Indentity In 1 Column Table
Mar 24, 2008i have table with one column
CREATE TABLE [dbo].[tblTest](
[ID] [int] IDENTITY(1,1) NOT NULL
how do i insert values.(i,e identity)
ADVERTISEMENT
Adding A Indentity Column In An Existing Table.
Feb 20, 2008
Dear Friends,
I need a SQL Query to add a identity coloumn for anExisting table. (ie) when i try to alter the table i want to add an identity coloumn.
Thanks in advance.
Indentity Column
Feb 24, 2000when I use the code
SET IDENTITY_INSERT tss_Cable ON
go
DECLARE @@nextidentval int
SELECT @@nextidentval = MIN(IDENTITYCOL) + IDENT_INCR(tss_Cable)
FROM tss_Cable t1
WHERE IDENTITYCOL BETWEEN IDENT_SEED(tss_Cable) AND 2147483646
AND NOT EXISTS (SELECT * FROM tss_Cable t2
WHERE t2.IDENTITYCOL = t1.IDENTITYCOL IDENT_INCR(tss_Cable))
go
SET IDENTITY_INSERT tss_Cable OFF
I get the following error.
error line 2 Incorrect syntax near IDENT_INCR.
error line 6 incorrent syntax near IDENT_INCR.
I would like to reset the identity without droping the table. I'm using
sql 6.5. I looked at Mark Lessard 12/17/99 respose on this issue and changed
the code to match his version but the same error occured.
Using The Indentity Column
Feb 22, 2008
As an example I have three tables
Table1
ChildName (nvarchar)30
ChildID (INT) Set as €˜IDENTITY€™
Table2
ParentName(nvarchar)30
ParentID (INT) Set as €˜IDENTITY€™
Table3
ChildID (INT)
ParentID (INT)
I have the following code.
Dim dbcnn As SqlClient.SqlConnection = New SqlClient.SqlConnection(dbsettings.getDatabaseString)
Dim dbcmd As SqlClient.SqlCommand
dbcmd_AddDriverRoute = New SqlClient.SqlCommand("usp_Insert", dbcnn)
dbcmd.CommandType = CommandType.StoredProcedure
dbcmd.Parameters.AddWithValue("@ChildID ", cmb_child.SelectedItem)
dbcmd.Parameters.AddWithValue("@ParentID ", "@@IDENTITY")
dbcnn.Open()
dbcmd.ExecuteScalar()
dbcnn.Close()
basically what I want to do is when a child is added I want to be able to insert ParentID (INT) Set as €˜IDENTITY€™ value into table3 ParentID (INT) .
I have my sql statement in place I am not sure how to take an identity value stored in the db.
Drop Indentity From Column
Dec 6, 2007I am trying to remove the Indentity property from a column so I can do some clean up. Then will need to add it back. Adding Indentity property back is not a problem, but cant figure out how to remove it in the first place.
Any help would be greatly apprecaited.
Thanks
Dave
How To Make Indentity Column Continually?
Nov 16, 2004Hello, everyone:
I have a table with an indentity column as first column. At beginning it is continue such as 0-50. I delete last 20 columns by hand. The 0-31 is left. When the new data is inserted, I hope the new indentity column begin from 32. How to do that? Now the indentity column begin from 51 as the new data is inserted.
Thanks a lot
ZYT
Indentity
Feb 20, 2006Arkadiy writes "Why @@indentity returns NULL after inserting new row?"
View 6 Replies View RelatedBCP Into An Indentity Field
Jun 15, 2000Hi folks!
I need to populate a table having an identity field with data (basically I want to make a copy of a table with identity column on another server). When I use BCP to insert data then the values in the identity field is not the same as in the data file but gets incremented from the original.
eg. if the records in the flat file are-
1, 'test1'
2, 'test2'
Now if i insert this into the table (say the last identity value was 100) then rows get inserted as-
101, 'test1'
102, 'test2'
Is there any way by which I can retain the values of the identity column to be same as in the file?
Thanks!
Reset Indentity
Apr 7, 2003How do reset identity seed on table, for example I have table that has gap in the identity such as (1,2,3,5,6, etc..) and I want reset the entire table.
