Hi,
How to insert a string value with quotes in it in SQL Server?
This is not working:
insert table_name values(`abc`d`)
I tried to put escape in front of `, still failed.
Thanks in advance.
-Jenny Wang
My code results in SQL statements like the following one - and it gives an error because of the extra single-quotes in 'it's great':
UPDATE Comments SET Comment='it's great' WHERE UserID='joe' AND GameID='503'
Here's the error I get when I try this code in SQL Server:
Msg 102, Level 15, State 1, Line 1Incorrect syntax near 's'.Msg 105, Level 15, State 1, Line 1Unclosed quotation mark after the character string ''.
I need to know how I can insert a string such as 'it's great' - how do I deal with the extra quotes issue? is there a way to ecape it like this 'it/'s great' ? This doesn't seem to work.
Here's the code that generates the SQL. I'm using a FCKeditor box instead of a TextBox, but I got the same error when I was using the TextBox:
string strUpdate = "UPDATE Comments SET Comment='";strUpdate = strUpdate + FCKeditor1.Value;//strUpdate = strUpdate + ThisUserCommentTextBox.Text;strUpdate = strUpdate + "' WHERE UserID='";strUpdate = strUpdate + (string)Session["UserID"];strUpdate = strUpdate + "'";strUpdate = strUpdate + " AND GameID='";strUpdate = strUpdate + Request.QueryString["GameID"];strUpdate = strUpdate + "'";
SqlConnection myConnection = new SqlConnection(...);SqlCommand myCommand = new SqlCommand(strUpdate, myConnection);
try{myCommand.Connection.Open();myCommand.ExecuteNonQuery();}catch (SqlException ex){ErrorLabel.Text = "Error: " + ex.Message;
}finally{myCommand.Connection.Close();}
I'm using SQL Server 2005 and ASP.NET 2.0
Much thanks
I'm constructing a SQL string that needs single quotes in the WHERE clause. How do I encapsulate them in a string variable. I looked into ESCAPE and SET QUOTED_IDENTIFIER, but i don't really see any examples using string Concatenation. I'm trying to filter out the zls (0 length strings)
This doesn't work (all single quotes):
@sqlString = ' SELECT * FROM myTbl '
@sqlString = @sqlString + 'WHERE fld1 <>'' '
Thanks,
Carl
When users enter text into a textbox, to be INSERTed into my table, SQL Server throws an error if their text contains a single quote.
For example, if they enter "It's great!" then it causes this error:Error: Incorrect syntax near 's'. Unclosed quotation mark after the character string ''.
How can I allow text with single quotes to be inserted into the table?
Here's my code:
string strInsert = "INSERT INTO [Comments] ([GameID], [UserID], [Comment]) VALUES (@GameID, @UserID, @Comment)";
SqlConnection myConnection = new SqlConnection(<<myconnectionstuff>>);SqlCommand myCommand = new SqlCommand(strInsert, myConnection);
myCommand.Parameters.Add( "@GameID", Request.QueryString["GameID"] );myCommand.Parameters.Add( "@UserID", (string)Session["UserID"] );myCommand.Parameters.Add( "@Comment", ThisUserCommentTextBox.Text );
try {myCommand.Connection.Open();myCommand.ExecuteNonQuery();}
catch (SqlException ex) {ErrorLabel.Text = "Error: " + ex.Message;}
finally {myCommand.Connection.Close();}
I have a problem with inserting a string with single quotes. For instance,
string testme = "we don't have anything";
insert into tableone (buff) values ("'" + testme + "'");
I get an error with the word "don't" with single quote. But if I delete the single quote "dont" then it inserts okay. Is is a bug in sql 2005? Please help. Thanks.
blumonde
I am reading data from another data source and storing it in the sqlce database. Some of the string values I'm trying to insert into the database have single quotes in the string (i.e. Johnny's Company). When I try to insert the values with the single quotes, it throws an exception. The code I use to insert the records is as follows:
cmd.CommandText = "INSERT sy_company " +
" (company_id, company, co_name, companyid) " +
"VALUES(" +
"'" + dtSYCompany.Rows[x]["company_id"] + "'," +
"N'" + dtSYCompany.Rows[x]["company"] + "'," +
"N'" + dtSYCompany.Rows[x]["co_name"] + "'," +
"'" + dtSYCompany.Rows[x]["companyid"] + "')";
cmd.ExecuteNonQuery();
When the company name (co_name) has a single quote in it, I get the error. How do I write the insert statement so it will work even though the value being inserted into co_name has a single quote in it?
