Insert Data By OLE DB Destination For Paradox Table Problem
Aug 23, 2007
Dear all -
iam facing a problem to insert data to paradox table by using OLE DB Destination ,
Briefly i built a simple data flow the has OLE DB Source from paradox Table1 and it linked to OLE DB Destination for another Paradox Table2 (i use query to get the table2 data in OLE DB Destination because it refuse to get data Directly) .
The problem that when i start debugging an error raise as the following:
Error: 0xC0202009 at Data Flow Task 1, OLE DB Destination [554]: An OLE DB error has occurred. Error code: 0x80040E09.
Error: 0xC0047022 at Data Flow Task 1, DTS.Pipeline: The ProcessInput method on component "OLE DB Destination" (554) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Error: 0xC0047021 at Data Flow Task 1, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0202009.
i hope someone help soon because i need to handle this problem as soon as possible
thanks ,
Maylo
I am new to integration services. I am trying to a build a data warehouse and need to be able to insert new data as well as update data that has changed. I am getting the data in a flat file and need to import it into SQL 2005. I saw some post on www.sqlis.com/default.aspx?311 but I did the example is for OLE DB component. I am not sure how to achieve this using a text file as source. Any help would be greatly appreicated.
I used bulk insert to insert a txt file into a table. It works fine. (see code below) Now, one txt file with column's name at first row and has about 200 columns. There is no table created before. How to code to create a destination table based on first row of the txt file so that bulk insert will work for that txt file?
BULK INSERT #MBRACCT FROM 'c:order.TXT' WITH ( FIELDTERMINATOR = '|', FIRSTROW = 2, ROWTERMINATOR = '' )
In a Data Flow Task, I have an insert that occurs into a SQL Server 2000 table from a fixed width flat file. The SQL Server table that the data goes into is accessed through an OLE DB connection manager that uses the Native OLE DBMicrosoft OLE DB Provider for SQL Server.
In the OLE DB Destination, I changed the access mode from Table or View - fast load to Table or View because I needed to implement OLE DB Destination Error Output. The Error output goes to a SQL Server 2000 table that uses the same connection manager.
The OLE DB Destination Editor Error Output 'Error' option is configured to 'Redirect' the row. 'Set this value to selected cells' is set to 'Fail component'.
Was changing the access mode the simple reason why the insert from the flat file takes so much longer, or could there be other problems?
I want to insert data calling a stored procedure and call this from a Data Flow destination object. Is it possible?
I understand that Ole Db Command transformation object can call stored procedure, but that will not rollback in the event of error in the middle.
I understand that Ole Db Destination object will rollback in middle of import, but I don't see how to do the insert by calling stored procedure. "Sql Command" option in Ole Db Destination object does not seem to present solution to the problem.
Am I missing something here or is Ssis / Microsoft demanding that Insert stored procedure not be used when using Data Flow destination object to insert data into target table?
I have a Paradox file which has 270 thousand records. If I open this db file through a paradox viewer it shows the correct number of rows.
I have an SSIS package which is suppose to read this db file and insert it into the SQL 2005 table. But when I execute this package it goes into a loop, reading the file over and over again. The package fails after inserting some 10 million rows giving the error msg 'Not enough space on temporary disk'.
On examing the data transfered into SQL there are duplicate rows.
I also used the import export wizard (thinking there might be some error in Package code) provided by SQL to transfer the data from .db to SQL but it has the same result(goes in a loop).
I would appreciate any help in this problem. Let me know if you have any other questions.
i was used the Follwing DataFlow for my Package.using Oracle 8i
FalteFile Source -------------> Data Conversion --------------->OLEDB Destination (Oracle Data table)
using above control flow to map the Source file to Destination . When i run the SSIS Package teh Folwing Error i got
"Truncation Occur maydue to inserting data from data flow column "columnName " with a length of 50 "
regarding this Error i i understood its for happening Data Length . so that i was changed the Source Column Length Exactly Match with the The Destination table.
still i am getting this Error. pls any one give me a solution . SHould i Change the DataType also?
I am using SSIS integration between two database. Both databases are sql server 2008. using many integration but getting problem in two only only two integration giving problem, both are executing perfectly and out put also not showing any error.
but destination table not inserted/updated anything.
first issue integration is using data flow task with oledb source and destination. second one is using execute task with for-eachloop container.
