Interesting Problem..related To Selection Criteria..

Apr 10, 2007

Have report where the user should be able to enter some selection critera to EXCLUDE from the result set displayed.



I deally Iwould liek to include it in the sql parameters to avoid retunring a larger then necessary result set, but Couldn't I also use it inthe filter criteria?



Has anyone done anything like this.



ie: a drop down box where people could add exclusions.



ie: Apples, Oranges



would be excluded from the result list.



So If I entered Apples, Oranges

the resultset would eclude these from the returned dataset.

I realize using a multi param box is fruitless. WOndering if there is another way to do this

View 1 Replies


ADVERTISEMENT

FROM Vs WHERE Selection Criteria

Jan 27, 2006

Hi,

While playing with SQL Server 2000 I found you can specify the selection criteria in either the FROM clause or the WHERE clause:
e.g.
select *
from Table1 a inner join Table2 b ON a.key = b.key and a.field = 1

Is logically the same as:
select *
from Table1 a inner join Table2 b ON a.key = b.key
where a.a = 1

Any comments on which is best, and why?

Thanks,

Chris

View 3 Replies View Related

Problem With Date In Selection Criteria

Apr 10, 2001

Hello All,

I am facing strange problem in SQL Server Query Analyzer, I am writing following query:
Select WorkItemKey,DateCreated,DateDue, DateCompleted from WorkItems Where DateCreated > '28/02/2001'

Query failed & gives following error:
Server: Msg 242, Level 16, State 3, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.

But if I write same query in this way:
Select WorkItemKey,DateCreated,DateDue, DateCompleted from WorkItems Where DateCreated > '2001-02-28'
OR
Select WorkItemKey,DateCreated,DateDue, DateCompleted from WorkItems Where DateCreated > '28/Feb/2001'


It works fine! Can anybody explain me why it is so???

Many thanks in advance…

Cheers,
Santosh

View 4 Replies View Related

Transact SQL :: Selection Criteria In DB1 - Need Fields In DB2

Sep 24, 2015

I need to query a table in Database 1 then, using a primary key, pull the columns from a table in Database 2.

The query I'm using in db_1 works:

SELECT * FROM db_1.table_1 WHERE  (hcpcs_cd = '20552' AND srvc_units_num>'1 ' AND claim_dos_yr >'2012') 

But what I really need are the columns associated with these records in db_2.table_1.  There is a primary key in both tables.

Ultimately what I need is all of the columns in db_2.table_1 and the hcpcs_cd, srvc_untis_num, and claim_dos_yr from db_1.table1

View 11 Replies View Related

Print Selection Criteria On Separate Page/report

Jul 17, 2007

I would like to print the selection criteria on a separate page or report. I explored various forums and help facilities without luck. Any suggestions please?

View 9 Replies View Related

SQL 2012 :: Design A Table To Hold Filters For Selection Criteria?

May 5, 2014

I have an ordering database with several tables that store data of orders belonging to a wide variety of clients. There is a generic report that I need to run which outputs the same data elements. However the criteria to select these orders will vary widely between each client. For e.g.

i) for client# 1 it could be all orders that are still open after 30 days of placing an order

(
OrderStatus = 'Open'
AND
GetDate() - OrderCreationDate >= 30
)

ii) for client# 2 it could be all orders that have been completed 60 days or earlier

(
OrderStatus = 'Completed'
AND
GetDate() - OrderCompletedDate >= 60
)

iii) for client# 3 it could be a combination of different things (all orders in West Region that are in hold status for more than 10 days + all orders in Eastern Region that are in shipping and are expected to be delivered in the next 2 days + all completed orders for the rest of the regions).

(
OrderRegion = 'West'
AND
OrderStatus = 'Hold'
AND
GetDate() - OrderHoldDate >= 10

[code].....