Thank You,
John
Varchar(8) And Indentity
Feb 27, 2006What is the best way to do Indentity(1,1) on fields which is varchar(8)?
View 1 Replies View RelatedIndentity Insert
Jul 20, 2005I'm doing a data transfer from Access to SQL Server, I wish to keep theidentity column (autonumber) values as all the data is already related. Itried the first table append query including the identity column, it worked.Was this fluke? Will it always work? I was under the impression that I wouldhave to issue a "set identity_insert on" before doing this. The SQL databasewill have absolutely no data before the transfer routines are run.
View 15 Replies View RelatedRegarding SELECT @@INDENTITY
Apr 25, 2008IDE: Visual Studio 2008
DB: SSCE 3.5
OS: WinXP SP2 (CHS)
.....
Code Snippet
String str_sql_insert = "INSERT INTO Person (Name, ShortName, Description, Tag) VALUES ('" + this.TextBox.Text.Trim() + "', '" + this.ShortNameTextBox.Text.Trim() + "', '" + this.DescriptionTextBox.Text.Trim() + "','" + this.TagComboBox.SelectedValue.ToString().Trim() + "); SELECT @@INDENTITY";
SqlCeConnection tempConn = dbman.getConn();
SqlCeCommand tempComm = new SqlCeCommand(str_sql_insert, tempConn);
tempConn.Open();
Object ob = tempComm.ExecuteScalar();
.....
When I run the application there is a error report on the last line of the code above:
[ Token line number = 1,Token line offset = 127,Token in error = SELECT ]
When I copy the SQL string into the QueryBuilder in the VS2008 it is works and returned a correct value.
I want to know is there something wrong with the sql string or the ExecuteScalar() cant execute 2 steps command?
thanks
Resetting Indentity Columns
Nov 15, 1999I would like to reset the Identity column in a table so it starts at the begining. I am planning to clean out this table.
Thanks
Gary
Stored Prcedure And @@indentity
Jul 12, 2005I'm trying something new, and have hit a snag.
basically, I'm attempting to use two INSERT commands in a single SP. I want to use the PK from the new entry and apply that to the second.
here's the code;
:::::::::::::::::::::::::::::::::::::::::::::::::: :::::::::::::::
CREATE PROCEDURE spInsertNewUser
@fn varchar(50),
@ln varchar(50),
@add varchar(50),
@add2 varchar(50),
@ct varchar(50),
@cty varchar(50),
@st varchar(4),
@pc varchar(50),
@ph varchar(50),
@cp varchar(50),
@fx varchar(50),
@em varchar(50),
@pw varchar(50),
@uid varchar(50),
@rc bit,
--@indentity int OUTPUT,
@cid int
AS
SET NOCOUNT ON
INSERT INTO tblUserInfo
(
firstName,
lastName,
address,
address2,
city,
county,
state,
postalCode,
phone,
cellPhone,
fax,
email,
pword,
userUID,
regConfirmed
)
VALUES (
@fn,
@ln,
@add,
@add2,
@ct,
@cty,
@st,
@pc,
@ph,
@cp,
@fx,
@em,
@pw,
@uid,
@rc
)
SELECT @@IDENTITY FROM tblUserInfo
--SET @indentity = @@IDENTITY
INSERT INTO tblUserToCountySubscribedLKP (
UserID, CountyID
) VALUES(
@@indentity, @cid
)
:::::::::::::::::::::::::::::::::::::::::::::::::: :::::::::::::::
I'm sure the problem is largely due to the fact that I am close to completely clueless on such things, but a bit of timely advice from the sage sql wizards here would be most welcome and greatly appreciated.
Access Db @@indentity How To Get New Record
Jan 4, 2005Hello folks,
I am using the following INSERT statement to add a new record in my table. I want to be able to get the Autonumber UserID field of the newly created record but I am getting the following error: "Characters found after end of SQL statement"
Code:
INSERT
INTO tblUser
(LoginName, UserPassword, EmailAddress, City)
Values
(@User, @UsrPassword, @EmailAddress, @City);
SELECT @@IDENTITY As 'Identity'
What is wrong in my statement?
