Hi All
I'm trying to import data from mySQL database to SQL server 2005. I installed mySQL odbc driver (3.51) and configured system DSN. However when I start SQL server import/export wizard mysql is not an option in data source dropdown.
What do I miss?
Thanks,
Vlad.
problem is I don't have unfettered access to the MS SQL Server(7), so I need to send instructions on how to do it to a client.
After reading up a little, I figured "select view into ##tmp_table", and then dump the table, which, if I'm right, means I'll have an SQL dump that I can quite easily import into MySQL.
Problem,: What's the syntax to dump that temp table, or is there a better way to import the data into MySQL
TIA
I'm trying to use linked server to import big amount of data(around 9 million rows) from mysql to a sql 2005 table.
I plan to create a stored procedure and use job agent to run it at off-peak time everyday. The SP is like:
.....
Truncate table sqltblA;
Insert Into sqltblA(col1, col2, col3)
Select col1, col2, col3
From OpenQuery('mysql', 'Select col1, col2, col3 From mytblB')
.....
But when I tried to CREATE the above SP from management studio, seems the sql server was trying to get all data from table mytblB and ended up with failure after several minutes hang. The error message is sth. like "running out memeory". BTW, during that several minutes hang, I can't query mytblB using mysql's tool as well. it seems to me that table got locked.
However if i try to change the returned result to 100,000 rows by changing script to
Insert Into sqltblA(col1, col2, col3)
Select col1, col2, col3
From OpenQuery('mysql', 'Select col1, col2, col3 From mytblB Limit 100000')
The SP could be created without any problem and running the SP could get the data in table sqltblA.
But that's not what I want, I need all rows instead of a certain amount of rows.
Does anyone know what's going on there when I try to CREATE that SP and any solution to it?
Plus I tried to use SSIS as well. When I'm configuring the DataReader source, which uses ADO.NET's ODBC option to connect to mysql, if its sqlcommand is "select * from mytblB" without the Limit key word, then the configuration page will hang there as well and table mytblB is not accessible by using mysql tool. I'm just sick of wasting time on that and that's why I chose to use SP istead of SSIS. But same result. :-(
I need to import data to mysql,
and idea abt that?
thanks
Hello everybody,
I'm a new SQL2005 user.
I'm
trying to import data from MySQL version 5x into my SQL2005 by wizard.
I created a DNS file and tested successfully using MySQL Connector/ODBC
v5.
Everthing seems fine but at the last step selecting data
source. The SQL2005 wizard forced me to choose using SQL command option
instead of selecting tables/views from a list. Anyone can tell me why?
My collegues faced the same case as they help me to find the reason.
I'm sure that there are a few source objetcts in MySQL source.
Any help will be appreciated!!!
khanhmy
Hi all,I am developing a web application and the back end is MySQL database.
Now I want to shift all the data to SQL Server 2005.
Is there any method to do it?
Thanks
Tomy
Can anybody tell how to import a table with the text column from SQL Server 2000 to MySQL 4.0.17?
I tried this using ODBC connection but got an error message saying, "Query-based Insertion or updating of BLOB values is not supported".
How would I import a database in SQL 2005 that was sent to me from a mysql database?
Thank you
A view named "Viw_Labour_Cost_By_Service_Order_No" has been created and can be run successfully on the server.
I want to import the data which draws from the view to a table using SQL Server Import and Export Wizard.
However, when I run the wizard on the server, it gives me the following error message and stop on the step Setting Source Connection
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Error)
Messages
Error 0xc020801c: Source - Viw_Labour_Cost_By_Service_Order_No [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0014019. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
(SQL Server Import and Export Wizard)
Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
- Setting Destination Connection (Stopped)
- Validating (Stopped)
- Prepare for Execute (Stopped)
- Pre-execute (Stopped)
- Executing (Stopped)
- Copying to [NAV_CSG].[dbo].[Report_Labour_Cost_By_Service_Order_No] (Stopped)
- Post-execute (Stopped)
Does anyone encounter this problem before and know what is happening?
Thanks for kindly reply.
Best regards,
Calvin Lam
I am attempting to import data from Microsoft Access databases to SQL Server 2000 using the DTS Import/Export Wizard. I have a few errors.
Error at Destination for Row number 1. Errors encountered so far in this task: 1.
