I am new to sql server and we have sql server 2000
DBCC INDEXDEFRAG ( 0, PS_ORD_LINE, PS_ORD_LINE )
DBCC INDEXDEFRAG ( 0, PS_ORD_LINE, PS0ORD_LINE )
DBCC INDEXDEFRAG ( 0, PS_ORD_LINE, PSAORD_LINE )
DBCC INDEXDEFRAG ( 0, PS_ORD_LINE, PSBORD_LINE )
DBCC INDEXDEFRAG ( 0, PS_ORD_LINE, PSCORD_LINE )
DBCC INDEXDEFRAG ( 0, PS_ORD_LINE, PSEORD_LINE )
DBCC INDEXDEFRAG ( 0, PS_ORD_LINE, PSFORD_LINE )
Please somebody give me for sql server 2005 scripts for above.
I've noticed a huge transaction log size after having run an
index defragmentation. Does a defrag get written to the transaction
log really? (Assuming the full recovery model.)
Hi,
After issuing an index rebuild on a primary key index (and updating statistics), the index still shows a scan density of 12.5%!
Any ideas on why the rebuild doesn't seem to do anything on the fragmentation levels?
I'm using sql 2005
Thanx
I know the shortcut to 'defragging' the database to eliminate and
reclaim 'whitespace' in data and index pages is to setup a maintenance
plan. This doesn't work for me for two reasons:
1. I like to know how things work.
2. I can not create maintenance plans with my hosted provider.
I use the following T-SQL to rebuild all indexes on all tables:
-- exec sp_MSforeachtable "DBCC DBREINDEX ('?', ' ', 90)
But, does that not only address indexes? What about getting whitepace
back from data in tables themselves?
Am I over-thinking this?
When you're paying for SQL by the MB and generate a lot of data (with a
fair amount of churn) you want to keep it optimized and efficient,
right?
Does anyone know if dbreindex and index defrag ideally perform the same function? I have been told that index defrag does not hold locks on a table when executed and dbreindex does. Other than this is there any difference between the two functions? My understanding was that dbreindex reindexes the data stored in a table for faster reads and index defrag removes purged data. Am I correct? I am currently running both functions on my SQL server and was advised that I really only need to run the index defrag job. Is this advise correct?
View 6 Replies View RelatedI have a clustered index which shows as having a fragmentation level of 66% according to sys.dm_db_index_ physical_ stats.avg_ fragmentation_ in_ percent.
But no matter what I try the fragmentation level doesn't budge. And yes I'm updating the statistics after each attempt.Its not a huge issue the table only has 348 records. I'm testing a fixing fragmentation maintenance script. In Ironing out the syntax of my script I've fixed the fragmentation of indexes of over 65 % anyway..I've come across and index that I can't defragment. I've tried
ALTER INDEX ALL ON [GRIDINFO] REBUILD WITH (FILLFACTOR = 90)
I've tried
ALTER INDEX ALL ON [GRIDINFO] REORGANIZE
I've tried
DBCC INDEXDEFRAG (MYDATABASE, 'GRIDINFO', PK__GRIDINFO__3214EC2721F5FC7F);
The command complete successfully yet the avg_fragmentation_in_percent doesn't change. The table also has a nonclustered index. I've gleaned through all the statements of 'this will have no effect if' but so far I've not spotted a reason why this index won't defrag.The script has been modified to remove schema and database names for the forum.
dbcc showcontig('GRIDINFO','IDX_GRIDINFO1') with tableresults , all_levels
go
DBCC SHOWCONTIG ('GRIDINFO')
go
sp_helpindex 'GRIDINFO'
[code]....
I am currently re-writing an overnight index defrag procedure and would like to audit indexes in my database - logging the before defrag action" avg fragmentation value and "after defrag action" frag value in an audit table. This will be for all databases on the server. I have completed the vast majority of it (cycling though all the databases, detecting which indexes need reorganising or rebuilding and inserting the information into a table) but I cannot get the audit values working properly. For example, a sample row in my audit table would look like this:
ID Name DB Table frag_before frag_after
1 Index2 DB1 Table6 70.33456 0.03
2 Index7 DB1 Table9 45.98 1.2567etc
On a 2008r2 server, I ran the frag utility against master and msdb and noticed they were severely fragmented.