How do I retrieve the Autonumber field of the newly created record?
How do I handle if the LoginName and/or EmailAddress already exists?
I want to be able save this INSERT statement as an Access Query and call it from my C# code.
I would appreciate any help.
Thanks
Mike
Alter Indentity Field
Mar 24, 2006Hi Guys,
I'm using SQL server 2000.
How do I alter column/field from type int (with Identity = Yes Not For Replication) to just normail int field. No more identity. I want it to be done using SQL script( sql query analyzer).
Please help me on this, thx
Regards,
Shaffiq
Is It Possible That DTS Skipped Indentity Attribut
Sep 11, 2006I imported a table using DTS.
I run SQL statements in my original server database. It works well.
But when I run the same instructions within a stored procedure in my new workstation where I improrted the table I get this error:
Server: Msg 515, Level 16, State 2, Procedure InsertFichierPrix, Line 11
Cannot insert the value NULL into column 'Id', table 'myDBLive.dbo.FichierPrix'; column does not allow nulls. INSERT fails.
The statement has been terminated.
Here is the SQL statements that I run on the original Database:
insert into fichierprix(nomfichier, version, descriptionfr, typeclient,....) values(@NomFichier,'Actuelle', @NomFourFr, 'MembreAcheteur', ....)
And here is my SP that I run on the new imported database:
CREATE PROCEDURE InsertFichierPrix @NomFichier varchar(50), @NomFr varchar(50),@NomAn varchar(50)
AS
declare @NomFourFr varchar(50)
declare @NomFourAn varchar(50)
SET @NomFourFr='liste fournisseur ' + @NomFr
set @NomFourAn='liste fournisseur ' + @NomAn
insert into fichierprix(nomfichier, version, descriptionfr, typeclient,...) values(@NomFichier,'Actuelle', @NomFourFr, 'MembreAcheteur'...)
GO
And here is the execution of my Stored proc on the destination database:
execute insertfichierprix @NomFichier='myfilename2', @NomFr='fournifr1',@NomAn='Fourniang1'
Thank you for helping me.
Id (indentity) Is Increments On Faults.
Jul 20, 2005Hi,When i eg. manually ad entries to a table and, cancels the insert Ms SQLincrement the counter on the ID anyway. Is there a way to avoid thisbehavior?RegardsAnders
View 1 Replies View RelatedMS SQL Server Indentity Jumps
Jul 20, 2005Hi AllI have a table in SQL Server with ID having indentity inrement by one.Table has not any trigger. Frequently ID in the table jumps.Any help !!!Thanks
View 2 Replies View RelatedOrdering Of Newly Added Indentity Value ?
Aug 1, 2007Hi There
Can anyone tell me how an identity column decides what number to give which row.
I always thought that it was in order of the clustered index.
But i have found the following:
If you have Table A with a clustered index(not unique) say on the first 3 columns.
If the table is empty and you add an identity column, then afterward load it with data the value of the identity column seems to match the clustered index.
But if the table has no identity column and it is filled with data, and then you add an identity column the number for the identity column seems to be all over the place.
So basically how does a newly added identity column know what number to give each row, what if the clustered index is not unique? Is it random ?
Thanx
How Can I Create A New Table With Its Column Named From Another Table's One Column Value By Using A Select Sentence?
Sep 27, 2006For example,I have a table "authors" with a column "author_name",and it has three value "Anne Ringer,Ann Dull,Johnson White".Here I want to create a new table by using a select sentence,its columns come from the values of the column "author_name".
can you tell me how can I complete this with the SQL?
A Table/column To Table/column Data Check (was Help Please, SQL Something Simple)
Sep 15, 2006Hi all, I am not over familiar with SQL, I am a VB programmer, simply I need to achieve the following within Enterprise Manager.
I have 2 tables, different designs, different number of rows, I simply need to check whether the contents of a column in the first table is in a column in the second table, just simply a table/column to table/column data check for the same data content.
Easy Peasy for you guys, any help would be appreciated.
