Sql server 2000 was installed to a default folder C:Program FilesMicrosoft SQL Server
And sql server 2005 was installed to the same location C:Program FilesMicrosoft SQL Server
how do i know which files are related to 2000 and which are related to 2005
please let me know
In sql 2000, during the installation an option was given to allow the installer to install to a different drive or path, however in sql 2005, I do not see an option. During the installation it does give you the option of installing via the command line interface, however this would be the last option. If this is the only method of installing sql 2005 for a different data drive path, then please provide the command line to do this. I've used the command line osql/isql to restore db's in sql 2000/msde and it's a pain.
View 3 Replies View RelatedI have question about install both default instance and name instance on to one server. Do I need follow a specific order such as default instance first then name instance?
If my server already has two or more name instances, can I install one more default instance?
Thanks
Hi,
I'm just looking into installing a second instance of SQL 2005 with SP2 on a W2K3 R2 machine that already contains a default instance, if i do so is the order of installation
1) Install named instance
2) Apply SP2 to the newly installed named instance
If i do this, will either of these require a system reboot ?
The default instance should remain operational if no reboot required as the service pack is for a specific instance in this case ?
Thanks in advance
P
Hello,
We got a problem, we have default instance of the SQL 2005, and it owns 1433 port. We need to install named instance of the SQL 2000, problem that it installs using port 1304, that is not default. Of course we can use this port in the connection string, but may be some sort of the solution exists?
Hi all, in my current environment, I have a single server SQL 2000 setup that's being replaced. I'm in the process of installing a new SQL 2005 cluster with the thought of taking advantage of 2005 mirroring and clustering, but have a few questions.
1. My thinking is that I can migrate my 2000 databases to 2005, but leave the databases in 8.0 (2000) mode. Are there any issues with this? I know they won't take advantage of the 2005 performance boost
2. Some of the apps don't support 2005 yet so I need to leave them in 2000 mode until they do. Is SQL 2005 fully backwards compatible with a SQL 2000 database?
3. Will mirroring work on SQL 2005 with a database that is still in 2000 mode?
Thanks for any assistance with this!
I have only SQL engine installed to my D drive. (SQL Server 2005 no SP1)
I want to install SSIS to my D drive but i can not.
It only gives me the option to install to the default drive C:...
saying that "the sql shared path has already been configured"
Is this a BUG ?
No Tools nor Notification Services are installed (which i understood to be related to the same path as SSIS)
thanks,
raviv
Hello, I have sql server 2000 personal edition on my PC and I have just got a 2005 DVD. I tried to install it but it is not working. I don't know how to manage my databases. As if there is no graphical managemnt tool. The 2005 is also Personal edition.
I reinstalled the sql 2000, and now I'm trying t upgrade to sql 2005, but still don't know how to do that.
Please someone help me!!!!!!!!!!
Hi;I feel like an idiot to be asking this,but how do I change the default drive and folderin which new databases are created?I've been looking all over Server Mgmt Studio,and I can't find anything. I'm thinking that someonecan tell me this off the top of their heads,or slip me a link to a web page.Thanks,
View 2 Replies View Related
Ive just installed VS2005 Pro and SQL Server Developer edition.
Now I want to set the default paths for project, templates, settings. But I want for both VS and SQL files.
For example, right now the default folders for SQL Studio are:
.My DocumentsSQL Server Management StudioProjects
.My DocumentsSQL Server Management StudioSettings
.My DocumentsSQL Server Management StudioTemplates
.My DocumentsSQL Server Management StudioBackup Files
... and so on.
For VS Studio:
.My DocumentsVisual Studio 2005Projects
.My DocumentsVisual Studio 2005Templates
.My DocumentsVisual Studio 2005Code Snippets
... and so on.
I would like for all sub-folders(from SQL Server and VS) to be in one same folder(Development), for example:
.My DocumentsDevelopmentProjects
.My DocumentsDevelopmentSettings
.My DocumentsDevelopmentTemplates
.My DocumentsDevelopmentBackup Files
.My DocumentsDevelopmentCode Snippets
... and so on.
I have tried changing in each application´s options the default path for each one, pointing to each folder I listed above.
My problem is that both VS and SQL Server still keeps creating folders in the old locations, for example: ".My DocumentsSQL Server Management StudioProjects". This example happens when I create a new query, and try to save it, it automatically creates that folder.
It only works for a few of them, like the settings folder. Ive managed to create a single folder for SQL and VS setting files.
