Hi All,
I am trying to insert symbols in a field of a table.
I am using the datatype nvarchar for the field.
However when i tried to insert a statement with the symbol pi, it comes out as following:
(A) 100? cm2 (B) 140? cm2 (C) 200? cm2
All the pi symbol are converted to ?.
Can ne 1 tell me how i can store such strings in the field.
Thanks
Hi All,
I am trying to insert symbols in a field of a table.
I am using the datatype nvarchar for the field.
However when i tried to insert a statement with the symbol pi, it comes out as following:
(A) 100? cm2 (B) 140? cm2 (C) 200? cm2
All the pi symbol are converted to ?.
Can ne 1 tell me how i can store such strings in the field.
Thanks
I am attempting to insert a trademark symbol„¢ into a database field but it is not working. Does anyone have any ideas on how to do this properly?
Any help would be very appreciated.
Hello...
I am going crazy trying to figure out how to do this. I have a flat file which I am massaging the data and loading into a table here is an example of a line out of the flat file:
"ABC NUTRITIONAL PRODUCTS","550","","","N","FAIR OAKS","","","COLORADO SPRINGS","C0","","","","","","","","A","","",""
My problem is that I have one field which is this address in a concatinated form. The fields that do not apply to this entry are suite#, floor# and other columns which are designated by the "" characters. The final concatinated addres field looks like this:
"550""""N""FAIR OAKS"""
I would like to remove the "" characters in the concatinated string. I just don't know the best way to do this? I was told DTS had a way of removing the "" from the flat file source. Since I have not used DTS extensively I am not sure if this is true. I was wondering how in SSIS I could go about removing the "" marks without removing the "" say if someone is quoted eg. John said "This is only a test". Removing the quotation marks in this instance would be changing the data. I am not sure how to do this and any help or advice is greatly appreciated!
Thank you...
I keep getting the following error message but I don't see what's wrong with my code
Server Error in '/Admin' Application.
Arithmetic overflow error converting expression to data type datetime.The statement has been terminated.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Arithmetic overflow error converting expression to data type datetime.The statement has been terminated.Source Error:
Line 147:cmdSql.Parameters.Add("@event_active","1")
Line 148:
Line 149:cmdSql.ExecuteNonQuery()
Line 150:
Line 151:pnlForm.Visible = FalseSource File: c:hostingwebhost4lifememberNYACOAadmincalendar.aspx Line: 149 Stack Trace:
[SqlException (0x80131904): Arithmetic overflow error converting expression to data type datetime.
The statement has been terminated.]
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +857466
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735078
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838
System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +149
System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +886
System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +132
System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +415
System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +135
ASP.calendar_aspx.SubmitForm(Object s, EventArgs E) in c:hostingwebhost4lifememberNYACOAadmincalendar.aspx:149
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
1 <%@ Register TagPrefix="cc1" Namespace="ManyMonkeys.Web.HtmlEditorLibrary.Controls" Assembly="HtmlEditorLibrary" %>
2 <%@ Page Language="VB" masterpagefile="nyacoaadmin.master" debug="true" %>
3 <%@ mastertype virtualpath="nyacoaadmin.master" %>
4 <%@ import Namespace="System" %>
5 <%@ import Namespace="System.Data" %>
6 <%@ import Namespace="System.Data.SqlClient" %>
7 <script runat="server">
8
9 Dim Connection As SqlConnection
10 Dim Sql As String
11 Dim cmdSql As SqlCommand
12 Dim dtr As SqlDataReader
13
14 Sub Page_Load
15
16 Connection = New SqlConnection(ConfigurationSettings.AppSettings("ConnectionString"))
17 Connection.Open()
18
19 If Not isPostback then
20
21 Sql = "SELECT chapter_id, chapter_name FROM chapter ORDER BY chapter_id"
22 cmdSql = New SqlCommand (Sql, Connection)
23 dtr = cmdSql.ExecuteReader()
24
25 ddlChapter.DataSource = dtr
26 ddlChapter.DataTextField = "chapter_name"
27 ddlChapter.DataValueField = "chapter_name"
28 ddlChapter.DataBind()
29
30 dtr.Close
31
32 ddlChapter.Items.Insert(0, New ListItem(" ", ""))
