I'm seeing this error in my application log. Not quite sure how it started happening all of a sudden. I'm not quite sure where to start on this one.
Any suggestions greatly appreciated!
Thanks,
Mike123
Exception information:
Exception type: SqlException
Exception message: Operation failed. The index entry of length 1007 bytes for the index 'tblMessage25' exceeds the maximum length of 900 bytes.
I have some code I build 2 weeks ago which I’ve been running daily but it’s suddenly stopped working with the following error.
“The table "tbl_Intraday_Tmp" has been created, but its maximum row size exceeds the allowed maximum of 8060 bytes. INSERT or UPDATE to this table will fail if the resulting row exceeds the size limit” When I google this there seems to be a related to tables with vast numbers of columns.
My table tbl_Intraday_tmp is relatively small. It has 7 columns. 1 of varchar(5), 3 of decimal(9,3) and 2 of decimal(18,0). The bit I’m puzzled with is it was working and stopped.
I don’t recall changing anything but I wouldn’t rule that out. I ‘ve inspected the source files and I don’t believe they have changed either.
DECLARE
@FileName varchar(50),
@Path varchar(50),
@SqlCmd varchar(1000)
= '',
@ASXCode varchar(5),
@Offset decimal(18,0),
[code]....
Hi All,I have created a table in sql server 2000 where at the time of creatingit, the row size excced 8K. I understand why I get the warning below:The table 'tbl_detail' has been created but its maximum row size(12367) exceeds the maximum number of bytes per row (8060). INSERT orUPDATE of a row in this table will fail if the resulting row lengthexceeds 8060 bytes.However, when I call a stored procedure from my ASP Code, which returnsme this warning, my ASP page displays the warning and does not move tothe next line.What can I do not to get this warning? How do I turn off warningmessages? I tried to wrap my stored procedure call code within SETNOCOUNT ON and SET NOCOUNT OFF but that didn't help.Any help would be really appreciated,Thanks,Boris
View 6 Replies View RelatedHow do you solve this problem
replicated exceeds configured maximum 65536
Hi All
I am running a script which has a table creation. The table gets created, but with the below warning.
Warning: The table 'PropertyInstancesAudits' has been created but its maximum row size (8190) exceeds the maximum number of bytes per row (8060). INSERT or UPDATE of a row in this table will fail if the resulting row length exceeds 8060 bytes.
Structure is as under:
Code SnippetCREATE TABLE [dbo].[PropertyInstancesAudits] (
[PIA_ClassID] [uniqueidentifier] NOT NULL ,
[PIA_ClassPropertyID] [uniqueidentifier] NOT NULL ,
[PIA_InstanceID] [uniqueidentifier] NOT NULL ,
[PIA_Value] [sql_variant] NOT NULL ,
[PIA_StartModID] [bigint] NOT NULL ,
[PIA_EndModID] [bigint] NOT NULL ,
[PIA_SuserSid] [varbinary] (85) NULL
) ON [PRIMARY]
GO
How should I get rid of this?
Hi guys, is there any way to solve my problem as title ? Assuming my stored proc is written as below :
CREATE PROC TEST
@A VARCHAR(8000) = '1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,...,5000'
AS
BEGIN
DECLARE @B nvarchar(MAX);
SET @B = 'SELECT * FROM C WHERE ID IN ( ' + @A + ')'
EXECUTE sp_executesql @B
END
GO
Hi,
I'm running a merge replication on a sql2k machine to 6 sql2k subscribers.
Since a few day's only one of the merge agents fail's with the following error:
The merge process could not retrieve generation information at the 'Subscriber'.
The index entry for row ID was not found in index ID 3, of table 357576312, in database 'PBB006'.
All DBCC CHECKDB command's return 0 errors :confused:
I'm not sure if the table that's referred to in the message is on the distribution side or the subscribers side? A select * from sysobjects where id=357576312 gives different results on both sides . .
Any ideas as to what is causing this error?
Friends,
I was trying to find out the maximum length of a row in a column.I was using SQL65.I will appreciate if any one can give me the query to find this.
Thanks in advance
Hello
Can anyone tell me what the maximum length sql statement SQL CE can run is?
Thank you
Gráinne
Is there a maximum number of characters in an expression?
thx
Helen
Hi,
I am using SQLSERVER2000.
