hi
for after trigger the records stored in followig table
inserted and deleted table.
but i want to know where this tables physically stored ...i mean in which database master or some other database?
and 2nd thing tigger fired for each row or for only insert,delete,update statement?
thanx
Hi,
I am currently working on a MS SQL server 2000.
I would like to access the data inserted or deleted within a trigger. however the built-in tables -- inserted and deleted --- are not accessible. anyone knows why? And is there any other way to do this?
Thanks
Hello,
I have a stored procedure that's running a little slower than I would like. I've executed the stored proc in QA and looked at the execution plan and it looks like the problem is in a trigger on one of the updated tables. The update on this table is affecting one row (I've specified the entire unique primary key, so I know this to be the case). Within my trigger there is some code to save an audit trail of the data. One of these statements does an update of the history table based on the inserted and deleted tables. For some reason this is taking 11.89% of the batch cost (MUCH more than any other statement) and within this statement 50% of the cost is for a table scan on inserted and 50% is for a table scan on deleted. These pseudo-tables should only contain one record each though.
Any ideas why this would be causing such a problem? I've included a simplified version of the update below. The "or" statements actually continue for all columns in the table. The same trigger template is used for all tables in the database and none of the others seem to exhibit this behavior as far as I can tell.
Thanks for any help!
-Tom.
UPDATE H_MyTable
SET HIST_END_DT = @tran_date
FROM H_MyTable his
INNER JOIN deleted del ON (his.PrimaryKey1 = del.PrimaryKey1) and
(his.PrimaryKey2 = del.PrimaryKey2)
INNER JOIN inserted ins ON (his.PrimaryKey1 = ins.PrimaryKey1) and
(his.PrimaryKey2 = ins.PrimaryKey2)
WHERE (his.HIST_END_DT is null)
and ((IsNull(del.PrimaryKey1, -918273645) <>
IsNull(ins.PrimaryKey1, -918273645)) or
(IsNull(del.PrimaryKey2, -918273645) <>
IsNull(ins.PrimaryKey2, -918273645)) or
(IsNull(del.Column3, -918273645) <>
IsNull(ins.Column3, -918273645)))
Is there a configuration or a trick to improve the speed of the access to inserted and deleted tables whithin a trigger? Whenever a trigger is called, the access to inserted or deleted constitute approximatly 95% of the execution time.
Is there a way to have access to inserted and to deleted improved other than copying the data to another table?
Hi SQL fans,I realized that I often encounter the same situation in a relationdatabase context, where I really don't know what to do. Here is anexample, where I have 2 tables as follow:__________________________________________ | PortfolioTitle|| Portfolio |+----------------------------------------++-----------------------------+ | tfolio_id (int)|| folio_id (int) |<<-PK----FK--| tfolio_idfolio (int)|| folio_name (varchar) | | tfolio_idtitle (int)|--FK----PK->>[ Titles]+-----------------------------+ | tfolio_weight(decimal(6,5)) |+-----------------------------------------+Note that I also have a "Titles" tables (hence the tfolio_idtitlelink).My problem is : When I update a portfolio, I must update all theassociated titles in it. That means that titles can be either removedfrom the portfolio (a folio does not support the title anymore), addedto it (a new title is supported by the folio) or simply updated (atitle stays in the portfolio, but has its weight changed)For example, if the portfolio #2 would contain :[ PortfolioTitle ]id | idFolio | idTitre | poids1 2 1 102 2 2 203 2 3 30and I must update the PortfolioTitle based on these values :idFolio | idTitre | poids2 2 202 3 352 4 40then I should1 ) remove the title #1 from the folio by deleting its entry in thePortfolioTitle table2 ) update the title #2 (weight from 30 to 35)3 ) add the title #4 to the folioFor now, the only way I've found to do this is delete all the entriesof the related folio (e.g.: DELETE TitrePortefeuille WHERE idFolio =2), and then insert new values for each entry based on the new givenvalues.Is there a way to better manage this by detecting which value has to beinserted/updated/deleted?And this applies to many situation :(If you need other examples, I can give you.thanks a lot!ibiza
View 8 Replies View RelatedHow can we capture the last inserted, updated or deleted ID from the database ?
View 4 Replies View RelatedHello,
Is there an alternative to using FETCH to loop through the Inserted/Delete Tables within a trigger? Does this work?
SELECT * FROM Inserted
BEGIN
if INSERTED.IsActive then ...
END
Would this only see the first record?