Is there a way I can join both Application folders? I want to keep both projects files in one folder, both setting files in one folder, and so on...
I hope I explained well my situation.
Thanks!
Hello, when I log onto Report Manager web server using Windows Authentication, I need this user to be directed to a default sub folder.
For example: if I have folder A and sub folder 1 and 2. I need to be able to log in and be directed to sub folder 1. I was able to set up view role and access folder A. But then I need to click on folder 1 to view / create my reports.
Hey Community,
What are the guidelines for installing the SQL Software? Is it bottleneck if both Windows and SQL software are installed on the same drive ( I have all the database .mdfs and and .ldfs on a seperate RAID array)?
thanks,
Saptagiri Tangudu
PNT Marketing Services
i am working on upgrading the clients and server computers from 2000 MSDE to 2005 SQL Express Adv. Plan to upgrade using the template.ini.
i can find the version of sql server running on th server by @@version but how do i find the version of client connctivity components the computer has installed in order to ugrade?
1. somehow i need to know whether to upgrade a client computer CONNECTIVITY COMPONENTS from 2000 to 2005?
2. is there a way to enable tcp/ip in installation script of SQL Express?
THANKS
Is there a way to extract only installation files to install SQL 2012 client tools from complete media set. I'm interested in SQL MGMT Studio/Profiler/Data Quality services/Configuration tools.
View 2 Replies View RelatedHi every one,
I'd like to install SQL SERVER 2005 Express Edition ,I begin to install it from DVD but during the installation it dosn't ask me about any instance and after installation there isn't SQLExpress service and I can't use sql server .(there are not MSSQL and Binn directory in sql server 2005) but when I install visual studio 2005 and after that I install sql server 2005 it ask me for name of instance and with this way every thing is ok and I use sql server completely.
I 'd like to know the complete installation of sql server 2005 is depend on installation of visual studio 2005 befor it ?if not how can I introduce any instance after installation of sel server 2005 .
I have built an application that uses SQLExpress. When I build the setup with a new setup Project I include in the prerequisites SQLExpress so that if the target PC has no SQL server installed the setup sequence will automatically install an instance.
The Serup Sequence installes SQL Server with default Instance name and settings. I need to make the setup package to install the SQL instance with a specific name and some other setting. These settings would be
/qb ADDLOCAL=ALL SECURITYMODE=SQL SAPWD=pass INSTANCENAME=instname DISABLENETWORKPROTOCOLS=0
if i run it from Command Line.
I searched a lot on my own and didnt find any way of predefining these setting. Tnx in advance
Hello,
Our security center just scanned my database server and has asked that I change the database server from the default instance name and change the default port used. When installed MS SQL Server 2000 I used the default installation settings. I have installed SP4 and this is all running on a fully patched WIN 2003 Server machine. Is this possible without un-installing and then re-installing?
Thanks for any and all help.
Ben
HiWhen we installed SqlServer2000 we left the default collation name(Sql_Latin1_General_CPI_CI_AS).The user defined databases we created afterwards were defined with adifferent collation name in order to be able to accept the character setwe use, Hebrew.We are looking into switching DTSs that we use to copy data from ourmain system , that uses an Ingres database, into OSQL scripts. Althoughthe DTSs successfully copy the Hebrew letters when I copy data with OSQLit comes over as jibberish.After looking into the matter I came to the conclusion that while DTSrefers to specific databases and uses the destination database'scollation name , OSQL refers to the remote server and destination serverand therefore uses the collation name of the server and not of thedatabase. In order for it to successfully copy the Hebrew I need tochange the default collation name of the installation.Is "rebuild master" the way to do such a thing ? (this is a productionserver so we are wary of doing a "rebuild master")Has anyone else run into similar problems when transfering data betweenservers using OSQL ?ThanksDavid Greenberg
View 3 Replies View RelatedHello,
My WinCE device loads the Windows folder from NAND falsh on start-up and therefore I cannot install SQL into WindowsProgram files.
I would like to deploy SQLCE apps and dlls (from VS2005 or CAB file) into my NAND_Flash directory but I don't know how to do it.
Thx,
Uri
I am trying to install SQL Server 2005 Standard Edition in parallel with SQL Server 2000. The server is a Dell 2650 with 1 GB RAM running Windows 2000 Server.
The initial part of the setup runs the System Configuration Checker (SCC), which is generating this warning:
Default Installation Path Permission Requirement (Warning)
The server is a member of a domain, but I am logged in as the local administrator. The drive is not compressed. There are no file system problems. I am at a loss as to why this warning is occuring, and do not want to proceed until I figure this out.
