Importing Dtsx In SQL Server
May 22, 2008
I created a dtsx with my user account and when I had imported it in SQL server
I get the following error when trying to execute:
Executed as user TESTGISSYSTEM Failed to decrypt protected XML node, Key not vallid for use in specified state.
Even when I remove the password for the dtsx I still get the same error.
I saw the reply's on this
Re: DTSX package will not run from SQL server agent
Thread Starter: jschroeder Started: 13 Aug 2007 10:08 PM Replies: 2
but it was no solution for my problem.
Thx
View 4 Replies
ADVERTISEMENT
Aug 15, 2007
Ok, I'm actually adding a SSIS job to my job agent on my test SQL server. Noticed that when I go to my job agent --> add new job, under the steps option, I click new. this then takes me to the new job step window. When I select
Type as SQL Server Integrated Services, I then see some new tabs at the bottom of the form. Under package source I can select File System, SQL Server, or SSIS Package Store, then I have to select the location of the dtsx file.
So my question is, since I can select the actual file (package) I want to run from here, do I really have to import a package to the file system or MSDB under the SQL Integration Services on the server?
It appears to me that its kind of the same thing.
I'm new to this SSIS, SQL DB work, so I'm learning as I go. . . .
View 1 Replies
View Related
Jun 13, 2007
I have a dtsx package that is calling another dtsx package, however, if the called upon dtsx package fails with errors or what not, then the calling package does not continue as well. Is there any way to override this such that if the called upon package fails, the downstream actions in that package can stop, but the calling packages downstream actions to continue?
View 3 Replies
View Related
Aug 13, 2007
When I try to run a DTSX package from SQL server agent, I get this error message:
Started: 3:59:42 PM Error: 2007-08-13 15:59:42.39 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTSroperty" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2007-08-13 16:00:00.98 Code: 0xC001602A Source: CFASerialNoExport Connection manager "FTP Connection Manager" Description: An error occurred in the requested FTP operation. Detailed error description: The password was not allowed . End Error Error: 2007-08-13 16:00:00.98 Code: 0xC002918F Source: FTP Task FTP Task Description: Unable to connect to FTP server using "FTP Connection Manager". End Error DTExec: The packag... The package execution fa... The step failed.
All my other packages run fine. This one contains an FTP task and will not run, although it will run if I execute it through the visual studio.
View 3 Replies
View Related
Aug 31, 2007
I get the following error:
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "'I:MyFolderMyRptsMyApplicationMyDatabase.mdb' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.".
The above path "I:...." is mapped on the server that SQL Server is running on.
This package runs with NO problems in MS Visual Studio.
View 1 Replies
View Related
Aug 6, 2007
What is the best way to move a SSIS solution to a new server so that I can edit the solution when I have problems?
Thanks,
View 5 Replies
View Related
Jan 10, 2007
Hello.
I have two servers, A for dev and B for production.
On server A I developed a project containing a SSIS package using SQL Server business intelligence development studio. The package runs fine from the BIDS and also when I save it to SQLServer itself and run it as a scheduled job using the SQLServer Agent.
All ready to roll out to Server B I thought, so I then saved the .dtsx file to a shared network drive.
On Server B, I created a empty project with the same name as it had on Server A. I then imported the .dtsx file into the project using project > add existing item.
The package appeared to import ok but I now cannot execute any of the data flow tasks in isolation. If I right click on them, there is no option to 'execute task' as there should be, it is not greyed out, it's not there at all.
Also, if I attempt to debug the whole package I get a message saying 'This document is opened by another project'.
Can anyone help with this as my deployment to live isn't going very well to say the least!
Both server A + B are 32-bit 2005 std edition SP1 on W2003 Server std edition SP1.
Thanks.
View 3 Replies
View Related
Jun 17, 2008
Hi people.
I just run a new instance of a SQL 2005 64x in my network.
For now all is working right. I have only one problem.
