Dear All,
i'm getting an error "index array out of bound" while saving the record.
sql server 2005 with service pack1 system is working fine.
but at client place it is sql server 2005 with SP2. there we are getting error. any help....
windows 2003 sp1 at both the places. only the difference is
in sql server. how can i handle this
Index was outside the bounds of the array
When working with a SQL Server 2005 database and ASP.NET,
I get this error when trying to pull a small amount of data from the database,
Any help would be great, thanks a lot
I work for a large company, so I have to watch the code I release.
On the data tab in reporting services I have just named the stored procedure I wish to run. This Stored procedure expects a datetime parameter. When I select run in the data tab and enter the date (I have tried various different formats) the error "Index was outside the bounds of the array. (system data)". Does anyone know how this can be solved? it seems a simple issue but is turning into a pain to sort out.
View 9 Replies View RelatedI am experiencing of problem relating to the error message on the production SQLServer2012;
Index was outside the bounds of array. (Microsoft.SqlServer.Smo)
When I go to SQL 2012 through SSMS 2005, I get the message Index outside the bounds of array. Will it fix if I install SSMS 2012? Do I need to remove SSMS 2005?
View 1 Replies View RelatedI need to setup log shipping from a 2008 Standard to a 2012 Standard server. I have not found any restrictions for this, however, when I want to connect to the 2012 server on the add secondary server page, I receive the following error:'Index was outside the bounds of the array. (Microsoft.SqlServer.Smo)'.
View 3 Replies View RelatedCurrently underway with migrating from SQL 2005 to SQL2012. I have loaded all of my SSRS reports into Visual Studio 2010 (SQL Server Data Tools) and they all appeared to upgrade fine. I have 150+ reports and I'm in the middle of recreating a tonne of Subscriptions.
However, I have 4 reports that run fine, execute nicely.... but as soon as I click on 'Subscriptions' I get the index bounds array error.
I could attempt to re-create them. It's only 4 reports after all. But it doesn't answer the question, why would the reports execute fine, but unable to create a subscription?
I am getting this error "Index was outside the bounds of the array. (Microsoft.SQLServer.Smo)"..I have downloaded a hotfix, but when I tried running the patch, I was told the expected version is 10.2.4000.0, I am running 10.0.1600.22.I can not locate the correct patch for my version.
Microsoft SQL Server Management Studio
10.0.1600.22 ((SQL_PreRelease).080709-1414 )
Microsoft Data Access Components (MDAC)
6.1.7601.17514 (win7sp1_rtm.101119-1850)
Microsoft MSXML
3.0 6.0Â
Microsoft Internet Explorer
9.11.9600.17041
Microsoft .NET Framework
2.0.50727.5485
Operating System
6.1.7601
I am getting an intermittent problem with executing queries on my workstation. Whenever I execute a couple of store procedures that return a large numbers of rows (200,000 to 500,000 rows) I receive an intermittent error message when running the same sp with the same parameters sometimes the procedure runs fine and returns the result, sometimes I get an error message
Error message is: Index was outside the bounds of the array.
Sometimes
Error message is: Internal connection fatal error.
Sometimes I get a datetime overflow
I also occasionally get these intermittent messages when I execute the native query that the SP wraps.
I have SSMS 2015 SP1 installed on my workstation, the servers are a range of server from 2008 R2 SP2 to 2014 SP1. It feels like a client problem as there are applications connecting to these servers and running the stored procedures without issue...
Hi
If I delete 5 or more columns from a table I get the error "Index was outside the bounds of the array", OK is the only response. I then have to close the report and then open it again.
Easy fix is don't delete more than 5 columns, but my template is setup with 15 columns as it's far quicker to delete them as it is to add them 1 by 1 each time. I've finally got around to looking for a hotfix or something similar but can find no mention of this exact error relating to table column deleting.
Anyone else experience this or know if there is a hotfix for it?
Thanks
I got rid of the .rdl.data files, which apparently has been a successful fix for this problem in the past. Everything worked fine Thursday when I left (I was off Friday - Saturday), but today I get this error for all but one of the reports in the solution when I try to preview the report. BTW, the published stuff works fine. Thanks in advance for any help.