How To Create Key Time Column And Key Column For A Case Table And A Nested Table For Time Series Algorithm?
Jun 18, 2007Hi, all experts here,
Thanks for your kind attention.
I want to use time series algorithm to mine data from my case table and nested table. Case table is Date table, while nested table is the fact table. E.g, I want to predict the monthly sales amount for different region (I have region table related to the fact table), how can I achieve this?
Thanks a lot and I hope it is clear for your help and I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
Questions On Key Column In Case Table And Key Time Column In Nested Table Using Time Series Algorithm
Jun 4, 2007Hi, all experts here,
Thank you very much for your kind attention.
I am confused on key column of case table and key time column of nested table by using Time Series algorithm.
In my case, the case table structure is as below:
Territory key text (the ID is actually dimrisk_key, in this case, I use the name column binding to combine the Territory column of case table Dimrisks),
While the nested table structure is as below:
Cal_month key time (in this case, actually the ID is dimdate_key, again, I used name column bining property to bind the Cal_month to the ID)
So my question is, as the key column of case table has been set to be Territory, as a result, does the model training still cover all the cases (rows) based on the ID of the table?
Also, in the nested table, as the key time column has been set to Cal_month rather than Dimdate_key of the nested table, as a result, would the single series based on the cal_month?
Hope it is clear for your advices and help.
And I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
TSQL - Using ALTER TABLE - ALTER COLUMN To Modify Column Type / Set Identity Column
Sep 7, 2007Hi guys,
If I have a temporary table called #CTE
With the columns
[Account]
[Name]
[RowID Table Level]
[RowID Data Level]
and I need to change the column type for the columns:
[RowID Table Level]
[RowID Data Level]
to integer, and set the column [RowID Table Level] as Identity (index) starting from 1, incrementing 1 each time.
What will be the right syntax using SQL SERVER 2000?
I am trying to solve the question in the link below:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2093921&SiteID=1
Thanks in advance,
Aldo.
I have tried the code below, but getting syntax error...
ALTER TABLE #CTE
ALTER COLUMN
[RowID Table Level] INT IDENTITY(1,1),
[RowID Data Level] INT;
I have also tried:
ALTER TABLE #CTE
MODIFY
[RowID Table Level] INT IDENTITY(1,1),
[RowID Data Level] INT;
ALTER TABLE DROP COLUMN LastUpdated Failed Because One Or More Objects Access This Column.
Mar 7, 2008Hi I’m trying to alter a table and delete a column I get the following error. The object 'DF__Morningst__LastU__19EB91BA' is dependent on column 'LastUpdated'.
ALTER TABLE DROP COLUMN LastUpdated failed because one or more objects access this column. I tried deleting the concerned constraint. But the next time I get the same error with a different constraint name. I want to find out if I can dynamically check the constraint name and delete it and then drop the column. Can anyone help.IF EXISTS(SELECT 1FROM sysobjects,syscolumnsWHERE sysobjects.id = syscolumns.idAND sysobjects.name = TablenameAND syscolumns.name = column name)BEGIN EXECUTE ('ALTER TABLE tablename DROP CONSTRAINT DF__SecurityM__DsegL__08C105B8')EXECUTE ('ALTER TABLE tablenameDrop column columnname)ENDGO
Exclude Records From A Table Where ID Column Is Same But Mail Code Column Is Multi-valued
Nov 12, 2012I am trying to exclude records from a table where the ID column is the same but the Mail code Column is multi-valued.For Example: (the table looks like....)
ID Mail_code
111111 XNT
111111 N11
111111 XNC
222222 XNC
222222 XNL
333333 XNC
So, if there is any ID that has a value of XNC, I want to exclude the ID all together from my output regardless of the other values.
SQL Server 2012 :: Subtract / Exclude Value Items From A Column And Add It To Another Column In Same Table
May 26, 2014I got a sales cost and cost amount table for my budget. the sales cost table is getting updated with FOBB items which makes the total incorrect . the FOBB values needs to be moved from the sales cost column to the cost amount column. how can i do it with an SQL script.