33
34 Call ShowList()
35
36 End If
37
38 End Sub
39
40 Sub Page_Unload
41
42 'Connection.Close()
43
44 End Sub
45
46 Sub ShowList()
47
48 Sql = "SELECT event_id, event_name, event_date, chapter_name FROM event WHERE event_active = '1' ORDER BY event_id"
49 cmdSql = New SqlCommand(sql, Connection)
50 dtr = cmdSql.ExecuteReader()
51
52 dgrdList.DataSource = dtr
53 dgrdList.DataBind()
54 dtr.Close()
55
56 pnlList.Visible = True
57
58 End Sub
59
60 Sub dgrdList_ItemCommand(s As Object, E As DataGridCommandEventArgs)
61
62 If e.CommandName = "edit" then
63 Call EditForm(dgrdList.DataKeys(e.Item.ItemIndex))
64 Else If e.CommandName = "delete" then
65 Call ConfirmDelete(dgrdList.DataKeys(e.Item.ItemIndex))
66 End If
67
68 End Sub
69
70 Sub ConfirmDelete(idVal As Integer)
71
72 pnlList.Visible = False
73 pnlConfirmDelete.Visible = True
74
75 sql = "SELECT event_name FROM event WHERE event_id = " & idVal
76 cmdSql = New SqlCommand(sql, connection)
77 litDelete.Text = cmdSql.ExecuteScalar()
78
79 ViewState("idVal") = idVal
80
81 End Sub
82
83 Sub DeleteForm (s As Object, E As Eventargs)
84
85 sql = "UPDATE event SET event_active = '0' WHERE event_id = " & ViewState("idVal")
86 cmdSql = New SqlCommand(sql, connection)
87 cmdSql.ExecuteNonQuery()
88
89 pnlList.Visible = True
90 pnlConfirmDelete.Visible = False
91
92 Call ShowList()
93
94 End Sub
95
96 Sub ShowCalendar(s As Object, E As ImageClickEventargs)
97
98 pnlEventDate.Visible = True
99
100 End Sub
101
102 Sub UpdateDate (s As Object, E As Eventargs)
103
104 pnlEventDate.Visible = False
105 txtEventDate.text=eventCalendar.SelectedDate.ToShortDateString()
106
107 End Sub
108
109 Sub SubmitForm (s As Object, E As Eventargs)
110
111 If ViewState("submitType") = "edit" then
112 sql = "UPDATE event SET event_name=@event_name, event_date=@event_date, chapter_name=@chapter_name, event_description=@event_description, event_last_updated_by=@event_last_updated_by, event_active=@event_active WHERE event_id = " & ViewState("idVal")
113 Else
114 sql = "INSERT INTO event (event_name, event_date, chapter_name, event_description, event_added_by, event_last_updated_by, event_active) VALUES (@event_name, @event_date, @chapter_name, @event_description, @event_added_by, @event_last_updated_by, @event_active)"
115 End If
116
117 cmdSql = New SqlCommand(sql, Connection)
118
119 If Len(txtEventName.Text) = 0 then
120 cmdSql.Parameters.Add("@event_name",DbNull.Value)
121 Else
122 cmdSql.Parameters.Add("@event_name",txtEventName.Text)
123 End If
124
125 If Len(txtEventDate.Text) = 0 then
126 cmdSql.Parameters.Add("@event_date",DbNull.Value)
127 Else
128 cmdSql.Parameters.Add("@event_date",txtEventDate.Text & " " & ddlEventHour.SelectedValue & ":" & ddlEventMinute.SelectedValue & " " & ddlEventAMPM.SelectedValue)
129 End If
130
131 If Len(ddlChapter.SelectedValue) = 0 then
132 cmdSql.Parameters.Add("@chapter_name",DbNull.Value)
133 Else
134 cmdSql.Parameters.Add("@chapter_name",ddlChapter.SelectedValue)
135 End If
136
137 If Len(txtEventDescription.Text) = 0 then
138 cmdSql.Parameters.Add("@event_description",DbNull.Value)
139 Else
140 cmdSql.Parameters.Add("@event_description",txtEventDescription.Text)
141 End If
142
143 cmdSql.Parameters.Add("@event_added_by",session("admin_username"))
144
145 cmdSql.Parameters.Add("@event_last_updated_by",session("admin_username"))
146
147 cmdSql.Parameters.Add("@event_active","1")
148
149 cmdSql.ExecuteNonQuery()
150
151 pnlForm.Visible = False
152 pnlList.Visible = True
153
154 Call ShowList()
155
156 End Sub
157
158 Sub AddForm(s As Object, E As Eventargs)
159
160 pnlForm.Visible = True
161 pnlList.Visible = False
162
163 txtEventName.Text = ""
164 txtEventDate.Text = ""
165 ddlChapter.ClearSelection()
166 txtEventDescription.Text = ""
167
168 ViewState("submitType") = "add"
169
170 End Sub
171
172 Sub EditForm (idVal As Integer)
173
174 pnlList.Visible = False
175 pnlForm.Visible = True
176
177 sql = "SELECT * FROM event WHERE event_id = " & idVal
178 cmdSql = New SqlCommand(sql, connection)
179 dtr = cmdSql.ExecuteReader()
180
181 If dtr.Read() then
182
183 txtEventName.Text = dtr("event_name") & ""
184 txtEventDate.Text = dtr("event_date") & ""
185 txtEventDescription.Text = dtr("event_description") & ""
186 ddlChapter.ClearSelection()
187 Try
188 ddlChapter.Items.FindByValue(dtr("chapter_name")).Selected = True
189 Catch Ex As Exception
190 End Try
191
192 End If
193
194 dtr.Close()
195
196 ViewState("submitType") = "edit"