I want to have a stored procedure that selects all data and dynamically attach the where condition at the end for filtering. This way I wouldn't have to worry about any additions/changes that are made to the selection criteria. I can build an interface for admins who can use the UI to maintain the selection criteria and not worry about any code changes to accommodate it. I would like to design a table that holds this criteria. At this point in time, I am thinking of using key value pairs (Column Name, Column Value) but I am not sure how to implement multiple logical operators.

View 4 Replies View Related

Best Practice Question: JOIN Criteria Vs. WHERE Criteria

May 24, 2004

For example, consider the following queries:


DECLARE @SomeParam INT
SET @SomeParam = 44

SELECT *
FROM TableA A
JOIN TableB B ON A.PrimaryKeyID = B.ForeignKeyID
WHERE B.SomeParamColumn = @SomeParam

SELECT *
FROM TableA A
JOIN TableB B ON A.PrimaryKeyID = B.ForeignKeyID AND B.SomeParamColumn = @SomeParam


Both of these queries return the same result set, but the first query filters the results in the WHERE clause whereas the the second query filters the results in the JOIN criteria. Once upon a time a DBA told me that I should always use the syntax of the first query (WHERE clause). Is there any truth to this, and if so, why?

Thanks.

View 3 Replies View Related

Very Interesting !

Jun 12, 2004

Below is the statement given in MicroSoft SQL Server migration documentation :

"When a view is defined with an outer join and is queried with a qualification on a column from the inner table of the outer join, the results from SQL Server and Oracle can differ. In most cases, Oracle views are easily translated into SQL Server views"

Please can anyone explain the above with some examples. I don't find such a 'CREATE VIEW' statement existsing in two DBs, which results in different result set. Am I wrong ?

Thanks,
Sam

View 2 Replies View Related

Interesting

Aug 26, 2004

Another tech was having the same problem with his sp which he also made into a macro. He was having the same problem as I was, he thought since he made the user the dbo owner that he woud have no problems...but since hes the one who created the db and the stored procedures when the user tried to access it he got that same error message. It went away after he went into the Enterprise manager and in the properties of the stored procedure under permission he gave the user EXEC permissions...And WAAALLLAAA problem solved :):):):)

View 10 Replies View Related

Interesting SQL...

Oct 22, 2004

Anyone else experience this? A developer just finished complaining about the performance of one of our databases. Well, he sent me the query and I couldn't understand why it was such a dog. Anyways I rewrote it. The execution plan is totally different between the two. I had no idea specifying the join made such a difference. First sql executed in 7 minutes that 2nd took 1 second. SELECT dbo.contract_co.producer_num_id, contract_co_statusFROM dbo.contract_co, dbo.v_contract_co_statusWHERE ( dbo.v_contract_co_status.contract_co_id = dbo.contract_co.contract_co_id ) AND contract_co_status = 'Pending' OR ( contract_co_status = 'Active' and effective_date > '1/1/2004' )SELECT dbo.contract_co.producer_num_id, contract_co_statusFROM dbo.contract_co INNER JOIN dbo.v_contract_co_status ON dbo.contract_co.contract_co_id = dbo.v_contract_co_status.contract_co_idWHERE contract_co_status = 'Pending' OR ( contract_co_status = 'Active' and effective_date > '1/1/2004' )

View 3 Replies View Related

Interesting ID Issues...