Currently I'm doing the following;
AS
DECLARE @JobID INTEGER;
DECLARE @IsActive BIT;
DECLARE Temp CURSOR FOR SELECT JobID, IsActive FROM Inserted;
BEGIN
OPEN Temp;
FETCH NEXT FROM Temp INTO @JobID, @IsActive;
WHILE (@@FETCH_STATUS = 0) BEGIN
if @IsActive then ...
FETCH NEXT FROM Temp INTO @JobID, @IsActive;
END;
CLOSE Temp;
DEALLOCATE Temp;
Is this the best method for looping through the Deleted/Inserted or any other table within a trigger?
Thanks,
Steve
SQL 7 SP2
Are the tables inserted and deleted available from within a sp which is called from a trigger ?
Craig
I am reading the WROX "Professional SQL Server 7 Programming" book.
The following code appears on page 424:
CREATE TRIGGER ProductIsRationed
ON Products
FOR UPDATE
AS
IF EXISTS
(
SELECT 'True'
FROM Inserted i
JOIN Deleted d
ON i.ProductID = d.ProductID
WHERE (d.UnitsInStock - i.UnitsInStock) > d.UnitsInStock / 2
AND d.UnitsInStock - i.UnitsInStock > 0
)
BEGIN
RAISERROR('Cannot reduce stock by more than 50%% at once.',16,1)
ROLLBACK TRAN
END
The trigger fires when an UPDATE is made to Products table. The author states that the Inserted and Deleted tables only exist for the life of the trigger, not before, and not after the trigger runs. If this is true, then why would there be any rows in the Deleted table in this case? No rows were
deleted within the trigger. As far as I can see, no rows have been updated
either. If the condition does exist, no rows will be updated, and an error will be displayed. Otherwise, the row will be updated. Then there would be a row in the inserted table. But then the trigger is finished and the inserted table for that trigger disappears. I think my logic is flawed, which is why I am writing. I don't think I fully understand the Inserted and Deleted tables.
Any help would be greatly appreciated.
Nathan
I want to know how inserted and deleted temp tables in SQL server work. My question is more regarding how they work when multiple users accessing the same database. Suppose two users update the database at the same time. In that case what are the values stored in the inserted and deleted tables.
I have a trigger that records changes to the database as in an audit trail. Like any other audit trail I insert data into my audit table from the inserted and deleted temp tables in MS SQL Server. I however am not clear as to how these inserted and deleted tables store values when two users update the database at the same time. Are there separate inserted and deleted tables for each session. The users access the database thru ASP pages.
The audit trail I am trying to use is http://www.nigelrivett.net/AuditTrailTrigger.html
I actually would like to store the inserted and deleted temp tables into other temporary tables so that I can access these tables thru a stored procedure. This is when the problem of same users updating the temporary tables is more pronounced.
Thanks in advance.
I need to add the row number or record number to the 'inserted' and 'deleted' tables in a trigger.
Among other things, I have tried-
SELECT 1 as rowId, i.* INTO #ins FROM inserted i
if @@ROWCOUNT > 1 --if multiple rows, set row number
begin
SELECT @pkWhere = coalesce(@pkWhere + ' and ', ' where ') + PKF.colName + ' <= i.' + PKF.colName FROM #primaryKeyFields PKF
set @strSQL = 'update #ins set rowId = (Select Count(*) From #ins i' + @pkWhere + ')'
exec (@strSql)
end
-the above sets rowId for every record to the total instead of sequential. Keep in mind that this code is used to create a trigger for any table, hence I cannot specify any column names literally.
This SHOULD be simple... right?
I created manage update trigger to react on one column changes. There is an application which is working with DB, so I don't have access to SQL query which changes this column. In most cases trigger works fine, but in one case when this column changes, trigger is fired and IsUpdatedColumn is true for this column, but both inserted and deleted table are empty, so I can't get new value for this column. Any idea why is it happened? Is any way around?
This column type is uniqueidentifier. Inserted and deleted tables are empty when application is changing value from NULL to not null value, but if I change it myself from Management Studio inserted table contains right values. Most like problem is in query which is changing that value.
I'm doing that on Sql Server 2005.
Hi all,
I just ran across an issue on a SQL 2000 sp4 db where RI was being maintained solely with triggers. I am attempting to change the primary key of a parent table and cascade the results to all its children without using the vendor-supplied trigger code (long story...) using an INSTEAD OF trigger.
My question is: does SQL Server create any kind of relationship between the inserted and deleted tables that I could exploit since the key field is unavailable?