Is it ok to defrag them using the standard Alter Index command?
We have a new database with cdc enabled on all of its tables. This causes the index maintenance task to fail with following message:
"Executing the query "EXEC DBName.dbo.IndexDefrag_sp" failed with the following error: "The unique index 'PK_TableName' on source table '[dbo].[TableName]' is used by Change Data Capture. To alter or drop the index, you must first disable Change Data Capture on the table. The transaction ended in the trigger. The batch has been aborted.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly" We would like to run the index maintenance without losing the cdc data. We plan on installing SP2 on SQL Server 2008 R2 soon, would that solve the issue? Disabling the cdc prior to index maintenance and then re-enabling back upon completion; would delete the data as I found in most discussions, but we would like to retain it.
I have been reading many things on the internet and I wanted to create a thread asking my question here. We currently do all the re-indexing and show contig's etc to maintain my sql data and to ensure everything is good to go there.
My question is, what about the physical drive and data. We house our mdf's on a raid 1_0 and our ldfs on raid 5. I am wondering if I need to defrag these drives b/c if not am i impacting my I/O on that box. If so should I stop the sql service so that it does not corrupt SQL data? Any help on this topic would be great.
-patrick
I have a large table with no PK but has other indexes. How to defrag the table (not the indexes)? Do I need to drop and re-create the table or something?
Thanks.
Folks
Our sql server machine is badly in need of a defrag however I'm a bit weary of doing this as I'm really not sure of the implications or indeed how to do it.
I'm really not a server type of person so any assistance would be gratefully received. If anyone can explain it to me like I'm a 5 year old then that would probably be best!
Cheers
Hello,
I am working with a very large db (850+gig) that is in desperate need of defragging. I am familiar with DBCC Reindex and DBCC IndexDefrag but am concerned that these processes will take an extremely long time to run. Has anyone had any experience with any 3rd party tools that better/faster then DBCC? Or any ideas or suggestions how best to attack this? Among the many tables with large footprints and millions of rows, I have 3 tables with reserved space over 100g also 3 tables with over 500Mil rows (1 tbl with > 1bil rows). This is a 24x7 db.
Thanks in advance for any ideas and suggestions
Jeff
Hi
Can I de-frag the Drive in which the Data files & Log Files of the SQl Server Exists ???
Please Advice.
Thanks
Isn't there any way to automate Windows defrag? Isn't there any undocumented parameters for DEFRAG.EXE?
Canada DBA
I#ve been doing disaster recovery on a web box that died today.
So I thought I'd do some "downtime" maintenance on the DB server
I ran a BDREINDEX on all tables, all indexes. (I know this is the 2000 way, but I assume its as good as the proper 2005 way??).
5 minutes on a 10GB database. Not bad!
I checked the DEFRAG and UPDATE STATS processes that run overnight.
They are basically defragging only tables with SHOWCONTIG indicating fragmentation. And then doing an UPDATE STATISTICS WITH FULLSCAN on all tables
That is taking an average of 30 minutes ...
Is DBREINDEX the equivalent of an UPDATE STATISTICS WITH FULLSCAN, or is it in some way a smaller-sample version?
I'm wondering why I don't just lock the DB and do a REINDEX of everything in 5 minutes ...
Kristen
I'd like to build a process that will identify all the tables in a database with a scan density less than 100% and generate 'dbcc dbreindex' statements for them. The 'dbcc showcontig' command displays the information I want but I don't know how to access this information from within a script. Any ideas out there?
View 5 Replies View RelatedHow do we defrag indexed views? Can any one give me a query to loop thru all the indexed views in the database and find out the fragmentation levels and also defrag them?
Thanks in advance!
Hi everyone, I am fairly new with SQL Server and need a little bit of help in regards to boosting my SQL servers performance. I have been advised that defraging SQL Server will definitely help solve my issue however I have never performed this function before. Can someone please help guide me through the necessary steps to execute this task. Thanks in advance.
View 5 Replies View RelatedIs there any easy way to defrag a table with no clustered idx other than bcp out then back in ? (SQL 2000)Actually I have a 100GB db that I deleted data from other tables, about 10GB worth, but access to the table in question (38GB) seems to have slowed down dramatically, Or does the entire disk need to be defragmented and a bcp out/in would be a waste of time on this table ?I run an index defrag every night, reindex weekly.Thanks.
