hi,
i really need ur help..
I am creating an a stored procedure which could insert new records, the identity of the primary key in my table is not incremented. i want to increment the id when adding a new record in the stored procedure. what would be the system for that?
thanks
Funnyfrog
Hello!
I is true that SQL-Server use lower values than last integer value (in auto incremet field). Is there option that i could prevent that. So the Server would always put + 1 for the auto increment value.
Thanks
Juissi
If delete all the records from a table that has an incremental identity. Is there a TSQL way of reset the first number on an insert back to be 1 again without going to the table taking it off then saving it the putting it back on again?
View 2 Replies View RelatedHello, I need some help writing a script to generate Identity keys. I cannot use the row number generator because I would like to start the identity at a package level variable. Is this possible?
Thank you in advance
HiI have a Jobs Table: Job_ID,User_ID,Job_Info,...Job_ID is the Primary Key.I want to add [Job_ID_PerUser] so I wiil get:Job_ID Job_ID_PerUser User_ID1 1 A2 1 B3 1 C4 2 A5 3 A6 2 CThanks
View 4 Replies View RelatedIam trying to add a column to an existing table that would be an "identifier". I called it "ReadingNumber" and selected Identity "Yes" and "Identity increment" as 1.
When I add it, it just gives the rows random numbers instead of by the order they were inserted into the database by.....is there a way to autonumber the columns correctly? I have a COLUMN called Date and also one called Time that have the date and Time, but the format is char.
Would I have to convert the date time columns into something SQL understands, sort them ASC or DESC and then do the Identity column add?
Thanks for any help
Edited
Reset the Identity IncrementHello:I have a table with a bigint type column (field) that has an identity seedof 1 and an identity increment of 1. The column is the primary key for thetable.After I backup and clean out the database (delete all of the data in the DB)I need to have the column with the identiy seed/increment value reset to 1automatically. (start counting at 1 again). How does one do that, becauseas it is now, the DB keeps increasing the value of the column from where itleft off, regardless of the fact that I deleted all of the data in thetable.The DB is MS SQL Server 2000.Thanks and appreciate any help.Ryan Kennedy
View 2 Replies View RelatedI have created a table that generates a sequential id and a
stored procedure that will return that id. The trouble is
no matter what I set the Seed or Increment values to, the
id will always start with #1 and increment by 1.
My table is BILLING_TIME_ID
Identity field BT_GEN_ID
(SEED 200, INCREMENT 1)
The sp is as follows:
CREATE PROCEDURE BT_NEXT_ID
AS
INSERT dbo.BILLING_TIME_ID DEFAULT VALUES
select count (*) from dbo.BILLING_TIME_ID
GO
I have double checked that Identity_Insert is set to off for
this table. (does this default to off unless it is set to on?) Since
there is only 1 field in the table, I don`t have any indexes set.
Thanks for your help!
Toni
Hi, for some reason I want to have a unique ID with a seed and random Identity increment (I want an ascending ID's but without able to know how many objects there are).
any ideas?
thanks in advance
trying to change a column that is just a INT NOT NULL column, to have an auto-increment.
Code:
ALTER TABLE [ImpExpTables].[dbo].[ImpExp_eBayLocalNeedsDeleted]
ALTER COLUMN ID int IDENTITY(1,1) NOT NULL
just gives error at IDENTITY
Hi,
How to Change Increment Value for existing Identity Column (MS SQL2000) ?
I know how to change the seed :
DBCC CHECKIDENT (activity, RESEED,4233596)
but I need the future id generated with step 2
4233596
4233598
4233600
I would like to do it using T-sql because I will need to do it every day after syncronising with another SQL server .
Thanks,
Natalia
Hi all,
I've been thrown a curve ball late in the game on an application I'm developing. Without getting into the specifics of the application I store a unique employee ID number for all person records in it. This ID is provided to us by the companies we're servicing. Up until this point in time we didn't have need of an externally visable ID other than the one provided to us. Now, a need for an internally generated (by our application) unique ID has been discovered. This number needs to be a minimum 5 digits (e.x. 10001, 10002, ....). I could achieve this nicely by seeding an identity column at 10000 with an increment of 1. However, I've alredy made different settings for this and there are records in the db with the old ones.
