
View 7 Replies
View Related
Apr 16, 2006
I am attempting to set up the following:
SQL Server 2005 with Merge Publication
Web Replication Enabled
IIS Configured as documented, except DB server is an AD Domain Controller so can't assign Local User to Application Pool
SQL 2005 Express
Using RMO to create subscription
Using Basic Authentication of HTTPS
Calling the replisapi.dll?diag works fine
When I attempt to do a web synchronization with the Publisher, I get the following error:
The Merge Agent could not connect to the URL 'https://test.abc.com/TestWebReplication/replisapi.dll' during Web synchronization. Please verify that the URL, Internet login credentials and proxy server settings are correct and that the Web server is reachable.
Does anyone have any suggestions. I am sure it has something to do with the security setup on the Publisher, but I can't think of anything else to try.
Thanks
View 6 Replies
View Related
Jan 8, 2007
Hi All,
I am trying to do a Replication between a network SQL Server Express Edition 2005 DB with a client SQL Server Express Edition 2005 DB. My question is
1. Can we do replicaiton between SQL Server Express Edition 2005. (No SQL SERVER present)
2. If yes can any of you provide me some guidance or some pointers on how to achieve it.
Thanks
Suresh
View 1 Replies
View Related
Jul 7, 2006
Hello,I am learning SQL Server 2005 Express. I need to test replication butwhen I run New Subscription Wizard I got error: "There are nopublications to which you can subscribe, either because this serverhas no publications or because you do not have sufficient privilegesto access the publications."I see no option for publications. Does this mean that in Express Icannot run replication? If I can, how?Thank you very much/RAM/
View 4 Replies
View Related
Feb 6, 2006
Hi Everyone
I have a huge problem after I noticed that SQL Server Agent has been removed
and need your advice about how to program replication between SQL Server Express and SQL Server 2005
So far I have encountered the following problems
SNAPSHOT
1. When I created my snapshot Irealized it wasnt running. I then read from the documentation that i had to resort to the Windows Synchronization Manager as there was no SQL Server AGENT within SQL Server Express to accomplish this function
I did this and it worked but wouldlike to control this programmatically as well
REPLICATION
2. Now I have a standalone SQL Server Express which is a subsciber to the SQL Server 2005 Database
How can I force the merge replication programmatically ie Vb.NET
Your kind advice is appreciated
Regards
Touraj
View 3 Replies
View Related
May 9, 2006
yiotis writes "Is there a way where you can programmatically (via visual basic) replicate two or more SQL Express databases located on multiple computers without the need of SQL Server 2005 acting as a publisher. From what i understand this is a limitation in SQL Express.
Right now i have SQL Express installed on 2 machines. I am able via vb to communicate with each database, read and write data between databases but cannot seem to figure out how to perform a simple replication.
Bottom line is, i need to be able to replicate via vb code 2 sql express databases with each other.
Thanks"
View 1 Replies
View Related
Aug 27, 2007
Hello all,
We have 2 sites . each one has sql 2005 express edition .
is it possible to configure replication between those 2 sql servers for failover purposes ?
Thanks
View 1 Replies
View Related
Oct 4, 2006
If i have been using sql server 2005 express for developing my application and i decide to upgrade to sql server 2005 express with advanced services while still working on the same application, what will happen to my application's database. Can i be able to continue with my work with out any major regrets.
View 1 Replies
View Related
Dec 11, 2006
Hi,
I'm trying to learn some VB programming with the VB 2005 Express Absolute Beginner Series video tutorials (which I think is great) and have come across a problem that I can't solve.
When I follow the instructions in Lesson 9 (Databinding Data to User Interface Controls) my application will display the data from the database correctly and I can edit it (and as long as the debugger is running the data remains changed). However, the changes won't propagate back to the database. I don't get any error messages but after I edit the data, save (with the save button on the BindingNavigator toolbar), and end debugging the data in my database remains unchanged. When I use a MessageBox to show how many rows where edited/updated in the
Me.myTableTableAdapter.Update(Me.myDatabaseDataSet.myTable)
I get the correct number back. I'm sure the problem is not due to coding errors since I've also tried running the accompanying Lesson 9 project file that can be downloaded from MSDN and the problem persists.
I'm using Windows XP SP2, SQL Server 2005 Express Edition and VB 2005 Express Edition. I've tried installing SQL Server 2005 Express with a number of different settings, including default settings, but it doesn't make any difference.
Would greatly appreciate any feedback on this as I'm keen to resolve this problem so I can get on with the next tutorial lesson.