View 6 Replies View RelatedAll,
I am using Reporting Services 2005. One of my reports is getting the following error when I try to export to Excel. It will export to .CSV though.
"Destination array was not long enough. Check destIndex and length, and the array's lower bounds."
Any suggestions would be greatly appreciated. Please copy me at machelle.a.chandler@intel.com.
Machelle
I have a stored procedure that has a paramter that accepts a string of values. At the user interface, I use a StringBuilder to concatenate the values (2,4,34,35,etc.) I would send these value to the stored procedure. The problem is that the stored procedure doesn't allow it to be query with the parameter because the Fieldname, "Officer_UID" is an integer data type, which can't be query against parameter string type.
What would I need to do to convert it to an Integer array?
@OfficerIDs as varchar(200)
Select Officer_UID From Officers Where Officer_UID in (@OfficerIDs)
Thanks
please explain the differences btween this logical & phisicall operations that we can see therir graphical icons in execution plan tab in Management Studio
thank you in advance
Hi,
I am trying to run the following...
select PropertyID, a.*
from Property
inner join dbo.GetPropertyFacilities(Property.PropertyID)as a
on 1=1
where PropertyID = 16
The function GetPropertyFacilities basically takes the PropertyId and returns about 4 numbers which im trying to turn in to a list that looks like....
16 50
16 52
16 45
16 12
The error I'm getting is...
'Msg 4104, Level 16, State 1, Line 1
The multi-part identifier "Property.PropertyID" could not be bound.'
any help would be greatly appreciated.
Thanks
Dear all,
I'm trying to run a query with no luck, I'm getting
"The multi-part identifier "table2.qty" could not be bound."
Here is my query:
select cust_nam , dat ,item_no , desc_lin_1,table2.qty
prc, cost, ret_reas_cod,(table2.qty*cost)
from table1,table2 where hdr_ticket_no = ticket_no and dat >= '20080101' and cat = 'test' and hdr_ticket_no in
( select ticket_no from table1 where dat >= '20080101')
order by dat
I have 2 databases on my sql server. If i choose the other one then this query runs but, if i choose the one that contains the tables I just get that error.Strange part is that it runs under the database that doesn't even contains the table.
If i remove qty from the list then it runs ok. both tables have a qty column. What I'm doing wrong? Any help would be appreciated.
In SQL Server 2000 can we bind objects, like tables, etc. to memory/cache to enhance the performance? This feature is available in Sybase and I am very new to SQL Server.
Thanks.
I am running a script against a couple of databases on my SQL Server 2000 Standard Edition Instance and I am getting the following in the results pane:
"Default bound to column" I have searched the MS Knowledge base and found a couple of vague references to this. Does anyone know why I might be getting this??? the script 'seems' to run fine.. except for the funky error in the results pane. Script is attached. Thank you!!
Hello !
i am new to databases so i would be grateful for your help.
I am using SQL Server 2000 and vb to access and update the records of a database.
I want your opinion about the way i am displaying data.
I have created a form with textboxes etc. which display the fields
of the table.
Now when i load the form i populate a recordset with a
"select ... from... " query.
Then i manually
set
txtfield1.text=cstr(recordset.fields("field1").value)
etc...
If i want to update the table then i have to construct manually the
query.
"update ... set field1='"+ txtfield.text +"' "
if i want to move to a next record i do
recordset.movenext
and then
txtfield1.text=cstr(recordset.fields("field1").value)
again
Is that good or should i use bound controls ?
If multiple users access the same form at the same time (from different computers) will they be locked only when they save (update) data ?
Thank you !
How do I change, or add to, the following code so as to be able to format the display:
this.txtAppointmentDate.DataBindings.Add(new Binding ("Text", dsData.Tables["Results"],"AppointmentDate")
The data is stored in SQL Server as datetime and I want only the date portion to show in the TextBox.