I've never really setup or used MS SQL Server (just a couple hours, oneday, several months ago). I think MS SQL Server has the ability to use"linked tables", like MS Access does. Is this correct? What I want todo is have an MS SQL Server setup, which compatible applications cantalk with, but I want the data to come from a Paradox database. I canuse any MS SQL version, whatever would work best. I'm not sure aboutthe Paradox version, I know it is an old DOS version. I can't justconvert the data to another format, because Paradox still needs to useit.I tried using MS Access before, with ODBC drivers it *should* be ableto work with the Paradox data. However, I ended up with lots of datacorruption. I'm hoping MS SQL Server may work better, and not corruptthe Paradox data everytime it is updated.
I am stuck on finding a solution to transpose source data from a system via a metadata look-up table into a destination table. I need a method to transpose/pivot the source data into columns (which are by various data-types). The datatypes for each column are listed in a metadata table.
Source Data Table:
Table Name: Source
SrcID AGE City Date 01 32 London 01-01-2013 02 35 Lagos 02-01-2013 03 36 NY 03-01-2013
Metadata Table:
Table Name:Metadata
MetaID Column_Name Column_type 11 AGE col_integer 22 City col_character 33 Date col_date
Destination table:
The source data to be loaded into the destination table(as shown below):
I have SQL Server 2000 and I'm trying to import data from a paradox v5 database. Everything has moved over fine but the data from the blob fields. When I use the import tool and try connect to a paradox blob field, the import wizard does not "see" the paradox blob field. here is and example.
If I have a table with the following fields. id char(20) description char(120) image blob
the ms-sql import wizard sees id char(20) description char(20)
I find this very odd, but I do need a solution. Any Ideas?
Dear All - iam facing a problem for passing a parameter to update paradox table statment in the OLE DB Command
Briefly an OLE DB Command exist between OLE DB Source and OLE DB destination , all i want it to send the data that flow from the OLE DB Source to the update paradox table statment in OLE DB Command ,
i use the parameter annotation which is "?" to refer to the parameter in the update where clause and it sucess when i use the OLE DB Command to connect to SQL Server DB but when i use it with the Paradox Table an error appear saying that there is more than one data source column with the name "?" The data source column names must be unique.
i dont know what that means is it means that "?" it consider "?" as a column or what or is there another way to send parameter to Update statment for the paradox table differ from the SQL Server Update statment which is the "? "
i hope someone help me as soon as possible because i need it in work sOOon Thanks, Maylo
I am writing a query to return some production data. Basically i need to insert either 1 or 2 rows into a Table variable based on a decision as to does the production part make 1 or 2 items ( The Raw data does not allow for this it comes from a look up in my database)
I can retrieve all the source data i need easily but when i come to insert it into the table variable i need to insert 1 record if its a single part or 2 records if its a twin part. I know could use a cursor but im sure there has to be an easier way !
Below is the code i have at the moment
declare @startdate as datetime declare @enddate as datetime declare @Line as Integer DECLARE @count INT
set @startdate = '2015-01-01' set @enddate = '2015-01-31'
I want to process data from source table to destination table without using cursor.
At this point; we are creating temp table and inserting data from source to temp table. once we get data into temp table; using while loop we are processing record one by one to destination table.
while executing stored procedure; we noticed that there are few records in source table which are invalid and stored procedure is terminating from such records.
Any better approach to log INVALID data and resume code to process next record instead of terminating.
I have a series of data flow tasks that I want to output to a temp table. I've set the data source for RetainSameConnection and the Data Flows are DelayValidation. The OLE DB data source inside the Data Flow works fine, but the data destinations don't offer a # or ## as a target. I've tried every destination that sounds logical, without success.
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Hi, I was wondering how I can complete a column (which doesnt have an input one) with data. For example:
I have a sql query which bring data of 3 columns
ID | FISRT NAME | LAST NAME 1 MIKE MORGAN 2 SARA JOHANES
So, I will insert that data in a FLAT FILE CONNECTION MANAGER, which I configured with 3 columns and I did the corresponding mapping in the FLAT FILE DESTINTATION.