Thanks so much!
I had a procdure in SQL 7.0 in which I am using both single quote and double quotes for string values. This proceudreused to work fine in SQL 7.0 but when I upgraded SQL 7.0 to SQL 2000, this proceudre stopped working. When I changed the double quotes to single quotes, it worked fine.
Any Idea why ??
Thanks
Manish
I was having some issues with converting this @BeginDate(which is passed in as a datetime) correctly and someone suggested the syntax below. It enloses it in triple single quotes. That seemed to work, but it also seems to work with single quotes too. Can someone explain the use of triple single quotes in stored procedures?
''' + CAST(@BeginDate as Varchar(30)) + '''
Help please! I have a problem with passing quotes in a parameter. I am using asp.net (vb) passing a parameter to a stored procedure.
Here is an example of the parameter I am passing from the asp page.
strIndexFilesFound = " 'file1.pdf', 'file2.pdf' "
.......Parameters("@IndexFilesFound").Value = strIndexFilesFound
And the Procedure parts
...
@IndexFilesFound char(100) = ''
....
WHERE IndexFile IN(@IndexFilesFound)
The result should be that the where query receives the data like this.
WHERE IndexFile IN ('file1.pdf', 'file2.pdf')
The number of files passed is unknown for any given query.
Much Thanks!
I have 2 SQL 6.5 databases on separate servers. Server A replicates a text field into a table on server B.
On server A the field contains text similar to THIS IS FRED'S HOUSE. After replication to Server B it looks like THIS IS FRED''S HOUSE. The distribution database also has it as THIS IS FRED''S HOUSE. Using ODBC trace I cannot see the value being passed in the text field as it is displayed as a question mark e.g. ?.
How do I fix the problem ?
Thanks
Hi,
I need to have an varchar value with single quotes. For eg: the below code throws compilation error.
Declare @val VARCHAR(20)
SELECT @val = ''+name+''
print @val
Error: Invalid column 'name'
I want to print name enclosed with single quotes. Please guide me.
Regards,
Sam
Hello Everyone!
I am having a problem with updating a password within a table. Below is the old and new password that needs to be updated.
Old2"3("-"3#@(%P="''_DD@D*
New :"I+)#]*1#E,%R-''7^,TEA$X&^O_-68DIK,@
Below is the query that I am trying to run. I believe my problem is becuase of the Single Quotes found within both the old and new password.
I have tried to escape the single quotes, @local_variable, CHAR(39) and other ways of playing with the string. I cannot seem to find a solution.
If you were to ignore the update statement, the SELECT statement would return no results even though the PRINT statement displays the required data.
This is what baffles me and why I cannot run the UPDATE statement, becuase of course, nothing would be updated since no results were returned.
Can anyone offer their assistance?
Thank you in advance.
__________________________________________________ _______________
DECLARE
@OLD_PASSWORD VARCHAR(50),
@NEW_PASSWORD VARCHAR(50)
-- 2"3("-"3#@(%P="''_DD@D* ///// The old password.
SET @OLD_PASSWORD = '2"3("-"3#@(%P="' + CHAR(39) + CHAR(39) + '_DD@D*'
-- :"I+)#]*1#E,%R-''7^,TEA$X&^O_-68DIK,@ ///// The new password.
SET @NEW_PASSWORD = ':"I+)#]*1#E,%R-' + CHAR(39) + CHAR(39) + '7^,TEA$X&^O_-68DIK,@'
PRINT @OLD_PASSWORD
PRINT @NEW_PASSWORD
SELECT *
FROM Credentials
WHERE
Is_Active = 1 AND
[Password] = @OLD_PASSWORD
/* Attempt to update the password table. */
UPDATE Credentials
SET [Password] = @NEW_PASSWORD
WHERE [ID] IN
(SELECT [ID]
FROM Credentials
WHERE
Is_Active = 1 AND
[Password] = @OLD_PASSWORD )
Hi,
I want to pass a query to SQL Server 2005 through the table adapter query.
Some of the variables with have single quotes e.g. He's
I know with PHP/MySQL Addslashes() is used.
What is the alternative for C#?