Thanks in advance
Hello Everyone,
I€™m trying to update my Target where the available value of each record is not equal to the Source records. But I€™m getting this error.
The code is below.
UPDATE "ADMINDB"."BED_VISIT"
SET "ADMIT_DATE" = ?,
"ADMIT_ELIG" = ?,
"ADMIT_LOCATION" = ?,
"ADMIT_TIME" = ?,
"ADMIT_TYPE" = ?,
"AVAILABILITY_CDE" = ?,
"BED_ARR_DATE" = ?,
"BED_ARR_TIME" = ?,
"BED_CLASS" = ?,
"BED_CLASS_DATE" = ?,
"BED_NO" = ?,
"BED_OUT_REASON" = ?,
"BED_READINESS" = ?,
"BED_SPECIALTY" = ?,
"CHIEF_COMPLAINT" = ?,
"CONFIDENTIAL" = ?,
"DIS_DATE_EST" = ?,
"DOCTOR_CODE" = ?,
"F_SOUNDEX" = ?,
"HOSP_BED_NO" = ?,
"HOSP_CODE" = ?,
"IN_OUT_DATE" = ?,
"IN_OUT_STATUS" = ?,
"INPUT_BY" = ?,
"INPUT_DATE" = ?,
"INPUT_TIME" = ?,
"ISOLATION_CODE" = ?,
"LENGTH_STAY_E" = ?,
"NO_OF_BEDS" = ?,
"NON_DIS_REASON" = ?,
"NURSE_STATION" = ?,
"ORIG_DIS_DATE" = ?,
"OUTSIDE_REF" = ?,
"PAT_ACC_FLAG" = ?,
"PHONE_EXT" = ?,
"PROB_SPECIALTY" = ?,
"REFER_DEPT" = ?,
"REFER_DOC" = ?,
"REFER_SOURCE" = ?,
"SMOKER_FLAG" = ?,
"SPEC_TRAN_DATE" = ?
WHERE "PATNO" = ?
AND "ADMIT_ELIG" != ?
AND "ADMIT_LOCATION" != ?
AND "ADMIT_TIME" != ?
AND "ADMIT_TYPE" != ?
AND "AVAILABILITY_CDE" != ?
AND "BED_ARR_DATE" != ?
AND "BED_ARR_TIME" != ?
AND "BED_CLASS" != ?
AND "BED_CLASS_DATE" != ?
AND "BED_NO" != ?
AND "BED_OUT_REASON" != ?
AND "BED_READINESS" != ?
AND "BED_SPECIALTY" != ?
AND "CHIEF_COMPLAINT" != ?
AND "CONFIDENTIAL" != ?
AND "DIS_DATE_EST" != ?
AND "DOCTOR_CODE" != ?
AND "F_SOUNDEX" != ?
AND "HOSP_BED_NO" != ?
AND "HOSP_CODE" != ?
AND "IN_OUT_DATE" != ?
AND "IN_OUT_STATUS" != ?
AND "INPUT_BY" != ?
AND "INPUT_DATE" != ?
AND "INPUT_TIME" != ?
AND "ISOLATION_CODE" != ?
AND "LENGTH_STAY_E" != ?
AND "NO_OF_BEDS" != ?
AND "NON_DIS_REASON" != ?
AND "NURSE_STATION" != ?
AND "ORIG_DIS_DATE" != ?
AND "OUTSIDE_REF" != ?
AND "PAT_ACC_FLAG" != ?
AND "PHONE_EXT" != ?
AND "PROB_SPECIALTY" != ?
AND "REFER_DEPT" != ?
AND "REFER_DOC" != ?
AND "REFER_SOURCE" != ?
AND "SMOKER_FLAG" != ?
AND "SPEC_TRAN_DATE" != ?
The error:
[OLE DB Command [20874]] Error: An OLE DB error has occurred. Error code: 0x80040E10. An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80040E10 Description: "ORA-01008: not all variables bound".
Please help me in finding the solution out.