Now, If I add one more column in the FLAT FILE CONNECTION MANAGER, I will not have it mapped to a input one, obviously. So, what I need is to add one more column to the flat file destination and complete it with zeros values in it.
Probably I can solve this part by introducing a DERIVED COLUMN and there I can configure the zeros that I want to add to the column. But I'm not sure if I can do that without having a input column. So, the question will be, how can I add one column to a flat file which doesnt have a input and introduce any value that I want to it? Hope I was clear Thanks for your help.
On my site users can register using ASP Membership Create user Wizard control. I am also using the wizard control to design a simple question and answer form that logged in users have access to. it has 2 questions including a text box for Q1 and dropdown list for Q2. I have a table in my database called "Players" which has 3 Columns UserId Primary Key of type Unique Identifyer PlayerName Type String PlayerGenre Type Sting
On completing the wizard and clicking the finish button, I want the data to be inserted into the SQl express Players table. I am having problems getting this to work and keep getting exceptions. Be very helpful if somebody could check the code and advise where the problem is??
To match the answers to the user I get the UserId and insert this into the database to.protected void Wizard1_FinishButtonClick(object sender, WizardNavigationEventArgs e) { SqlDataSource DataSource = (SqlDataSource)Wizard1.FindControl("InsertArtist1"); MembershipUser myUser = Membership.GetUser(this.User.Identity.Name); Guid UserId = (Guid)myUser.ProviderUserKey;String Gender = ((DropDownList)Wizard1.FindControl("PlayerGenre")).SelectedValue; DataSource.InsertParameters.Add("UserId", UserId.ToString());DataSource.InsertParameters.Add("PlayerGenre", Gender.ToString()); DataSource.Insert();
I have SQL Server Management Studio Express (SSMS Express) and SQL Server 2005 Express (SS Express) installed in my Windows XP Pro PC that is on Microsoft Windows NT 4 LAN System. My Computer Administrator grants me the Administror Privilege to use my PC. I tried to use SQLQuery.sql (see the code below) to create a table "LabResults" and insert 20 data (values) into the table. I got Error Messages 102 and 156 when I did "Parse" or "Execute". This is my first time to apply the data type 'decimal' and the "VALUES" into the table. I do not know what is wrong with the 'decimal' and how to add the "VALUES": (1) Do I put the precision and scale of the decimal wrong? (2) Do I have to use "GO" after each "VALUES"? Please help and advise.
Thanks in advance,
Scott Chang
///////////--SQLQueryCroomLabData.sql--/////////////////////////// USE MyDatabase GO CREATE TABLE dbo.LabResults (SampleID int PRIMARY KEY NOT NULL, SampleName varchar(25) NOT NULL, AnalyteName varchar(25) NOT NULL, Concentration decimal(6.2) NULL) GO --Inserting data into a table INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration) VALUES (1, 'MW2', 'Acetone', 1.00) VALUES (2, 'MW2', 'Dichloroethene', 1.00) VALUES (3, 'MW2', 'Trichloroethene', 20.00) VALUES (4, 'MW2', 'Chloroform', 1.00) VALUES (5, 'MW2', 'Methylene Chloride', 1.00) VALUES (6, 'MW6S', 'Acetone', 1.00) VALUES (7, 'MW6S', 'Dichloroethene', 1.00) VALUES (8, 'MW6S', 'Trichloroethene', 1.00) VALUES (9, 'MW6S', 'Chloroform', 1.00) VALUES (10, 'MW6S', 'Methylene Chloride', 1.00 VALUES (11, 'MW7', 'Acetone', 1.00) VALUES (12, 'MW7', 'Dichloroethene', 1.00) VALUES (13, 'MW7', 'Trichloroethene', 1.00) VALUES (14, 'MW7', 'Chloroform', 1.00) VALUES (15, 'MW7', 'Methylene Chloride', 1.00 VALUES (16, 'TripBlank', 'Acetone', 1.00) VALUES (17, 'TripBlank', 'Dichloroethene', 1.00) VALUES (18, 'TripBlank', 'Trichloroethene', 1.00) VALUES (19, 'TripBlank', 'Chloroform', 0.76) VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51) GO //////////Parse/////////// Msg 102, Level 15, State 1, Line 5 Incorrect syntax near '6.2'. Msg 156, Level 15, State 1, Line 4 Incorrect syntax near the keyword 'VALUES'. ////////////////Execute//////////////////// Msg 102, Level 15, State 1, Line 5 Incorrect syntax near '6.2'. Msg 156, Level 15, State 1, Line 4 Incorrect syntax near the keyword 'VALUES'.