197 ViewState("idVal") = idVal
198
199 End Sub
200
201 Sub DeleteCancel (s As Object, E As Eventargs)
202
203 pnlConfirmDelete.Visible = False
204 pnlList.Visible = True
205
206 End Sub
207
208 </script>
209
210 <asp:Content contentplaceholderid="cplhMainContent" runat="server">
211
212 <asp:Panel runat="server" id="pnlList" Visible="False">
213
214 <asp:DataGrid runat="server" id="dgrdList" AutoGenerateColumns="False" CellPadding="3" CellSpacing="0" width="550" Border="0" DataKeyField="event_id" onItemCommand="dgrdList_ItemCommand">
215 <HeaderStyle BackColor="#CDAD00" Font-Names="Tahoma,Arial,Helvetica,sans-serif" Font-Bold="true" Font-Size="10pt" HorizontalAlign="center" ForeColor="white" />
216 <ItemStyle BackColor="white" Font-Names="Tahoma,Arial,Helvetica,sans-serif" Font-Size="10pt" ForeColor="black" VerticalAlign="top" />
217 <AlternatingItemStyle BackColor="#dcdcdc" Font-Names="Tahoma,Arial,Helvetica,sans-serif" Font-Size="10pt" ForeColor="black" VerticalAlign="top" />
218 <Columns>
219 <asp:ButtonColumn Text="Edit" ButtonType="PushButton" CommandName="edit" />
220 <asp:ButtonColumn Text="Delete" ButtonType="PushButton" CommandName="delete" />
221 <asp:BoundColumn DataField="event_name" HeaderText="Event Name" />
222 <asp:BoundColumn DataField="event_date" HeaderText="Date" />
223 <asp:BoundColumn DataField="chapter_name" HeaderText="Sponsoring Chapter" />
224 </Columns>
225 </asp:DataGrid>
226
227 <asp:Button runat="server" Text="Add New Event" onClick="AddForm"></asp:Button>
228
229 </asp:Panel>
230
231 <asp:Panel runat="server" id="pnlForm" Visible="False">
232
233 Name of Event: <asp:TextBox id="txtEventName" runat="server"></asp:TextBox>
234 <br />Chapter: <asp:DropDownList id="ddlChapter" runat="server" AutoPostBack="False" />
235 <br />Date: <asp:TextBox id="txtEventDate" runat="server" ReadOnly="true" BackColor="Gray"></asp:TextBox> <asp:ImageButton id="CalButton" runat="server" OnClick="ShowCalendar" ImageUrl="images/cal.gif" />
236 <br /><asp:Panel runat="server" id="pnlEventDate" Visible="False">
237 <asp:Calendar id="eventCalendar" runat="server" FirstDayOfWeek="Sunday" Font-Names="Tahoma" Font-Size="8pt" OnSelectionChanged="UpdateDate">
238 <SelectedDayStyle BackColor="#EC9900" Font-Bold="True" />
239 <TodayDayStyle BackColor="#FFC0C0" />
240 <SelectorStyle Font-Names="Tahoma" Font-Size="8pt" />
241 <DayStyle Font-Names="Tahoma" Font-Size="8pt" />
242 <WeekendDayStyle BackColor="#E0E0E0" />
243 <OtherMonthDayStyle ForeColor="Silver" />
244 <DayHeaderStyle BackColor="#334B79" Font-Names="Tahoma" Font-Size="8pt" ForeColor="White" />
245 <TitleStyle BackColor="#CCCCFF" Font-Bold="True" Font-Names="Tahoma" Font-Size="10pt" />
246 </asp:Calendar>
247 <br />
248 </asp:Panel>
249 Time: <asp:DropDownList ID="ddlEventHour" runat="server" >
250 <asp:ListItem Text="12" Value="12" Selected="true"/>
251 <asp:ListItem Text="1" Value="1" />
252 <asp:ListItem Text="2" Value="2" />
253 <asp:ListItem Text="3" Value="3" />
254 <asp:ListItem Text="4" Value="4" />
255 <asp:ListItem Text="5" Value="5" />
256 <asp:ListItem Text="6" Value="6" />
257 <asp:ListItem Text="7" Value="7" />
258 <asp:ListItem Text="8" Value="8" />
259 <asp:ListItem Text="9" Value="9" />
260 <asp:ListItem Text="10" Value="10" />
261 <asp:ListItem Text="11" Value="11" />
262 </asp:DropDownList>
263 :
264 <asp:DropDownList ID="ddlEventMinute" runat="server">
265 <asp:ListItem Text="00" Value="00" Selected="true" />
266 <asp:ListItem Text="15" Value="15" />
267 <asp:ListItem Text="30" Value="30" />
268 <asp:ListItem Text="45" Value="45" />
269 </asp:DropDownList>
270 <asp:DropDownList ID="ddlEventAMPM" runat="server">
271 <asp:ListItem Text="AM" Value="AM" />
272 <asp:ListItem Text="PM" Value="PM" Selected="true" />
273 </asp:DropDownList>
274 <br /><br />
275 Content:
276 <br /><cc1:HtmlEditor id="txtEventDescription" runat="server" Height="300px" Width="575px"></cc1:HtmlEditor>
277 <br /><br />
278 <asp:Button onclick="SubmitForm" runat="server" Text="Submit"></asp:Button>
279
280 </asp:Panel>
281
282 <asp:Panel runat="server" id="pnlConfirmDelete" Visible="False">
283
284 Are you sure you wish to delete <asp:Literal runat="server" id="litDelete"></asp:Literal>?
285 <br /><br />
286 <asp:Button runat="server" Text="Yes - DELETE" onClick="DeleteForm"></asp:Button> <asp:Button runat="server" Text="No - GO BACK" onClick="DeleteCancel"></asp:Button>
287
288 </asp:Panel>
289
290 </asp:Content>
how do i add a new field and insert a value into it?