HI Gurus,
Trying to alter an existing Trigger on an insert event on one of our tables. The following sql generates: "Msg 4104, Level 16, State 1, Procedure insxECSIBHEADER, Line 4 The multi-part identifier "INSERTED.PROJECT" could not be bound."
Here's the SQL itself:
set QUOTED_IDENTIFIER ONgoALTER TRIGGER [insxECSIBHEADER] ON [dbo].[xECSIBHeader] AFTER INSERT AS BEGIN IF SUBSTRING(INSERTED.[PROJECT],4,2) = 'DR' BEGIN UPDATE xECSIBHEADER SET xECSIBHEADER.[IBNUMBER] = LEFT(xECSIBHEADER.[PROJECT],2) + 'D' + Cast(xECSIBHEADER.[IBHeaderKey] AS VarChar(15)) FROM INSERTED INS INNER JOIN xECSIBHEADER ON xECSIBHEADER.[IBHeaderKey] = INS.[IBHeaderKey] WHERE INS.[IBNUMBER] IS NULL END ELSE BEGIN UPDATE xECSIBHEADER SET xECSIBHEADER.[IBNUMBER] = LEFT(xECSIBHEADER.[PROJECT],2) + Cast(xECSIBHEADER.[IBHeaderKey] AS VarChar(15)) FROM INSERTED INS INNER JOIN xECSIBHEADER ON xECSIBHEADER.[IBHeaderKey] = INS.[IBHeaderKey] WHERE INS.[IBNUMBER] IS NULL END
END
I am trying to call a userdefined function and it excepts and date like 4/15/2007 but when i call my function i get an error
the multipart identifier datetime,now could not be bound
and this is my codePublic Function GetPeriods()
Dim myconnection As New SqlConnection(System.Configuration.ConfigurationManager.AppSettings(APPSETTING_DBCONNECTION))
Dim query1 As String = "Select dbo.udf_Quarter(Datetime.Now)" 'Max(PeriodId) From Period"
myconnection.Open()
Dim MaxPeriodId As Integer
Dim cmd As New SqlCommand(query1, myconnection)
cmd.CommandType = CommandType.Text
MaxPeriodId = cmd.ExecuteScalar()
Response.Write(MaxPeriodId)
Session("PeriodId") = MaxPeriodId
Return (MaxPeriodId)
End Function any help will be appreicated
Regards,
Karen
I am trying to execute a query in SQL SERVER 2005 for calculating days difference for each. I created a function because there are a lot of calculations. In SPeriods table I have 4 fields that I want to pass as parameters in the table-value function TFC_date_diff, but I receive the error "The multi-part identifier "CC.start_period_no" could not be bound.
Is there a solution for this ?
SELECT CC.start_period_no, CC.end_period_no, CC.start_year, CC.end_year, TFC_date_diff.dates_differnceFROM dbo.[SPeriods] AS CC CROSS JOIN dbo.TFC_date_diff(CC.start_period_no, CC.end_period_no, CC.start_year, CC.end_year) AS TFC_date_diff_1
Thanks a lot in advance!
Hi,
I am looking for detailed information with eaxmples, about creating extended stored procedures using sp_getbindtoken, sp_bindsession for our ASP.NET application.
Microsoft has very less info on that.
If anyone has some information or link to the article related to Using Bound Connections. please help me out.