When storing data in to database ,it is taking/storing only 255 characters for all the datatypes like nvarchar,nchar,char,ntext,text, etc...
I need to increase the maximum length of a field which takes 1000 characters & more.
I already increased the field length to 2000, but it is taking/storing only 255 characters.
Please help me in this................
I am using a SProc to update some fields in a database. The field I am updating is a comment field. When I pass the parameter by doing a Command.ExecuteNonQuery I get an exception that says my parameter is greater than 128. The field it is updating is a nvarchar with a length of 500. I found an article on Microsoft's website that is alluding to the fact that a "name" cannot be greater than 128. How else can I do an update of this size? I would like to use a SProc. I am still learning SQL 2000 and MSDE so this may be an easy fix. Here is the exception I am getting: "The identifier that starts with 'My data thats needs to be updated to the database' is too long. Maximum length is 128." -VBJB
View 2 Replies View RelatedI try to Update a field of a table using this statementUPDATE Table SET field="Forget.......(long text)" WHERE id=1and I get this error The identifier that starts with 'Forget your bus
excursions. Marta Patiño takes a trip out of this world at La
Laguna's Science Museum.
In April 2001, De' is too long. Maximum length is 128.What is wrong?
Does anybody happen to know the maximum number of characters that can be returned by FOR XML?
Tell me it is not 8000.
I did check BOL, and I skimmed some msdn articles.
I have a report that has 14 user supplied parameters. When I added a 15th parameter and deployed the report, I get an error of Maximum Request Length Exceeded when I try to set up a subscription to the report. All of the subscriptions on the report are failing now and users are getting rather upset.
Please help! How do I get rid of the Maximum Request Length Exceeded error?
Thanks!
I know that system_user can return different types of usernames based on the authentication method used to connect to the database. I am trying to nail down a standard field width for audit columns that store the return value from system_user but I can't find definitive information about the return type of the function. Does anyone know the maximum length of the return value from the system_user function and if its an nvarchar, varchar, nchar, etc.?
Thanks.
I am executing a SELECT statement that has about 500 characters of literal characters concatenated with the contents of a field from a table. I am then storing the result to be run as dynamic SQL. I am finding that when run this as select statement in query analyzer, the last part of the literal gets truncated. When I run it as a cursor and store it in a varchar(1000) variable and print the variable everything works fine. In addition when I put the select statement in a stored procedure and return this to a ADO recordset, the resultset is fine as well. But running the stored procedure in query analyzer truncates the results as well. The issue seems to be getting the results of the SELECT in query analyzer. Even running the stored procedure in the SQL area of Enterprise Manager returns a proper result. Has anyone heard of a maximum return from a select in query analyzer?
View 4 Replies View RelatedHi, i'm trying to run a stored procedure:"EXECUTE dbname.dbo.spGid 'KFT', '0000000011,0000000012', 'merch,DSMT','2006-02-01 00:00:00', '2006-02-28 00:00:00'"and gives me this error:The identifier that starts with"EXECUTE dbname.dbo.spGid 'KFT', '0000000011,0000000012', 'merch,DSMT','2006-02-01 00:00:00', '2006-02-28 00:00:00'"is too long. Maximum length is 128.Anyone could help?
View 1 Replies View RelatedHi,
Is there a way in-code to determine the maximum length of a Integration Services Data Type.
I need to determine based on the data type what the maximum length of a column is IN-CODE.
However, the column.Length property only gives me a length for DT_WSTR and DT_STR values. This is the only property that would seem to remotely give me the right answer.
I need to know the maximum lengths in columns for DT_BOOL, DT_CY, DT_I2, DT_I4, DT_I8, DT_NUMERIC, and DT_UI1. I can always hard-code these values into my program, but that makes no sense. There has to be some sort of way to determine what the maximum possible length of these values are.
For numeric values I could use the column.Precision value but that still leaves with with a lot of data types without a maximum length.
Hi All,
Is there a way to check the data type and the maximum length of a field?
I'm running into this error message when passing in a few records in particular to a function, the only difference I could find is that these recods have about 60k characters on the field that I'm passing to a function.
is there a max lenght for passing to a function?
select function ( field) as results
It's been working fine until today and all of the related fields are declared as nvarchar(max)
Thank you.