(I got this warning on another server as well. That was a test server, so I proceeded. The engine seems to run ok, but SSIS will not load, says a component is missing. Not sure if the two issues are related or not).
Any ideas?
Thanks,
Mike
Hi
I am new to this sql server thing.And for last couple of days i m trying to figure out whether we can install sql server 2000 ent edition in a server after installing or upgrading sql server 2005 from (sql server 2000) . As sql server 2005 is know to exist side by side with earlier sql server versions .
And coming to the problem which i m facing is , I have installed sql server 2005 ent in windows 2000 server in which sql server 2000 is residing.Later when i observerd i realised that actually i have upgraded 2000 to sql 2005 server (which i hav done after consulting many people).As a result few of the client systems which were running sql server personal edition were unable to access their data from the database.For temporary relief i have installed sql server 2005 express edition plus management studio in the client systems . The doubts which i am having are
1) what happens if i uninstall sql server 2005
2) Is it possible to install sql server 2000 ent edition now to work along with sql server 2005
thanks in advance .....waiting for your quick replies ..any idea's
Hello,I received the error message below when i'm trying to install SQLServer 2000 standard edition into a Windows 2000 Professionaleworkstation.Error :Microsoft SQL server 2000 Standard Edition server components is notsupported on this operating system. Only client components will beavailable for installation.Any request modification ?Best regards,Thanks
View 1 Replies View RelatedI am trying to install microsoft sql server 2000 enterprise edition on a windows 2000 advance server. I keep getting error message
A previous program installation created pending file operations on the installation machine. You must restart the computer before running . I have restarted machine and no change.
What does error message mean and what is solution?
Hi Guys,
I have had SQL Server Express and Sql Server Management Studio Express installed on my machine for some time and recently tried to install a trial of SQL Server 2005 as well. (Yes, I'm migrating from Visual Studio Express to Visual Studio Professional, just as in tended!)
Everything went fine except that nothing seemed to be installed. I searched in all the obvious places - both on the Start/Programs menu and on the hard-drive: nothing.
A check under Add/Remove Programs showed that Sql Server 2005 Express was installed, but called SQL Server 2005.
So after a number of retries in which the install program kept saying that there was nothing to install, I selected every option under Advanced in the intall process. This resulted in stuff being installed and I now have SQL Server 2005 running on my machine, but no SQL Server Manager icon.
My questions are:
Where can I find the SQL Server Manager executeable?
Has anyone installed SQL Server Express, SQL Server Mangement Studio Express, SQL Server 2005 and SQL Server Management Studio on a single machine successfully? If so, what order did you install them in? (I'm planning on uninstalling everything SXQL Server related and starting again.)
Thanks very much for your help.
Regards
Gary
Hi,
We patched our servers last week and now, when connecting to our server remotely via Enterprise Manager (with DBO permissions), the management folder shows as empty. My guess is its permission related but, I'm not sure where to begin to correct the issue since we aren’t sure how it happened. Any help will be greatly appreciated.
~des
The box I am trying to connect to is running two instances of SQL Server.
There is a SQL Server 2005 instance which is the default. There is a SQL Server 2000 instance which is named 'SQLSERVER'.
I can connect to the SQL Server 2000 instance no problem:<add key="ConnectionString" value="server=MYPCSQLSERVER;database=mydatabase;user id=****;password=****" />
However, I am having trouble connecting to the Default SQL Server 2005 instance. I have tried:
<add key="ConnectionString" value="server=MYPC;database=mydatabase;user id=****;password=****" />
but it doesn't work. I have tried explicitly setting SQL Server 2005 to use port 1434 (as SQL Server 2000 is running on port 1433), and then used:
<add key="ConnectionString" value="server=MYPC,1434;database=mydatabase;user id=****;password=****" />
but this doesn't work either.
Am I mssing something here? Any help much appreciated
Thanks...
SQL server 20005 SP2 is install in my WIN XP machine. I implement a SSRS report and try to deliver the report to a share folder in window 2000 server.
I create and set permissions on a shared folder as per the information in http://msdn2.microsoft.com/en-us/library/ms345228.aspx. The account that I use in subscription is local admin account in the target machine.
I have try path \<servername>c$XXX and \<servername>XXX. Both is not ok.
I find following error message in the log file of reporting service.