View 1 Replies View RelatedCannot Insert The Value NULL Into Column SnapshotDataID, Table ReportServerTempDB.dbo.SessionData; Column Does Not Allow Nul
May 3, 2007I receive this message when I try to run any report. The reportserver and reportservertempdb databases were upgraded using backup/restore from SQL2000 to SQL2005 on a separate server which is running RS2005 . Please help. Thanks
View 1 Replies View RelatedTransact SQL :: SUM Of Two Table Column Base On Another Column Value And SUBTRACT And Join Tables
Oct 14, 2015I have the following table
Table Name EmployeeInformation
EmployeeID EmployeeFirstName EmployeeLastName
  1       |John            |Baker
  2       |Carl             |Lennon
  3       |Marion           |Herbert
Table Name PeriodInformation
PeriodID PeriodStart PeriodEnd
  1     |1/1/14    |12/30/14
  2     |1/1/15    |12/30/15
[code]...
I want a query to join all this tables based on EmployeeID, PeriodID and LeaveTypeIDÂ sum of LeaveEntitlement.LeaveEntitlementDaysNumber based on LeaveTypeID AS EntitleAnnaul and AS EntitleSick and sum AssignedLeave.AssignedLeaveDaysNumber based on LeaveTypeIDÂ Â AS AssignedAnnaul and AS AssignedSick and subtract EntitleAnnaul from AssignedAnnual based on LeaveTypeIDÂ Â AS AnnualBalance and subtract EntitleSick from AssignedSick based on LeaveTypeIDÂ Â AS SickBalance
and the table should be shown as below after executing the query
EmployeeID, EmployeeFirstName, EmployeeLastName, PeriodID, PeriodStart, PeriodEnd, EntitleAnnual, AssignedAnnual, AnnualBalance, EntitleSick, AssignedSick, SickBalance
SQL Server 2012 :: Format Value Of A Column And Insert It Into Another Column Of The Same Table?
Sep 18, 2014A column of a table has values in the format - 35106;#Grandbouche-Cropp, Amy.
I need to format the column data in such a way that only the text after # (Grandbouche-Cropp, Amy) remain in the column.
The text before ;# (35106) should be inserted in to another column of the same table.
Below is the table structure:
create table [HR_DEV_DM].[CFQ_TEST].sp_CFQ_Commercial_Referrals
(
ID int identity,
PromotionalCode nvarchar(4000),
QuoteNumber nvarchar(100),
CreatedBy nvarchar(100),
Created datetime,
ModifiedBy nvarchar(100),
Modified datetime,
CreatedBy_SalesRepSharePointID int,
ModifiedBy_ModBySharePointID int
)
SQL Server 2008 :: Create Table / Set Default Column Value To Value Of Another Column?
Mar 11, 2015when creating a new table. How can I set the default value of the column to equal the value of another column in the same table?
View 5 Replies View RelatedNested Table Key Column Is Not Bound To An Input Rowset Column
Jan 11, 2008Hi!