Greetings. Today I was testing the sql backup/restore functions on ourprimary server. I was able to backup my database without any problemsbut when I tried to restore it, I received an error "Could not find theindex entry for RID '3610200101a03cc4b49d8bbc84bac50cbe042cecf76' inindex page (1:40), index ID 0, database 'walkthrough'." Thinking thatdata had been corrupted somehow I tried another database and received asimilar error for that database. In the past, our service provider hasattempted to restore data to this server and the restore failed do toanother data corruption. The problem is, I can't find out where thecorruption is located or how to fix it.When I open the restored database in enterprise manager, it returns theabove error and is unable to get a listing of my tables. In queryanalyzer I am able to view my data but receive the index error when Iattempt to look at the information_schema data. When I try to run a DBCCCHECKDB on the corrupted database it reports 0 errors and 0inconsistencies.So my diagnosis of the problem is that something is corrupting my systemtables and that problem shows up whenever I try to restore data from abackup. There could be a hardware failure but I believe the failurewould affect more then just the sql system tables. Can anyone offer anyadvice on how to find the corruption?Thank you in advanceRichard Bailey*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies View RelatedI am trying to deploy a shape file map of the world with 100 random data points from my dataset but get this error: "exception running the extensions specified in the config file. ---> Maximum request length exceeded". I can preview this fine in SSDT. I have read various solutions which involve editing the config file but I don't have permissions to get to these files. Is there any way to amend the maximum length either through SSMS or SSDT? If not how can I make my map size small enough to deploy? It is a very simple shape file with no colours etc and I am passing random 100 data points to it from my dataset.
View 4 Replies View RelatedI am upgrading from Access, where you can only have 10 fields in a primary key or unique index. Is this also the limit in SQL Server? If not, what is the limit?
Thanks for any help on this.
What is the reason behind Index key length limitation upto 900 bytes?
View 10 Replies View RelatedI have a dataset that I need to search for a maximum value of a specified index.
Example of dataset:
Heat Index Heat # Frame Window
1 584 110 110
1 584 102 109
1 584 95 106
1 584 190 112
2 586 100 100
2 586 150 120
2 586 170 130
2 586 112 126
I need to find the maximum value of Frame for each heat and the maximum value of Window for each heat. As you can see each heat has several data points.
Is there a way I can send the dataset to a function? I could then use a loop to test for the maximum of Frame and the maximum of Window for each heat.
Could I use an array?
i have one col in a nonclusted index which is bigint 8 bytes follwoing result shows min_record_size_in_bytes and max_record_size_in_bytes is 20 that is 12+8 page size is 8 kB. does that mean a record will use 20 bytes in a page or it will only use the space equalent to data stored in the col.what i have seen is page count is same weather i put some data in the col or null
select * From sys.dm_db_index_physical_stats(9,343,null,null,'DETAILED')
database_idobject_idindex_idpartition_numberindex_type_descalloc_unit_type_descindex_depthindex_
levelavg_fragmentation_in_percentfragment_countavg_fragment_size_in_pagespage_countavg_page_
space_used_in_percentrecord_countghost_record_countversion_ghost_record_countmin_
record_size_in_bytesmax_record_size_in_bytesavg_record_size_in_bytesforwarded_
record_countcompressed_page_count
999208304101HEAPIN_ROW_DATA102.9527559055118116253.187540514.196627131208358500016516516500
9992083041141NONCLUSTERED INDEXIN_ROW_DATA202553.21699.3544600938967585000202020NULL0
9992083041141NONCLUSTERED INDEXIN_ROW_DATA2101115.510254509513221600262626NULL0
Query hints exceed maximum command buffer size of 1023 bytes(1029 bytes input).
i tried a long query in BCP because i have to insert a character to one of its fields.
hope somebody had encountered and solved this (sql server 2000). thanks in advance..
I am using MS SQL server 2008, and i have a table with 350 columns and when i m trying to create one more column its giving error with below message -
Warning: The table XXX has been created, but its maximum row size exceeds the allowed maximum of 8060 bytes.
INSERT or UPDATE to this table will fail if the resulting row exceeds the size limit.
how can i resolve this?
is there any way or a tool to identify if in procedure the Parameter length was declarated less than table Column length ..
I have a table
CREATE TABLE TEST001 (KeyName Varchar(100) ) a procedure
CREATE PROCEDURE SpFindNames ( @KeyName VARCHAR(40) )
AS
BEGIN
SELECT KeyName FROM TEST001
WHERE KeyName = @KeyName
END
KeyName = @KeyName
Here table Column with 100 char length "KeyName" was compared with SP parameter "@KeyName" with length 40 char ..
IS there any way to find out all such usage on the ALL Procedures in the Database ?
For those of you who would like to reference my exact issue, I'm dealing with the RSExecution SSIS package at the "Update Parameters" data flow task, at the Script Component.
The script tries to split parameter data into name and value. Unfortunately, I have several reports that are passing parameters that are very large. One example has over 65,000 characters all in the normal "¶mname=value&parm2=value..." format.
The code in the script works fine until it gets to one of these very large parameter sets. I have figured out what is causing the issue. Here's some code:
Dim paramBlob as Byte()
paramBlob = Row.BlobColumn.GetBlobData(0, Row.BlobColumn.Length)
The second parameter of the .GetBlobData function takes an INTEGER as its count! Therefore, no matter what kind of datatype I pass to the string that the script will later split, it will be limited to 32767 characters.
THIS IS A PROBLEM!!!
Does anyone know a workaround for this issue? I need all of the parameter data to be reported, and I would hate to have to skip over rows like this. Also, if I'm missing something, please fill me in!
Thanks for your help in advance,
LOSTlover
I've read that SSIS tries to do all transformations in memory as a way of enhancing processing speed. What happens though if the amount of data processed exceeds the available RAM? Are raw files then used (similar to staging tables) or is an error generated?
Barkingdog
I am trying to narrow down this problem. Basically, I added 3 columns to my article table. It holds the article id, article text, author and so on. I tested my program before adding the additional field to the program. The program works fine and I can add an article, and edit the same article even though it skips over the 3 new fields in the database. It just puts nulls into those columns.So, now I have added one of the column names I added in the database to the code. I changed my businesslogic article.vb code and the addarticle.aspx, as well as the New article area in the addartivle.aspx.vb page. The form now has an additional textbox field for the ShortDesc which is a short description of the article. This is the problem now: The command parameters.length is 9 and there are 10 parameter values. Right in the middle of the 10 values is the #4 value which I inserted into the code. It says Nothing when I hover my mouse over the code after my program throws the exception in 17 below. Why is command parameters.length set to 9 instead of 10? Why isn't it reading the information for value 4 like all the other values and placing it's value there and calculating 10 instead of 9? Where are these set in the program? Sounds to me like they are hard coded in someplace and I need to change them to match everything else. 1 ' This method assigns an array of values to an array of SqlParameters.2 ' Parameters:3 ' -commandParameters - array of SqlParameters to be assigned values4 ' -array of objects holding the values to be assigned5 Private Overloads Shared Sub AssignParameterValues(ByVal commandParameters() As SqlParameter, ByVal parameterValues() As Object)6 7 Dim i As Integer8 Dim j As Integer9 10 If (commandParameters Is Nothing) AndAlso (parameterValues Is Nothing) Then11 ' Do nothing if we get no data12 Return13 End If14 15 ' We must have the same number of values as we pave parameters to put them in16 If commandParameters.Length <> parameterValues.Length Then17 Throw New ArgumentException("Parameter count does not match Parameter Value count.") 18 End If19 20 ' Value array21 j = commandParameters.Length - 122 For i = 0 To j23 ' If the current array value derives from IDbDataParameter, then assign its Value property24 If TypeOf parameterValues(i) Is IDbDataParameter Then25 Dim paramInstance As IDbDataParameter = CType(parameterValues(i), IDbDataParameter)26 If (paramInstance.Value Is Nothing) Then27 commandParameters(i).Value = DBNull.Value28 Else29 commandParameters(i).Value = paramInstance.Value30 End If31 ElseIf (parameterValues(i) Is Nothing) Then32 commandParameters(i).Value = DBNull.Value33 Else34 commandParameters(i).Value = parameterValues(i)35 End If36 Next37 End Sub ' AssignParameterValues38 39 40 41
View 2 Replies View Related