Insert error column 152 ('ViewMentalTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 150 ('VRptTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 147 ('ViewAppTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 144 ('VPreTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 15 ('Time', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Could you please look into this and guide me
Thanks in advance
venkatesh
imtesh@gmail.com
I have connected to my mysql db with myodbc. When I start importing I get errors on some varchar variables.
Some of my varchar(255) becomes varchar(-1) when I import. When this happens smssql fails to create table.
Anyone have a clue?
Thanks.
Getter..
I want to schedule a job to run nightly where a remote mysql database is imported into a local sql server db. I ran through the wizard for scheduling a job, previewed my table data, and viewed the scheduled job in the DTS queue. However, the job never runs. I can't figure out why.
Anyone have any idea why? Is there a step-by-step process somewhere for doing this?
Thanks,
C
Good Morning
Has anyone successfully used cherry's oledb provider for MYSQL to create a linked server from MS SQLserver 2005 to a Linux red hat platform running MYSQL.
I can not get it to work.
I've created a UDL which tests fine. it looks like this
[oledb]
; Everything after this line is an OLE DB initstring
Provider=OleMySql.MySqlSource.1;Persist Security Info=False;User ID=testuser;
Data Source=databridge;Location="";Mode=Read;Trace="""""""""""""""""""""""""""""";
Initial Catalog=riverford_rhdx_20060822
Can any on help me convert this to corrrect syntax for sql stored procedure
sp_addlinkedserver
I've tried this below but it does not work I just get an error saying it can not create an instance of OleMySql.MySqlSource.
I used SQL server management studio to create the linked server then just scripted this out below.
I seem to be missing the user ID, but don't know where to put it in.
EXEC master.dbo.sp_addlinkedserver @server = N'DATABRIDGE_OLEDB', @srvproduct=N'mysql', @provider=N'OleMySql.MySqlSource', @datasrc=N'databridge', @catalog=N'riverford_rhdx_20060822'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'collation compatible', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'data access', @optvalue=N'true'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'dist', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'pub', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'rpc', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'rpc out', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'sub', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'connect timeout', @optvalue=N'0'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'collation name', @optvalue=null
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'lazy schema validation', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'query timeout', @optvalue=N'0'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'use remote collation', @optvalue=N'false'
Many Thanks
David Hills
Hi All,
We will replace our website which currently build in php and mysql into .net and sql server 2005. What is the best way to migrate all the user account from current database in mysql into sql server, also considering that there is different database table and fields?
Thanks in advance.
Hello group,i am relatively new to SQL-Server database, but i have lots ofexperience with DB2 and Oracle Database. One of my tasks is setting upa replication between a Mysql-Database running on Linux and one of ourSQL-Servers.How do i achieve this ?If i understand the documentation correctly you have to program thereplication mechanism for yourself or you have to use some third partytool.Could anyone please outline, how to set up the replication mechanism(pointing me to some web-site should be enough) and also tell me ifthere is any third party tool.Thanks in advance and greetings from ViennaUli
View 1 Replies View RelatedGood Morning
the available oledb providers for mysql don't seem to work with sqlserver 2005.
So whats the best way these days of exposing data from within sql server from a mysql data base.
What I wanted to do was create a linked server connection to the mysql server using either oledb or odbc, but neither seem to work.
There is a .net provider for mysql, but that won't work to create a linked server connection.
any ideas appreciated.
What I want to do is write some scheduled proceedual sql from within sql server to query some tables in mysql and update some sqlserver tables.
thanks
David Hills
Hello,
Finally making the move to ASP.NET! I've been advised that to begin with it is probably best to start using SQL Server 2005 with ASP.NET. All my sites are currently using MySQL. Can anyone advise a way for me to import all the data from a MySQL database to a SQL Server 2005 database. Apologies if this isn't directly related to ASP.NET but any help would be greatly appreciated.
Thanks
Hello Guys,
I'm searching for a way to compare informations from one database against another database.
E.g. i want to check if serialnumbers of my first database (eg hardware.xls or hardware.csv ) are already stored in my sql server database.
I know i can use sql querys (Joins) for that task but i don't know how i can access 2 different databases at the same time. Do i need a tool for it? Does Excel is able to compare those data? But how? I'm searching for that thread since 2 days testing with some tools without any success...