I'm importing data from another table into a new one, but my source table has a char field and the target filed is (int) can I add a new field to the source file and add a value to it? and how?
I have in my source table a field call companyName that contains text and the target table has a companyId which is an INT.
If I create a field call companyId and add a value of '1' depending on the value of CompanyName...
This is what i want ot do
if CompanyName = LA then insert 1 into new filed companyID
How can I do that? I have to do this for 100 or more tables. Can I write a script that will do that for me?
does it make sence?
Hello,
I'm trying to insert a string expression into a varbinary field. I've tried it several ways, but the data does not seem to get inserted.
I map DT_STR field ("T") with varbinary field in destination table and the package executes properly, but when I see the data that it has been loaded I only see empty values (0x).
I have also tried other approaches, like converting to DT_BYTES during SSIS flow, but I always get the same result.
Any idea of how to achieve this?
I have a table with the following schema:
CREATE TABLE [itis].[wrk_taxon_authors] (
[wb_taxon_author_id] [int] NOT NULL ,
[taxon_author_id] [int] IDENTITY (1, 1) NOT NULL ,
[taxon_author] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
[kingdom_id] [smallint] NOT NULL
) ON [PRIMARY]
GO
I am trying to insert the following data (as you can see fields are seperated with the | ):
19||Flores-Villela and Sánchez-H., 2003|5|
20||Wiegmann, 1828|5|
16|17482|Gray, 1838|5|
17|9823|(Wiegmann, 1828)|5|
I get the following error:Server: Msg 4869, Level 16, State 1, Line 1
Bulk Insert failed. Unexpected NULL value in data file row 1, column 2. Destination column (taxon_author_id) is defined NOT NULL.
Server: Msg 4869, Level 16, State 1, Line 1
Bulk Insert failed. Unexpected NULL value in data file row 2, column 2. Destination column (taxon_author_id) is defined NOT NULL.
Since I have defined column 2 as an identity column, I don't understand why SQL Query analyzer is upset when I do not have a value in that field. To me, I would think it would auto-insert an integer (starting at seed 1 and incrementing by 1), but it doesn't. Could someone tell me what I'm doing wrong?
I am trying to insert 1000000.00 into my sql table from a webpage. I as long as the amount is 999.99 or less it works fine, once higher then that amount it gives me an error.
Below is the code I am using to do the insert, it gets the error on the insert and the update both:
I am getting the error on the price inserting the FormatCurrency(txtprice.Text)
SelectStatement = "Insert crewchief (crewchief, price, car_num) Select '" & txtcrewchief.Text & "', " & FormatCurrency(txtprice.Text) & ", '" & txtcarnum.Text & "'"
Adapter.SelectCommand = New SqlClient.SqlCommand(SelectStatement, myConnection)
MyCommandBuilder = New SqlClient.SqlCommandBuilder(Adapter)
Adapter.Fill(MatcherDS, "temp")
Any ideas on why?
Thank you
I have a datetime field in a database which I am programmatically inserting values into. The field can be null or not null. However, I am having problems inserting NULL as part of my SQLCommand.
The value is pulled from a text box (linked to a calendar extender) and when I select a value it is being inserted fine. If I just leave the box blank though, I want the field to be set to NULL. I have tried adding in ,DBNULL.Value, as part of my VALUES(…) string, but this throws an exception. I Have tried just inserting ‘’ but that also throws an exception (“The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value�), so I don’t know how I can insert this value when the field is blank?
Can anyone shed some light please? Thanks
I have a field in a db table which is like a chat history.I need to update the field with a user's input (put into a multiline text box) and append that to the beginning of the field.The problem is that I want to maintain line breaks when I retrieve the field into a multiline textbox (aka textarea) and can't figure it out.I've searched around and have seen lots of solutions for converting line breaks into <br> tags, but those people are trying to output to a label.I'm using an update command in my SqlDataSource like this: UpdateCommand="UPDATE [account] SET [history] = @history + history WHERE [id] = 1"With a parameter declaration like this: <UpdateParameters> <asp:ControlParameter Name="history" ControlID="TextBox1" PropertyName="Text" /> </UpdateParameters>If I try to concatenate in a or CHR(10), the characters are literally inserted. Like this for example (this is the last variation I tried).... UpdateCommand="UPDATE [account] SET [history] = @history + CHR(10) + history WHERE [id] = 1"How do I store a CrLf programatically?
View 6 Replies View RelatedHello Everyone,
I have looked and looked for any information on how to insert data from a db into a text field using a stored procedure. If anyone has any helpful links or suggestions, my sanity would greatly appreciate the help.
Thank you
Hello,
I was wondering if someone could give me some insight to why i may be having this SQL 05 problem. I have setup a series of cells using say vchar(max). However when i go into add data in the table if I enter anything on of the word i.e. insert(Hello my name is) This red circle with an exclamation mark ( ! ) pops up and then if i continue to do another row it wont let me continue.