View 14 Replies View RelatedThis script was based on the original posted here: http://sql-server-performance.com/Community/forums/p/20584/114940.aspx#114940
I use the REORGANIZE option of ALTER INDEX. It's default is ONLINE, no matter what the engine edition and makes for simpler code.
I also make heavy use of my own logging tables, which are included at the bottom of the sp.
Please, feel free to comment. I like getting feedback about my scripts and it seems rarely that happens...
USE Admin
GO
IF EXISTS (SELECT [name] FROM Admin.sys.objects WHERE [name] = 'usp_DB_DeFrag' AND TYPE = 'P')
DROP PROCEDURE dbo.usp_DB_DeFrag
GO
CREATE PROCEDURE dbo.usp_DB_DeFrag (@DBName sysname, @Percentage float = 10)
-- EXEC Admin.dbo.usp_DB_Defrag @DBName = 'FooDB', @Percentage = 10
AS
/******************************************************************************
**Name: Admin.dbo.usp_DB_DeFrag.sql
**
**Description: Defragment indexes using REORGANIZE for online operation.
**Record historical fragmentation information to a permanant table
**for trend/history analysis.
**
**Depends on: SQL2005 >= SP2 due to object_name() usage. See BOL for details.
**Admin.dbo.Process_Log - Table
**Admin.dbo.FragTracking - Table
**
** TODO: Open to suggestions...
**
**Author: G. Rayburn <grayburn@---.com>
**
**Date: 10/02/2007
**
*******************************************************************************
**Modification History
*******************************************************************************
**
**Initial Creation: 10/02/2007 G. Rayburn <grayburn@---.com>
**
*******************************************************************************
**
******************************************************************************/
SET NOCOUNT ON;
DECLARE @DynFragList varchar(1024)
, @DynDBAlter varchar(256)
, @DynDefragDriver varchar(max)
, @DynUpdateStats varchar(1024)
, @OrigRecoveryModel nvarchar(128)
, @Process_Name varchar(150)
, @Message varchar(256)
, @Error int
-- Cursor objects:
, @SchemaName sysname
, @ObjectName sysname
, @IndexName sysname
, @IndexType nvarchar(60)
, @AvgFrag int
, @PageCount int
, @RecordCount int
--, @GhostRecordCnt bigint
--, @Partition int
;
-- DEBUG:
--SET @DBName = 'FooDB'
--SET @Percentage = 10;
SET @Process_Name = 'usp_DB_Defrag run on [' + @DBName + ']';
-- Ensure that @DBName is a valid db for db_id() usage.
IF (db_id(@DBName)) IS NULL
BEGIN
SET @Message = '[' + @DBName + '] is not a valid database on ' + @@SERVERNAME + ', please check your spelling and try again.'
INSERT INTO Admin.dbo.Process_Log
VALUES (getdate(), @Process_Name, 'ERROR', 9999, @Message)
RETURN
END;
-- Record startup message:
INSERT INTO Admin.dbo.Process_Log
VALUES (getdate(), @Process_Name, 'INFO', 0, '[START] - usp_DB_Defrag @DBName = [' + @DBName + '], @Percent = ' + CONVERT(varchar(3),@Percentage) + '.')
-- Check & alter recovery model if neccessary:
SET @OrigRecoveryModel = (SELECT CONVERT(varchar(55),DATABASEPROPERTYEX(@DBName, 'Recovery')))
IF @OrigRecoveryModel = 'FULL'
BEGIN
SET @DynDBAlter = 'ALTER DATABASE [' + @DBName + ']
SET RECOVERY BULK_LOGGED';
EXEC (@DynDBAlter);
SET @Error = (SELECT @@ERROR)
IF @Error = 0
BEGIN
INSERT INTO Admin.dbo.Process_Log
VALUES (getdate(), @Process_Name, 'SUCCESS', CONVERT(varchar(15),@Error), 'Successfully set database [' + @DBName + '] to BULK_LOGGED recovery model.')
END;
ELSE
BEGIN
INSERT INTO Admin.dbo.Process_Log
VALUES (getdate(), @Process_Name, 'ERROR', CONVERT(varchar(15),@Error), 'Failed to set database [' + @DBName + '] to BULK_LOGGED recovery model.')