Thanks,
Anu
I am doing a little research on Google about this topic and I ran intothis thread:http://groups.google.com/group/micr...dc13d4ee6758966I read SQL Server MVP Louis Davidson's post saying:"Actually they are more likely to drop the concept of bound defaults.Constraints are the standard way to do this, and really should be the wayyou create defaults anyhow."Even I read in the Microsoft SQL Server Introduction (SQL 7 bookpage 244, however we're using SQL Server 2000):"Constraints define rules regarding the values allowed in columns and arethe standard mechanism for enforcing integrity, preferred over triggers,rules, and defaults. They are also used by the query optimizer to improveperformance in selectivity estimation, cost calculations, and queryrewriting."Why constraint defaults are better? The second sentence about constraintshaving better optimization, I am guessing they don't mean this aboutDefault Constraints, rather the other type of constraints?Because I don't see how a Default Constraint have anything to do withperformance? Isn't default only to do with new records being created?At work we are setting all tables' columns to have constraint defaultsof 0 or ' ' (space character) in order not to have any column with theNULL value. Therefore we have dozens of files containing statements like:alter table TABLE1 add constraint TABLE1_ID_DFDEFAULT(' ') FOR IDgoalter table TABLE1 add constraint TABLE1_QUANTITY_DFDEFAULT(0) FOR QUANTITYgoFirst I was thinking to create 3 SQL Defaults called:DefaultZeroDefaultSpaceDefaultDateand then bind these defaults to all the columns of all tables excludingprimary keys. After creating the tables I would enumerate throughall the columns and bind one of these three Defaults based on theirdatatype:number = DefaultZerotext type = DefaultSpacedate type = DefaultDateAnd then unbind the ones that we specifically need to specify otherdefault values.So my question is should I do this by using sp_binddefault or stickwith using Default Constraints inside a table/columns loop code?Thank you
View 10 Replies View RelatedHi All ,
i am getting this multi-part identifier not found error
followingis my stored procedure
ALTER PROCEDURE [dbo].[Ab_LP]
@gyr char(4),
-- 'A', --'S', only submitted will be returned;
--A=All, or any other letter other than 'S', all will b returned;
@ExONo char(1)='A'
AS
DECLARE @sql VARCHAR(1500)
SET @sql = 'SELECT LTRIM(RTRIM(t1.Last_Name))+'',''+LTRIM(RTRIM(t1.First_Name)) as Name,t2.emaddr as Email,t3.* FROM namesTable as t2,PersonalTable as t1'
IF (@ExONo='S')
SET @sql = LTRIM(RTRIM(@sql)) + ',LePAb AS t3 WHERE t3.emaddr = t2.emaddr AND t2.code = ''ABC'' AND t1.Emplid=t2.Emplid '
ELSE
SET @sql = LTRIM(RTRIM(@sql)) + ' LEFT JOIN LePAb AS t3 ON
t3.emaddr=t2.emaddr WHERE t2.code = ''ABC'' AND t1.Emplid=t2.Emplid '
IF (@gyr <> 0)
SET @sql = LTRIM(RTRIM(@sql)) + ' AND t2.gyr='+@gyr
ELSE
SET @sql = LTRIM(RTRIM(@sql)) + ' AND t1.Code = ''ABC'' '
SET @sql = LTRIM(RTRIM(@sql)) + ' ORDER BY Name'
print @sql
EXEC (@sql)
I am geting an error as
The multi-part identifier "t2.emaddr" could not be bound.
i have tried all the possible tricks but in vain.
plz help..
thanks in advance
hi,
i don't know what the prob with my code:
create table #tmpAllocation (
[ResourceID] int,
[Resource] varchar(50),
[WorkTeamID] int,
[WorkTeam] varchar(100),
[LineModuleId] int,
[AccountId] varchar(100),
[VpIdentifier] int,
[DivisionId] varchar(100),
[GroupId] int,
[Account/Version] varchar(100),
[version_id] int,
[1] numeric(9,5),[2] numeric(9,5),[3] numeric(9,5),[4] numeric(9,5),[5] numeric(9,5), numeric(9,5),[7] numeric(9,5), numeric(9,5),[9] numeric(9,5),
[10] numeric(9,5),[11] numeric(9,5),[12] numeric(9,5),[13] numeric(9,5),[14] numeric(9,5),[15] numeric(9,5),[16] numeric(9,5),[17] numeric(9,5),[18] numeric(9,5),
[19] numeric(9,5),[20] numeric(9,5),[21] numeric(9,5),[22] numeric(9,5),[23] numeric(9,5),[24] numeric(9,5),[25] numeric(9,5),[26] numeric(9,5),[27] numeric(9,5),