So please help...
Kindly Regards...
Be
Problem: Moving data from mysql to sql server 2005
I am trying to pull data over from mysql to sql server. First the import wizard greys out so I have to put in 1 query at a time which is pain. and second it does not even work! it takes me through the end of the wizard for me to click finish and then says oops it does not work. there was an error!
Anyway i tried going through the ssis route cuz its going to be a nightly job. i used the ado.net odbc connection. It worked but the performance is really not acceptable. it took 5 mins to import 24000 rows where as dts was taking 1 sec to do this. i wish i could use the native mysql odbc 3.51 connector and import. can some one give me step by step instructions on how to do that ?
I hear someone mentioned of using excute sql task which can use mysql odbc 3.51 driver. but since i am new how do i get it to work. say for example in the excute sql task i run a statement like select * from addr. then what?
cuz eventually i want the result to be saved in a sql server table called addr. How can i get the result from that excute sql task and put it inside of an addr table in sql server. should i save the result to a variable of type object. but then how do i get the data from object and tell sql server in the designer that the result contains these columns and it needs to map to these columns in the addr table of sql server.
Very confused. i wish the first option would have given me results which an enterprise ETL gives. but apparently it is too slow that it wont be acceptable in a production envrioment. when i will have millions of rows coming in .
Please anyone can help me in this.
Thanks for the help!
hey all,
i want to know Equivalent of Load Data Infile of MySQL in SQL Server 2005?
in mysql we can direclty load file with Load Data infile query.
my question is how to do this in sql server 2005?
thanks.
HI All,
I want to pull data from mysql dbms to sql servr 2005, i have wrote the following codes but it takes more than an hour and half which is not visible. Thus is there any consideration to consider and reduced time it takes. For your information i am going to use SSIS packags, there is no any tranformation, it is direct dump.
Here is the code i am using,
SELECT *
FROM
OPENQUERY (Server_1,'
SELECT
t3.Column11 as Column1,
Column12 as Column2,
Column13 as Column3,
Column14 as Column4,
Column15 as Column5,
Column16 as Column6,
Column17 as Column7,
Column18/1000 as Column8
FROM
table1 t1
INNER JOIN
table2 t2
ON t1.ColumnId = t2.columnID
INNER JOIN
Table3 t3
ON t2.columnId = t3.columnID
WHERE t1.Column4 > Sometime ')
I need to periodically import a (HUGE) table of data from an external data source (not SQL Server) into SQL Server, with the following scenarios:
Some of the records in the external data source may not exist in SQL.Some of the records in the external data source may have a different value at different imports, but this records are identified univocally by the same primary key in the external datasource and in SQL Server.Some of the records in the external data source may be the same in SQL.
Due to the massive volume of the import, I would like to import only the records which are different from what I have in SQL Server (cases 1 and 2 above). In fact case 2 is the most critical.
I thought of making a query with a left outer join between the data in the external data source table (SOURCE) and the data in the SQL Server table (DESTIN). The join is done on the respective primary keys (composed keys of up to 10 columns) and one of the WHERE conditions will be that the value in SOURCE is different from the value in DESTIN.
The result of this query would be exactly what I need to import.
How to do this in SSIS??? I couldn't figure out how to join tables in different data sources yet.
In fact I cannot write a stored procedure to do that, since one of the sources is in a datasources not SQL Server.
I have seen the Lookup transformation in this article http://www.sqlis.com/default.aspx?311 but this is not exacltly what I want to do.
Another possibility is to use the merge join, but due to the sorting I believe its performances would be terrible!
Thanks in advance for your suggestions!
Hi all,
It looks like these options are only available in the SQL Server Management Studio? I installed SQL Server Management Express Studio and I can't even find the DTSWizard.exe on my machine.
Can you please help how I can import data from excel or where can I download the SQL Server Management Studio?
Your prompt response is greatly appreciated.
Thanks!!
Tram
I have one column in SQL Server 2005 of data type VARCHAR(4000).
I have imported sql Server 2005 database data into one mdb file.After importing a data into the mdb file, above column
data type converted into the memo type in the Access database.
now when I am trying to import a data from this MS Access File(db1.mdb) into the another SQL Server 2005 database, got the error of Unicode Converting a memo data type conversion in Export/Import data wizard.