END;
END;
ELSE
BEGIN
INSERT INTO Admin.dbo.Process_Log
VALUES (getdate(), @Process_Name, 'INFO', 0, 'Database [' + @DBName + '] is in ' + @OrigRecoveryModel + ' recovery model so no need to change it.')
END;
-- Temp table of initial DBCC results:
CREATE TABLE #_FragList
(
ObjectName varchar(100)
, [Object_ID] int
, Index_ID int
, Partition_Number int
, IndexType varchar(60)
, alloc_unit_type_desc nvarchar(60)
, avg_fragmentation_in_percent float
, avg_fragment_size_in_pages float
, avg_page_space_used_in_percent float
, fragment_count bigint
, page_count bigint
, record_count bigint
, forwarded_record_count bigint
, ghost_record_count bigint
);
INSERT INTO #_FragList
SELECT
LEFT(object_name([object_id], db_id(@DBName)),100)
, [object_id]
, index_id
, partition_number
, index_type_desc
, alloc_unit_type_desc
, avg_fragmentation_in_percent
, avg_fragment_size_in_pages
, avg_page_space_used_in_percent
, fragment_count
, page_count
, record_count
, forwarded_record_count
, ghost_record_count
FROM sys.dm_db_index_physical_stats (db_id(@DBName), NULL, NULL, NULL, 'DETAILED')
WHERE avg_fragmentation_in_percent >= @Percentage
AND index_id >= 1
AND page_count >= 1000
ORDER BY -- Ensure Clustered indexes are rebuilt first.
[object_id]
, index_id ASC;
CREATE INDEX IDX_ObjNameIndexID ON #_FragList (ObjectName, Index_id);
-- Historical tracking:
INSERT INTO Admin.dbo.FragTracking
SELECT @DBName
, ObjectName
, [Object_ID]
, Index_ID
, Partition_Number
, IndexType
, alloc_unit_type_desc
, avg_fragmentation_in_percent
, avg_fragment_size_in_pages
, avg_page_space_used_in_percent
, fragment_count
, page_count
, record_count
, forwarded_record_count
, ghost_record_count
, getdate()
FROM #_FragList
ORDER BY [Object_ID]
, Index_ID ASC;
-- Create & populate Temp table to drive defrag operations from.
CREATE TABLE #_DefragDriver
(
IdentID int IDENTITY(1,1)
, SchemaName sysname
, ObjectName sysname
, IndexName sysname
, IndexType varchar(60)
, avg_fragmentation_in_percent float
, page_count int
, record_count int
, ghost_record_count bigint
, partition_number int
);
SET @DynDefragDriver = '
USE [' + @DBName + ']
INSERT INTO #_DefragDriver
SELECT schema_name(so.schema_id)
, fl.[ObjectName]
, si.[name]
, fl.IndexType
, fl.avg_fragmentation_in_percent
, fl.page_count
, fl.record_count
, fl.ghost_record_count
, fl.partition_number
FROM #_FragList fl
, [' + @DBName + '].sys.indexes si
, [' + @DBName + '].sys.objects so
WHERE object_id(fl.ObjectName) = si.object_id
AND fl.index_id = si.index_id
AND object_id(fl.objectname) = so.object_id
AND si.is_disabled = 0
AND si.allow_page_locks = 1
GROUP BY so.schema_id
, fl.[ObjectName]
, fl.[object_id]
, fl.index_id
, si.[name]
, fl.IndexType
, fl.avg_fragmentation_in_percent
, fl.page_count
, fl.record_count
, fl.ghost_record_count
, fl.partition_number
ORDER BY fl.[object_id]
, fl.index_id ASC; '
EXEC (@DynDefragDriver);
-- Do the defrag.