ReportingServicesService!library!d!04/29/2008-00:03:40:: e ERROR: Throwing Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider+NetworkErrorException: A logon error occurred when attempting to access the file share. The user account or password is not valid., A logon error occurred when attempting to access the file share. The user account or password is not valid.;
Info: Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider+NetworkErrorException: A logon error occurred when attempting to access the file share. The user account or password is not valid. ---> System.Runtime.InteropServices.COMException (0x8007052E): Logon failure: unknown user name or bad password. (Exception from HRESULT: 0x8007052E)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at RSRemoteRpcClient.RemoteLogon.GetRemoteImpToken(String pRPCEndpointName, Int32 type, Guid dataSourceId, String pUserName, String pDomain, String pPassword)
at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.GetImpersonationToken(String userName, String domain, String userPwd)
--- End of inner exception stack trace ---
If I try to deliver same report to a share folder in WIN XP in the same way. It is ok.
I dont alot about sql server 2005(Express edition). For debugging purposes i want to copy the whole app_data folder(.mdf & .log files) on the production server to another folder on the same machine(or sometimes to a network folder). So when i copy and try to paste this App_data folder to a new location, i get this error message
"cannot copy ASPNETDB: it is being used by another person or program. close any programs that might be using the file and try again."
After reading the above message, i close visual web developer, stop the website in IIS and stop the SQLExpress service on the server and try again but still get the same message.
So how can i make sure that all the programs accessing these database files are closed such that i'm able able to copy them to a different location.
I know a WMI event watcher can be used to watch for a new file being added to a folder. However, I need to check for new folders being added to an existing folder. I haven't been able to find a post on doing this. Is there a way in WQL to check for a new folder being added instead of a new file? I've used SQL for years, but am new to SSIS.
View 2 Replies View Related
Ok,
I have a network folder called A
I have a SharePoint (2007) Document Library site called B. Web Client is enabled on the server and B is mapped as a Drive (let's call it Y for this discussion)
I want to move documents in A to B. Easy enough, right? Not so....
I first started by creating a batch file that issues a COPY \A \Y /Y at the command prompt. Viola! Worked Great!
I then moved that command to a SQL Agent job as a CMDExec statement (exact same statement) and attempted to run it.....CRASH! It found the files in A but then said "The system cannot find the path specified"
Ok, so I tried it in SSIS. CRASH! Checked the error log. Same thing...
So I then checked the account under which the SQl Agent was running (special domain account for all our SQL Servers). Thinking it might mater I changed it to run under my name (I'm in Domain admin). I also ensured I had permissions to the SPS 2007 library as well. (I did).
Ran again! CRASH! Same error....
So, I created a batch file , placed thec ommand in the batch file and ran that from the command prompt! Viola! Worked Great.
So, I was thinking of how ingenious I was as I pasted my C:RootCopy.bat into my SQL Agent job. With a big grin on my face I right clicked and picked "Start Job at step".......CRASH! Same error.
Does anyone have any ideas on this ???????????????
Thanks,
Stephen
I have a set of folders with the following structure:
MainFolder
1999
SpreadsheetA.xls
SpreadsheetB.xls
SpreadsheetC.xls
2000
SpreadsheetA.xls
SpreadsheetB.xls
SpreadsheetC.xls
etc.
Is there a way that I can use the foreach loop container to loop the sub folders? My plan was to get the folder name and path into a variable, use this to build the connection string for each file in this folder, carry out the upload for that folder, then move onto the next folder and do the same thing, but I cannot see a way to do this.
Thanks,
Sam
It seems SQL Server 2005 can store data in both C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData and C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLData. But what's the difference of the 2 folders? I accidentally found identical mdf files in the two folders and got confused. Thanks.
View 2 Replies View RelatedBackground information:
I have been researching BOL, this forum, and the SQL Server help: Working with Multiple versions installation documents since yesterday. We have an AMD x64 multi-processor IBM server running SQL Server 2000 under MS Windows 2003 Enterprise SP1. SQL Server is installed in the "c:program files (x86)" folder. I wanted to verify that we were indeed running the 32-bit version of SQL Server 2000 so I also ran the @@version command from isql and it returns:
Microsoft SQL Server 2000 - 8.00.2162 (Intel X86)
Goal:
We need to install SQL Server 2005 Enterprise Edition 64-bit in a side by side installation. We will be migrating the SQL 2000 x32 stuff over to SQL 2005 x64 at a later date. My research shows I should be able to do this without any issues.
Have I missed anything or does it look like I am ready to move forward?