Could you please let me know what is the reason?
I know that memo data type does not supported into the SQl Server 2005.
I am with SQL Server 2005 Standard Edition with SP2.
Please help me to understans this issue correctly?
I have an internal Project Management and Scheduling app that I wrote internally for my company. It was written to use MySQL running on a Debian server, but I am going to move it to SQL Server 2000 and integrate it with our Accounting software. The part I am having trouble with is the user login portion. I previously used this:
PHP Code:
$sql = "SELECT * FROM users WHERE username = "$username" AND user_password = password("$password")";
Apparently the password() function is not available when accessing SQL Server via ODBC. Is there an equivalent function I could use isntead so the passwords arent plaintext in the database? I only have 15 people using the system so a blank pwd reset wouldn't be too much trouble.
Hi guys,
I am looking to import data into the SQL Server database, from a CSV file..
anyone with any suggestions for how to start with it ??
Thanks heaps
Im using the sql import/export features to transfer a database from one server to another. For some reason when I am transfering tables with primary keys when I look at the new database on the other server it doesnt seem to hold the primary key info. Can anyone tell me why and how i can preserve this info so I dont have to go back through and reset this info.
thanks
Hello everyone,
I need help with a situation that iam facing right now.
Here is the problem:
I have a tab limited or comma delimited CSV file. I want to read the contents of that CSV file and import it in one of the tables in the database.
id firstname lastname
-- ---------- ----------
"1" "John" "Smith"
"2" "Louis" "Garcia"
I assume that the columns in the CSV files and the table in the database match the datatype.
What would be a good approach to do it ? If anyone have a code that does the job, please post it.
Thank You.
Hi,i have developed an web-enabled student database application, where in i'll put all the details of the students from different universities.while uploading the details of the students, i wanna just import the data given by the universities into the server.I dont know how exactly the same could be done, also, since each university might be having there own format for the data, how can i import these into singe database?Any ideas ... Please. Thanks in advance
View 3 Replies View RelatedHi,
I am having my present database system in DB2. Recently, I have transferred to SQL Server 6.5 and have created a database there.
I want to import all my data from dbase to SQL Server 6.5.
I have created a CSV file from the dbase database.
How can I import this data into a table in SQL Server 6.5 ??
I can't find any DTS component in SQL 6.5 like we have in SQL 7.0 and 2000.
Thanks.
Does anyone know how to import data from an Oracle view (on Unix machine) to the tables in NT/SQL server 7.0? At least point me to the right docoment resource, if available. Thanks a lot.
wendy
I have created some DB tables on SQL Server. Now I want to import some data from Access using Data Transformation Services.
The APPLICATION table I have created has the following columns:
AppID, AppName, AppMnem, GripsID, Decommissioned, Last Modified, Modified By
AppID is the primary key and is an identity column with an autoincrement on insert.
The query I used to import the data from Access is:
select `T>Application>General`.`Application Name`, `T>Application>General`.`Application Mnem`, `T>Application>General`.`GripsID`, `T>Application>General`.`Decommissioned`, `T>Application>General`.`Last Modified`, `T>Application>General`.`Modified By`
from `T>Application>General`
where `T>Application>General`.`Application Mnem`='TMS'
order by `T>Application>General`.`Application Mnem`
The transformation I used is:
'************************************************* *********************
' Visual Basic Transformation Script
' Copy each source column to the
' destination column
'************************************************* ***********************
Function Main()
DTSDestination("AppName") = DTSSource("Application Name")
DTSDestination("AppMnem") = DTSSource("Application Mnem")
DTSDestination("GripsID") = DTSSource("GripsID")
DTSDestination("Decommissioned") = DTSSource("Decommissioned")
DTSDestination("Last Modified") = DTSSource("Last Modified")
DTSDestination("Modified By") = DTSSource("Modified By")
Main = DTSTransformStat_OK
End Function
However, I keep gettting the following error:
Error at destination for row number 1. Errors encountered so far in this task: 1.
Instert error, column 1 ('AppID', DBTYPE_I4), status 10: Integrity violation; attempt to insert null data or data which violates constraints.
Unspecified Error
Any ideas as to what the problem is?
Thank in advance
Hi I have a database in DB2 and i would like to import this data into sql server 2000. How can i do that?
Thanks.