DECLARE curDBFrag CURSOR
FOR
SELECT SchemaName
, ObjectName
, IndexName
, IndexType
, avg_fragmentation_in_percent
, page_count
, record_count
--, ghost_record_count
--, partition_number
FROM #_DefragDriver
ORDER BY IdentID ASC;
OPEN curDBFrag
FETCH NEXT FROM curDBFrag INTO @SchemaName, @ObjectName, @IndexName, @IndexType, @AvgFrag, @PageCount, @RecordCount --, @GhostRecordCnt, @Partition
WHILE (@@fetch_status <> -1)
BEGIN
IF (@@fetch_status <> -2)
BEGIN
-- ALTER INDEX operations:
SET @Message = 'Table: [' + @ObjectName + '] with record count: ' + CONVERT(varchar(15),@RecordCount) + ' and page count: ' + CONVERT(varchar(15),@PageCount) + '. Index: [' + @IndexName + '] of type: ' + @IndexType + ' is ' + CONVERT(varchar(5),@AvgFrag) + '% fragmented.';
SET @DynFragList = 'ALTER INDEX [' + @IndexName + '] ON [' + @DBName + '].[' + @SchemaName + '].[' + @ObjectName + '] REORGANIZE;'
EXEC (@DynFragList);
SET @Error = (SELECT @@ERROR)
IF @Error = 0
BEGIN
INSERT INTO Admin.dbo.Process_Log
VALUES (getdate(), @Process_Name, 'SUCCESS', CONVERT(varchar(15),@Error), @Message)
END;
ELSE
BEGIN
INSERT INTO Admin.dbo.Process_Log
VALUES (getdate(), @Process_Name, 'ERROR', CONVERT(varchar(15),@Error), @Message)
END;
-- UPDATE STATISTICS operations:
SET @Message = 'UPDATE STATISTICS [' + @SchemaName + '].[' + @ObjectName + '] [' + @Indexname + '];'
SET @DynUpdateStats = '
USE [' + @DBName + ']
UPDATE STATISTICS [' + @SchemaName + '].[' + @ObjectName + '] [' + @Indexname + ']; '
EXEC (@DynUpdateStats);
SET @Error = (SELECT @@ERROR)
IF @Error = 0
BEGIN
INSERT INTO Admin.dbo.Process_Log
VALUES (getdate(), @Process_Name, 'SUCCESS', CONVERT(varchar(15),@Error), @Message)
END;
ELSE
BEGIN
INSERT INTO Admin.dbo.Process_Log
VALUES (getdate(), @Process_Name, 'ERROR', CONVERT(varchar(15),@Error), @Message)
END;
-- Friendly WAITFOR operation:
WAITFOR DELAY '00:00:05.000'
END;
FETCH NEXT FROM curDBFrag INTO @SchemaName, @ObjectName, @IndexName, @IndexType, @AvgFrag, @PageCount, @RecordCount --, @GhostRecordCnt, @Partition
END;
CLOSE curDBFrag
DEALLOCATE curDBFrag;
-- Reset FULL recovery model.
IF @OrigRecoveryModel = 'FULL'
BEGIN
SET @DynDBAlter = 'ALTER DATABASE [' + @DBName + ']
SET RECOVERY FULL';
EXEC (@DynDBAlter);
SET @Error = (SELECT @@ERROR)
IF @Error = 0
BEGIN
INSERT INTO Admin.dbo.Process_Log
VALUES (getdate(), @Process_Name, 'SUCCESS', CONVERT(varchar(15),@Error), 'Successfully reset database [' + @DBName + '] back to FULL recovery model.')
END;
ELSE
BEGIN
INSERT INTO Admin.dbo.Process_Log
VALUES (getdate(), @Process_Name, 'ERROR', CONVERT(varchar(15),@Error), 'Failed to reset database [' + @DBName + '] back to FULL recovery model.')
END;
END;
-- Record complete message:
INSERT INTO Admin.dbo.Process_Log
VALUES (getdate(), @Process_Name, 'INFO', 0, '[COMPLETE] - usp_DB_Defrag @DBName = [' + @DBName + '], @Percent = ' + CONVERT(varchar(3),@Percentage) + '.');
-- Cleanup:
DROP TABLE #_FragList;
DROP TABLE #_DefragDriver;
-- Dependancies:
----
----USE [Admin]
----GO
---- DROP TABLE Admin.dbo.FragTracking
----CREATE TABLE FragTracking
----( TrackID int IDENTITY(1,1) -- PRIMARY KEY CLUSTERED
----, DBName sysname
----, ObjectName sysname
----, Object_ID int
----, Index_ID int
----, Partition_Number int
----, IndexType varchar(60)
----, alloc_unit_type_desc nvarchar(60)
----, avg_fragmentation_in_percent float
----, avg_fragment_size_in_pages float
----, avg_page_space_used_in_percent float
----, fragment_count bigint
----, page_count bigint
----, record_count bigint
----, forwarded_record_count bigint
----, ghost_record_count bigint
----, SnapDate datetime
----);
----
----USE [Admin]
----GO
---- DROP TABLE Admin.dbo.Process_Log
----CREATE TABLE [dbo].[Process_Log](
----[MessageID] [int] IDENTITY(1,1) NOT NULL,
----[Date] [datetime] NOT NULL,
----[Process_Name] [varchar](150) NULL,
----[Severity] [varchar](15) NULL,
----[ErrorCode] [int] NULL,
----[Message] [varchar](255) NULL,
---- CONSTRAINT [PK_Process_Log] PRIMARY KEY CLUSTERED
----(
----[Date] ASC,
----[MessageID] ASC
----)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [Admin_Data]
----) ON [Admin_Data]
----GO
GO
SQL 2000We took SQL Server offline last night and defragged the SAN. Should wereindex or will be be okay ?Thanks,Craig
View 2 Replies View Relatedplease explain the differences btween this logical & phisicall operations that we can see therir graphical icons in execution plan tab in Management Studio
thank you in advance
We have a Windows 2003 R2 server running Sql 2005. Should we stop the sql server engine prior to running the "Defrag" utiltiy that comes with the OS? (Maybe we should also disable the NIC card on that machine too....?)
TIA,
barkingdog
I am using Full Text Index to index emails stored in BLOB column in a table. Index process parses stored emails, and, if there is one or more files attached to the email these documents get indexed too. In result when I'm querying the full text index for a word or phrase I am getting reference to the email containing the word of phrase if interest if the word was used in the email body OR if it was used in any document attached to the email.
How to distinguish in a Full Text query that the result came from an embedded document rather than from "main" document? Or if that's not possible how to disable indexing of embedded documents?
My goal is either to give a user an option if he or she wants to search emails (email bodies only) OR emails AND documents attached to them, or at least clearly indicate in the returned result the real source where the word or phrase has been found.
Dear All.
We had Teradata 4700 SMP. We have moved data from TD to MS_SQL SERVER 2003. records are 19.65 Millions.
table is >> Order_Dtl
Columns are:-
Client_ID varchar 10
Order_ID varchar 50
Order_Sub_ID decimal
.....
...
..
.
Pk is (ClientID+OrderId+OrderSubID)
Web Base application or PDA devices use to initiate the order from all over the country. The issue is this table is not Partioned but good HP with 30 GB RAM is installed. this is main table that receive 18,0000 hits or more. All brokers and users are using this table to see the status of their order.
The always search by OrderID, or ClientID or order_SubNo, or enter any two like (Client_ID+Order_Sub_ID) or any combination.
Query takes to much time when ever server receive more querys. some orther indexes are also created on the same table like (OrderDate, OrdCreate Date and Status)
My Question are:-
Q1. IF Person "A" query to DB on Client_ID, then what Index will use ? (If any one do Query on any two combination like Client_ID+Order_ID, So what index will be uesd.? How does MS-SQL SERVER deal with these kind of issues.?
Q2. If i create 3 more indexes on ClientID, ORderID and OrdersubID. will this improve the performance of query.if person "A" search record on orderNo so what index will be used. (Mind it their would be 3 seprate indexes for Each PK columns) and composite-Clustered index is also available.?
Q3. I want to check what indexes has been used? on what search?
Q4. How can i check what table was populated when, or last date of update (DML)?
My Limitation is i Dont Create a Partioned table. I dont have permission to do it.
In Teradata we had more than 4 tb record of CRM data with no issue. i am not new baby in db line but not expert in sql server 2003.
I am thank u to all who read or reply.
Arshad
Manager Database
Esoulconsultancy.com
(Teradata Master)
10g OCP
My SSIS package is running very slow taking so much time to execute, One task is taking 2hr for inserting 100k records, i have disabled unused index still it is taking time.I am rebuilding/Refreshing indexes and stats once in month if i try to execute on daily basis will it improve my SSIS Package performance?
View 2 Replies View RelatedKeep getting this error when positioning to the last page of a report.
Using Server 2003...SqlRpt Svcs 2000 sp2
Detail error msg:
Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown. (rrRenderingError) Get Online Help
Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown.
Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: index
Anyone have any suggestions? Any way to find out what collection is blowing?...or where parameter name: index comes from?
hello friends
i have table1 and 200 coulumn of table1 :) i have 647.600 records. i entered my records to table1 with for step to code lines in one day :)
i select category1 category2 and category3 with select code but i have just one index.. it is productnumber and it is primarykey..So my select code lines is so slow.. it is 7-9 second.. how can i select in 0.1 second ? Should i create index for category1 and category2 and category3 ? But i dont know create index.. My select code lines is below.. Could you learn me and show me index for it ?? or Could you learn me and show me fast Select code lines and index or etc ??? Also my search code line have a dangerous releated to attaching table1 with hackers :)
cheersi send 3 value of treview1 node and childnode and child.childnode to below page.aspx :)
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Not Me.IsPostBack Then
If Request("TextBox1") IsNot Nothing ThenTextBox1.Text = Request("TextBox1")
End If
If Request("TextBox2") IsNot Nothing ThenTextBox2.Text = Request("TextBox2")
End If
If Request("TextBox3") IsNot Nothing ThenTextBox3.Text = Request("TextBox3")
End If
End If
Dim searchword As String
If Request("TextBox3") = "" And Request("TextBox2") = "" Then
searchword = "Select * from urunlistesi where kategori= '" & Request("TextBox1") & "'"
End If
If Request("TextBox3") = "" Then
searchword = "Select * from urunlistesi where kategori= '" & Request("TextBox1") & "' and kategori1= '" & Request("TextBox2") & "'"
End If
If Request("TextBox3") <> "" And Request("TextBox2") <> "" And Request("TextBox1") <> "" Then
searchword = "Select * from urunlistesi where kategori= '" & Request("TextBox1") & "' and kategori1= '" & Request("TextBox2") & "' and kategori2= '" & Request("TextBox3") & "'"
End If
SqlDataSource1.SelectCommand = searchword
End Sub
Hi,
I'm running a merge replication on a sql2k machine to 6 sql2k subscribers.
Since a few day's only one of the merge agents fail's with the following error:
The merge process could not retrieve generation information at the 'Subscriber'.
The index entry for row ID was not found in index ID 3, of table 357576312, in database 'PBB006'.
All DBCC CHECKDB command's return 0 errors :confused:
I'm not sure if the table that's referred to in the message is on the distribution side or the subscribers side? A select * from sysobjects where id=357576312 gives different results on both sides . .
Any ideas as to what is causing this error?
Hi everyone,
When we create a clustered index firstly, and then is it advantageous to create another index which is nonclustered ??
In my opinion, yes it is. Because, since we use clustered index first, our rows are sorted and so while using nonclustered index on this data file, finding adress of the record on this sorted data is really easier than finding adress of the record on unsorted data, is not it ??
Thanks
I have a clustered index that consists of 3 int columns in this order: DateKey, LocationKey, ItemKey (there are many other columns in this data warehouse table such as quantities, prices, etc.).
Now I want to add a non-clustered index on just one of the other columns, say LocationKey, like this:
CREATE INDEX IX_test on TableName (LocationKey)
I understand that the clustered index keys will also be added as key columns to any NC indexes. So, in this case the NC index will also get the other two columns from the clustered index added as key columns. But, in what order will they be added?
Will the resulting index keys on this new NC index effectively be:
LocationKey, DateKey, ItemKey
OR
LocationKey, ItemKey, DateKey
Do the clustering keys get added to a NC index in the same order as they are defined in the clustered index?
Quick question about the primary purpose of Full Text Index vs. Clustered Index.
The Full Text Index has the purpose of being accessible outside of the database so users can query the tables and columns it needs while being linked to other databases and tables within the SQL Server instance.
Is the Full Text Index similar to the global variable in programming where the scope lies outside of the tables and database itself?
I understand the clustered index is created for each table and most likely accessed within the user schema who have access to the database.
Is this correct?
I am kind of confused on why you would use full text index as opposed to clustered index.
Thank you
Goldmember