I am trying to avoid having to add a surrogate key to each of the children just for this activity (as there are many M rows in each and no other suitable unique column combinations that span all the child tables).
-DC
HI, I am wondering if it is possible to retreive this information without using row count transform. Can I get the # of rows inserted/updated or deleted by destination from the log?
Thank you,
Ccote
I'm know the above tables are system generated, am I right in assuming the following.
1) The tables are unique to the current user.
2) The tables only last as long as the transaction that caused their creation
Thanks in advance
Alex
I want to compare the before and after values of an UPDATEd column using a trigger. I want to know if the value in the column has changed. Simple? No!
As you know, SqlServer puts the before image of the UPDATEd rows into the DELETED virtual table and the after image of the UPDATEd rows in the INSERTED virtual table.
So you would get the before and after data by doing a SELECT on these tables.
But here is the problem - how do you join the tables? What if there are >1 rows in these 2 tables (because the UPDATE affected >1 rows) - how do i know which "old"/DELETED rows correspond to which "new"/INSERTED?"
Ok - I could join the 2 tables on the primary key, but what if the primary key was updated? In that case the join would not work - the DELETED table would contain the old primary key value and the INSERTED table would contain the new (different) primary key value. In fact, ALL of the columns may have been changed by the UPDATE.
Now, there is another thing to try with triggers - the
IF UPDATE ( <columname> )
test. This is designed to tell you if a specified column was UPDATEd by the last UPDATE. However, this will return TRUE for any UPDATE that mentions the column - even if the UPDATE does not change any data! So I cannot determine whether a certain column has had its value changed with this either.
So then you can try another test mentioned in the docs for CREATE TRIGGER - the
IF COLUMNS_UPDATED()
test. However, this will report that a column has been updated, NOT whether the data has changed as aresult of that UPDATE.
So if you UPDATE the value in the column to the same value as it was beforehand (admittedly, a pointless thing to do, but it could happen in some apps), this fuction will say, yes, this column was updated.
So my question remains - how do I know if the data has changed in a column after an UPDATE, using a trigger?
Any ideas?
I dont know what I am doing wrong. The trigger (see below) is doing what I want it to do when I do this:
INSERT INTO dbo.personal
(personal_id, chef_id,fornamn, efternamn)
VALUES
(40, 100, 'Malin', 'Markusson' , 'Boss')
but when I remove one value, the result in the logtable is NULL:
INSERT INTO dbo.personal
(personal_id, chef_id,fornamn, efternamn)
VALUES
(40, 100, 'Malin', 'Markusson' )
How can I change the trigger so that it will give me the information of the values that have been updated, inserted or deleted when I dontchange all values (just a couple of them)?
My trigger:
CREATE Trigger trigex
ON dbo.personal
FOR insert, update,delete
AS
INSERT INTO logtable (Innan_värde, Ny_värde)
SELECT
rtrim(cast(d.personal_id as varchar)+', '+cast(d.chef_id as varchar)+', '+rtrim(d.efternamn)+', '+ rtrim(d.fornamn)+ ', '+ rtrim(d.titel)),
(cast(i.personal_id as varchar)+', '+cast(i.chef_id as varchar)+', '+rtrim(i.efternamn)+', '+ rtrim(i.fornamn)+ ' '+ rtrim(i.titel))
FROM inserted i full join deleted d on i.personal_id = d.personal_id
My table:
CREATE Table logtable
(Innan_värde varbinary(max),
Ny_värde varbinary(max))
Thank you !
can anybody tell me with an example how to use Inserted and Deleted in Sql Server 2005
View 7 Replies View RelatedWe have an app that uses triggers for auditing. Is there a way to know the order that the records were inserted or deleted? Or maybe a clearer question is.... Can the trigger figure out if it was invoked for a transaction that "inserted and then deleted" a record versus "deleted and then inserted" a record? The order of these is important to our auding.
Thanks!
CB
I have a table that sometimes has modifications to column(s) comprising the primary key [usually "end_date"]. I need to audit changes on this table, and naturally, turned to after triggers.
The problem is that for updates, when the primary key composition changes, I'm not able to relate/join using the primary key - obviously, it no longer matches across INSERTED and DELETED. Now, for a single row update, it's easy to check for updates on PK columns and then deduce what changes were made...
So the real question is: are rows in INSERTED and DELETED always in matching order (1st row in INSERTED corresponds to the 1st row in DELETED...)?