My question is: If I initially set the seed / increment at 1/1 can I change this after the fact without causing data integrity problems. Will all subsequent insertions into this table just start at the new values?
Or, ideally I'd like to create a new column seperate from the PK Identity column already in place that serves the same function, incrementing a 5 digit number by 1 for each new record. Seems that you're only allowed one identity column per table though. Is there another way to achieve get the same result as identity?
Thanks!
Dear Sir,
the following code is copied from the SQL Server Help Example.
CREATE TABLE MyCustomers2 (CustID INTEGER IDENTITY (100,1) PRIMARY KEY, CompanyName NvarChar (50))
INSERT INTO MyCustomers2 (CompanyName) VALUES ('A. Datum Corporation')
ALTER TABLE MyCustomers2 ALTER COLUMN CustId IDENTITY (200, 2)
It gives the following error.
Msg 156, Level 15, State 1, Line 3
Incorrect syntax near the keyword 'IDENTITY'
Can U please guide me abt the error.
with regards,
wilfi
Hi
I am trying to use the identity data type ( column)
I am using examples from the book and management studio in sql server 2005.
I am using the identity property for the customer Id in customers table.I accidentatly executed the querry twice and I had two same record with different customer id numbers of 1 and 2 . I realised the problem and I had to delete the second record.
The problem is now even if I have deteted the 2nd record with customer id 2 , when I insert a new record the identity value ( customer Id) increments with a number after the value I deleted. i.e if I deleted a second row with customer id 2 ( identity 2) when I enter a new record it enters with a customer id of 3 and whenever i add a new record it increments from there.
So instead of first record have cust id 1 and second record customer id 2 etc , I get first record with cust id 1 , second record with cust id 3 , third record cust id 4 etc.
How can I get rid of this wrong values of identity values whenever I delete a record and try to add a new record?
Thanks
I had a strange problem today with one of the identity fields in a frequently used table. It appears that the Identity column for a table had stopped incrementing after it reached 2147483585. Since I had inherited this table, I am not sure if the identity column type has been modified from int to numeric, but the current type is Numeric (9) which is 19 precision and 0 scale value.
When resetting the seed to 1, it started working. I tried creating a temp table with numeric value and it increments well beyond billions with no problems.
Has anyone encountered this? Any best practices around defining Identity data type (ie. use int or bigint and avoide Numeric)?
Thanks
NS
I am looking to make the primary key auto increment by 1. I have found by looking around the internet that you need to do this in the Tables -> [Table Name] -> Columns -> [Column Name], Properties window, and I see the "Identity Increment" however all of the properties there are greyed out -- I can't access them. Any ideas on how to make this work?For some background: I'm running SQL Server 2005 with Visual Studio 2005. To create this database, I right-clicked on my project, and went to 'Add SQL Database', I filled in the columns all from within visual studio.
View 1 Replies View RelatedI have an MS SQL Server table with a Job Number field I need this field to start at a certain number then auto increment from there. Is there a way to do this programatically or within MSDE?
Thanks, Justin.
Hello,
I Have a table that needs to have 2 unique number.
detail_id and detail_print_id.
detail_id is already an IDENTITY.
both fields need to be different, because when importing, it imports the same data into a table twice, with only a slight data change (and id is not one of the changes).
So I thought i could do the following:
detail_id INT NOT NULL IDENTITY(1,2),
detail_print_id INT NOT NULL IDENTITY(2,2),
--blah blah
that way, the detail_id will always be odd, and the detail_print_id will always be even. however SQL Server 2005 only allows 1 identity per table, and both these fields need to be auto generated when the field is inserted, so as to prevent double data.
is there anyway I can create a int column to auto increment, without the column being an IDENTITY??
also, I would prefer to not have to create a second table with a single column just for this work.
