Hello all, I'm creating a stored procedure in SQL Server 2000. I'm trying to count how many rows match a certain WHERE clause, and assigning this integer to a variable:
----------------
DECLARE @RowCount int,
SELECT COUNT(*) FROM Customers WHERE FirstName='Joe'
----------------
How can I assign the count that returns from the SELECT statement to the @RowCount?
Thanks
I have an Execute SQL Task that executes "select count(*) as Row_Count from xyztable" from an Oracle Server. I'm trying to assign the result to a variable. However when I try to execute I get an error:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "RowCount": "Unsupported data type on result set binding Row_Count.".
Which data type should I use for the variable, RowCount? I've tried Int16, Int32, Int64.
Thanks!
The following works in query if I specify one student (PlanDetailUID) when running query. If I try to specify multiple students (PlanDetailUID) when running query, I get variable cannot take multiple entries. I assume I would need to replace (variables) in PART 2 with (case statements / using select everywhere) to get around the issue or is there a better way ?
CREATE TABLE #AWP (
[TransDate] [datetime] NULL,
[Description] [varchar](1000) NULL,
[Amount] [float] NULL,
[TotalDueNow] [float] NULL,
[code]....
Consider the following:
Sub regUser(s as Object, e as EventArgs)
If IsValid Then
Dim stuTable as String
Dim connStr as String
stuTable = "mytable"
connStr = "myConnectionInfo"
'check to see that student num is in the db
Dim connect as SqlConnection
Dim strSelect as String
Dim cmdSelect as SqlCommand
Dim strDbResult as SqlDataReader
connect = New SqlConnection(connStr)
strSelect = "SELECT stu_num, stu_fname, stu_lname FROM " + stuTable + " WHERE stu_num=@stuNum"
cmdSelect = New SqlCommand(strSelect,connect)
cmdSelect.Parameters.Add("@stuNum", txtStdNum.text)
connect.Open()
strDbResult = cmdSelect.ExecuteReader()
Dim stuFName as String
Dim stuLName as String
Dim stuEmail as String
Dim strRandom as String
Dim strPassword as String
Dim i as Integer
Dim charIndex as String
Dim stuMailMessage as MailMessage
Dim strHTMLBody as String
'declare stuFname, stuLname, stuEmail
stuFName = strDbResult("stu_fname")
stuLName = strDbResult("stu_lname")
stuEmail = txtStdEmail.text
'more code follows ....
In my DB I have a table with the columns stu_num, stu_fname and stu_lname. Each of these columns contains rows with data. However, the proceeding code gives me this error: Invalid attempt to read when no data is present (line 58 --> stuFName = strDbResult("stu_fname") ).
What am I doing wrong here? How do I assign the stu_fname in the DB to the page level variable stuFName?
As a little aside how do I say "If no record was found matching stuNum Then" ... ??
Sorry, I'm a .NET beginner ...
Hi,
Is it possible to assign the column value to a user defined variable?
Hi ,
I have a typical scenario here where I am trying to assign a variable a value using another variable, for that I am using two execute SQL task , the fisrt one assigns the first variable a value and then the second one uses the first variable to evaluate and then assigns a value to another variable. The first execute sql task works fine , however the second one fails with the following error
"failed with the following error: "An error occurred while extracting the result into a variable of type (DBTYPE_I4)". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. "
Here is the query I am using to assign the value in my second execute sql task
select (CASE
WHEN Sum(col1) <> 0 AND ? = 'M' THEN 'M'
WHEN Sum(col2) <> 0 AND ? >= 'T' THEN 'T'
WHEN Sum(col3) <> 0 AND ? >= 'R' THEN 'R'
ELSE 'S'
END) as Current
FROM dbo.TABLE1
I am passing the variable by mapping the parameters and then assigning the value using a single row result set.
Can someone please tell me where am I going wrong?
Thanks
i am trying on this but hit error
Declare @var int
Set @var = select max(value) from xxx
anyone can help me?
Hi I'm new to SQL and I'm trying to build a store procedure. What I'm trying to find out is how to assign a variable a value from a table.
So, I declare a variable:
DECLARE @variable int
Then I want to assign a single int value to that variable that is already in a table. For instance the id value from a single row in a table.
I've tried SELECT INTO and SET, but nothing has worked so far and I'm lost after searching for a few hours.
Thanks in advance for any help
Hi,
I would like to assign the value of a variable to a column name of a table. For eg:
declare @sam varchar(100)
set @sam = 'Insert'
create table #temp(Sample varchar(100) not null)
insert into #temp(Sample) Values(@sam)
drop table #temp
I would like to generate a table whose column name should be generated dynamically. The value of @sam that is "Insert "should be set to the column name. Is there a way to assign like this. Can anyone please help me in achieving this.