The message i get is
Error Source: .netSql Client Data provider
Error message: String or binary data would be truncated.
The statement has been terminated,
Then it says to fix this or press escape, i have never seen this before can help me out as I have no idea why this is happening.
Any help much appreciated.
HiI am trying to insert value retrieved from Now() into a datetime field in my MSDE database, but I am getting the following error, and I have no idea what is going wrong.Arithmetic overflow error converting expression to data type datetime.The statement has been terminated.Here is the code I am using:Dim user As String = MyContext.User.Identity.Name.ToString
Dim TimeDate As DateTime = Now()
Dim status As String = "Pending"
With SqlOrders.InsertParameters
.Item("UserName").DefaultValue = user
.Item("OrderDate").DefaultValue = TimeDate
.Item("Status").DefaultValue = status
End With
SqlOrders.Insert()The date is being returned in this format 23/03/2006 02:01:52, which is the same format as it should appear in the database. could anyone please tell me where I am going wrong?
Can some one please tell me how to update a field in a table with multiple
values for each of the values in the other fields?
Thanks in advance.
can we insert multiple values into the same field. as we do for the mailing list. that is can we use commas to enter multiple values into the same field
View 10 Replies View RelatedI need to insert rows into a table which contains a smallint field
for time. The times are stored in that colum as integers (898,
11345, 1259, etc.) How can I enter a time like 9:15 AM into this field? I know how to display integer data in hh:mm format but I'm stumped on how I can do the reverse.
Thanks for any help offered.
Can a bitmap be added to a Varbinary field using the INSERT statement. If not what other method can I use to add a photo image (bmp or gif) to my Sql database?
View 4 Replies View Relatedwhat i understand if if the data field is integer or money, not string, then i need to do a convert(datatype, value) in the insert but how come its still not working INSERT INTO [Product] ([Title], [Description], [Processor], [Motherboard], [Chipset], [RAM], [HDD], [OpticalDrive], [Graphics], [Sound], [Speakers], [LCD], [Keyboard], [Mouse], [Chassis], [PSU], [Price]) VALUES (@Title, @Description, @Processor, @Motherboard, @Chipset, @RAM, @HDD, @OpticalDrive, @Graphics, @Sound, @Speakers, @LCD, @Keyboard, @Mouse, @Chassis, @PSU, convert(smallmoney, @Price))
View 1 Replies View RelatedSee my code below... it nicely insert in database data...
but I wish: if user of program in field "txtPozicija" try insert in
database same data detail like is in "Pozicija" field in database that
he be stopped and informed by message: you can not insert TWO SAME data
in the "Pozicija" table.
any advice here?
I AM TRY SOLVE THIS LIKE BELOW, NO ERROR BUT NOT WORK
using System;
using System.Data;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Data.SqlClient;
public partial class adminpanel_Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
lblHR.Text = txtPozicija.Text;
lblEN.Text = txtLinkZaViseoMjestu.Text;
lblIT.Text = ddRegija.Text;
}
// On dropbox in the html added OnDataBound="MyDataBound" Occurs after the server control binds to a data source.
protected void myDataBound(Object sender, EventArgs e)
{
ddRegija.Items.Insert(0, "--- Selektiraj ---");
}
void SaveDataDB()
{
string ConnStr = ConfigurationManager.ConnectionStrings["croestate_dbConnectionString"].ConnectionString;
SqlConnection Conn = new SqlConnection(ConnStr);
try
{
Conn.Open();
String sqlQuery = "INSERT INTO PozicijaObjekta VALUES(@Pozicija, @LinkzaViseoMjestu, @Regija)";
SqlCommand cmd = new SqlCommand(sqlQuery, Conn);
cmd.Parameters.AddWithValue("@Pozicija", txtPozicija.Text);
cmd.Parameters.AddWithValue("@LinkzaViseoMjestu", txtLinkZaViseoMjestu.Text);
cmd.Parameters.AddWithValue("@Regija", ddRegija.SelectedValue);
cmd.ExecuteNonQuery();
}
catch (Exception ex)
{
Conn.Close();
Response.Write(ex.Message);
Wizard1.ActiveStepIndex = 0;
}
}
protected void Wizard1_NextButtonClick(object sender, WizardNavigationEventArgs e)
{
if (e.CurrentStepIndex == 0)
{
SaveDataDB();
}
if (e.CurrentStepIndex == 1)
{
//Register user into the database not hear because wizard have one step only
// SaveDataDB();
}
}
protected void CustomValidator1_ServerValidate(object source, ServerValidateEventArgs args)
{
if (ddRegija.SelectedIndex == 0)
args.IsValid = false;
}
protected void CustomValidatorPozicija_ServerValidate(object source, ServerValidateEventArgs args)
{
string ConnStr = ConfigurationManager.ConnectionStrings["croestate_dbConnectionString"].ConnectionString;
SqlConnection Conn = new SqlConnection(ConnStr);
try
{
Conn.Open();
String sqlQuery = "SELECT Pozicija FROM PozicijaObjekta WHERE Pozicija='" + txtPozicija.TemplateControl + "'";
SqlCommand cmd = new SqlCommand(sqlQuery, Conn);
SqlDataReader dr = cmd.ExecuteReader();
if (dr.Read() == true)
args.IsValid = false;
}
catch (Exception ex)
{
Conn.Close();
Response.Write(ex.Message);
Wizard1.ActiveStepIndex = 0;
}
}
}
Hi, I have a problem when I insert a date in a datetime field in a MSSQLServer.