[28] numeric(9,5),[29] numeric(9,5),[30] numeric(9,5),[31] numeric(9,5),[32] numeric(9,5),[33] numeric(9,5),[34] numeric(9,5),[35] numeric(9,5),[36] numeric(9,5),
[37] numeric(9,5),[38] numeric(9,5),[39] numeric(9,5),[40] numeric(9,5),[41] numeric(9,5),[42] numeric(9,5),[43] numeric(9,5),[44] numeric(9,5),[45] numeric(9,5),
[46] numeric(9,5),[47] numeric(9,5),[48] numeric(9,5),[49] numeric(9,5),[50] numeric(9,5),[51] numeric(9,5),[52] numeric(9,5),[53] numeric(9,5))
insert into #tmpAllocation
select msp_resources.emp_code as [ResourceID],
msp_resources.res_name as [Resource],
WorkTeam.workteam_id as [WorkTeamID],
acc.account_name + ' / ' + WorkTeam.workteam_name as [WorkTeam],
line_module.line_module_id as [LineModuleId],
acc.account_id as [AccountId],
vp.vp_identifier as [VpIdentifier],
division.division_id as [DivisionId],
division.group_id as [GroupId],
Account.account_name + ' / ' + Version.version_name as [Account/Version],
Version.version_id as [version_id],
Version_Resources_Allocation.pct_allocation [pct_allocation]
from WorkTeam, Version_Resources_Allocation
pivot (sum(pct_allocation )
for Version_Resources_Allocation.week IN ([1],[2],[3],[4],[5],,[7],,[9],[10],[11],[12],[13],[14],[15],[16],[17],[18],[19],[20],[21],[22],[23],[24],[25],[26],[27],[28],[29],[30],[31],[32],[33],[34],[35],[36],[37],[38],[39],[40],[41],[42],[43],[44],[45],[46],[47],[48],[49],[50],[51],[52], [53])) as pvt
inner join Version_Resources_Allocation on WorkTeam.workteam_id = Version_Resources_Allocation.workteam_id
inner join WorkTeam_Resources_Assignments on WorkTeam_Resources_Assignments.resource_id = Version_Resources_Allocation.resource_id
and WorkTeam_Resources_Assignments.workteam_id = Version_Resources_Allocation.workteam_id
inner join calendar on calendar.year = WorkTeam_Resources_Assignments.year
and calendar.month = WorkTeam_Resources_Assignments.month
and calendar.year = Version_Resources_Allocation.year
and calendar.week = Version_Resources_Allocation.week
inner join Version on Version.version_id = Version_Resources_Allocation.version_id
inner join Account on Account.account_id = Version.account_id
--hierarchy joins
inner join line_module on line_module.line_module_id = WorkTeam.line_module_id
inner join Account as acc on acc.account_id = line_module.account_id
inner join vp on vp.vp_identifier = acc.vp_identifier
inner join division on division.division_id = vp.division_id
--Resources joins
inner join msp_resources on msp_resources.emp_code = Version_Resources_Allocation.resource_id
where Version_Resources_Allocation.resource_id in (select top 100 percent emp_code from #staffEmployees where id between ((@quota * (@pageIndex - 1) + 1)) and (@quota * @pageIndex) order by res_name)
and
(
(Version_Resources_Allocation.year = @startYear and Version_Resources_Allocation.week >= @startWeek and Version_Resources_Allocation.week <= (case when @startYear = @endYear then @endWeek else @maxWeeksInFirstYear end))
or
(Version_Resources_Allocation.year = @endYear and Version_Resources_Allocation.week <= @endWeek and Version_Resources_Allocation.week >= (case when @startYear = @endYear then @startWeek else 1 end))
)
and
(
pct_availability!=0 or (pct_availability is null and staffing_pct_availability!=0)
)
and
(
(WorkTeam_Resources_Assignments.year = @startYear and WorkTeam_Resources_Assignments.month >= @startMonth and WorkTeam_Resources_Assignments.month <=
case when @startYear = @endYear then @endMonth else 12 end
)
or
(WorkTeam_Resources_Assignments.year = @endYear and WorkTeam_Resources_Assignments.month <= @endMonth and WorkTeam_Resources_Assignments.month >=
case when @startYear = @endYear then @startMonth else 1 end
)
)
--and pct_allocation is not null
group by msp_resources.emp_code,
msp_resources.res_name,
WorkTeam.workteam_id,
WorkTeam.workteam_name,
line_module.line_module_id,
acc.account_id,
acc.account_name,
vp.vp_identifier,
division.division_id,
division.group_id,
Account.account_name + ' / ' + Version.version_name,
acc.account_name+ ' / ' + WorkTeam.workteam_name,
Version.version_id
I get:
The multi-part identifier "WorkTeam.workteam_id" could not be bound.