Thanks,
Sana.
Hi,
1 20031012121212 200 (recordtype, CreationDateTime(YYYYMMDDHHMISS), Rec_Count) -- Header records
2 ABCD, XYZ, 9999, 999999999, 1234 ---- Detailed Record
2 ABCD, XYZ, 9999, 999999999, 1234 ---- Detailed Record
For the above given sample data I am having two outputs at Condition Split (based on the recordtype). I want to store the 1st record datetime value into a variable and then I want to use that variable value into 2nd and 3rd row.
Basically, detailed records would be stored into the database not the header record. Is there any way I can use the variable while doing processing for 2nd and 3rd records.
Please suggest me.
Regards,
Hello all,
for a project I am trying to implement PayPal processing for orders
public void CheckOut(Object s, EventArgs e) { String cartBusiness = "0413086@chester.ac.uk"; String cartProduct; int cartQuantity = 1; Decimal cartCost; int itemNumber = 1; SqlConnection objConn3; SqlCommand objCmd3; SqlDataReader objRdr3; objConn3 = new SqlConnection(System.Web.Configuration.WebConfigurationManager.ConnectionStrings["ConnectionString"].ConnectionString); objCmd3 = new SqlCommand("SELECT * FROM catalogue WHERE ID=" + Request.QueryString["id"], objConn3); objConn3.Open(); objRdr3 = objCmd3.ExecuteReader(); cartProduct = "Cheese"; cartCost = 1; objRdr3.Close(); objConn3.Close(); cartBusiness = Server.UrlEncode(cartBusiness); String strPayPal = "https://www.paypal.com/cgi-bin/webscr?cmd=_cart&upload=1&business=" + cartBusiness; strPayPal += "&item_name_" + itemNumber + "=" + cartProduct; strPayPal += "&item_number_" + itemNumber + "=" + cartQuantity; strPayPal += "&amount_" + itemNumber + "=" + Decimal.Round(cartCost); Response.Redirect(strPayPal);
Here is my current code. I have manually selected cartProduct = "Cheese" and cartCost = 1, however I would like these variables to be site by data from the query.
So I want cartProduct = Title and cartCost = Price from the SQL query.
How do I do this?
Thanks
Hi all,
I need some help regarding a conversion in a Script Task.
I am reading my variable values from a database with a sql task, the table has two columns, variable and variableValue.
Looping through the recordset and setting the different variables works well, with two links:
http://blogs.conchango.com/jamiethomson/archive/2005/02/09/SSIS_3A00_-Writing-to-a-variable-from-a-script-task.aspx
http://sqlblog.com/blogs/andy_leonard/archive/2007/10/14/ssis-design-pattern-read-a-dataset-from-variable-in-a-script-task.aspx
setting the variable value only works well if the package variable is defined as string, because the db field is a varchar, trying to assign an integer for example brings up an error.
Therefor I tried something like CType:
Dts.Variables("MyVar").Value = CType(MyRecordsetField,String), where the target datatype should be depending on the variable datatype instead of being assigned as a constant.
Could someone give me a hint to handle this?
Thanks in advice!
Cheers
Markus
Hi all!!!
I have a smalldatetime field in a table that holds dates as 3/1/2008. If you run a select query on the field it will bring back the date as a datetime vairable. I reran the query using the following:
select convert(varchar,cast((max(ENTRY_DTE))as datetime),101)
This query brings me back the date as 03/01/2008.
When I utilize the same query and set the value to a declared variable, defined as datetime, it brings me back the date as : Mar 01 2008 12:00AM
I have tried several different ways to convert the date however as soon as appoint it to a declared variable I receive the same result!!
PLEASE HELP!!
I am getting wrong output when assigning a datepart function to a variable. I should get 2006 but instead I get an output 1905.
Below is the code and output. Any help will be greatly appreciated. Thanks
DECLARE @FiscalStartCurrYear datetime
SET @FiscalStartCurrentYear = DATEPART(year, GETDATE())
select @FiscalStartCurrYear
Output
-----------
1905-06-30 00:00:00.0000
Hello,
I've asked this question before and I've read the answers before and I still cannot get it to work. My task is simple, I want to use the execute sql task container to grab a value from a database and put it in a variable. I've done all the preliminary stuff such as running profiler to make sure that the package is getting the call to the database, setting up the ResultSet to be "single row" in the general tab, mapped the Result Set correctly, but nothing works. I get the same error every time.