I don't want to put a surrogate key (GUID nor IDENTITY) on the base table if at all possible. INSERT... SELECT from the inserted/deleted tables into a temp table with identity column is fine, and is what I'm currently doing; I would like MVP or product engineer level confirmation that my ordering assumption is correct.
Testing using an identity surrogate key on base table, and selecting from the Ins/del tables, and the temp tables without an order by clause seems to always return in proper order (proper for my purposes). I've tested under SQL 2005 RTM, SP1, SP2, and SP2 "3152".
FYI, I've lost the debate that such auditing is better handled by the application, not the database server...
Aside: why doesn't the ROW_NUMBER() function allow an empty OVER( ORDER BY() ) clause? Will SQL ever expose an internal row_id, at least in the pseudo tables, so we can work around this situation?
Thanks
Mike
Hello all,
I have I trigger where I want to insert all _changed_ rows from the INSERTED table into
a table called tempProducts.
If I put this query inside my trigger, I selects exactly the rows I want: rows changed
Code SnippetSELECT * FROM INSERTED
EXCEPT SELECT * FROM DELETED
I the current trigger I have
Code SnippetINSERT INTO dbo.TempProducts (LBTyp, CountryOfOrigin)
SELECT LBTyp, CountryOfOrigin
FROM INSERTED
but this inserts ALL updated rows, not only the changed ones.
So I thought hey, Ill just combine the two querys and the problem will be solved, like so:
Code Snippet
INSERT INTO dbo.TempProducts (LBTyp, CountryOfOrigin)
SELECT LBTyp, CountryOfOrigin
FROM (SELECT * FROM INSERTED
EXCEPT SELECT * FROM DELETED) as Temp
But for some reason, this wont work! Why is this? What am I doing wrong?
When i debug a trigger is it possible to add a WATCHon the INSERTED or DELETED?I think not, at least I couldn't figure out a way to do so.Does someone have a suggestion on how I can see the values?I did try to do something likeINSERT INTO TABLE1(NAME)SELECT NAME FROM INSERTEDbut this didn't work. When the trigger completed and Iwent to see the TABLE1, there were no records in it.Are there any documents, web links that describe waysof debugging the trigger's INSERTED and DELETED?Thank you
View 11 Replies View RelatedHi folks,
Table:
a int,
b int,
c int,
d text
I need to change my AFTER - Trigger from this (example!):
select * into #ins from inserted
to something like
select *(without Text / nText / image -columns) into #ins from inserted.
So I tried to build a string like this: (using INFORMATIONSCHEMES)
select @sql = 'select a,b,c into #ins from inserted'
exec(@sql)
a,b,c are not of Text, nText or Image datatype.
After executing the trigger, I get an error, that inserted is unknown.
Does anyone know how to solve this ?
Thx.
I have a publisher database set up for a merge replication. This is using parameterized filter with join filters.
I also have a stored procedure that does deletes & inserts on the table where the parameterized filter is applied to aid in changing a subscriber's eligibility to receive so and so data. I have observed that running the stored procedure takes extraordinarily long and as a result, the log file grows to a size 1.5 - 2.5 times the database size.
At first I reasoned that this might because I had it set up to use precomputed partitions and changing it requires recalculating the partitions. As a test, I turned off the precomputed partitions. Didn't work. I turned on "optimize synchronization" AKA "keep_partition_changes", which normally is not available when you have precomputed partition on, and that didn't work, either.
At this point, I think I can rule out precomputed partitions being a problem here but I'm stumped now what else I should do to reduce the amount of log writes being required. We do need the parameterized filters & join tables, so that can't go.
I would like to wrap the following code in a function and reuse it. I use this code in many triggers.
DECLARE @Action as char(1);
SET @Action = (CASE WHEN EXISTS(SELECT * FROM INSERTED) AND EXISTS(SELECT * FROM DELETED)
THEN 'U' -- Set Action to Updated.
WHEN EXISTS(SELECT * FROM INSERTED)
THEN 'I' -- Set Action to Insert.
WHEN EXISTS(SELECT * FROM DELETED)
THEN 'D' -- Set Action to Deleted.
ELSE NULL -- Skip. It may have been a "failed delete".
END)
Is it possible to write a function and pass the INSERTED and DELETED logical tables to it?
Hi,
I accidentally deleted a table in my local server. How can I get back the table? I did not do it as a transaction!