I have a "little" problem with nested case model:
-- "normal" database:
DROP TABLE [unitInfo] ;
GO
CREATE TABLE unitInfo (
unitID INT PRIMARY KEY
, beginDate SMALLDATETIME
, area VARCHAR(10)
, partSize INT
, y2predict MONEY
) ;
go
INSERT INTO unitInfo
VALUES (1, '2007-02-01', 'home', 42, 10.0) ;
INSERT INTO unitInfo
VALUES (2, '2007-03-05', 'home', 43, 11.0) ;
INSERT INTO unitInfo
VALUES (3, '2007-02-02', 'office', 11, 11.4) ;
INSERT INTO unitInfo
VALUES (4, '2007-02-01', 'office', 10, 33.6) ;
INSERT INTO unitInfo
VALUES (5, '2007-02-01', 'office', 42, 44.1) ;
CREATE TABLE unitLog (
id INT IDENTITY(1, 1)
PRIMARY KEY
, logtime SMALLDATETIME
, -- combination of logtime/unitID is unique
unitID INT
, -- "FK" on unitInfo
m1 FLOAT
, m2 FLOAT
)
INSERT INTO [unitLog]
VALUES ('2007-01-01', 1, 43.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-01', 2, 43.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-01', 3, 63.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-02', 4, 432.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-02', 1, 43.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-03', 1, 423.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-04', 1, 432.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-05', 2, 43.0, 441.0)
INSERT INTO [unitLog]
VALUES ('2007-01-06', 2, 43.0, 4.0)
INSERT INTO [unitLog]
VALUES ('2007-01-06', 3, 43.0, 4.0)
INSERT INTO [unitLog]
VALUES ('2007-01-07', 1, 4.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-08', 1, 3.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-08', 1, 43.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-08', 1, 43.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-09', 2, 143.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-10', 3, 143.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-11', 4, 43.0, 144.0)
INSERT INTO [unitLog]
VALUES ('2007-01-11', 5, 43.0, 144.0)
INSERT INTO [unitLog]
VALUES ('2007-01-12', 2, 43.0, 144.0)
INSERT INTO [unitLog]
VALUES ('2007-01-13', 4, 413.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-14', 4, 43.0, 414.0)
INSERT INTO [unitLog]
VALUES ('2007-01-14', 1, 43.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-20', 1, 43.0, 414.0)
INSERT INTO [unitLog]
VALUES ('2007-01-22', 1, 43.0, 414.0)
-- SSAS:
CREATE MINING STRUCTURE NestedStructure
( unitID LONG KEY, beginDate DATE CONTINUOUS, area TEXT DISCRETE
, partSize LONG CONTINUOUS, y2predict DOUBLE CONTINUOUS
, logdata table ( [id] LONG KEY, unitID LONG CONTINUOUS
, m1 DOUBLE CONTINUOUS, m2 DOUBLE CONTINUOUS
)
)
ALTER MINING STRUCTURE NestedStructure
ADD MINING MODEL nestedModel ( unitID , beginDate REGRESSOR, area , partSize REGRESSOR
,y2predict REGRESSOR PREDICT_ONLY
, logdata ([id] , unitID
, m1, m2
)
) USING Microsoft_Decision_Trees
/* version 1*/
insert into NestedStructure ( unitID, beginDate, area, partSize, y2predict
, logdata(skip,unitID, m1, m2))
openrowset('sqloledb', Server=myserver;Trusted_Connection=yes;,
'Shape {select * FROM mydb.dbo.unitInfo }
Append ( { select id, unitID, m1, m2 from mydb.dbo.unitLog }
Relate unitID to unitID ) as logdata ')
Parsing the query ...
OLE DB error: OLE DB or ODBC error: Syntax error or access violation; 42000.
Parsing complete
Where is the error?
/*version 2*/
CREATE MINING STRUCTURE NestedStructure1
( unitID LONG KEY, beginDate DATE CONTINUOUS, area TEXT DISCRETE
, partSize LONG CONTINUOUS, y2predict DOUBLE CONTINUOUS
, logdata table ( [id] LONG KEY, unitID LONG CONTINUOUS
, m1 DOUBLE CONTINUOUS, m2 DOUBLE CONTINUOUS
)
)
ALTER MINING STRUCTURE NestedStructure1
ADD MINING MODEL nestedModel1 ( unitID , beginDate REGRESSOR, area , partSize REGRESSOR
,y2predict REGRESSOR PREDICT_ONLY
, logdata ([id] , unitID
, m1, m2
)
) USING Microsoft_Decision_Trees
insert into mining structure NestedStructure1 ( unitID, beginDate, area, partSize, y2predict
, logdata(skip,unitID, m1, m2))
Shape {openquery(dsnDB,'select * FROM mydb.dbo.unitInfo') }
Append ( { openquery(dsnDB,'select id, unitID, m1, m2 from mydb.dbo.unitLog') }
Relate unitID to unitID ) as logdata
Parsing the query ...
Error (Data mining):
INSERT INTO error: The '[logdata].[id]' nested table key column is not bound to an input rowset column.
Parsing complete
Remark that combination logtime/unitID is the natural key in unitLog.
"ID" is the surrugate key.
What is wrong here...?