That's my problem:
if the server is in english version, I have to insert date with this code:
DateTime.Today.ToString("MM/dd/yyyy")
instead if the server is in italian version, I have to insert date with this code:
DateTime.Today.ToString("dd/MM/yyyy")
Is there a way to insert a date in standard way, without knowing the server version?
bye and thanks in advance
Edited by SomeNewKid. Please post code between <code> and </code> tags.
This is probaly the easiest question you've ever read but here goes.
I have a simple checkbox value that i want to insert into the database but whatever i do it does not seem to let me.
Here is my code:
Sub AddSection_Click(Sender As Object, e As EventArgs)
Dim myCommand As SqlCommand
Dim insertCmd As String
' Build a SQL INSERT statement string for all the input-form
' field values.
insertCmd = "insert into Customers values (@SectionName, @SectionLink, @Title, @NewWindow, @LatestNews, @Partners, @Support);"
' Initialize the SqlCommand with the new SQL string.
myCommand = New SqlCommand(insertCmd, myConnection)
' Create new parameters for the SqlCommand object and
' initialize them to the input-form field values.
myCommand.Parameters.Add(New SqlParameter("@SectionName", SqlDbType.nVarChar, 50))
myCommand.Parameters("@SectionName").Value = Section_name.Value
myCommand.Parameters.Add(New SqlParameter("@SectionLink", SqlDbType.nVarChar, 80))
myCommand.Parameters("@SectionLink").Value = Section_link.Value
myCommand.Parameters.Add(New SqlParameter("@Title", SqlDbType.nVarChar, 50))
myCommand.Parameters("@Title").Value = Section_title.Value
If New_window.Checked = false Then
myCommand.Parameters.Add(New SqlParameter("@NewWindow", SqlDbType.bit, 1))
myCommand.Parameters("@NewWindow").Value = 0
else
myCommand.Parameters.Add(New SqlParameter("@NewWindow", SqlDbType.bit, 1))
myCommand.Parameters("@NewWindow").Value = 1
End If
If Latest_news.Checked = false Then
myCommand.Parameters.Add(New SqlParameter("@LatestNews", SqlDbType.bit, 1))
myCommand.Parameters("@LatestNews").Value = 0
else
myCommand.Parameters.Add(New SqlParameter("@LatestNews", SqlDbType.bit, 1))
myCommand.Parameters("@LatestNews").Value = 1
End If
If Partners.Checked = false Then
myCommand.Parameters.Add(New SqlParameter("@Partners", SqlDbType.bit, 1))
myCommand.Parameters("@Partners").Value = 0
else
myCommand.Parameters.Add(New SqlParameter("@Partners", SqlDbType.bit, 1))
myCommand.Parameters("@Partners").Value = 1
End If
If Support.Checked = false Then
myCommand.Parameters.Add(New SqlParameter("@Support", SqlDbType.bit, 1))
myCommand.Parameters("@Support").Value = 0
else
myCommand.Parameters.Add(New SqlParameter("@Support", SqlDbType.bit, 1))
myCommand.Parameters("@Support").Value = 1
End If
myCommand.Connection.Open()
' Test whether the new row can be added and display the
' appropriate message box to the user.
Try
myCommand.ExecuteNonQuery()
Message.InnerHtml = "Record Added<br>" & insertCmd
Catch ex As SqlException
If ex.Number = 2627 Then
Message.InnerHtml = "ERROR: A record already exists with " _
& "the same primary key"
Else
Message.InnerHtml = "ERROR: Could not add record, please " _
& "ensure the fields are correctly filled out"
Message.Style("color") = "red"
End If
End Try
myCommand.Connection.Close()
BindGrid()
End Sub
Any response would be appreciated
I have a colum of numbers, which datatype is nvarchar;
157853
4389
1999999999556
4568987
I need to insert a hyphen, 3 spaces from the right (to left) My numbers would look like this:
157-853
4-389
1999999999-556
4568-987
...do I use the rtrim function ?...what would the syntax look like ?
Thank you
I've just noticed some strange behavior that seems like a bug to me.
It's much easier to follow an example of it that to outright explain it, so here goes.