Thanks in Advance
Hi thereApplication : Access v2K/SQL 2KJest : Using sproc to append records into SQL tableJest sproc :1.Can have more than 1 record - so using ';' to separate each linefrom each other.2.Example of data'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;3.Problem - gets to lineBEGIN TRAN <---------- skipsrestINSERT INTO timesheet.dbo.table14.Checked permissions for table + sproc - okWhat am I doing wrong ?Any comments most helpful......CREATE PROCEDURE [dbo].[procTimesheetInsert_Testing](@TimesheetDetails varchar(5000) = NULL,@RetCode int = NULL OUTPUT,@RetMsg varchar(100) = NULL OUTPUT,@TimesheetID int = NULL OUTPUT)WITH RECOMPILEASSET NOCOUNT ONDECLARE @SQLBase varchar(8000), @SQLBase1 varchar(8000)DECLARE @SQLComplete varchar(8000) ,@SQLComplete1 varchar(8000)DECLARE @TimesheetCount int, @TimesheetCount1 intDECLARE @TS_LastEdit smalldatetimeDECLARE @Last_Editby smalldatetimeDECLARE @User_Confirm bitDECLARE @User_Confirm_Date smalldatetimeDECLARE @DetailCount intDECLARE @Error int/* Validate input parameters. Assume success. */SELECT @RetCode = 1, @RetMsg = ''IF @TimesheetDetails IS NULLSELECT @RetCode = 0,@RetMsg = @RetMsg +'Timesheet line item(s) required.' + CHAR(13) + CHAR(10)/* Create a temp table parse out each Timesheet detail from inputparameter string,count number of detail records and create SQL statement toinsert detail records into the temp table. */CREATE TABLE #tmpTimesheetDetails(RE_Code varchar(50),PR_Code varchar(50),AC_Code varchar(50),WE_Date smalldatetime,SAT REAL DEFAULT 0,SUN REAL DEFAULT 0,MON REAL DEFAULT 0,TUE REAL DEFAULT 0,WED REAL DEFAULT 0,THU REAL DEFAULT 0,FRI REAL DEFAULT 0,Notes varchar(255),General varchar(50),PO_Number REAL,WWL_Number REAL,CN_Number REAL)SELECT @SQLBase ='INSERT INTO#tmpTimesheetDetails(RE_Code,PR_Code,AC_Code,WE_Da te,SAT,SUN,MON,TUE,WED,THU,FRI,Notes,General,PO_Nu mber,WWL_Number,CN_Number)VALUES ( 'SELECT @TimesheetCount=0WHILE LEN( @TimesheetDetails) > 1BEGINSELECT @SQLComplete = @SQLBase + LEFT( @TimesheetDetails,Charindex(';', @TimesheetDetails) -1) + ')'EXEC(@SQLComplete)SELECT @TimesheetCount = @TimesheetCount + 1SELECT @TimesheetDetails = RIGHT( @TimesheetDetails, Len(@TimesheetDetails)-Charindex(';', @TimesheetDetails))ENDIF (SELECT Count(*) FROM #tmpTimesheetDetails) <> @TimesheetCountSELECT @RetCode = 0, @RetMsg = @RetMsg + 'Timesheet Detailscouldn''t be saved.' + CHAR(13) + CHAR(10)-- If validation failed, exit procIF @RetCode = 0RETURN-- If validation ok, continueSELECT @RetMsg = @RetMsg + 'Timesheet Details ok.' + CHAR(13) +CHAR(10)/* RETURN*/-- Start transaction by inserting into Timesheet tableBEGIN TRANINSERT INTO timesheet.dbo.table1select RE_Code,PR_Code,AC_Code,WE_Date,SAT,SUN,MON,TUE,WE D,THU,FRI,Notes,General,PO_Number,WWL_Number,CN_Nu mberFROM #tmpTimesheetDetails-- Check if insert succeeded. If so, get ID.IF @@ROWCOUNT = 1SELECT @TimesheetID = @@IDENTITYELSESELECT @TimesheetID = 0,@RetCode = 0,@RetMsg = 'Insertion of new Timesheet failed.'-- If order is not inserted, rollback and exitIF @RetCode = 0BEGINROLLBACK TRAN-- RETURNEND--RETURNSELECT @Error =@@errorprint ''print "The value of @error is " + convert (varchar, @error)returnGO
View 2 Replies View RelatedI am looking for a Sql query to verify the inserted values from one table(in CSV file) with another table(in sql database)
For example: I have below Values column that is present in once CSV file, after my data migration the values get stored in Results table under Message column.