Feb 1, 2007

Hi all,

I have a system in place currently that both a  local and a live database, currently the sales database is kept in line with a home grown "syncronise" script that controls keeping the two tables (live and local) in sync with the use of Local and Remote ID'sFor example;Table "Sales"ID - IntRemoteID - IntVarious Data fieldsThe 'Live' System writes new records using the RemoteID field, whilst the local inserts new records using the ID field. The Sync script copies the data up/down and assigns the corresponding RemoteID/ID's to the records as they are copied accordingly.Its been decided that this process must change, in favor of Two Way Replication. I have been tasked with finding the solution to the safe handling of ID's as theres a danger that two people can be writing a record (one live, one local) and possibly create the same ID's - i know that replication has its own ID's and could probably manage this well on its own, but these 'Internal' ID's have to be unique due to business rules.So i have been considering two possibilities to address this problem,1. Staggering the ID's - for instance Live ID's begin at 1,000,001 and local ID's begin at 1.2. Having a controlling ID table which provides the next IDBoth options have their advantages and disadvantages, with option 1 we will run into a problem later when the local ID's reach the 1 million mark (a few years away, i admit) and option 2 will need careful locking/transactional code to ensure the same ID isnt given twice.Does anyone have experience with this kind of issue? or could suggest an alternative approach to this problem?  Thanks in advance! 

View 2 Replies View Related

An Interesting Problem

Jan 3, 2001

We've had an interesting server issue here since about the start of the year, where the dual processor Netfinity server we've been running SQL 7 on has been holding steady at almost exactly 50% CPU utilization, give or take about 5%-10%. Disk utilization in all areas is relatively low. In fact, the server will do this right after a fresh reboot, with no users accessing. The really interesting part is that a graph of the two processors mirror each other. When the utilization of one goes up, the other goes down, almost perfectly. The two processors are the same speed, but their firmware build is different. IBM says it's not a problem. What say ye?

View 1 Replies View Related

Interesting Question!

Nov 28, 2001

If Query1 gives 1 row output as:

customer_id
1234
-------------------
Query2 gives 1 row output as:

product_id
8970
-------------------
How do we get the above results as a single result set of 2 columns side by side? as follows:

customer_id product_id
1234 8970


Is that possible in a single select statement??
Query1 and Query2 both are select statements on the same table with different where clauses.

Sheila.

View 2 Replies View Related

Interesting Problem

Jul 14, 1999

Hi ! I am facing an interesting problem for one of my databases. When I double click on a particular table in Enterprise Manager, the Manage Tables window shows me only one or two fields from the table. (it does not show me all the fields). When I run sp_help <tablename> in isql, all the information is displayed. Why is there such inconsistency. It happens only on one particular database. I have run DBCC commands but still no help. Does anyone have any ideas on this. Thankx,

View 3 Replies View Related

Interesting Challenge

Jul 12, 2005

We're having to work with some legacy data. The tables in the so-called database seem to have way more nulls than actual data. One table appears to have around 100 or more columns in it. It has close to 40,000 rows.

This Db has pretty much 0 normalization present.

IOW, your worst nightmare.

Is there a way we could run a query that would return the total number cells inthat contain NULL and another that could return the total number of data-bearing cells so we could come up with a % or a ratio.

View 9 Replies View Related

Folks ! Very Interesting !

Jun 8, 2004

Hi Folks,

This is a create table statement in DB2 z/ODS and OS/390 ( mainframe versions ) :

create table test(sno int) IN DATABASE database1 AUDIT NONE DATA CAPTURE NONE

This will create a table in the named database 'database1'.

1) In SQL Server, is there any equivalent for this 'IN DATABASE' syntax in DB2 ?

2) 'Data capture none' will not store any extra info about the data replication in the log files. Is there any eqiuivalent for this in SQL Server ?


Thanks,
Sam

View 1 Replies View Related

Interesting Error

Jan 10, 2008

In this SQL query I get en error like this:Incorrect syntax near ','.SELECT SUM(mCount * mPrice), CONVERT(DATEPART(yyyy, mDate), varchar) + '.' + CONVERT(DATEPART(mm, mDate), varchar) AS DateSoldFROM salesWHERE mDate BETWEEN '9/10/2007 0:0:0' AND '1/10/2008 23:59:59'I think you it isnt necessary to show values in the table because it is a syntax error but I dont undertand how it can be incorrect...Thanks for help...Saren Taşçıyan