Thanks,
Justin
I need to return the "autoID" number that is created at the time of an insert. Is there way of doing that?
Thanks,
Ed
I am trying to do this in MS Access actually but it is an SQL question.
This query:
SELECT LoanNo, COUNT(LoanNo) AS 'Count'
FROM DedupTest031504
GROUP BY LoanNo
HAVING COUNT(LoanNo) > 1;
returns:
LoanNo Count
46690128 2
46861821 2
47762138 3
47762154 3
48257239 2
48257663 2
48257719 2
48258143 2
48258167 2
which is correct but how do you SUM the COUNT field? In other words, I want the total number of duplicate records in the table. Is there another way alltogether?
I tried:
SELECT LoanNo, SUM(COUNT(LoanNo))
FROM DedupTest031504
GROUP BY LoanNo
HAVING COUNT(LoanNo) > 1;
but I get a "CANNOT HAVE AGGREGATE FUNCTION IN 'SUM(COUNT(LoanNo))' error.
Thanks.
ddave
some time back i had problem with sending the service broker messages on remote machine,
I had some security issues and they were resolved by the help of Remusu.
since the ip of the remote machine was changed in between so i just re-executed the same scrips which used to successfully send messages on the remote machine.(I just updated the IP in the route )
To my surprise same script did not work now where as no change have been made.
I am doing the following:
1.Created the certificate and end point on the sender side. back up the certificate in a file and copied to the other machine.
same step was repeated for receiving side as well.
2.both the side i created the certificates using the back up files from other sidend proper authorization
3.Then I created the database,route,messagetypes,contract,queues,services etc both the side.
4. then i setup dialog security(ie.created the dialog security certificates both the sides and back up them). Later I copied these back up files to each other, create some dialog user and create certificate using authorization to these remote dialog users created.
5.I also created remote service binding on both the sides and granted send permission to the remote dialog user.
When i send the message from sender to the receiver, and run the profiler, I see that on the sending side none of the broker event gives any error.
In the recever side I get the followng Event:
Broker:Message Undeliverable
This message could not be delivered because the security context could not be retrieved.
Error 11229.
I m surprised that the same script was run in the same order,Why was it running before and not now.
I also checked the End points using telnet and they seem to be fine. Also the firewall was "Off" on both the machines i.e. there was no change in system state also.
Please provide the solution. Thanks in advance.
Hello,
I am retriving records on a page, I am able to make changes cuase the data is displayed in textboxes, my question is how to save the changes I made in the database.
Also in my below code for retriving the data what statement do I need to add so that I can use a QuerryString to filter the results. ex (default.aspx?CID=1) and only records that
match that would display.
Here is my code: for retriving data
Private Sub displayrecord()SqlConnection1.Open() Dim SqlDataAdapter1 As New SqlDataAdapter("SELECT * FROM table1", SqlConnection1) Dim objReader As SqlDataReader Dim SqlCommand1 As New SqlCommand("SELECT * FROM table1", SqlConnection1) SqlDataAdapter1.Fill(dsMember) objReader = SqlCommand1.ExecuteReader() objReader.Read() txtbox_confirmpass.Text = objReader("MemberPassword") txtbox_name.Text = objReader("MemberName") txtbox_birthdate.Text = objReader("MemberDOB") txtbox_email.Text = objReader("MemberEmail") Dropdown_Gender.SelectedValue = objReader("Gender") objReader.Close() SqlConnection1.Close() End Sub
Private Sub btnUpdate_Click
Hi,
I have a table full of items which can be searched.
I also have another table with the ID of each item and columns for no of times details shown, no of times saved etc.
What I would like to do is increment a value in this second table for each item every time it is returned in a search.
What would be the best way to do this?
(Im using a Stored Procedure)
Thanks in advance,
Pete
Hi,
I need to save all the rows that are retrieved from the sql server 2005 db into any external file such as excel.
Can any one give me any clue?