I need to very whether values(1X,1Y) are inserted in Message record "successfully inserted value 1X"
Values (CSV)
1X
1Y
Results Table(SQL)
CreatedDate Message
2015-08-04 08:45:29.203 successfully inserted value 1X
2015-08-04 08:44:29.103 TEst pass
2015-08-04 08:43:29.103 successfully inserted value 1X
2015-08-04 08:42:29.203 test point
2015-08-04 08:35:29.203 successfully inserted value 1Y
2015-08-04 08:30:29.203 Test Pass
2015-08-04 08:28:29.203 successfully inserted value 1Y
If all values are inserted:
Output:
All values from values table are inserted successfully
Total count of values inserted: 2
If only few values are inserted, example only 1X from Values table is inserted in Message
Example:
Results Table CreatedDate Message
2015-08-04 08:45:29.203 successfully inserted value 1X
2015-08-04 08:44:29.103 TEst pass
2015-08-04 08:43:29.103 successfully inserted value 1X
2015-08-04 08:42:29.203 test point
Output:
All values from values are not inserted successfully in result table.
Total count of values inserted: 1
Missing Values not inserted in results table are: 1Y
I am trying to update one table when records are inserted in another table.
I have added the following trigger to the table “ProdTr” and every time a record is added I want to update the field “Qty3” in the table “ActInf” with a value from the inserted record.
My problem appears to be that I am unable to fill the variables with values, and I cannot understand why it isn’t working, my code is:
ALTER trigger [dbo].[antall_liter] on [dbo].[ProdTr]
for insert
as
begin
declare @liter as decimal(28,6)
[Code] ....
I want to insert a row for a Global user in Table 'A' whenever ADO.Net code inserts a Local user row into same table. I recommended using a trigger to implement this functionality, but the DBA was against it, saying that stored proecedures should be used, since triggers are unreliable and slow down the system by placing unecessary locks on the table. Is this true OR the DBA is saying something wrong? My thinking is that Microsoft will never include triggers if they are unreliable and the DBA is just wanting to offload the extra DBA task of triggers to the programmer so that a stored procedure is getting called, so he has less headache on his hands.Thanks
View 2 Replies View RelatedI want to pass the 'inserted' table from a trigger into an SP, I think I need to do this by dumping inserted table into a temporary table and passing the temp table. However, I need to do this for many tables, and don't want to list all the column names for each table/trigger (maintenance nightmare).
Can I dump the 'inserted' table to a temp table WITHOUT specifying the column names?
Hi all!In a insert-trigger I have two joins on the table named inserted.Obviously this construction gives a name collition beetween the twojoins (since both joins starts from the same table)Ofcourse I thougt the usingbla JOIN bla ON bla bla bla AS a_different_name would work, but itdoes not. Is there a nice solution to this problem?Any help appriciated
View 1 Replies View RelatedTrying to get my head around this table:
I thought it contained all data used in an insert; meaning if i enter a row in a table the inserted table should then contain all data entered?
Ive created multiple tables linked via primary key Learner_ID this key is unique to any/all students and can never be duplicated hence i thought i would use it to link the tables.
I have tables Fab / Main / Elec / Learner_info / WS_WR.
For Fab / Main / Elec the only data i need form Learner_info is the Learner_ID field, i simply used:
INSERT INTO FAB(Leaner_ID)
SELECT Learner_ID
FROM Inserted
as a trigger to insert the ID into these tables. Everything works perfectly fine. So i assumed that i would be able to use something very similar to insert say:
Learner_ID, FNAME, LNAME, ONAME and C_NUM from the learner_info table into the WR_WS table. Apparently i was wrong I can insert the learner_ID perfectly but if i then try to add another insert trigger eg: insert fname i get an sql error:
Cannot insert the value NULL into the column 'LEARNER_ID', table 'swdt_im.WS_WR'; column does not allow nulls. INSERT fails.
Now from reading the error it suggests to me that because the second trigger is running my learner_id value has become a NULL. Obviously a primary key wont accept this value so the statement fails.
What im struggling to understand, im sure i will solve the problem eventually but i would apreciate help, and this is most important to me rather than a solution is this:
If i enter data into a row on a table does that data go into the inserted table in the same row? or does the data go into inserted as a single entry row, meaning when i tab along from learner_ID into FNAME does Learner_ID become row 1 (in inserted) and FNAME the current row? or do they go into the appropriate columns?
I was under the assumption that i could enter:
LEARNER_ID / FNAME / LNAME / ONAME / C_NUM
into one table and have a trigger insert those values into multiple other tables. Dont suppose someone can help me out im alright querying a SQL db but ive never had to develop anything other than a single table one myself before
Thanks in advance