View 14 Replies View Related

Interesting Problem

Jul 23, 2005

Imagine a table in Microsoft Sql Server 2000 named Pictures with threefields. A primary key ID(int), a Name(nvarchar) and a Picture(image)field.Lets put some records into the table. The first two fields as expectedwould take an int and a string. The third field is of type image.Instead of putting a bitmap in this field lets place an xml documentthat has been streamed into a byte array. The xml document woulddescribe the Picture using say lines. If the picture was that of asquare we would have four lines in the xml document. You could think ofthe xml document as something similar to vector graphics but thedetails are not relevant. The important fact is that the contents ofthe image field is NOT a bitmap but a binary stream of an xml document.Now imagine we have a reporting tool like Crystal Reports that can beused to report on this database table. Imagine we create a report byusing the three fields mentioned above. As far as Crystal is concernedthe first field is an int, the second a string and the third an image.If our table had ten records and we preview the report we like to see10 entries each consisting of an ID, Name and a Picture.This can only happen if the image field contains a Bitmap, but asmentioned above the field contains an xml document.Now my question...Can we write something in SQL Server 2000 (not 2005) to sit between thetable and Crystal Reports so to convert the XML document to a bitmap.The restriction is that we cannot use anything but sql server itself.The client in the above case has been Crystal Reports but it could beanything.I know SQL Server 2005 supports C# with access to the .NET frameworkwithin the database. Unfortunately, I am not using SQL server 2005.Some people have suggested the use of User Defined Functions and TSQL.I like to know from the more experienced SQL Server people if what I amtrying to achieve is possible. Maybe it has not been done but is itpossible?Any suggestions would be greatly appreciated...Many Regards

View 5 Replies View Related

Really Interesting Issue!

Sep 20, 2007



Hi All,

When I wanted to see ONLY today€™s records on the sql server, it took 5 minutes.
When I wanted to see records including today€™s records on the sql server, no problem. (19 Sep. is a past date which is working properly)
It is very interesting it takes 5 minutes to sort the lastday there is nothing wrong with the other days.
I ran DBCC INDEXDEFRAG method but no change anything.

I am wondering about something, everyday at 22:00 pm we are getting backup. Is this process creating a difference between before getting the back up and after got the backups?
It is really interesting issue. I do not know what I can say. It seems there is an issue with today€™s records. May be there are some locks on the today€™s records. I do not know. Why does not cause any issue for old dates but for current day ?



SELECT DISTINCT CallIDChar, ANI, DNIS, CallerName, AgentName, CallQueue, AgentID, CallType, CallStartTimeStamp, CallEndTimeStamp, CallDuration
FROM (SELECT MAINTBL.*, DRTTABLE.CallDuration AS CallDuration



FROM CallInfo AS MAINTBL

JOIN ( SELECT CallID, DateDiff(second, min(CallStartTimeStamp), max(CallEndTimeStamp)) as CallDuration


FROM CallInfo

GROUP BY CallID
) AS DRTTABLE ON MAINTBL.CallID=DRTTABLE.CallID
) as CallInfo

WHERE CallIDChar = CallIDChar


AND (CallStartTimeStamp >= '2007-09-20T00:00:00')

AND (CallStartTimeStamp <= '2007-09-20T23:59:59')

What can be reason for this issue and how can I solve it ?

Thank you in advance,

Melih

View 15 Replies View Related

An Interesting Bug For SSIS

Apr 12, 2007

I have a very simple SSIS package that imports data from ODBC source. There are two "Time" columns in source, but When this table is created in SQL2005, it give me "bigint"!!!



How can this happen?



I tried to import data to SQL2000, those two columns are created as "smalldatetime" properply.



Thanks.

View 11 Replies View Related

Interesting Challenge..

Aug 2, 2007

I am making a report in Visual Studio..Now my question is,is there anyway that i can add a tab control for my rdl??Hope to here from anyone out there with a know how..Thanks guys!!

View 13 Replies View Related

An Interesting Idea...