I create a procedure for BI that use DTSX.
Sometime if i try to use from Integration services, these job start and immediatly stop without no error.
Someone can help me ?
thank you in advance.
View 3 Replies
View Related
Jan 15, 2007
Hi all,
i have creatd a dtsx packages, i need to script on that packages.
is it possible to get a script on that corresponding packages..?
Can any one able to help me..?
Thanks
krishnakumar.C
View 3 Replies
View Related
Dec 27, 2007
I have been trying in vain to get a DTSX to return to a vb.net application that it has failed, all i get back is a
ReturnResult = success.
In the dtsx is the following;
Secquence
- Transaction Option set to Required
- FailParentonFaluire set to True
- FailPackageonFaluire set to True
- MaximumErrorCount set to 0
Inside the sequence Container
DataFlowTask
- Transaction Option set to Required
- FailParentonFaluire set to True
- FailPackageonFaluire set to True
- MaximumErrorCount set to 0
ExecuteSQLTask
- Transaction Option set to Required
- FailParentonFaluire set to True
- FailPackageonFaluire set to True
- MaximumErrorCount set to 0
I have run the package from my vb.net application and it runs fine, importing data from a file. I tried running it with a bogus file name that doesnt exsist and it still returned a ReturnResult = success. I need it to return a failed result on any errors, which is what i thought it would do as i have it sey to fail the package on errors throughout each task ... am i missing something ?
View 3 Replies
View Related
Nov 9, 2006
I am having more luck editing the dtsx files directly than using configs. Also for documentation purposes this would be helpful as I don't know enough about xml to find or build a tool to create a style sheet for me.
Thanks!
Ken
View 3 Replies
View Related
Aug 9, 2006
Hi everyone,
After a while I'm come back to SSIS but a drawback appears.
I€™ve copied from our server a folder which contains a few dtsx on my local folder and when I€™m going to open dtproj and then choose any of them:
Error 1 Error loading 'M_Hac_Modelo187.dtsx' : Error al recuperar un generador de clases COM para el componente con CLSID {E80FE1DB-D1AA-4D6B-BA7E-040D424A925C} debido al siguiente error: 8000401a.. c:ssishacienda_anualM_Hac_Modelo187.dtsx 1 1
..
..
..
(I think that is not necessary to translate into english due to simpleness of the message.)
What the hell is happening? I perfectly remember have been doing the same a month ago and I was able to open them without problems.
TIA
View 2 Replies
View Related
Dec 8, 2006
Hi!
I have a SSIS-package with Excel Connection Manager that fails on our x64-platform with error:
Error: 2006-12-08 06:46:23.77
Code: 0xC0202009
Source: dpd2_philips Connection manager "Excel Connection Manager"
Description: An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2006-12-08 06:46:23.77
Code: 0xC020801C
Source: Copy Data from Blad1$ to dpd2 dbo philips Task Excel Source [107]
Description: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
End Error
It's works fine on my computer (x86) and if I start the package manually on the x64-server. But I noticed that it runs under 32bit (DTExecUI.exe *32 in taskmanager) when it's started manually.
Any idea? The server use dtexec.exe to start the packages. Maybe it runs under 64bit then?
View 4 Replies
View Related
Jul 30, 2007
Hi,
I am using Windows 2003 server and Sqlserver 2005 by the use of Linked server , I made a connection to Oracle 10g after that I am importing records from Oracle to sqlserver 2005. When I made tnsnames.ora in sql machine , it worked fine but when i am using tnsnames file from oracle server then i fiired importing procedure it returns below maintain error :
OLE DB provider "MSDAORA" for linked server "BI_ORACLE_LS" returned message "Unspecified error".
OLE DB provider "MSDAORA" for linked server "BI_ORACLE_LS" returned message "Oracle error occurred, but error message could not be retrieved from Oracle.".