I'm trying to insert data into a table from two tables into a single table along with a hard coded value.
insert into TABLE1 (THING,PERSONORGROUP,ACCESSRIGHTS) VALUES ((select SYSTEM_ID from TABLE2 where AUTHOR IN (select SYSTEM_ID from TABLE2 where USER_ID =('USER1'))),(select SYSTEM_ID from TABLE2 where USER_ID =('USER2')),255)
I get the following-
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
An SSIS package to transfer data from a DB instance on SQL Server 2005 to SQL Server 2000 is extremely slow. The package uses an OLEDB Source to OLEDB Destination for data transfer which is basically one table from sql server 2005 to sql server 2000. The job takes 5 minutes to transfer about 400 rows at night when there is very little activity on the server. During the day the job almost always times out.
On SQL Server 200 instances the job ran in minutes in the old 2000 package.
Is there an alternative to this. Tranfer Objects task does not work as there is apparently a defect according to Microsoft. Please let me know if there is any other option other than using a Execute 2000 package task or using an ActiveX Script to read records from one source and to insert them into the destination source, which I am not certain how long it might take and how viable will that be?
Is it possible to insert data into a table from a temporary table that is inner join? Can anyone share an example of a stored procedure that can do this? Thanks, xyz789
Hi, I am having 2 tables. One is main table and another is history table. Whenever I update the main table, I need to insert the all the main table data to History table, before updating the main table. Overall it is like storing the history of the table updation. How do i write a stored procedure for this? Anybody has done this before? Pls help me.
I want to insert the data from temp table to other table. Only condition is, it needs to sorted based on tool number and tool date. For example if we have ten records for tool number 1000, it should be order by tool number and then based on tool_dt. Both tables doesn't have any primary keys. Please find below my code. I removed all the unnecessary columns for simple understanding. INSERT INTO tool_summary (tool_nbr, tool_dt) select tool_nbr, tool_dt from #tool order by tool_nbr, tool_dt...But this query is not working as expected. Data is getting shuffled.
Greetings from a SSIS newbie still on the learning curve...
I have a SQL query OLE DB Source that yields a result set that I'd like to put into a SQL Server Destination, but only those records that don't already exist in the destination.
Is there a recommended (read: easy) way to accomplish this? Perhaps a handy transformation?
I have tried to incorporate a subquery in my source query along the lines of:
SELECT fields FROM table1 WHERE keyfield NOT IN (SELECT keyfield from table2)
which works in design time but fails at the server with a cryptic:
"Error: Unable to prepare the SSIS bulk insert for data insertion."
and
"Error: component "<component>" (16) failed the pre-execute phase and returned error code 0xC0202071."
Don't mean for that to cloud the issue, though. I would appreciate any help given.
I had a function like below :Public Sub Getdata2(ByVal query, ByVal db, ByVal name) Dim selectSQL As StringDim con As SqlConnection Dim cmd As SqlCommand Dim reader As SqlDataReader Trycon = New SqlConnection("User ID=xxx;password=xxx;persist security info=True;Initial Catalog=database1;Data Source=xxx.xxx.xxx.xxx.xxx,xxxxx;") Dim username As String username = Request.QueryString("username") selectSQL = "SET DATEFORMAT DMY;Insert into table1(hse_num, st_name, proj_name, unit_num, postal, n_postal, flr_area, flr_sf, flr_rate, flr_ra_sf, land_area, land_sf, land_rate, lnd_ra_sf, prop_code, cont_date, title, sisv_ref, r_date, rec_num, source, username, DGP, Remarks, Sub_Code, caveat, consider, age) select hse_num, st_name, proj_name, unit_num, postal, n_postal, flr_area, flr_sf, flr_rate, flr_ra_sf, land_area, land_sf, land_rate, lnd_ra_sf, prop_code, cont_date, title, sisv_ref, r_date, rec_num, source, '" & username & "', DGP, Remarks, Sub_Code, caveat, consider, age from [yyy.yyy.yyy.yyy,yyyy].database2.dbo.table2 where " & querycmd = New SqlCommand(selectSQL, con) con.Open() reader = cmd.ExecuteReader() lbl.Text = selectSQLCatch ex As Exception lbl.Text = ex.Message Finally If (Not con Is Nothing) Then con.Close() con.Dispose() End If End Try End Sub '------------------------------------------------------------------------------------------------------------------------------------------------------------------------- May i know that how do i retrieve data from [yyy.yyy.yyy.yyy,yyyy].database2.dbo.table2 due to diffrent server, diffrent UID and Password
I am trying to migrate database from old structure to new structure usign SSIS.