I have a table defined with a NOT NULL constraint on a column and a default clause:
-- DROP TABLE TestTable
CREATE TABLE TestTable ( TestField0 varchar(10), TestField1 varchar(10) NOT NULL DEFAULT ('a') )
I have a view defined on the table, in this example case, the view just mirrors the table one to one:
-- DROP VIEW TestView
CREATE VIEW TestView as SELECT TestField0, TestField1 FROM TestTable
So far so good, if I run this statement, it works as I would expect and inserts the value and the default goes into the other field:
INSERT INTO TestView (TestField0) SELECT 'test'
Now... If I add an INSTEAD OF trigger to the view, and have it perform the insert for me, I get an error with the same insert stmt:
-- DROP TRIGGER TestTrigger
CREATE TRIGGER TestTrigger ON TestView
INSTEAD OF INSERT AS
BEGIN
INSERT INTO TestTable (TestField0, TestField1)
SELECT TestField0, COALESCE(TestField1, 'X')
FROM inserted
END
Notice the trigger will ensure that a null value cannot be inserted into TestField1. If I run this insert stmt though I get an error:
INSERT INTO TestView (TestField0) SELECT 'test'
Server: Msg 233, Level 16, State 2, Line 1
The column 'TestField1' in table 'TestView' cannot be null.
Am I missing something or is this a bug?
Thanks
I have a stored procedure where I want to select all fields matchingthe query into another table. In addition, I want to add a commongroupID to each of the records that are being inserted into the secondtable.I can get the results that I want by using a temporary table but needto know if there is a way to do it directly..below is the code that uses the temporary table..CREATE TABLE #tempStore_DeliveryAddress ([AddressId] [int] IDENTITY (1, 1) NOT NULL ,[UserId] [int] NOT NULL ,[Title] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,[FirstName] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,[SpouseName] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,[MiddleName] [varchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,[SpouseMiddleName] [varchar] (10) COLLATESQL_Latin1_General_CP1_CI_AS NOT NULL ,[LastName] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,[SpouseLastName] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_ASNOT NULL ,[Suffix] [char] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,[SpouseSuffix] [char] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,[Company] [varchar] (64) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,[Address1] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,[Address2] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,[Address3] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,[City] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,[State] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,[PostalCode] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,[Country] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,[ForeignFlag] [int] NULL CONSTRAINT[DF_Store_DeliveryAddress_ForeignFlag] DEFAULT (0),[Email] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,[Greeting] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,[FullName] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,[ShortName] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,[OptOut] [int] NULL CONSTRAINT [DF_Store_DeliveryAddress_OptOut]DEFAULT (0),[Modified] [datetime] NULL CONSTRAINT[DF_Store_DeliveryAddress_Modified] DEFAULT (getdate()),[Modifer] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_Store_DeliveryAddress_Modifer] DEFAULT ('DBA'),[Created] [datetime] NULL CONSTRAINT[DF_Store_DeliveryAddress_Created] DEFAULT (getdate()),[Creator] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_Store_DeliveryAddress_Creator] DEFAULT ('DBA'),[MailListID] [int] NULL ,CONSTRAINT [PK_Store_DeliveryAddress] PRIMARY KEY CLUSTERED([AddressId]) ON [PRIMARY]) ON [PRIMARY]INSERT INTO #tempStore_DeliveryAddress([UserId], [Title], [FirstName],[SpouseName], [MiddleName], [SpouseMiddleName], [LastName],[SpouseLastName], [Suffix], [SpouseSuffix], [Company], [Address1],[Address2], [Address3], [City], [State], [PostalCode], [Country],[ForeignFlag], [Email], [Greeting], [FullName], [ShortName], [OptOut],[Modified], [Modifer], [Created], [Creator])(SELECT [UserId], [Title], [FirstName], [SpouseName], [MiddleName],[SpouseMiddleName], [LastName], [SpouseLastName], [Suffix],[SpouseSuffix], [Company], [Address1], [Address2], [Address3], [City],[State], [PostalCode], [Country], [ForeignFlag], [Email], [Greeting],[FullName], [ShortName], [OptOut], [Modified], [Modifer], [Created],[Creator]FROM [ntmportal].[dbo].[Store_AddressBook]WHERE [AddressID] in (Select AddressID From Store_AddressesForGroupwhere AddressGroupID = 322))UPDATE #tempStore_DeliveryAddress set MailLISTID = 422INSERT INTO Store_DeliveryAddress([UserId], [Title], [FirstName],[SpouseName], [MiddleName], [SpouseMiddleName], [LastName],[SpouseLastName], [Suffix], [SpouseSuffix], [Company], [Address1],[Address2], [Address3], [City], [State], [PostalCode], [Country],[ForeignFlag], [Email], [Greeting], [FullName], [ShortName], [OptOut],[Modified], [Modifer], [Created], [Creator], [MailListID])(Select [UserId], [Title], [FirstName], [SpouseName], [MiddleName],[SpouseMiddleName], [LastName], [SpouseLastName], [Suffix],[SpouseSuffix], [Company], [Address1], [Address2], [Address3], [City],[State], [PostalCode], [Country], [ForeignFlag], [Email], [Greeting],[FullName], [ShortName], [OptOut], [Modified], [Modifer], [Created],[Creator], [MailListID]FROM #tempStore_DeliveryAddress)
View 2 Replies View RelatedHi, I'm trying to store large strings to a database, so am using thetext field type (LongText). I have used this before when storing thehtml of a webpage, and was able to store more than 255 characters byusing just a normal update sql statement. Now I'm trying to store thebody of research papers, and must be doing something different, as Ican only store 255 characters.Can someone explain why SQL Server doesn't like what I am doing -should I be using the WriteText / UpdateText function? If so, pleaseexplain by example how I would do that, and why doing that works.Thanks so much,Iain
View 5 Replies View RelatedHow to modify values in a SQL Database. In the table PRDDEmpmaster there is a field called email_address, and for those fields that have a value I need to change that value to add { } opening/closing "curly braces" to that field.Â
For example,
RPARSONS@YAHOO.COM becomes
{RPARSONS@YAHOO.COM} . Nulls/empty fields remain as is.   Â
Using Server Explorer in VB 2005, I am manually entering data in a table in a SQL Server 2005 Express database that includes a DateTime field. I have tried every conceivable format, but no matter what I try get one of these 2 errors:
1. String was not recognized as valid DateTime
2. Operand type class; text incompatible with DateTime
I have Googled this to death, but no example which involves trying to enter the data manually, say from Server Explorer.
