In What Sql Server Data Type Would You Store Security Ids?
Nov 5, 2007
security ids seem to be made up of at least 3 32 bit unsigned numbers and a few smaller numbers. We believe their lengths vary. We dont mind dropping the "S" from the front. What data type do you recommend be used for their storage? We expect only limited joins and user visibility on this column. We may wish to create an index on this column. We think varchar and varbinary are the two major choices.
I'm using the XML Source to process a hierarchical set of XML. As such, the XML Source creates keys to maintain the hierarchy. This is very convenient, and keeps me from having to invent my own keys.
The problem is that the datatype of these keys defaults to DT_UI8. Which SQL Server 2005 datatype should I use to store these values in my staging tables? BIGINT corresponds to DT_I8, which can't accept DT_UI8 values.
Hi when I store html file with image in image data type of database sqlserver, where will actual data store (content of html file, and file image which display on html file), in which folder Can I help you
What datatype should I take to store time in a table -- datetime , float or decimal?
my requirement is to store "Worked Hours in a day by an employee" in the field say, 9 hrs and 30 mins.
I should be able to manipulate data in this field such as total hours present in the month, extra hours worked in a day (considering 9 hrs as standard time),less hours worked in a day, and so on
Hello friends what is the right datatype to store the hours and minutes part in the database? i found some info which says we have to convert the duration(hrs and min) into minutes and then store is it the right approach? Regards Sara
I have a C# app linked to a SQL db and I need to store it's version number in a table (could be something like 1.2.789) but I cannot find any datatype which allows me to do this.
I could create three fields in the table for each number but I don't want to.
hi my friends;i have got a problem.i thing you can help mea='x80x02}qx00(Kx02Kx03Kx04Kx06Kx05Kx07u. 'i want to store database but i don't know which encoding and dataytpepls help mesorry for my bed english...thanks all
I was working on figuring out where a certain application wasstoring the multiple selection choices I was doing through the app.I finally figured out that they were being store in an IMAGEdata type colum with the variable length of 26 bytes.This is the first time I ran into such way of storing multipleselections in a single Image data type.Is this a better alternative than to store into a One-to-Manytables? If so then I'll have to consider using the Image datatype approach next time I have to do something like storing1 to thousands of selections.Thank you
Hi Experts, I have an urgent needs. I want to store null for decimal type to sql server. But I do not know how to do that. I get data from user input. If the user did not enter anything in the textbox, then I want to store null to sql server. I list a piece od code below. I got error in the last line fItemObject.ChargeAmount = null;. if (!String.IsNullOrEmpty(txtDescription.Text)) myObject.LongDesc = txtLongDesc.Text; else myObject.LongDesc = null; if (!String.IsNullOrEmpty(txtAmount.Text)) myObject.Amount = Convert.ToDecimal(txtChargeAmount.Text); else myObject.ChargeAmount = null; // Then I submit the myobject to the sql server. Thank you very much in adavance!
Hello, I am wondering how it is going to work using SQL Server configuration type to store connection string in the SQL Server table. How does SSIS know what database to connect to if its connection string is store in the database? Thanks
I have created a windows library control that accesses a local sql database
I tried the following strings for connecting
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Trusted_Connection = true"
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Integrated Security=SSPI"
I am not running the webpage in a virtual directory but in
C:Inetpubwwwrootusercontrol
and I have a simple index.html that tries to read from an sql db but throws
the error
System.Security.SecurityException: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet) at System.Security.PermissionSet.Demand() at System.Data.Common.DbConnectionOptions.DemandPermission() at System.Data.SqlClient.SqlConnection.PermissionDemand() at System.Data.SqlClient.SqlConnectionFactory.PermissionDemand(DbConnection outerConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection,
etc etc
The action that failed was: Demand The type of the first permission that failed was: System.Data.SqlClient.SqlClientPermission The Zone of the assembly that failed was: Trusted
I looked into the .net config utility but it says unrestricted and I tried adding it to the trusted internet zones in ie options security
I think that a windows form connecting to a sql database running in a webpage should be simple
How would you set up a group of developers-application programers in SQL 6.5 to let them have authority so that they all can store, update, delete, & execute each others stored procedures, within a particular database. They are not permitted to modify the table structures within a data base, but I can not seem to let them have authority so that they can work on and execute any of their sp's unless the DBO actually does the sp modifications? They do not want to modify any code by putting the sp owners name in front of the sp name (I don't blame them), otherwise Error 2812 results.
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
I can populate a dataTable with type double (C#) of say '1055.01' however when I save these to the CE3.5 database using a float(CE3.5) I lose the decimal portion. The 'offending' code is:
We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Hi, I tried entering this value "8/24/2006 1:35:00.127 PM" with 127 as the milliseconds in a datetime field, but encountered error saying inconsistent datatype ... Anyone knows how to store datetime value with milliseconds in the SQL database? Thanks
I'm developing a SQL Server 2005 application that is using a MS Access Data Project as the front end. This application deals with sensitive data such as salary information and related calculations. I would like to prevent anyone but the user who comes through the Access app, from seeing any columns in the database, and from viewing or executing any procedures or functions. This includes DBAs.
I'm not sure of the best way to approach this, or what type or level of security would fit in this situation.
Hi - I'm using Session variables to store information (sort of webshop).
The sessions are a mix of the usual straightforward strings, wich are no problem - but I also have a DataTable which I store in a session variable, and I also have an array, which I store in a session variable eg. session("day")(x) where x is the item in the array.
I want to give my users the ability to store the items they've selected in my database, but have no idea of what type of field I should use for the datatable and array session variable. Should I use a TEXT field, or is there another more appropriate one'?
I was wondering if anyone knows how to convert an array of bytes to an SQL CE 3 image type and vice versa.
I am using the SDF Signature control and I would like to store the signature as an Image. It needs to be an image so it can be synced with a desktop access 2003 database.
I have a column in SQL server which is of type ntext. Selecting the specific column to view it in report builder, an error message appears with the following description:
- Cannot run this report. The grouping expression 'nameofcolumn' returns the datatype binary. The Grouping Expression cannot return binary data.
Report Builder recognises this as if it was an image...
hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
in my SQL database I have the date feild as datetime and the version as nvarchar(max) this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient Imports system.web.configuration
Partial Class Admin_emag_insert Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Record_DateTextBox.Text = DateTime.Now
End Sub
Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click Me.VersionTextBox.Text = "" End Sub
Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click Dim objConnection As SqlConnection Dim objDataCommand As SqlCommand Dim ConnectionString As String Dim record_date As Date Dim version As String Dim emagSQL As String
'save form values in variables record_date = Record_DateTextBox.Text version = VersionTextBox.Text
'Create and open the connection objConnection = New SqlConnection(ConnectionString) objConnection.Open() emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _ "values('" & record_date & "','" & version & "')"
'Create and execute the command objDataCommand = New SqlCommand(emagSQL, objConnection) objDataCommand.ExecuteNonQuery() objConnection.Close()
AddMessage.Text = "A new emagazine was added successfully"
Hi,I would like to convert a dollar amount ($1,500) to represent Fifteenhundred dollars and 00/100 cents only for SQL reporting purposes. Isthis possible and can I incorporate the statement into an existingleft outer join query.Thanks in advance,Gavin