The table in new db have extra field that i need to assign it using variable. this is because i have few customer that having different variable value. (meaning for 1 customer, the variable will be fix for all the tables in the database)
my question, without using the Execute Sql Task, can i assign the variable into the the old db destination?
eg my data flow Task is : OLE Db Source - Derived Column - OLE DB Destination.
Example data
Old structure (key = txnID) --------------------- TxnID ChequeNo Bank (chq Bank - Bank in Bank) Amount
Hello, I have a table called #table1 which is populated as in the example below. I would like to write a selectinsert statement based on #table1 that populates #table2 like in the #table2 example. Note #table2 is a fixed table that follows the structure below.
Can any of you T-SQL gurus help me with my problem? Any help will be most appreciated. Thanks
Insert into #table1 select '012345','2008-04-19 00:00:00.000' , '01', '06', '05', null, null UNION all select '012345','2008-04-20 00:00:00.000' , '01', '07', '05', '07', '03' UNION all select '012345','2008-04-21 00:00:00.000' , '01', '06', null, null, null UNION all select '012345','2008-04-22 00:00:00.000' , '01', '02', '05', '07', null UNION all select '012345','2008-04-23 00:00:00.000' , '03', '06', null, null, null UNION all select '987654','2008-04-21 00:00:00.000' , '19', '21', null, null, null UNION all select '987654','2008-04-22 00:00:00.000' , '01', '02', '05', '16', null UNION all select '987654','2008-04-23 00:00:00.000' , '03', '06', null, null, null
select * from #table1
--This is the table i would like to insert my data into CREATE TABLE #table2 --max of 5 orders in 1 day --it does not matter what date the date order was made the 1st date would appear in dateorder1 and so on... ( custID nvarchar(6), dateorder1 [datetime] NULL, order1_1 nvarchar(2), order1_2 nvarchar(2), order1_3 nvarchar(2), order1_4 nvarchar(2), order1_5 nvarchar(2), dateorder2 [datetime] NULL, order2_1 nvarchar(2), order2_2 nvarchar(2), order2_3 nvarchar(2), order2_4 nvarchar(2), order2_5 nvarchar(2), dateorder3 [datetime] NULL, order3_1 nvarchar(2), order3_2 nvarchar(2), order3_3 nvarchar(2), order3_4 nvarchar(2), order3_5 nvarchar(2), dateorder4 [datetime] NULL, order4_1 nvarchar(2), order4_2 nvarchar(2), order4_3 nvarchar(2), order4_4 nvarchar(2), order4_5 nvarchar(2), dateorder5 [datetime] NULL, order5_1 nvarchar(2), order5_2 nvarchar(2), order5_3 nvarchar(2), order5_4 nvarchar(2), order5_5 nvarchar(2) )
TABLE1 ID Roll Name Amount . . . . . . so on --------------------------------------- 1 2 Alex 500 2 5 Jones 600 3 2 Ales 400
and we have TABLE 2
ID Roll Name Amount . . . . . . . so on
In both the Tables ID Field is Identity Field and rest all the columns are identical in both the tables.I want to perform a query in such a way that SQL Should,
1) Remove all data from TABLE2 First 2) Select those records from TABLE1 where Roll = 2 3) Then, Insert the results to TABLE 2
So we should get the result similar to below:
ID Roll Name Amount . . . . . . . so on --------------------------------------- 1 2 Alex 500 3 2 Ales 400