This is my sql command:
select output_location as output_location
from script_master
Result Set is set up like this:
Result Name: output_location ; Variable Name: User::output_location
Here is the error I get:
Error: 0xC002F309 at Execute SQL Task, Execute SQL Task: An error occurred while assigning a value to variable "output_location": "The type of the value being assigned to variable "User::output_location" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
".
I don't know what I'm doing wrong, I've followed all the instructions exactly on how to populate a variable in this container. My variable is set up as a string, if I change it to object I can get it to work. I think this is because the object is allowing nulls. I really believe that the variable is not populating and that is why I'm getting errors.
Please help. If you could provide step by step example's that would really make my day.
Thanks,
Phil
How to assign multiple values to emp1 variable separated by comma
Ex: If ajay karthik vijay are employee names in emp table
then emp1= ajay,karthik, vijay
set emp1= (select employeename from emp) returns error
error: subquery returns morethan one value
I'm using SSEE 9.0.3042 and started loosing sleep over trying to figure out why the following piece of SQL
DECLARE @x xml
DECLARE @a nvarchar(400);
DECLARE @b nvarchar(400);
DECLARE @c nvarchar(400);
SET @x=N'<SuchKriterienDataSet xmlns="http://tempuri.org/SuchKriterienDataSet.xsd">
<SuchKriterien><Index>0</Index><Name>a</Name><Wert>Test1</Wert><Bedingung>0</Bedingung></SuchKriterien>
<SuchKriterien><Index>1</Index><Name>b</Name><Wert>Test2</Wert><Bedingung>0</Bedingung></SuchKriterien>
<SuchKriterien><Index>2</Index><Name>c</Name><Wert>Test3</Wert><Bedingung>0</Bedingung></SuchKriterien>
</SuchKriterienDataSet>';
WITH XMLNAMESPACES ('http://tempuri.org/SuchKriterienDataSet.xsd' AS ds)
SELECT
@a=@x.value('(/dsuchKriterienDataSet/dsuchKriterien/ds:Wert[../ds:Name = "a"])[1]','nvarchar(400)'),
@b=@x.value('(/dsuchkriterienDataSet/dsuchkriterien/ds:Wert[../ds:Name = "b"])[1]','nvarchar(400)'),
@c=@x.value('(/dsuchKriterienDataSet/dsuchKriterien/ds:Wert[../ds:Name = "c"])[1]','nvarchar(400)');
WITH XMLNAMESPACES ('http://tempuri.org/SuchKriterienDataSet.xsd' AS ds)
SELECT
@x.value('(/dsuchKriterienDataSet/dsuchKriterien/ds:Wert[../ds:Name = "a"])[1]','nvarchar(400)'),
@x.value('(/dsuchKriterienDataSet/dsuchKriterien/ds:Wert[../ds:Name = "b"])[1]','nvarchar(400)'),
@x.value('(/dsuchKriterienDataSet/dsuchKriterien/ds:Wert[../ds:Name = "c"])[1]','nvarchar(400)')
UNION ALL
SELECT @a,@b,@c
returns
Test1 Test2 Test3
Test1 NULL Test3
instead of
Test1 Test2 Test3
Test1 Test2 Test3
This is the shortest repro I could assemble. Once you increase the number of variables, a random pattern of dropped values emerges.
I could repro on fully patched Windows XP German w/ SSEE ENU and Windows Server 2003 64-bit w/ SSEE GER.
Any workaround highly appreciated.
Thx,
Henry
Hey all!
Okay, can I assign line x of a flat file to a variable, parse that line, do my data transformations, and then move on to line x+1?
Any thoughts?
In other words, I'm looking at using a for loop to cycle through a flat file. I have the for loop set up, and the counter's iterating correctly. How do I point at a particular line in a flat file?
Thanks for any suggestions!
Jim Work
Hi,
I'm try to get the query second column value when it is assinged to a varchar variable.
Ex:In SP below is statement I wrote
SET @Values = (SELECT COL1,COL2 FROM TABLE)
Question 1: How to access the COL2 value from @Value2?
Question 2: How to access the other row values if above returns more than a row?
Please send me the solution as soon as possible.
Thanks-Vikash/Bala
In my SSIS package I am looping multiple flat file to load data into target table. I have used one variable to get that filename. I have error log table which used to log the invalid record which come from various files.
All are working fine , except I want to log the filename also in my error log table. How can we use the package variable to assign the variable value in script component.so that I can map the output column to target table. I have created Filename column in script component in output column tab.
In my Script Component properties I have included "ClientReportGroupId" as a ReadWrite variable. This variable is declared as a Package Variable.
View 23 Replies View RelatedI have a Data Flow Script Component(Destination Type) and in the properties I have a read/write variable called User::giRowCount
User::giRowCount is populated by a Row Count Component previously in the Data Flow.
After reading http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=97494&SiteID=1 it is very clear that you can actually only use variables in the PostExecute of a Data Flow Script Component or you will get an error
"Microsoft.SqlServer.Dts.Pipeline.ReadWriteVariablesNotAvailableException: The collection of variables locked for read and write access is not available outside of PostExecute."
What I need to do is actually create a file in the PreExecute and write the number of records = User::giRowCount as second line as part of the header, I also need to parse a read/write variable such as gsFilename to save me hardcoding the path
(Me.Variables.gsFilename.ToString),(Me.Variables.giRowCount.ToString)
-they must go in the PreExecute sub --workarounds please-here is the complete script component that creates a file with header, data and trailer --Is there any workaround
Thanks in advance Dave
Imports System
Imports System.Data
Imports System.Math
Imports System.IO
Imports System.Text
Imports System.Configuration
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Public Class ScriptMain
Inherits UserComponent
'Dim fs As FileStream
Dim fileName As String = "F:FilePickUpMyfilename.csv"
'Dim fileName = (Me.Variables.gsFilename.ToString)
Dim myFile As FileInfo = New FileInfo(fileName)
Dim sw As StreamWriter = myFile.CreateText
Dim sbRecord As StringBuilder = New StringBuilder
Public Overrides Sub PreExecute()
sbRecord.Append("RECORD_START").Append(vbNewLine)
End Sub
Public Overrides Sub ParsedInput_ProcessInputRow(ByVal Row As ParsedInputBuffer)
sbRecord.Append(Row.ProjectID.ToString)
sbRecord.Append(Row.TransactionRefNum.ToString)
sbRecord.Append(Row.BillToCustomerNum.ToString)
sbRecord.Append(Row.BillToAccountNum.ToString)
sbRecord.Append(Row.BillToLineNum.ToString)
sbRecord.Append(Row.BillToReassignmentNum.ToString)
sbRecord.Append(Row.ChargeCode.ToString)
sbRecord.Append(Row.NotificationMethod.ToString)
sbRecord.Append(Row.AdjustmentAmount.ToString)
sbRecord.Append(Row.AdjustmentDate.ToString)
sbRecord.Append(Row.ReparationGivenFlag)
sbRecord.Append(Row.BillingSystemProcessingErrorCode.ToString).Append(vbNewLine)
End Sub
Public Overrides Sub PostExecute()
sbRecord.Append("RECORD_COUNT").Append((vbTab))
sbRecord.Append(Me.Variables.giRowCount.ToString).Append(vbNewLine)
sbRecord.Append("RECORD_END").Append(vbNewLine)
'Now write to file before next record extract
sw.Write(sbRecord.ToString)
'Clear contents of String Builder
sbRecord.Remove(0, sbRecord.Length)
'Close file
sw.Close()
End Sub
End Class
Has anyone got a workaround
thanks in advance
Dave
hello
I have a problem with Sql task
when sql task tried to assing a value to my variable I have this error ""La valeur n'est pas comprise dans la plage attendue."
I'm using ODBC connexion for a csv file
someone can help me ?
thanks
hi chaps
i m getting the following ERROR:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "JDETimezone": "Unable to find column Timezone in the result set.".
i know what the problem is i.e. no row is returned then what is the problem
here you are.... i want to it work... strange... ok i explain...
actully i have some processign to do with variable JDETimezone even no row is returned.... can u tell me the alternative to do the follwing task...
I want to retrieve a record from some table and do some processing and if no row is present or returned then i want to do seperate processing.... can ne one help me out ?
regards,
Anas
I need to set a variable in a sp using a dynamic query as such:
declare @x1 varchar(50)
declare @x2 char(10)
DECLARE @SQLString VARCHAR(500)
set @x1 = (select DRfieldname from tblJournalType where journaltypeid = 2
set @SQLstring = 'select ' + @x1 + ' from tblAssettype where assettypeid = 10'
set @x2 = EXEC (@SQLstring)
The last line above is where I am getting the error. Is this possible to do this?
Thanks for any help
smHaig
I use SQL 2000
I have a Column named Bool , the value in this Column is 0�0�1�1�1
I no I can use Count() to count this column ,the result would be "5"
but what I need is "2" and "3" and then I will show "2" and "3" in my DataGrid
as the True is 2 and False is 3
the Query will have some limited by a Where Query.. but first i need to know .. how to have 2 result count
could it be done by Count()? please help.
thank you very much
Hello I have and tested in 2 way using variable and constant.
Query 1: This query I am using vaiable "@last" for the date value.
this takes to run for 2 minute .
Query 2: Here I am using value '11/05/2002' instead of varialbe and it is running within a second.
Why these much difference to run this same query?.
Can anybody give correct reason or solution for this.
Thanks,
Ravi
query 1:
DECLARE @last smalldatetime
SET @last ='11/05/2002'
select distinct(o.account_num),a.enterprise_num,a.site_nu m
from oesd.dbo.order_header o WITH(NOLOCK)
INNER JOIN oesd.dbo.account a WITH(NOLOCK)
ON a.account_num = o.account_num
and o.added_date > @last
UNION
select distinct(o.account_num),a.enterprise_num,a.site_nu m
from oesd.dbo.order_header o WITH(NOLOCK)
INNER JOIN oesd.dbo.account a WITH(NOLOCK)
ON a.account_num = o.account_num
INNER JOIN Leap.dbo.ENTERPRISE_STATE es WITH(NOLOCK)
ON (a.enterprise_num = es.ENTERPRISE_NUM
AND o.last_updated_date > @last)
Query 2:
select distinct(o.account_num),a.enterprise_num,a.site_nu m
from oesd.dbo.order_header o WITH(NOLOCK)
INNER JOIN oesd.dbo.account a WITH(NOLOCK)
ON a.account_num = o.account_num
and o.added_date > '11/05/2002'
UNION
select distinct(o.account_num),a.enterprise_num,a.site_nu m
from oesd.dbo.order_header o WITH(NOLOCK)
INNER JOIN oesd.dbo.account a WITH(NOLOCK)
ON a.account_num = o.account_num
INNER JOIN Leap.dbo.ENTERPRISE_STATE es WITH(NOLOCK)
ON (a.enterprise_num = es.ENTERPRISE_NUM
AND o.last_updated_date > '11/05/2002' )
Hi All,
I am looking to do the following:
1) Upload a text file via a website to a server with sql server 2000.
2) Fire a DTS package on that file so it appends the contents to a table in the database.
3) Choose a variable via a dropdown list on the website
4) Run a different DTS Package that uses an update sql statement that uses that Variable.
Any help or suggestions would be greatly appreciated.
Thanls,
Doug
For MS SQL so that I can do something like...
select * from myTable where #system_row_number = 5;
Hi All,
I need to store the row count from two different servers (one 6.5 and one 7.0)
to compare by doing this:(in T-SQL)
declare @kount1 int, @kount2 int
exec master..xp_cmdshell 'isql -Sserver65 -d dbA -T -Q "select count(*) from tableA",no_output
exec master..xp_cmdshell 'isql -Sserver70 -d dbA -T -Q "select count(*) from tableA",no_output
How can I save the rowcount in @kount1, @kount2 respectively for comparison?
Appreciate your feedback.
David Nguyen
I have duplicate records in table.I need to count duplicate records based upon Account number and count will be stored in a variable. I need to check whether count > 0 or not in stored procedure.I have used below query.
SELECT @_Stat_Count= count(*),L1.AcctNo,L1.ReceivedFileID from Legacy L1,Legacy L2,ReceivedFiles where L1.ReceivedFileID = ReceivedFiles.ReceivedFileID
and L1.AcctNo=L2.AcctNo group by L1.AcctNo,L1.ReceivedFileID having Count(*)> 0
IF (@_Stat_Count >0)
BEGIN
SELECT @Status = status_cd from status-table where status_id = 10
END
I have an aggregate transform that outputs two columns, a group by (DT_STR) and a count(column name) (DT_UI8). The results are put into a Recordset Destination. When I attempt to map these columns to variables in a Foreach Loop Container (using a Foreach ADO Enumerator), I get the error:
Error: 0xC001F009 at ExtractNNRPersonUpdates: The type of the value being assigned to variable "User::NNRPersonCount" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
Error: 0xC001C012 at Foreach Household Loop Container: ForEach Variable Mapping number 2 to variable "User::NNRPersonCount" cannot be applied.
The variable mentioned in the error message is setup as a UInt64. I've tried all other integer data types and nothing works. I also tried changing the data type of the count coming out of the Aggregate transform but received a warning stating this isn't possible.
Any idea what I may be doing wrong?
Hellois there a variable that is available to me that contains the numberof rows contained in a dataset return from a database call?
have a class that runs a stored proc and returns a dataset/resultsetlooking to simply assign an integer this value if it is possible
i'm using (learning) vb.net and sql server
thanks in advance