Msg 7311, Level 16, State 2, Line 1
Cannot obtain the schema rowset "DBSCHEMA_TABLES" for OLE DB provider "MSDAORA" for linked server "BI_ORACLE_LS". The provider supports the interface, but returns a failure code when it is used.
Please let me know.
Thanks
View 15 Replies
View Related
Dec 29, 2004
I have a problem with SQL Server 2000. I have a rather large database (3 gigs). I have the recovery mode set to bulk-logged because I'm importing 300,000+ records (through Acccess (linked tables) due to several importing checks which need to be done which SQL Server DTS can't handle.) The problem is that my Transaction log keeps growing very large after each import. I've tried several different settings in SQL Server but I don't want to slow down the import process which runs through a rather intensive checking process. The problem is that the Transaction log keeps growing and will only shrink after nightly backups.
I've tried shrinking the database after 1 of the imports (which causes the Transaction log to grow to 400+ megs) and can't get it to shrink no matter how I do it (even tried using Backup Log Rebates WITH Truncate_Only as well as the All Tasks - Shrink Database.)
I also tried setting the Transaction log to 400 megs and not allowing it to grow.
What's the best way to do this with the settings in SQL Server? I still need to use Access to do the checks (a stored procedure/DTS won't work with all the checking needing to be done on each import.)
View 3 Replies
View Related
Jan 19, 2007
Hello,
I am attempting to import a database from one server (2000) into another one (2005). I have tried a variety of methods to do so, but each seems to have at least one hiccup. The biggest frustration is that, depending upon how I setup the tables prior to import, one of two things ends up kicking me in the rear:
1) I leave the IDENTITY cols set as such, and even though I enable identity insert in the wizard (SQL Server 2005 Management Studio), they end up just incrementing starting at 1 as though it was fresh data. Obviously, once I apply the PKs and FKs, everything falls to pieces.
2) I initialize the identity cols as INT, and the data imports just fine. However, when I try to add the IDENTITY to the cols, it tells me to go screw myself. Actually, it just throws a syntax error. Here is the statement that I'm attempting:
ALTER TABLE myTable
ALTER COLUMN myCol IDENTITY
GO
I have also tried
ALTER TABLE myTable
ALTER COLUMN myCol INT IDENTITY
GO
I'm pulling my hair out with this one. It's played a rather significant role in me getting only 2 hours of sleep in the last 40+ hours. I really try not to post questions without exhausting myself trying to figure out the answer, or to find it with research (which is part of figuring it out). I am a moderator on EasyCFM.com's ColdFusion forums (mquack is the screenname), so I know how annoying it is when people don't put forth any effort on their own. Hopefully I don't come across here as being "one of them".
Any help or guidance to the *right* sources would be very much appreciated.
Thanks in advance. :-)
View 3 Replies
View Related
Jul 23, 2005
Hello,I need to set up a development platform at home with a copyof a DB from a SQL server at a friend's company.So far, all my attempts at backup/restore or export/importhave failed despite my reading all the documentation Icould find (I am a newbie).Using DTS/Export wizard, I tried to export the DB first to aplain text file, then to an excells file. After having gonethrough all the screens, the export script runs. Itexported all the data for close to one hour, but at the endI only get a 0kb empty text file, or 5kb empty excellsfile.Is there a feature on SQL server preventing export (such asfor security reasons)? Then why would the export wizard runfor so long, just to output nothing?Since it's only for developement, I don't need the latestdata yet, so I burned on CD the .bak backup filespreviously made, but I couldn't import nor restore them onthe other machine. Depending on what I tried, I had variouserror messages, like* an improper login and password (which should this be: thatof the owner of the DB on the source SQL server, or that ofthe SQL admin or windows admin on the target server?),* an error saying that the backup doesn't belong to theempty DB I try to restore to...* I even managed to import a mydbname.bak.dns file with theDTS wizard (apparently it was a backup of an Access DB, notthe SQL Server DB I need), but the import script runsapparently smoothly for a while, but then the target DBdidn't contain any of the imported tables, only the systables.For the last several weeks, I have tried everything I couldthink of, read the docs, but still I am at a loss as to howto import or make a copy on my system of the BD from theoffice.What would be the proper procedure to import/restore thecopies of the backup I have burnt on CD into my freshinstall of W2000/SP1 + SQL Server 2000?Failing that, I can go back to my friend's office and tryagain to export the data, but how do I make sure I don'tend up with an empty file?thank you,Anguo.--http://www.masquilier.org/Condorcet, Approval alternative, better voting methods.http://www.gnosis-usa.com/Revolutionary Psychology, White Tantrism, Dream Yoga...http://www.reuniting.info/Intimate Relationships, peace and harmony in the couple.