The multi-part identifier "WorkTeam.line_module_id" could not be bound.
Why?
Thanks,
Omri
I have a SqlDataSource that I need to remove the first 3 rows from before it is bound to a GridView. How would I go about doing this?
(if I could remove them at the db level in the sproc I would, but right now that is not an option - so I need to do it once I've already received the data)
Thanks.
I have several tables in a deployed database in which the primary key is of type int, and autoincrements by 1 each time a record is added. My question is, since ints are 32-bit, what happens when its value reaches 4,294,967,296? I know that seems like an extrememly large amount of records, but when we imported the data into the database it started at key value 1,000,000. I don't know how to make it use lower numbers which are currently not being used (numbers below 1,000,000), and I am worried I will have problems when I reach the upper bound. What kind of problems could this cause? Should I change the primary key's type?Thanks!
View 2 Replies View RelatedWhich the column name is the c.Documenttype
here is my T-sql code..
SELECT [Hourly]
,count(case when C.Documenttype=1 THEN '1' END) as EDI
,count(case when C.Documenttype=2 THEN '2' END) as SI
,count(case when C.Documenttype=1 THEN '1' END) + count(case when C.Documenttype=2 THEN '2' END) as GrandTotal
[Code] ....
I try to automate ans insert (that ok) and update jobs
but these part is not working I got the following error
The multi-part identifier "t2.customerid" could not be bound.
any idea'll be welcomed I'm not so good in programming and sql
update [ADOS].[dbo].[Customers]
set t2.companyname = t1.companyname
where t2.customerid = (SELECT t1.companyname
FROM [Northwind].[dbo].[Customers] T1 inner join [ADOS].[dbo].[Customers] T2 on (t1.customerid = t2.customerid and t1.companyname <>t2.companyname))
Hello,
I am running
Microsoft SQL Server 2005 - 9.00.2047.00 (Intel X86)
Apr 14 2006 01:12:25
Copyright (
c) 1988-2005 Microsoft Corporation
Developer Edition on Windows NT 5.1 (Build 260
0: Service Pack 2)
on Windows.
using jdbc
<driver name="com.microsoft.sqlserver.jdbc.SQLServerDriver" tag="sqlserver"
url="jdbcqlserver://[host]:[port];DatabaseName=[dbname];user=[user];password=[password]">
<jar subdir="sqlserver" name="sqljdbc.jar" />
</driver>
I print out the following info to make sure I get the right driver:
'JDBC driver details' , ' driver class name=com.microsoft.sqlserver.jdbc.SQLServerDriver
driver majorVersion=1
driver minorVersion=1
driver a genuine JDBC CompliantTM driver=true'
I execute the following query
SELECT p.cust_id,
p.stock_units FROM dbo.customer_portfolio p
WHERE p.stock_price = ?
and get this message:
com.microsoft.sqlserver.jdbc.SQLServerException: The multi-part identifier "p.stock_price" could not be bound. stack trace: [com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
com.microsoft.sqlserver.jdbc.SQLServerParameterMetaData.<init>(Unknown Source)
com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.getParameterMetaData(Unknown Source)
If I change it to:
SELECT cust_id,
stock_units FROM dbo.customer_portfolio
WHERE stock_price = ?
i.e. do not use correlation names, it executes as expected. Is there anything wrong with using correlation names in the query ? or is it a bug ?. Any help will be welcome.