Formats tried include all datetime formats (mmddyy, yymmdd, using dashes or slashes, enclosing in single quotes or pound signs).
I would appreciate if someone could please give me an example that I can literally insert without error.
See attached image...
The columns are of type text
I made this insert stmt using a stored proc...
I mean the [text] field values from another table is converted to varchar(max) and then to VARBINARY(max) and then to HEX value.
Why this error only when I try to insert to this particular column [[Conclusions]] ?
Other columns ( of type text ) did not have this issue
Has anyone seen this issue before? We are running a SQL CE 3.5 database on a windows desktop. A couple of our tables have ntext fields. When we do an insert the statement updates the value for all rows, not just the one that was added. I can easily repro this with some of the online samples too. Try the following:
SqlCeConnection conn = new SqlCeConnection(_sConn);
conn.Open();
SqlCeCommand cmd = conn.CreateCommand();
cmd.CommandText = "CREATE TABLE BlobTable(name nvarchar(128), blob ntext);";
cmd.ExecuteNonQuery();
cmd.CommandText = "INSERT INTO BlobTable(name, blob) VALUES (@name, @blob);";
SqlCeParameter paramName = cmd.Parameters.Add("name", SqlDbType.NVarChar, 128);
SqlCeParameter paramBlob = cmd.Parameters.Add("blob", SqlDbType.NText);
paramName.Value = "Name1";
paramBlob.Value = "Name1 Memo";
cmd.ExecuteNonQuery();
cmd.CommandText = "INSERT INTO BlobTable(name, blob) VALUES (@name, @blob);";
SqlCeParameter paramName = cmd.Parameters.Add("name", SqlDbType.NVarChar, 128);
SqlCeParameter paramBlob = cmd.Parameters.Add("blob", SqlDbType.NText);
paramName.Value = "Name2";
paramBlob.Value = "Name2 Memo";
cmd.ExecuteNonQuery();
After the second execution the blob column in both rows will have the value 'Name2 Memo'.
This is obviously a huge problem for us and would appreciate it if someone can explain what is happening. Seems like a bug but would like to be certain before I go the support route.
Hi, Assume I have a table name "myTime". This table is simply only have 1 (one) DATETIME field "MyTestTime" (also serve as a primary number).Table MyTime- MyTestTime : SQLTYPE DATETIMETo insert a new row into this field, I simply wrote :SqlCommand sqlCommand = new SqlCommand("insert into MyTime values('2006-01-09')", sqlConnection);
I got the value of "2006-01-09" from a textbox or other relevan control.I realize when I try to use "SELECT * FROM MyTime" statement, MSSQL server 2000 automatically convert my date value from "2006-01-09" to "01/09/2006" (from YYYY-MM-DD to MM/DD/YYYY). I don't know why this one must be converted to MM/DD/YYYY automatically (I believe this behavior is depend on some "setting option" in my MSSQL server - but I don't know which one).The challenge is :In my country, the actual date format is like German Date format (DD-MM-YYY). Well I know this is only "Customization" problem. But how insert datetime value given from sql query to a datetime variable?// Connect to database, make a query, get the datareader result, and bla bla blaDateTime aDateTime = new DateTime;aDateTime = Convert.ToDateTime(myDataReader["PostDate"].ToString());// close connectionMy question isHow can I make sure that aDateTime's day is 09 not 01. How my program know that 09 is day not month. I can't use string.split() method because it's possible that my database setting will change from "mm-dd-yyyy" to "dd-mm-yyyy"thanks
I am creating a Project schedule using a stored procedure. The character is currently set to '>'. I would like to replace this with the 'black square', character code '25A0'. Is this possible?
Here's part of my code:
QBar = CASE WHEN EstStartDate >= @ZFromDate AND EstDeliveryDate <= @ZToDate
THEN Replicate(' ',Datediff(day,@ZFromDate,EstStartDate)) + Replicate('>',Datediff(day,EstStartDate,EstDeliveryDate) + 1)
(Running Access 2002 frontend)
Hi all,
I was told recently that doing the following:
SELECT ProductName ||' , '|| Category FROM PRODUCTS
would add parentheses around the ProductName field data. However, after trying it out for myself I found it did no such thing.
Does this look familiar to anyone? Is it syntax I have wrong or something?
Butterfly82