Gaurish Salunke
Software Developer
OPSPL
I've moved the database tables from the .mdb file to Sql Svr and now I havean *intermittent* problem. When I select a record from a combo box, it willintermittently pull up the wrong record. The code that does the search isbelow. I have a column named 'ProsId' that is a unique number (identitycolumn). The error -- when it happens -- seems to only happen on higherProsId numbers. At first it appeared to me as some sort of data conversionthing, but I'm not so sure now. Here's some examples:Record selected Record actually displayed---------------- -------------------------100,000 41,85959,073 15,79457,000 11,27357,001 11,27445,000 45,000 <--- appears to return correctvalue every time. Numbers lower than this also seem to return the correctrecord every time.Private Sub cboFindProsName_AfterUpdate()' Find the record that matches the control.Dim rs As ObjectIf Len(Trim(Me.cboFindProsName.Text)) > 0 ThenSet rs = Me.Recordset.Cloners.FindFirst "[ProsId] = " & (Me![cboFindProsName])Me.Bookmark = rs.BookmarkEnd IfEnd SubMany Thanks!
View 5 Replies View Relatedhi, could anyone tell me how to display data retrieved using sql in DataGridView?
View 6 Replies View RelatedHI
I have a service broker setup between 2 remote server. The message send does get sent to the target, but I am having a problem where the end conversation message from the target is failing. I did a trace on both the target and the source server. here's what I found
On the Target Server:
on Broker: Message undeliverable --- This message could not be delivered because it is a duplicate
On the Source Server
on Broker: Message undeliverable --- This message could not be delivered because the security context could not be retrieved,
I do not understand why the message is delivered, but the end conversation message is not getting thru. On the Target transmission_queue. I have millions of messages like this
conversation_handle to_service_name is_end_of_dialog message_body transmission_status
E0C69E8F-37E9-DB11-AB7A-00145E7A209C source 1 NULL
I reinstalled the broker several times, but always get this problem.
thanks
Paul
How can I get the data retrieved from the exec function below into Excel
DECLARE @columns NVARCHAR(MAX) ,
@columns_n NVARCHAR(MAX) ,
@sql NVARCHAR(MAX);
SET @columns = N'';
SET @columns_n = N'';
SELECT @columns += N', X.' + QUOTENAME(aaTrxDim)
[code]....
Following is my db table
student_id student_code student_parent_id student_name
1 11 0 a
2 111 1 b
3 1111 2 c
4 11111 3 d
I want to generate following op
student_id student_code student_parent_id student_name Hierarchy
1 11 0 a 11
2 111 1 b 11-111
3 1111 2 c 11-111-1111
4 11111 3 d 11-111-1111-11111
Following is the query
i want to retrieve around 10000 in one go.. its taking around 8 seconds.. how to make it faster?
even if i retrieve 1 record or 10000 records, its taking around 8 seconds...
--- create table
create table test(sid bigint, scode nvarchar(50), parentid bigint, sname nvarchar(50))
---- insert records
insert into test values (1, '11', 0, 'a')
insert into test values (2, '111', 1, 'b')
insert into test values (3, '1111', 2, 'c')
insert into test values (4, '11111', 3, 'd')
---- result query
;WITH SInfo AS
(
SELECTsId
,scode
,ParentId
,sName
,CONVERT(nvarchar(800), scode) AS Hierarchy
[Code] .....
When I try to connect to a MS Access 2000 database inenterprise Manager , i getan error "Login failed -Catalog information cannot be retrieved". I get thiserror message in a dialog box about 5 or 6 times. Thedatabase file location ends up in the file location box. Ican click "Test Connection" and the connection succeedswith a series of dialog boxes with the message "Loginfailed - Catalog information cannot be retrieved"Any help is appreciated greatly.--Posted via http://dbforums.com
View 2 Replies View RelatedHi,
I have a report with 5 filters which can be applied to it. The records are grouped by the Rotation programme there are on, with a subtotal for each unique programme name.
The report seems to work fine, but upon closer inspection - we noticed that 2 of the records are not being displayed. As a result, the total count is out by 2.