Thanks.
I'm trying to build a dynamic sql statement in a stored procedurre and can't get the like statement to work. My problem is with the single quote. for example LIKE '%@searchvalue%'. This works fine: select * from view_searchprinters where serialnumber like '%012%' But I can't figure out how to create this in a stored procedure. What syntax should I use for the line in bold?SET NOCOUNT ON;DECLARE @sn varchar(50)SET @sn = N'012'DECLARE @sql nvarchar(4000)SELECT @sql = 'select top 10 * from view_searchprinters' + ' WHERE 1 = 1 'SELECT @sql = @sql + ' 'IF @sn IS NOT NULL SELECT @sql = @sql + 'and serialnumber LIKE ''' + '%' + '@sn' + '%' + ''' 'EXEC sp_executesql @sql, N'@sn varchar(50)', @sn
View 8 Replies View RelatedI have a problem with inserting a string with single quotes. For instance,
string testme = "we don't have anything";
insert into tableone (buff) values ("'" + testme + "'");
I get an error with the word "don't" with single quote. But if I delete the single quote "dont" then it is okay. Is is a bug in sql 2005? Please help. Thanks.
blumonde
hello,
i have a problem to concatinte sigle quotes to variable value
declared a variable name @a as varchar(30)
set @a='keerthi'
now i would like to concatinate sigle quotes in front of string and back of string.
set @a= "'" + @a + "'"
here it is giving error.
plese give me some solution
thanks
ravi
I'm trying to pass through a SQL statement to an Oracle database usingOPENROWSET. My problem is that I'm not sure of the exact syntax I needto use when the SQL statement itself contains single quotes.Unfortunately, OPENROWSET doesn't allow me to use parameters so I can'tget around the problem by assigning the SQL statement to a parameter oftype varchar or nvarchar as inSELECT *FROM OPENROWSET('MSDAORA','myconnection';'myusername';' mypassword',@chvSQL)I tried doubling the single quotes as inSELECT *FROM OPENROWSET('MSDAORA','myconnection';'myusername';' mypassword','SELECT *FROM AWHERE DateCol > To_Date(''2002-12-01'', ''yyyy-mm-dd'')')But that didn't work. Is there a way out of this?Thanks,Bill E.Hollywood, FL
View 1 Replies View RelatedHi,Don't worry about the vars, they are defined,the following line give me an err of "Incorrect syntax near '.'."Goal: to rename nonstardard column name.EXEC sp_rename '+@tbuffer+'.['+@cbuffer+']','+Replace(+@cbuffer+','%[^A-Za-z0-9_#$@]%','')','COLUMN';Thanks.
View 6 Replies View RelatedHere is what I would like to execute
SELECT * FROM sale
WHERE id =1 AND caldate >='10/1/2015' AND caldate <='10/31/2015'
and I don't know how to write this in SP
CREATE PROCEDURE [dbo].[sale]
@id int,
[Code] ...
Is this a correct way to enclose a variable in single quotes?
Hi All, I am facing quotes problem. Without using the quotes
my query is running fine, but I need to use IIF condition so for that I
need quotes adjustment. I didn't figured it out how to adjust them, try
several techniques but no success. I am using dotnetnuke. {IIF,"[frmradio,form]=text"," SELECT Docs.FileName, Dept_LegalLaw.MediaID, Dept_LegalLaw.ID, Dept_LegalLaw.LevelID, Dept_LegalLaw.LawID, Dept_LegalLaw.LawDate, Dept_LegalLaw.Agreement, Dept_LegalLaw.Name, Dept_LegalLaw.NameSearch, Dept_LegalLawType.LawType, Dept_LegalLaw.LawNo, Dept_LegalMinistries.RegID, Dept_LegalLaw.IssueNo, Dept_LegalLaw.Attachment, Dept_LegalLaw.Amendment, Dept_LegalLaw.Scanned, Dept_LegalLaw.Html, Dept_LegalMinistries.Description FROM OPENQUERY(LEGALDBSERVER, 'SELECT Filename FROM SCOPE() WHERE Contains('" @FilterAnyWrd ")' ) AS Docs INNER JOIN Dept_LegalLaw ON Docs.FileName = Dept_LegalLaw.FileName INNER JOIN Dept_LegalMinistries