View 3 Replies
View Related
Jul 23, 2007
I have spent the last couple of weeks going through about 15-20 different examples/tutorials on running DTS packages from inside a C# Windows app (and even asp.net). I must have a mental block, because I can't seem to make it click in my head. I have hundreds of DTS packages saved as .dtsx files. I can double click on them and run them perfectly. What I need to do is be able to run them conditionally from inside a windows app. Could anyone point me to a tutorial or example that could help me with this? I've even looked at some VB source to see if I could work it out, but I keep running up against a wall. I'd appreciate any help anyone can provide.
View 1 Replies
View Related
Jun 24, 2008
Hello,
Please, help me.. I'm trying to execute a packge.dtsx that be save in folder. How can i do, to execute it? I create a job, but always give me errors..
View 9 Replies
View Related
Aug 1, 2007
I have some familiarity with DTS packages, and find them easy ( generally) to debug as you can run them step by step and simply find the offending step. when they fail they also put a message box with the error in the centre of the screen. My system has recently been updated and now uses DTSX packages. I can open and veiw these in visual studio, but i cannot run them one step at a time, and they dont give a nice error message when they fail. how do you debug a DTSX package, or at least make debugging it a little easier?
View 7 Replies
View Related
May 23, 2006
Hi Champs
I want to implement a rutine that watches for specific files in a specified folder.
I've found the WMI sample "File Watcher Task" for SSIS and it looks fine.
My question is now: how shall I run this package; shall I start it at let it run forever?
And also how do I monitor that the package is running?
Many thanks
Rogvi
View 2 Replies
View Related
Aug 30, 2006
I can create and edit DTSX packages in Visual Studio 2005, but I can't execute them because the start button is grayed out. Can someone help?
I am able to run them using the execution utility, but that's a hassle.
Kathy
View 1 Replies
View Related
Dec 14, 2007
Hi,
I want to take the backup of all SSIS packages deployed in the SQL server. I need the backup in DTSX format, how should i do that. Please advice.
View 8 Replies
View Related
Feb 8, 2006
Hi,
When I execute the RSExecutionLog_Update.dtsx, I get an error saying "The task "Set Time period" cannot run on this edition of Integration Services. It requires higher level edition". I am using the Proffesional Edition of SQL2005 and the Integration Services Version is 9.00.1399.00. I have configured the target database RSExecutionLog correctly. Wat could be the problem?
TIA
View 4 Replies
View Related
Oct 19, 2007
I understand that I can use dtutil to provide a password to encrypt the package. However, when I run the encrypted package, I need to provide the same password in order to run it. Is there a way that I can encrypt the package but allow anybody to run it without providing the password?
That is, I want the package to be encrypted so that nobody can load and modify the code in Visual Studio, but I want people to be able to execute it. Is there a way to do this? Similar to generating a exe file?
View 7 Replies
View Related
Feb 15, 2006
Hi all
This is the situation: I've a dtsx package wich creates a tab delimited txt file from a sql server 2005 databasetable. Now this all works just fine. But what I want to do is that the user can choose the destination path of that created txt-file. Right now I've declared the path when I created the flat file source.