We tracked down the missing records so I ran the SQL query with a Where clause, and it was able to find the two records.
What could possibly cause this behaviour? Please see included SQL statement :
Code Block
SELECT Posts.PostNumber,COUNT(Posts.PostNumber) AS RPCount, Incumbents.Name AS IncumbentName, Grades.GradeTitle, Specialties.SpecialtyTitle,
Hospitals.Name AS Hospital, Genders.Gender, [Incumbent History].YearGraduated, COUNT([University Origins].Origin) AS OriginCount,
Incumbents.Nationality AS NationalityID, Countries.[Country Name] AS Nationality, [Rotation Programmes].[Programme Name],
Posts.[Post Approved for Training], [University Origins].Origin, Posts.OldPostNumber, [Rotation Programmes].[Programme ID]
FROM Posts INNER JOIN
Incumbents ON Posts.PostNumber = Incumbents.PostNumber INNER JOIN
[Incumbent History] ON Incumbents.[Incumbent ID] = [Incumbent History].IncumbentID INNER JOIN
Grades ON Incumbents.[Official Grade] = Grades.GradeID INNER JOIN
Specialties ON Posts.Specialty = Specialties.SpecialtyID INNER JOIN
Hospitals ON Posts.HospitalID = Hospitals.[Hospital ID] INNER JOIN
Genders ON Incumbents.GenderID = Genders.GenderID INNER JOIN
Countries ON Incumbents.[Country Of Birth] = Countries.[Country ID] INNER JOIN
[Rotation Programmes] ON Posts.[Rotation Programme] = [Rotation Programmes].[Programme ID] INNER JOIN
[University Origins] ON [University Origins].[Uni Origin ID] = Incumbents.[University Origin]
GROUP BY [Rotation Programmes].[Programme Name], Posts.PostNumber, Incumbents.Name, Grades.GradeTitle, Hospitals.Name, Genders.Gender,
[Incumbent History].YearGraduated, [University Origins].Origin, Incumbents.Nationality, Countries.[Country Name], [University Origins].Origin,
Posts.[Post Approved for Training], Posts.OldPostNumber, Specialties.SpecialtyTitle, [Rotation Programmes].[Programme ID]
I am trying to connect to a SQL database on a Windows Server 2003 machine via a Microsoft Data Link on an XP machine.
I select Microsoft OLE DB Provider for SQL Server on the provider tab of the Data Link.
On the connection tab I input the IP of the server and select "Use Windows NT Integrated securty"
However when I test the connection I get the following errors:
[DBNETLIB][ConnectionOpen(COnnect()).]SQL Server does not exist or access denied.
followed by the error: "Login failed. Catalog information cannot be retrieved"
The firewalls on both machines have been dropped but this did not work. The XP machine can ping the Server 2003 machine and connect to a C$ share.
I am using SQL Server Express 2005 on the Server. I can connect to the database using SQL Server Management Studio Express on the server. However the XP client machine is not having any luck connecting via the Microsoft Data Link.
Hi,
This may be a really silly question, but I am starting to experiment with stored procedures for the first time and I am not really sure about how they work. I am working in SQL Server Management Studio Express...
When putting a SELECT query statement into a stored procedure and executing it, how or where can you get or find the actual record set supposedly retrieved?
Thanks for any help..
--------------------------set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [petrander].[DynamicQuery] @taxparent int = 1ASBEGIN SET NOCOUNT ON; SELECT ID, TaxonID, Taxon FROM QueryView WHERE ParentID1 = COALESCE(@taxparent, ParentID1) AND ParentID2 = COALESCE(@taxparent, ParentID2) AND ParentID3 = COALESCE(@taxparent, ParentID3) AND ParentID4 = COALESCE(@taxparent, ParentID4) AND ParentID5 = COALESCE(@taxparent, ParentID5) AND ParentID6 = COALESCE(@taxparent, ParentID6) AND ParentID7 = COALESCE(@taxparent, ParentID7) AND ParentID8 = COALESCE(@taxparent, ParentID8)END