Jun 23, 2007

Having no more experience than reading books online, here is an interesting idea I would like to run by you guys and you can let me know if it is feasible or tell me I need to put the crack pipe down...



We are going to increase the number of disks in our SAN, and I was speaking with the SAN administrator and he mentioned the shuffling of logical drives to match the new space. He said he is going to have to go through quite a few combinations/permutations on figuring out the best configuration for what data goes on the old vs. new to get the optimal space.



Is this something that can be modeled out? I can write something that recursively figures it out, but why not explore fun ideas with tools that may be able to do it?



Thank you in advance,

John Hennesey

View 3 Replies View Related

Interesting SQL Injection Reported

May 26, 2008

All of you just read this article
http://www.bloombit.com/Articles/2008/05/ASCII-Encoded-Binary-String-Automated-SQL-Injection.aspx

View 1 Replies View Related

Interesting SQLProblem Using Joins

Sep 1, 2004

Using Join when 2 columns in one table point to 1 column in another table

I have spent hours on this problem and no research has turned in my favour. Does anyone have any examples they can put forward for me.

I am really desperate to sort this out, and any help will be greatly appreciated.

Thanks
Shaun

View 1 Replies View Related

About SmallDateTime Sthg. Interesting

May 25, 2006

Hello,
In the code  SqlParameter dtDate = new SqlParameter("@date",SqlDbType.SmallDateTime,4);
dtDate.Value=Convert.ToDateTime(Session["date"].ToString());
cmd.Parameters.Add(dtDate);where the @date parameter is defined as a SMALLDATETIME inside a stored procedure, I cannot use a function such as "Convert.ToSmallDateTime" and it seems a conversion from DateTime to SmallDateTime takes place anywhere within the code. Eventually it works but I wonder if everything's ok with this code. Is there anything wrong about it?  Thanks

View 2 Replies View Related

Interesting Grouping Question

Jan 23, 2002

I have an interesting request.
I would like to take a table such as:

date value
----- -----
1/1/01 10.5
1/2/01 9.3
1/3/01 11.5
1/4/01 4.7
1/5/01 3.2

and calculate an average for each record, based on its own value AND the following two values. In other words, for the first record, I would take
sum(10.5 + 9.3 + 11.5)/3 and put this into a third column in my table. I would then do the same for the next record: sum(9.3 + 11.5 + 4.7)/3.
Thanks in advance!

BV

Does anyone know how to do this in SQl.

View 2 Replies View Related

Interesting Peculiarity (another Anomaly?)

Dec 8, 2004

Run the following: declare @s1 varchar(10), @s2 varchar(10) declare @t table( recordid int identity(1,1)not null,field char(1)not null) insert @t (field) select 'a' union select 'b'select @s1 = '', @s2 = ''select @s1 = @s1 + field +',' from @t order by 1select @s2 = @s2 + field +','from @t order by recordidselect[Weird]=substring(@s1, 1,(datalength(@s1)-1)),[Not]=substring(@s2, 1,(datalength(@s2)-1))

View 2 Replies View Related

Interesting Math In A T-SQL Query

Oct 2, 2007


The value in the table of one DB is 17869 sq. ft. Now to insert this value in a new table of other database the reporting basis is 1000 i.e I need to do 17869/1000 = 17.8 so I have to take the value as 18. Another thing to be kept in mind is the value in the new table should have leading Zeroes. If the value is 18 it should be displayed as 0000018 ( data type in new table is Varchar(7) and in old table char (9) ). What can be the best way to implement this??

View 8 Replies View Related

Interesting IsNumeric Result

Aug 20, 2007

Does anyone else get the following result when running this query?


Select isnumeric('4D7')


-----------

1

(1 row(s) affected)




Does anyone know why this would return true for numeric?

Thanks,

Ray

View 4 Replies View Related

Help Writing A SELECT Query, Please. (Should Be Interesting For You!!!)