ON Dept_LegalLaw.RegID = Dept_LegalMinistries.RegID INNER JOIN Dept_LegalLawType ON Dept_LegalLaw.LawID = Dept_LegalLawType.LawID ", " "} {IIF,"'[frmradio,form]'='title'"," SELECT MediaID, Dept_LegalLaw.ID, Dept_LegalLaw.LevelID, Dept_LegalLaw.LawID, LawDate, Agreement, Name, NameSearch, Dept_LegalLawType.LawType, LawNo, Dept_LegalMinistries.RegID, IssueNo, Attachment, Amendment, Scanned, Html, Dept_LegalMinistries.Description, Dept_LegalLaw.FileName FROM Dept_LegalLaw LEFT JOIN Dept_LegalMinistries ON Dept_LegalLaw.RegID COLLATE DATABASE_DEFAULT = Dept_LegalMinistries.RegID COLLATE DATABASE_DEFAULT INNER JOIN Dept_LegalLawType ON Dept_LegalLaw.LawID COLLATE DATABASE_DEFAULT = Dept_LegalLawType.LawID COLLATE DATABASE_DEFAULT WHERE @FilterLawNo AND @FilterLawID AND @FilterRegID AND @FilterIssueNo AND @FilterFromDate AND @FilterToDate AND @FilterNtContNew AND @FilterAgreement AND @FilterAllWrdNew AND @FilterExWrdNew AND @FilterAnyWrdNew ORDER BY [SORTTAG] ", " "} Thanks for any help
Update TableName
Set Field2 = 'This text contains '' single quote's'
Where Field1 = 10
How is this usually done?
Thanks
cmd1.commandtext = "Insert table_bug(name, address, phone, comment) Values('" & name & "','" & address & "','" & phone & "'," & ",'" comment & "')"
from VB ADO where comment contains single qoutes like 'don't'.
Insert fails. Please help!
define @strName as varchar(50) NULL
set @strName=(SELECT strname from Table)
SELECT '+ @strName +' from Table
It does not work
Hi: Got a newbie question that's been giving me fits! Basically I'm replicating what's going on here on this board...creating a "posting" interface that takes the "message" and inserts it into a table using an ADODB connection (using INSERT INTO table name,tablecells and VALUES)
However, if someone types in a single or double quote in the body of the message, I get an error similar to this:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near 's'.
/test.asp, line 29
I think I understand why it's happening (SQL is interpreting the quote mark as a string-end), but what am I supposed to do to get around it?
I have this pivot table (I only post the static version as the problem only regards the single quotes)
SELECT * from(
select DATEPART(year,DeliverydatePackingSlip) as Year,
CASE WHEN DiffPromiseDateFirst < 0 Then '1 - too early'
WHEN DiffPromiseDateFirst = 0 Then '2 - on time'
ELSE '3 - too late' END as Delivery
from iq4bisprocess.FactOTDCustomer
WHERE OTD_Exclusion = 0)a
PIVOT ( COUNT(Year)
For Year
in ([2012],[2013],[2014],[2015])) as pvtNow, packing everything in a string parameter I always stumble over the single quotes. I tried to replace them with CHAR(39), I tried to define a parameter for each occurrence, but always get a syntax error. What am I doing wrong?declare @sql nvarchar(max)
declare @title1 nvarchar(20)
declare @title2 nvarchar(20)
declare @title3 nvarchar(20)
set @title1 = '1 - too early'
set @title2 = '2 - on time'
set @title3 = '3 - too late'
[Code] .....
exec sp_executesql @sqlThis would throw:Msg 102, Level 15, State 1, Line 3 Incorrect syntax near 'early'.
I've got a flat file data source, that is to large to edit with most Windows apps on my server that contains both single and double quote characters that I need to load in a varchar column.
So I attempted to do it with a Replace in data transformation, but I can't get SSIS to allow me to use a variable or pair of single or double quotes within the replace.
If I don't replace the single quote characters with a pair then the records containing these characters all end up in my failed records output file.