Thanks,
Ieyasu
View 6 Replies
View Related
Sep 13, 2006
HiIm trying to connect Visual Basic Express 2005 to a remote SQL Server Express 2005. I cant find how i can do that in VB.net Express.In Web developer there are no problem to connect to a remote SQL server but i cant find it in VB.net Express. The XP with the SQL server that i want to connect to is on the local network. Greatful for help!
View 1 Replies
View Related
Jun 13, 2007
Hi Guys,
I created a Product database table using Visual Basic 2005 Express and SQL Server 2005 Express. I have just added a new column [Picture] to the database table, which of course, should store an image or picture of a product. I am writing to kindly ask you guys for help .
i) How do I include image files into this column [Picture]?
ii) How do I get this image to display on Visual Basic 2005 Express form, so that when a product is selected the product image is displayed accordingly?
Your help much appreciated. Thanks.
Paul
View 8 Replies
View Related
Jul 9, 2007
I am having trouble setting up my Pull Subscription and I am new to replication.
I have several servers hosting a databased website that will be the same, except for user input and traffic. Quite simply, I need to copy most tables, SPs and data from network to network. I can't use FTP/Web synch ... as I mentioned the networks do not touch eachother or the internet.
On server Web1, it was easy to create a Publication called Pub via the wizard for my database: TheDB. Then on Web1, again, I added a Subscription to the Publication, indicating my second server, Web2, and the same database name: TheDB (I have already backed up and restored TheDB to all my servers). Here's one of the sp's I ran on Web1:
use [TheDB]
exec sp_addsubscription @publication = N'Pub', @subscriber = N'Web2'', @destination_db = N'TheDB', @sync_type = N'Automatic', @subscription_type = N'pull', @update_mode = N'read only'
GO
This is where I feel stuck. Using the wizard on Web2 doesn't allow me to see Web1. So I tried the following on Web2:
use [TheDB]
exec sp_addpullsubscription @publisher = N'Web1', @publication = N'Pub', @publisher_db = N'TheDB', @independent_agent = N'True', @subscription_type = N'pull', @description = N'', @update_mode = N'read only', @immediate_sync = 1
exec sp_addpullsubscription_agent @publisher = N'Web1', @publisher_db = N'TheDB', @publication = N'Pub', @distributor = N'Web1', @distributor_security_mode = 1, @distributor_login = N'', @distributor_password = null, @enabled_for_syncmgr = N'False', @frequency_type = 1, @frequency_interval = 0, @frequency_relative_interval = 0, @frequency_recurrence_factor = 0, @frequency_subday = 0, @frequency_subday_interval = 0, @active_start_time_of_day = 0, @active_end_time_of_day = 0, @active_start_date = 0, @active_end_date = 19950101, @alt_snapshot_folder = N'', @working_directory = N'', @use_ftp = N'True', @job_login = null, @job_password = null, @publication_type = 0
GO
I copied the snapshot folder, ie. 20070709134423, onto CD and moved it into Web2's default replication folder, but I always receive: cannot connect to Distibutor. I've tried using an Alias, as well, but don't understand exactly how I should point that either. I checked the publication's PAL and my Web2 user has rights and is an owner of the Web2 TheDB database.
Any help is appreciated.
Nate
View 10 Replies
View Related
Mar 12, 2007
Hi,
I want to make a component library in Visual Basic.NET and connect to a remote Sql Server. When I create a new DataSet with the wizard, I can only connect to a .mdf file, but not to a Sql Server. With Visual Web Developer I can connect to a Sql server. What is the difference between these enviroments ? How can I do the same with Visual Basic.NET ?
Thanks in advance.
View 1 Replies
View Related
Apr 20, 2006
Currently I have following things installed on my Computer
1. SQL Server Express 2005
2. SQL Server Management Studio Express 2005 CTP
I need to install following things
A. Microsoft SQL Server 2005 Express Edition with Advanced Services
B. Microsoft SQL Server 2005 Express Edition Toolkit
Do I need to uninstall any any of 1 or 2?
What should be my path to upgrade these software.
View 8 Replies
View Related
Jan 27, 2015
I have got the error “a network related or instance specific error occurred sql server 2012 “.I have enabled tcp/ip, restarted the services. The sql server service is getting stopped even after the manual restart. I have checked in event viewer and I noticed a error. Here is the error...The log scan number (43:456:1) passed to log scan in database ‘model’ is not valid. This error may indicate data corruption or that the log file (.ldf) does not match the data file (.mdf). If this error occurred during replication, re-create the publication.
View 1 Replies
View Related