May 28, 2008

All- I would greatly appreciate some assistance in creating a SELECT statement for table headcount in the following problem:
First, find the schema here: http://home.pacbell.net/eulimi/schema_headcount.GIF
The problem:
Given a person_id (a record in the person table), list all headcount records WHERE:1) headcount.person_id = person.person_id AND2) the headcount.act_session_id belongs to a activity (from the activity_session table) that the person is allowed to attend by virture of the person's membership in a subexpedition.
Note that:
- A person can be a member of one or more circles (via the circle_person table)- Each circle belongs to exactly one subexpedition.- A persons who is a member of a subexpedition (via one or more circles) is entitled to sign up for one or more activities (activity_sessions) associated with the subexpedition.
So, put yet another way, the SELECT command should show, for a given person_id, the list of records in headcount that includes the activities (act_session_id) that the person is entitled to join by virtue of the persons membership in the subexpedition via his circle. (Whew!)
I hope this is enough information. I think the problem would be fun if I knew what I was doing. (SQL newbie here.) I suspect I need several INNER JOINs and a compound WHERE clause.
Thanks in advance!!!

View 5 Replies View Related

Interesting Variation Of Duplicate Check Help Please

Feb 9, 2007

Good morning all,

I have been tasked with an interesting problem using SQL 2005. Simplified it looks like this: I have two tables both well over a million rows, totalling unrelated keys between the tables. I need to find records in table one that do not exist in table two, the twist is this, I need to find rows where the invoice number in table 1 does not exist at all in table 2 or where the invoice number exists but the timestamp associated with the invoice in table 2 is more than 10secs different than the invoice/timestamp in table 1. I'm fairly new to sql and, although I can do the really simple stuff, this one is over my head I'm afraid. Any help at all would be greatly appreciated. I would also like to hear any suggestions regarding books that might give examples of sql code at around this level of difficulty. Thanks in advance for your assistance! Paul

View 6 Replies View Related

Interesting ! Update Query With Alias ?

Jul 29, 2004

Hi,

I have a below Oracle query :

UPDATE test1 a SETa.sno = 3

I need the equivalent SQL Server query for the above along with with alias name 'a' set for the table test1. Please advise.

Thanks,
Sam

View 3 Replies View Related

An Interesting Issue With Adding Columns.

Nov 7, 2006

I've written this procedure that is a meta data manager if you will. It looks at a vocabulary table and will create or alter tables to be in line with the meta data. It works great and has for a couple of years now. However, I just rewrote it in an effort to make it more compact, efficient, etc. Now, our system uses at least three databases. One contains shared data, the next holds only system data for the app like individual user settings, etc (atslogin is the name) then would be an actual database for client data or accounts as we call them. Clients could have one or 100 of those. Please, no comments about moving everything in to one DB as that is not always possible to to hierarchy of multiple business models.

Now, on to the issue. This procedure used to exists in the local database (one or many) now I keep it in atslogin so in effect, it looks "down" on all other databases and does it's thing. It adds columns, expands them, creates tables, views, keys blah blah blah.

Here is the issue. When it creates a new column the ordinal position is out of whack. I've got a table where I keep dropping the last column, run my procedure to add it and find that the ordinal position has increased by one each time. Add it and the value is 48 for example. Drop it and add it again and it is now 49 and all the while there is a gap between say 47 and 49. This is being written to syscolumns and the view INFORMATION_SCHEMA.[columns].

This is a big deal because if I find columns are out of order I wont attempt to alter the table. Trouble is the columns are in the proper order, I just can buy what the system is saying. Anyone ever seen this? Even if I add a column as the db owner I'm seeing this. This is SQL 2k. Below is the exact version

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Microsoft SQL Server 2000 - 8.00.760 (Intel X86)
Dec 17 2002 14:22:05
Copyright (c) 1988-2003 Microsoft Corporation
Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved