Hi,
I have a query that uses a parameter as criteria
e.g. type = :_type (i set p_type = 'Trad')
I want to change this parameter to be a range of values.
However when I change the query to be
type in (:_type) I get nothing returned if I set p_type to be 'Trad,New' but I do get something if it's just Trad.
Can anybody advise on the syntax? I've tried a number of variations.
Hi i'm trying to do this: SELECT Name, Address1 FROM Stores WHERE Name LIKE %@SearchText%"but it's not working. I assume my syntax is off?Thanks!
View 3 Replies View RelatedHi there,
I am trying to use and SQL statement with a LIKE query with % at the begining and end of the parameter to get any combination of the search parameter i.e. last name.
My piece of SQL looks like this:
WHERE userUsername=@Username AND contactName LIKE @SearchTerm
I need something like this:
WHERE userUsername=@Username AND contactName LIKE %@SearchTerm%
However this does not work.
Any suggestions would be greatly appreciaed.
Regards,
TCM_
Is it possible for an AND statement to take mulitple parameters? See below code:
SELECT tblQuestion.Question, tblAnswer.Answer
FROM (tblAnswer INNER JOIN tblQuestion ON tblAnswer.QuestionID = tblQuestion.ID)
WHERE (tblAnswer.StateID = ?) AND (tblAnswer.QuestionID = 14)
Is something like this possible?:
AND (tblAnswer.QuestionID = 14, 26)
Thanks
Hi,I'm trying to run a select statement that takes includes an if/elseclause. I need to select the 'tran_date' between....if the current month is greater than 10 i.e. after OCT then thetran_date will be between '01-Oct' - plus current year or thetran_date is '01-Oct' plus previous year.and the current dateHere is my script so far:SELECT a.resource_code ASSOCIATE, a.tran_date START_DATE,b.description PROJECT_CODE, sysdateFROM actrans a, acactivity b, dual cWHERE a.resource_type = 'E'AND a.acct_category = 'TIME'and a.activity like '9-WW-357852%'and b.activity = a.activityand tran_date betweenif to_char(sysdate, 'MM') > 10)begina.tran_date = '01-Oct' & to_char(sysdate, 'YY')endelsebegina.tran_date = '01-Oct' & to_char(sysdate, 'YY'- 1))EndORDER BY tran_dateCan anyone help me out with this? I need to run it as a job, but notsure whether I should be using a stored procedure etc..Thanks in advance.George
View 1 Replies View RelatedI am trying to pass a parameter to an sql statement that executes a stored proc. Here is my sql statement from the Execute SQL Task component.
USE [master]
GO
DECLARE @return_value int
EXEC @return_value = [dbo].[sp_sendSMTPmail]
@To = N'john.r.carter@bankofamerica.com',
@Subject = ?,
@Body = NULL,
@Importance = NULL,
@Cc = NULL,
@Bcc = NULL,
@Attachments = NULL,
@HTMLFormat = NULL,
@From = N'bpm@bankofamerica.com'
SELECT 'Return Value' = @return_value
GO
I have the ByPassPrepare set to True.
Can anyone tell me why I can't get this to work.
Thanks,
JC
Hi,
I try to pass a parameter to a IN statement in SSRS but couldn't get it work. It likes following sample:
select * from T1 where name IN (@nameList)
I passed @nameList like 'aa', 'bb', ''aa'', ''bb''(two single quotations), all didn't work. I couldn't even get it work on "Reporting -> Data" screen.
What is the right way to pass a parameter to IN statement in SSRS? I am using C# and SSRS2005.
Thanks!
I have a select statement that I am using and wanted to know if there is a way to remove a parameter on the fly. What I want to do is remove the @status if the text = "". so it will only search by the date and endate is that possible to do. Here is my code.
I have to specifiy the database name which is supplied from the user (@fixdb). I want to do something like the following 'code'
Declare SysCursor cursor for + 'select Name, ID from ' + @fixdb +'.dbo.sysobjects where xtype = "u"'
but I can't seem to come up with the right statement.
Any help greatly appreciated.
Thanks,
Judith
If you want to return a single value should I use OUTPUT or Scaler which one is more effiecient?
View 1 Replies View RelatedHi all,I was just wondering if it could be possible to excecute a statementwhich is extracted from variabele, Example:declare @SqlStatement varchar (100)set @SqlStatement = 'select * from company'the @SqlStatement contains the actual sql query, is it possible somehow to straight away convert it into excecution?I've tried:exec @SqlStatementbut exec or execute are meant to be for proceduresAny idea?
View 1 Replies View RelatedHi,I am trying to Pass Column Name(FieldName) using Parameter in SQLStatement... But i am getting error...how can i pass Column name using parameter???Example:in table i have fieldname ECountry...Select @FName='ECountry'Select @FName from Table...How it works???Thanx in Advance,Regards,Raghu...
View 5 Replies View RelatedHi!
Is it possible to call proc with parameter in openrowset?:
declare @str varchar(100);
select @str = 'EXEC SP_HELPTEXT ''createReport''';
select * from
OPENROWSET('SQLNCLI','Server=localhost;Trusted_Connection=yes;', @str)
AS a;
Incorrect syntax near '@str'.
------------------
select * from
OPENROWSET('SQLNCLI','Server=localhost;Trusted_Connection=yes;', 'EXEC
SP_HELPTEXT ''createReport''') AS a;
Msg 7357, Level 16, State 2, Line 1
Cannot process the object "EXEC SP_HELPTEXT 'createReport'". The OLE
DB provider "SQLNCLI" for linked server "(null)" indicates that either
the object has no columns or the current user does not have
permissions on that object.
Best regards
B. D. Jensen
Is there a way to set a default value for a sp parameter using a select statement(see code bellow)
ALTER PROCEDURE psGetInformationByProduct_Andrei
@col1 int,
SELECT @top = COUNT(col1) FROM Event
I am working on a Function that takes multiple parameters. I have a query that populates a temporary table, and then it processes some logic. My question is, if the parameter is passed as null, I dont want the query to be affected by this null value. Rather, I would like to not pass it at all to the query. So if the parameter is NULL, dont pass it through the query. I have the following but its not compiling right:
SELECT bom.pEngr_BOM_ID , bom.fEngr_Item_ID, det.pEngr_BOM_Detail_ID, 1, bom.Bill_Type, bom.Rev_Ltr, bom.Series_Ltr
FROM dbo.Engr_BOM_Control bom WITH (nolock)
INNER JOIN dbo.Engr_BOM_Detail det WITH (nolock)
ON det.fEngr_BOM_ID=bom.pEngr_BOM_ID
WHERE bom.pEngr_BOM_ID=@v_pEngr_BOM_ID
AND det.fEngr_BOM_ID=@v_pEngr_BOM_ID
CASE WHEN @v_Bill_Type IS NOT NULL THEN
AND bom.Bill_Type=@v_Bill_Type
END
In a 'Top n' type statement I wish to be able to insert the n valuefrom a parameter, within a stored precedure egHaving declared @pageSize as a parameter I want to run the followingtype of query :SELECT DISTINCT TOP @pageSize routeID, routeName FROMtblRoute_HeaderWhen I attempt to do so I get an error mesage indicating incorrectsyntax. I do not get an error message if I specify 'n' directly as inTOP 10Am I missing something or is this not possible within a storedprocedure?Best wishes, John Morgan
View 5 Replies View RelatedI am trying to calculate a measure based on parameter passed I have a liquidation rate of amount/facevalue when the dimension attribute is 'all' and i will like to the 'amount' to change based on the parameter passed and the 'facevalue' should not changed , i tried  with the code below.
What I noticed is when i add a calculated member to return the currentmember of the cell member
measures.strat
as
[Strategy].[ICS].CURRENTMEMBER.uniquename
it comes back asÂ
[Strategy].[ICS].[All]
even when I changed the default value for the parameter to another member like red
WITH
MEMBER
MEASURES.TEST
 ASÂ
((
CASEÂ
WHEN [Strategy].[ICS].CURRENTMEMBER.uniquename = '[Strategy].[ICS].[All]'
THEN
[Measures].[Measures].[AMOUNT]
[code]....
Hello, I'm needing to pass a variable length number of values to a select statement so I can populate a result list with items related to all the checkboxlist items that were selected by the user. for example, the user checks products x, y and z, then hits submit, and then they see a list of all the tests they need to run for each product. I found a UDF that parses a comma delimited string and puts the values into a table. I learned how to do this here: http://codebetter.com/blogs/darrell.norton/archive/2003/07/01/361.aspx I have a checkboxlist that I'm generating the string from, so the string could look like this: "1,3,4,5,7" etc.I added the function mentioned in the URL above to my database, and if I understand right, I should be able to pass the table it creates into the select statement like so:
WHERE (OrderStatus IN ((select value from dbo.fn_Split(@StatusList,','))) OR @StatusList IS NULL) but now I don't know how to assign the string value to the parameter, say to '@solution_id'.my current select statement which was generated by Visual Studio 2005 looks like this: SELECT [test], [owner], [date] FROM [test_table] WHERE ([solution_ID] = @solution_ID) ...but this only pulls results for the first item checked in the checkboxlist.Does anyone know how this is done? I'm sure it's simple, but I'm new to ASP .NET so any help would be greatly appreciated.
Prepared statement '(@CORP_NAME varchar(150),@REP_NAME varchar(150),@REP_TC_NO varch' expects parameter @CORP_NAME, which was not supplied
I know this is a classical error and I searched through the forum but I could no solve it. I am sure that I defined @CORP_NAME, but it says you did not. My code is below,please help me...
private void Submit1_ServerClick(object sender, System.EventArgs e)
{
erkaner = Page.Session.Contents["CORP_ID"].ToString();
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@CORP_NAME", System.Data.SqlDbType.VarChar, 150, TextBox32.Text));
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@REP_NAME", System.Data.SqlDbType.VarChar, 150, TextBox27.Text));sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@REP_TC_NO", System.Data.SqlDbType.VarChar, 50, TextBox28.Text));
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@CORP_ID", System.Data.SqlDbType.Int, 4, erkaner));sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@REP_EMAIL", System.Data.SqlDbType.VarChar, 50, TextBox29.Text));
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@REP_TEL", System.Data.SqlDbType.VarChar, 50, TextBox30.Text));sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@REP_DUTY", System.Data.SqlDbType.VarChar, 150, TextBox31.Text));
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@FOUND_YEAR", System.Data.SqlDbType.VarChar, 50, TextBox33.Text));sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@COUNTRY", System.Data.SqlDbType.VarChar, 50, DropDownListUlke.SelectedValue.ToString()));
if (DropDownListUlke.SelectedIndex == 148)
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@CITY", System.Data.SqlDbType.VarChar, 50, DropdownlistSehir.SelectedValue.ToString()));else if(DropDownListUlke.SelectedIndex != 0 && DropDownListUlke.SelectedIndex != 148)
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@CITY", System.Data.SqlDbType.VarChar, 50, TextBox1.Text));sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@SECTOR", System.Data.SqlDbType.VarChar, 150, RadioButtonList6.SelectedValue.ToString()));
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@EMP_NUM", System.Data.SqlDbType.VarChar, 50, RadioButtonList1.SelectedValue.ToString()));sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@CORP_ACT", System.Data.SqlDbType.VarChar, 150, DropDownList3.SelectedValue.ToString()));
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@PC_NUM", System.Data.SqlDbType.VarChar, 50, TextBox35.Text));sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@INT_USER_NUM", System.Data.SqlDbType.VarChar, 50, "INT_USER_NUM"));
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@HAVE_LAN", System.Data.SqlDbType.VarChar, 50, RadioButtonList3.SelectedValue.ToString()));sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@HAVE_SERVER", System.Data.SqlDbType.VarChar, 50, RadioButtonList4.SelectedValue.ToString()));
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@ECOM_SER_NUM", System.Data.SqlDbType.VarChar, 50, TextBox37.Text));sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@OT_SER_NUM", System.Data.SqlDbType.VarChar, 50, TextBox38.Text));sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@INT_CON_TYPE", System.Data.SqlDbType.VarChar, 50, RadioButtonList5.SelectedValue.ToString()));
if (CheckBox1.Checked)
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION1", System.Data.SqlDbType.VarChar, 500, "Ticari Uygulamalar (B2B,B2C,e-iş,e-ihracat,…)"));else sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION1", System.Data.SqlDbType.VarChar, 500, ""));
if (CheckBox2.Checked)sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION2", System.Data.SqlDbType.VarChar, 500, "Yönetişim Uygulamaları (Muhasebe, stok, satış, kalite, raporlama,denetim...)"));
else sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION2", System.Data.SqlDbType.VarChar, 500, ""));
if (CheckBox3.Checked)sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION3", System.Data.SqlDbType.VarChar, 500, "ERP Uygulamalari(Unity, SAP, JDE, BAAN, QAD vb.)"));
else sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION3", System.Data.SqlDbType.VarChar, 500, ""));
if (CheckBox4.Checked)sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION4", System.Data.SqlDbType.VarChar, 500, "Müşteri İlişkileri Yönetimi (CRM) Uygulamaları"));
else sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION4", System.Data.SqlDbType.VarChar, 500, ""));
if (CheckBox5.Checked)sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION5", System.Data.SqlDbType.VarChar, 500, "Bilgisayar Destekli Tasarım / Bilgisayar Destekli Üretim (CAD/CAM) Uygulamaları"));
else sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION5", System.Data.SqlDbType.VarChar, 500, ""));
if (CheckBox6.Checked)sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION6", System.Data.SqlDbType.VarChar, 500, "Veri Ambarı ve Veri Madenciliği Uygulamaları "));
else sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION6", System.Data.SqlDbType.VarChar, 500, ""));
if (CheckBox7.Checked)sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION7", System.Data.SqlDbType.VarChar, 500, TextBox36.Text));
else sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION7", System.Data.SqlDbType.VarChar, 500, ""));
sqlUpdateCommand1.CommandText = "UPDATE dbo.CORP_TBL SET REP_NAME = @REP_NAME, CORP_NAME = @CORP_NAME, REP_TC_NO =" +
" @REP_TC_NO, REP_EMAIL = @REP_EMAIL, REP_TEL = @REP_TEL, REP_DUTY = @REP_DUTY, F" +
"OUND_YEAR = @FOUND_YEAR, COUNTRY = @COUNTRY, CITY = @CITY, SECTOR = @SECTOR, EMP" +
"_NUM = @EMP_NUM, CORP_ACT = @CORP_ACT, PC_NUM = @PC_NUM, INT_USER_NUM = @INT_USE" +
"R_NUM, HAVE_LAN = @HAVE_LAN, HAVE_SERVER = @HAVE_SERVER, ECOM_SER_NUM = @ECOM_SE" +
"R_NUM, OT_SER_NUM = @OT_SER_NUM, INT_CON_TYPE = @INT_CON_TYPE, APPLICATION1 = @A" +
"PPLICATION1, APPLICATION2 = @APPLICATION2, APPLICATION3 = @APPLICATION3, APPLICA" +
"TION4 = @APPLICATION4, APPLICATION5 = @APPLICATION5, APPLICATION6 = @APPLICATION" +
"6, APPLICATION7 = @APPLICATION7 WHERE CORP_ID = @CORP_ID";
sqlUpdateCommand1.Connection = sqlConnection1;
sqlUpdateCommand1.Connection.Open();
sqlUpdateCommand1.ExecuteNonQuery(); //This line gives the errorstring mySqlQuery = "UPDATE CORP_TBL SET FLAG = 1 WHERE CORP_ID=" + Page.Session.Contents["CORP_ID"].ToString();SqlCommand myCommand = new SqlCommand(mySqlQuery, sqlConnection1);
myCommand.ExecuteNonQuery();
Page.Response.Redirect("main.aspx");
}
I have a temp table that hosts data from a MDX query, I want to select a column from that table by passing in a parameter and then insert to a new table.
Here's the table structure, let's call it #temp
[Product].[Product Hierarchy].[level 03].[Member_CAPTION], [Measures].[Gross Sales]
Bike, 200
Accessory , 100
I have a table in the DB created as [ProductSales]
Here's what works for me:
insert into [ProductSales](Product, Sales)
Select convert(varchar(20), "[Product].[Product Hierarchy].[level 03].[Member_CAPTION]") as 'Product' , convert(decimal(18,2), [Measures].[Data]) as 'Sales'
From #temp
But in reality the product level is not always on level 03, I want to define a parameter @Product and pass it to the select list.
Here's what I tried to do:
Declare @Product varchar(500) = convert(varchar(20), "[Product].[Product Hierarchy].[level 01].[Member_CAPTION]")
Declare @SQL varchar(MAX)
SET @SQL='insert into [ProductSales](Product, Sales)
Select '+@Product+' as 'Product' , convert(decimal(18,2), [Measures].[Data]) as 'Sales'
From #temp'
Exec @SQL
But it threw me error, what is the right way to do it, is it because the double quote or single quote thing?
How can I input parameter for Store Procedure like In ('Value1','Value2')
Example :
Create procedure GetUsers
@Users nvarchar(200)
as
Select * from Users where UserID in (@Users)
I am using a OLE DB source task and i want to setup a parameter in the select statement. Is this possible and how would this be done. I know you can pass a parameter in the where clause like:
select id, lname, fname, startDate, endDate from Employee where id = ?
How would i set startDate and endDate as parameters as i would like to be able to change these parameters when running the package. I would like to set dates in the select statement as parameters like how you would in the where clause.
Select id, lname, fname, ? startDate, ? endDate, from employee where id = ?
I would like to be able to change these dates without having to go in to the package and hard code it back in there and then deploy.
The package uses a OLE DB source to Flatfile Destination.
I'm writing some generalized stored procedures for use form managed code. The following stored proc works great:
CREATE PROCEDURE fnd_Send (
@Message VARCHAR(5000),
@Contract SYSNAME,
@MessageType SYSNAME,
@FromService SYSNAME,
@ToService VARCHAR(100),
@Encrypted Bit
)
AS
BEGIN
DECLARE @Handle UNIQUEIDENTIFIER;
BEGIN DIALOG CONVERSATION @Handle
FROM SERVICE @FromService
TO SERVICE @ToService
ON CONTRACT @Contract
WITH ENCRYPTION = OFF;
SEND ON CONVERSATION @Handle
MESSAGE TYPE @MessageType(@Message);
Notice the use of SYSNAME parameters €“ translating the parameter into an object name - allows it to work in the BEGIN DIALOG statement when an system object is needed. Works create and cues up generic messages.
The following will not compile:
CREATE PROCEDURE fnd_Receive (
@Queue SYSNAME,
@Message VARCHAR(5000) out,
@MessageType SYSNAME out
)
AS
BEGIN
DECLARE @Handle UNIQUEIDENTIFIER;
RECEIVE TOP (1)
@Handle = conversation_handle,
@MessageType = message_type_name,
@Message = message_body
FROM @Queue;
END
GO
It won€™t let me use the SYSNAME field @Queue in the FROM clause. I€™m getting an unfriendly:
Msg 102, Level 15, State 1, Procedure fnd_Receive, Line 15
Incorrect syntax near '@Queue'.
It looks like maybe I can€™t bind a variable in the FROM clause €“ perhaps like you cannot in a SELECT statement. I can fall back to dynamic SQL in the stored proc or in the managed code; I was hoping not to.
Can anyone shed any light on this? Also, are there any other techniques I'm missing to avoid falling back to a dynamic SQL statement.
Thank you in advance -
Jeff Odell
Catapult Systems
i want to use store procedure in select query statement. store procedure will take two parameters from table and return one parameter.
for example i want to use
select p1 = sp_diff d1,d2 from table1
sp_diff is stored procedure
d1,d2 value from table
p1 is the returning value
My server is MS Sql Server 2005. I'm using com.microsoft.sqlserver.jdbc.SQLServerDriver as the driver class. I've established a connection to the database.
I'm trying to invoke a stored procedure using JDBC and a callable statement. The stored procedure has a parameter @CurOut CURSOR VARYING OUTPUT. How do I setup the callable statement so the output parameter is accepted by the driver?
I'm not really trying to pass a cursor up to the database Server but I'm wanting a cursor back from the stored procedure that is other than the result set or other value the stored procedure returns.
First problem: What java.sql.Types (or SQL Server specific) value do I specify for the out parameter I'm registering on the CallableStatement?
Second problem: What do I set the value of the parameter to?
The code looks like:
CallableStatement cstmt = myConnection.prepareCall(sQuery);
cstmt.registerOutParameter(1, Types.OTHER); // What is the right type?
cstmt.setNull(1, Types.OTHER); // What is the right type?
if (cstmt.execute()) {
ResultSet rs = cstmt.getResultSet();
}
Execution results in a NullPointerException from the driver.
What am I doing wrong?
Thanks for your assistance.
Jon Weaver
I need to set a field value based on two date time parameter's.What is the correct syntax to allow me to pass the value into the field in my SSRS expression ?
=IIf(Parameters!EndDate > Parameters!StartDate.Value, "Overdue")
/* INFO USED HERE WAS TAKEN FROM http://support.microsoft.com/default.aspx?scid=kb;en-us;262499 */
DECLARE @X VARCHAR(10)
DECLARE @ParmDefinition NVARCHAR(500)
DECLARE @Num_Members SMALLINT
SELECT @X = 'x.dbo.v_NumberofMembers'
DECLARE @SQLString AS VARCHAR(500)
SET @SQLString = 'SELECT @Num_MembersOUT=Num_Members FROM @DB'
SET @ParmDefinition = '@Num_MembersOUT SMALLINT OUTPUT'
EXECUTE sp_executesql <-LINE 11
@SQLString,
@ParmDefinition,
@DB = @X,
@Num_MembersOUT = @Num_Members OUTPUT
Just Need Help On This Error
Server: Msg 214, Level 16, State 2, Procedure sp_executesql, Line 11
Procedure expects parameter '@statement' of type 'ntext/nchar/nvarchar'.
I dont know why im getting a errrror b/c I followed http://support.microsoft.com/default.aspx?scid=kb;en-us;262499 exactly
Hello,
since a couple of days I'm fighting with RS 2005 and the Stored Procedure.
I have to display the result of a parameterized query and I created a SP that based in the parameter does something:
SET ANSI_NULLS ON
SET QUOTED_IDENTIFIER ON
CREATE PROCEDURE [schema].[spCreateReportTest]
@Name nvarchar(20)= ''
AS
BEGIN
declare @slqSelectQuery nvarchar(MAX);
SET NOCOUNT ON
set @slqSelectQuery = N'SELECT field1,field2,field3 from table'
if (@Name <> '')
begin
set @slqSelectQuery = @slqSelectQuery + ' where field2=''' + @Name + ''''
end
EXEC sp_executesql @slqSelectQuery
end
Inside my business Intelligence Project I created:
-the shared data source with the connection String
- a data set :
CommandType = Stored Procedure
Query String = schema.spCreateReportTest
When I run the Query by mean of the "!" icon, the parameter is Prompted and based on the value I provide the proper result set is displayed.
Now I move to "Layout" and my undertanding is that I have to create a report Paramater which values is passed to the SP's parameter...
So inside"Layout" tab, I added the parameter: Name
allow blank value is checked and is non-queried
the problem is that when I move to Preview -> I set the value into the parameter field automatically created but when I click on "View Report" nothing has been generated!!
What is wrong? What I forgot??
Thankx for any help!
Marina B.
I am working on existing ssrs report. When I see the preview I could see the extra parameter than the actual parameter.Â
How do I know , when this parameter is coming in the preview ?
I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chartÂ
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
Hi,
I need "conditional" cascading parameters: In Report Manager when one changes parameter 1, parameter 2 get changed based on parameter 1. Optionally, one can also enter values to parameter 2 directly.
I was able to achieve this in SSRS 2000 (SP2) with the following setups. SSRS 2005 and SP1 no longer works - Parameter 2 always shows its default value regardless whether one select a value in Parameter 1 or not.
Parameter 1
available values: from query
default values: non query (specify a value "<None>")
Parameter 2
available values: Non query (no value specified)
default values: from query (based on Parameter 1)
It seems to me that the default value in SSRS 2000 is considered as cascading parameter. But it is no longer the case in SSRS 2005.
Is this a SSRS 2005 bug? is there any other work arounds or suggestions?
Thanks.
Kong
Hi,
I have parameters in my report. The user can choose the year, month and date (3 parameters).
Now I want to set default vaules for the parameters , so that the user sees the report for example for the current day without selecting the parameters. I tried to set the type of the parameters to DateTime and the default value for example for the year to "=Today().Year" . But when I execute the report an error occures . Something like : no validValue for this parameter.
My Attributes for the year month and date are from an Analyis Services Cube from a Server Time dimension .
Does somebody know how to make it possible to set default values for this parameters?
Other question :
Does somebody know how I can reduce the values for a parameter. For Example I have a parameter "year" from a server time dimension from a cube. The values which are available are "Year 2004", "Year 2005", "Year 2006", "Year 2007".
But I want that the user only can choose "Year 2006" or "Year 2007" ant not every Year or "All".
Or Other Example: The User should only choose a Date that is int the past or Today but not a Date in the future.
Thanks !
JF
my dataset from sharepoint list. and this dataset value assign to parameter. i want when no any parameter is selected than it should filter like "ALL". when i select alow null value it give me prompt error you  can not select null in multivalue parameter.How can i do it. i am using share point list.
View 3 Replies View Related