On the net I found that a config file for a dts package (sql server 2000 - Dynamic Property Task) could do the trick...
Any help plz?
thx!
View 1 Replies
View Related
Mar 28, 2007
Dear all,
SSIS package created from the wizard couldn't be run from the visual studio editor? The run button is disabled. Is it not possible to run from inside editor as well?
Many thanks,
milan
View 3 Replies
View Related
Aug 16, 2006
Hi everyone,
I'm stuck with this silly thing but I haven't idea how to obtain the path for the log file specified in a SSIS package programatically.
This snippet of code works fine:
Dim pkg As New Microsoft.SqlServer.Dts.Runtime.Package
Dim app As New Microsoft.SqlServer.Dts.Runtime.Application
Dim pkgResults As DTSExecResult
pkgLocation = "C:Documents and Settings40990880Mis documentosVisual Studio 2005ProjectsProyecto de SSIS3Proyecto de SSIS3ProvaPrimera.dtsx"
pkg = app.LoadPackage(pkgLocation, Nothing)
pkgResults = pkg.Execute()
After execution I'd like to see the log file which is allocated in the same place than DTSX file. But how??
Using pkg.LogProviders.Item(0).Name appears description reference "SSIS log provider for Text files1" but no the name of the file or its path
Thanks in advance for any thought or advice,
View 6 Replies
View Related
Nov 2, 2006
Hi there,
Just wanted to ask is it possible to 'restore' a SQL Server 2005 backup file into SQL Server 2000.
What I mean is that we are being supplied with a SQL Server 2005 backup file, but we currently use 2000? Can we use this or do we need to upgrade etc?
Thanks.
Simon Jefferies
View 3 Replies
View Related
Jul 22, 2004
Can someone please help me.
I need to import a csv fiel to sql server and I know that the column delimiter is
and the newline delimiter is but I don't know what the rowterminator is or the fieldterminator. How can I import the file into an empty table in an existing database.
Any suggestions would be greatly appreciated.
View 1 Replies
View Related
Jun 27, 2005
Dear AllI am trying to import data from excel sheet to sql server database, by using method 2, it creates a table on fly but it never shows any table in database tables' list but when i execute the code again, system throws an exception that table already exists.On the other hand method two assumes that there is an existing table in db, but after execution, it never shows data, table remains empty. Here is code, please tell me whats wrong with this code.Regards<code>Dim ExcelConnection As New System.Data.OleDb.OleDbConnection ("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:\annieanna.xls;Extended Properties=Excel 8.0;")ExcelConnection.Open()'For existing Table.................METHOD 1Dim ExcelCommand As New System.Data.OleDb.OleDbCommand("INSERT INTO [User ID=sa;Data Source=CBS101;Initial Catalog=IIETesting;Provider=SQLOLEDB.1;Workstation ID=CBS003].[anna] SELECT * FROM [Sheet1$];", ExcelConnection)
'For new Table......................METHOD 2Dim ExcelCommand As New System.Data.OleDb.OleDbCommand("SELECT * INTO [User ID=sa;Data Source=CBS101;Initial Catalog=IIETesting;Provider=SQLOLEDB.1;Workstation ID=CBS003].[anna] FROM [Sheet1$];", ExcelConnection)ExcelCommand.ExecuteNonQuery()ExcelConnection.Close()</code>
View 3 Replies
View Related
Apr 23, 2006
I need to import a large textfile into sql server 2005.Some of the text fields contain special characters...like:
Île-de-Francewhen I import a text like this into SQL Server I get:ÃŽle-de-FranceWhat can I do to prevent this from happening? (other fieldtype?)
View 3 Replies
View Related
May 16, 2002
I am trying to import records form ACT! to an SQL Server Database. I can import all the records except for the linked tables (notes/ history, etc.) any thoughts on this would be greatly appreciated!!!!!!!!!
View 1 Replies
View Related