Here are 5 example property legal descriptions from my FLAT FILE data source:
COM 441'6" N OF SW/C OF NW4 OF SEC 22-29-20 ELY1340' N200' CROSSING THE CNTR OF TR AT 100 WLY1240' S200' TO POB CONTAINING 6 3/10 ACRE MOL
N 50' OF S 330' OF W 122' OF E 735' OF SW4 OF NE4 OF SEC 28/28/18 A/K/A LOT
271 BLK "M" OF$PB 14/36-T
LOT 9 BLK "BA" OF$PB 39/1
OVERCODED POST LTS 17 21-42 47-55 & 69 PB 27/110 "ALL" SECS 16-21, 28 29/31/19 & "ALL"
N 100' OF S 815' OF TR "H" OF PB 28/58 LESS W 15' FOR ESMT ESMT DESC AS W 15' OF S 815' OF TR "H" OF PB 28/58
Hi,
Your help would be appreciated if you could give me some idea about why SQL 2000 takes single quote(') as a default for string searching instead of double quotes("). I have couple of stored procedures which were developed with string comparison with double quotes in SQL 6.5. If any one knows how I can change default as a double quotes(") instead of single quote(') in SQL 2000, would be great. Thanks
I've a weird problem in my application. In of the pages, while trying to update the text box "Name", when I enter Linda's test, it gets saved as Linda''s test. I'm not sure if this is a problem due to SQL server. When I look at the stored procedure, I don't anything different. Also, when I update the table directly in SQL Server, the result is displayed in single quote. But if I update the field thro' the application, the returned name is with double quotes instead of single quote. Has any of you faced problems like this? What am I missing? What do I need to do to get the name saved the way I entered (with single quotes) instead of double quotes?
View 1 Replies View RelatedI am trying to build a dynamic where statement for my sql stored prcoedure
if len(@Office) > 0 select @strWhereClause = N'cvEh.chOfficeId in (select id from dbo.csfParseDeLimitedText( ' + @vchOffice + ',' + ''',''' + '))' + ' and ' + @strWhereClause
In this case users can enter comma delimited string in their search criteria. So if they enter we1, we2, we3 then my sql statement should look like
select @strWhereClause = cvEh.chOfficeId in (select id from dbo.csfParseDeLimitedText('we1', 'we2', 'we3'),',')
My csfParseDeLimitedText function looks like this
Create FUNCTION [dbo].[csfParseDeLimitedText] (@p_text varchar(4000), @p_Delimeter char(1))RETURNS @results TABLE (id varchar(100))ASBEGIN declare @i1 varchar(200)declare @i2 varchar(200)declare @tempResults Table (id varchar(100))while len(@p_text) > 0 and charindex(@p_Delimeter, @p_text) <> 0beginselect @i1 = left(@p_text, charindex(@p_Delimeter, @p_text) - 1)insert @tempResults select @i1select @p_text = right(@p_text, len(@p_text) - charindex(@p_Delimeter,@p_text))endinsert @tempResults select @p_text
insert @resultsselect *from @tempResultsreturnEND
My problem is it does not put quotes around the comma delimited stringso I want to put 'we1' , 'we2'. These single quotes are not coming in the dynamic sql statement. How can I modify my query so that single quotes around each entry should show up.
Any help will be greatky appreciated.
Thanks
Hello,
how can I use the following statement with OPENQERY syntax:
SELECT 'hello world' FROM mytable
Maybe I have to transform quite a few and complex SQL-statements to the OPENQUERY syntax. Obviously I have problems with single quotes
SELECT * FROM OPENQUERY(LINKEDSERVER, 'select 'hello world' from mytable')
quotename('hello world', '''') does not help because this will create 'hello world' instead of hello world (w/o quotes).
How can I transform my SQL-statements with quotes to Openquery syntax?
regards
arno
I have data in a trace file, and I need to extract some info such as phone number.The problem is the phone number could be varying lengths, and various positions in the row.
For example:
@City='New York', @Phone='2035551212' (10 characters, no dashes)
or
@City='San Francisco', @Phone='918-555-1212' (12 characters, with dashes)
or
@City+'Berlin', @Phone='55-123456-7890' (14 characters, with dashes)
I can use CHARINDEX to search & find @Phone=' so I know where the phone number starts, but stuck on a programatic way to find the data between the quotes since it can vary.
Hi,
I need to concatenate a string with an int variable on a stored procedure; however, i looks like i am lost in single and double quotes. Does any one know the right comination of quotes for this please? My Code is below:
1 @Price int
2
3 DECLARE @SqlPrice varchar(50)
4
5 if (@Price is not null)
6
7 set @sqlPrice = 'AND price' + '' > '' + '' + @Price + ''
8